/*
- * Regulator driver for Rockchip RK808
+ * Regulator driver for Rockchip RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
+#define RK818_BUCK_VSEL_MASK 0x3f
+#define RK818_BUCK4_VSEL_MASK 0x1f
+#define RK818_LDO_VSEL_MASK 0x1f
+#define RK818_LDO3_ON_VSEL_MASK 0xf
+#define RK818_BOOST_ON_VSEL_MASK 0xe0
+
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
- int id = rdev->desc->id - RK808_ID_DCDC1;
+ int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int val;
int ret;
unsigned sel)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
- int id = rdev->desc->id - RK808_ID_DCDC1;
+ int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int reg = rdev->desc->vsel_reg;
unsigned old_sel;
unsigned int new_selector)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
- int id = rdev->desc->id - RK808_ID_DCDC1;
+ int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
/* if there is no dvs1/2 pin, we don't need wait extra time here. */
static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
- unsigned int reg = rk808_buck_config_regs[rdev->desc->id -
- RK808_ID_DCDC1];
+ unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
switch (ramp_delay) {
case 1 ... 2000:
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 16,
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
+ },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
+};
+
+static const struct regulator_desc rk818_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
+ .name = "DCDC_REG2",
+ .supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
+ .name = "DCDC_REG3",
+ .supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC3,
+ .ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
+ .n_voltages = 1,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
+ },
+ RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
+ RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
+ RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(4), 0),
+ RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(1), 400),
+ {
+ .name = "LDO_REG3",
.supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_LDO3,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
+ .n_voltages = 16,
+ .linear_ranges = rk808_ldo3_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
+ .vsel_reg = RK818_LDO3_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO3_ON_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
+ RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
+ RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
+ RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
+ RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
+ RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(5), 400),
+ RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
+ RK818_DCDC_EN_REG, BIT(6)),
+ RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
+ RK818_H5V_EN_REG, BIT(0)),
+ RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
+ RK818_DCDC_EN_REG, BIT(7)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
- int ret, i;
+ const struct regulator_desc *regulators;
+ int ret, i, nregulators;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
platform_set_drvdata(pdev, pdata);
- /* Instantiate the regulators */
- for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
+ switch (rk808->variant) {
+ case RK808_ID:
+ regulators = rk808_reg;
+ nregulators = RK808_NUM_REGULATORS;
+ break;
+ case RK818_ID:
+ regulators = rk818_reg;
+ nregulators = RK818_NUM_REGULATORS;
+ break;
+ default:
+ dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
+ rk808->variant);
+ return -EINVAL;
+ }
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk808->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk808->regmap;
+ /* Instantiate the regulators */
+ for (i = 0; i < nregulators; i++) {
rk808_rdev = devm_regulator_register(&pdev->dev,
- &rk808_reg[i], &config);
+ ®ulators[i], &config);
if (IS_ERR(rk808_rdev)) {
dev_err(&client->dev,
"failed to register %d regulator\n", i);
static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
- .name = "rk808-regulator",
- .owner = THIS_MODULE,
+ .name = "rk808-regulator"
},
};
module_platform_driver(rk808_regulator_driver);
-MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
-MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
-MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
+MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
projects / firefly-linux-kernel-4.4.55.git / blobdiff