/*
- * rk818 battery driver
+ * rk818 battery driver
*
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * */
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * chenjh <chenjh@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
-#include <linux/idr.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <asm/unaligned.h>
-#include <linux/gpio.h>
-#include <linux/proc_fs.h>
-#include <asm/uaccess.h>
-#include <linux/power/rk818_battery.h>
-#include <linux/mfd/rk818.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
+#include <linux/power/rk_usbbc.h>
+#include <linux/regmap.h>
#include <linux/rtc.h>
+#include <linux/timer.h>
#include <linux/wakelock.h>
+#include <linux/workqueue.h>
+#include "rk818_battery.h"
-/* if you want to disable, don't set it as 0, just be: "static int dbg_enable;" is ok*/
-static int dbg_enable;
-#define RK818_SYS_DBG 1
-
+static int dbg_enable = 0;
module_param_named(dbg_level, dbg_enable, int, 0644);
+
#define DBG(args...) \
do { \
if (dbg_enable) { \
} \
} while (0)
-
-#define DEFAULT_BAT_RES 135
-#define DEFAULT_VLMT 4200
-#define DEFAULT_ILMT 2000
-#define DEFAULT_ICUR 1600
-
-#define DSOC_DISCHRG_FAST_DEC_SEC 120 /*seconds*/
-#define DSOC_DISCHRG_FAST_EER_RANGE 25
-#define DSOC_CHRG_FAST_CALIB_CURR_MAX 400 /*mA*/
-#define DSOC_CHRG_FAST_INC_SEC 120 /*seconds*/
-#define DSOC_CHRG_FAST_EER_RANGE 25
-#define DSOC_CHRG_EMU_CURR 1000
-#define DSOC_CHG_TERM_CURR 500
-
-/*realtime RSOC calib param*/
-#define RSOC_DISCHG_ERR_LOWER 40
-#define RSOC_DISCHG_ERR_UPPER 50
-#define RSOC_ERR_CHCK_CNT 15
-#define RSOC_COMPS 20 /*compensation*/
-#define RSOC_CALIB_CURR_MAX 900 /*mA*/
-#define RSOC_CALIB_DISCHGR_TIME 3 /*min*/
-
-#define INTERPOLATE_MAX 1000
-#define MAX_INT 0x7FFF
-#define TIME_10MIN_SEC 600
-
-#define CHG_VOL_SHIFT 4
-#define CHG_ILIM_SHIFT 0
-#define CHG_ICUR_SHIFT 0
-
-int CHG_V_LMT[] = {4050, 4100, 4150, 4200, 4300, 4350};
-int CHG_I_CUR[] = {1000, 1200, 1400, 1600, 1800, 2000, 2250, 2400, 2600, 2800, 3000};
-int CHG_I_LMT[] = {450, 800, 850, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000};
-struct battery_info {
- struct device *dev;
- struct cell_state cell;
- struct power_supply bat;
- struct power_supply ac;
- struct power_supply usb;
- struct delayed_work work;
- /* struct i2c_client *client; */
- struct rk818 *rk818;
-
- struct battery_platform_data *platform_data;
-
- int work_on;
- int irq;
- int ac_online;
- int usb_online;
- int status;
+#define BAT_INFO(fmt, args...) pr_info("rk818-bat: "fmt, ##args)
+
+/* default param */
+#define DEFAULT_BAT_RES 135
+#define DEFAULT_SLP_ENTER_CUR 300
+#define DEFAULT_SLP_EXIT_CUR 300
+#define DEFAULT_SLP_FILTER_CUR 100
+#define DEFAULT_PWROFF_VOL_THRESD 3400
+#define DEFAULT_MONITOR_SEC 5
+#define DEFAULT_ALGR_VOL_THRESD1 3850
+#define DEFAULT_ALGR_VOL_THRESD2 3950
+#define DEFAULT_MAX_SOC_OFFSET 60
+#define DEFAULT_FB_TEMP TEMP_105C
+#define DEFAULT_POFFSET 42
+#define DEFAULT_COFFSET 0x832
+#define DEFAULT_SAMPLE_RES 20
+#define DEFAULT_ENERGY_MODE 0
+#define INVALID_COFFSET_MIN 0x780
+#define INVALID_COFFSET_MAX 0x980
+#define INVALID_VOL_THRESD 2500
+
+/* sample resistor and division */
+#define SAMPLE_RES_10MR 10
+#define SAMPLE_RES_20MR 20
+#define SAMPLE_RES_DIV1 1
+#define SAMPLE_RES_DIV2 2
+
+/* virtual params */
+#define VIRTUAL_CURRENT 1000
+#define VIRTUAL_VOLTAGE 3888
+#define VIRTUAL_SOC 66
+#define VIRTUAL_PRESET 1
+#define VIRTUAL_TEMPERATURE 188
+
+/* charge */
+#define FINISH_CHRG_CUR 1000
+#define TERM_CHRG_DSOC 88
+#define TERM_CHRG_CURR 600
+#define TERM_CHRG_K 650
+#define SIMULATE_CHRG_INTV 8
+#define SIMULATE_CHRG_CURR 400
+#define SIMULATE_CHRG_K 1500
+#define FULL_CHRG_K 400
+
+/* zero algorithm */
+#define PWROFF_THRESD 3400
+#define MIN_ZERO_DSOC_ACCURACY 10 /*0.01%*/
+#define MIN_ZERO_OVERCNT 100
+#define MIN_ACCURACY 1
+#define DEF_PWRPATH_RES 50
+#define WAIT_DSOC_DROP_SEC 15
+#define WAIT_SHTD_DROP_SEC 30
+#define ZERO_GAP_XSOC1 10
+#define ZERO_GAP_XSOC2 5
+#define ZERO_GAP_XSOC3 3
+#define ZERO_LOAD_LVL1 1400
+#define ZERO_LOAD_LVL2 600
+
+#define ADC_CALIB_THRESHOLD 4
+#define ADC_CALIB_LMT_MIN 3
+#define NTC_CALC_FACTOR 7
+
+/* time */
+#define POWER_ON_SEC_BASE 1
+#define MINUTE(x) ((x) * 60)
+
+/* sleep */
+#define SLP_CURR_MAX 40
+#define SLP_CURR_MIN 6
+#define DISCHRG_TIME_STEP1 MINUTE(10)
+#define DISCHRG_TIME_STEP2 MINUTE(60)
+#define SLP_DSOC_VOL_THRESD 3600
+#define REBOOT_PERIOD_SEC 180
+#define REBOOT_MAX_CNT 80
+
+/* fcc */
+#define MIN_FCC 500
+
+struct rk818_battery {
+ struct platform_device *pdev;
+ struct rk808 *rk818;
+ struct regmap *regmap;
+ struct device *dev;
+ struct power_supply *bat;
+ struct battery_platform_data *pdata;
+ struct workqueue_struct *bat_monitor_wq;
+ struct delayed_work bat_delay_work;
+ struct delayed_work calib_delay_work;
+ struct wake_lock wake_lock;
+ struct notifier_block fb_nb;
+ struct timer_list caltimer;
+ struct timeval rtc_base;
+ int bat_res;
+ int chrg_status;
+ bool is_initialized;
+ bool is_first_power_on;
+ u8 res_div;
int current_avg;
- int current_offset;
-
- uint16_t voltage;
- uint16_t voltage_ocv;
- uint16_t relax_voltage;
- u8 charge_status;
- u8 otg_status;
- int pcb_ioffset;
- bool pcb_ioffset_updated;
- unsigned long queue_work_cnt;
- u32 term_chg_cnt;
- u32 emu_chg_cnt;
-
- uint16_t warnning_voltage;
-
- int design_capacity;
+ int voltage_avg;
+ int voltage_ocv;
+ int voltage_relax;
+ int voltage_k;
+ int voltage_b;
+ int remain_cap;
+ int design_cap;
+ int nac;
int fcc;
int qmax;
- int remain_capacity;
- int nac;
- int temp_nac;
-
- int real_soc;
- int display_soc;
- int odd_capacity;
- int temp_soc;
-
- int est_ocv_vol;
- int est_ocv_soc;
- u8 err_chck_cnt;
- int err_soc_sum;
- int bat_res_update_cnt;
- int soc_counter;
-
- int dod0;
- int dod0_status;
- int dod0_voltage;
- int dod0_capacity;
- unsigned long dod0_time;
- u8 dod0_level;
- int enter_flatzone;
- int exit_flatzone;
-
- int time2empty;
- int time2full;
-
- int *ocv_table;
- int *res_table;
-
- int current_k;/* (ICALIB0, ICALIB1) */
- int current_b;
-
- int voltage_k;/* VCALIB0 VCALIB1 */
- int voltage_b;
-
- int update_k;
- int line_k;
- int voltage_old;
-
- int q_dead;
- int q_err;
- int q_shtd;
-
- u8 check_count;
- /* u32 status; */
- struct timeval soc_timer;
- struct timeval change_timer;
-
- int vol_smooth_time;
- int charge_smooth_time;
-
- int suspend_capacity;
- int resume_capacity;
- struct timespec suspend_time;
- struct timespec resume_time;
- unsigned long suspend_time_start;
- unsigned long count_sleep_time;
-
- unsigned long dischrg_sum_sleep_sec;
- unsigned long dischrg_sum_sleep_capacity;
- int suspend_temp_soc;
- int sleep_status;
- int suspend_charge_current;
- int resume_soc;
- int bat_res;
- bool bat_res_updated;
- bool charge_smooth_status;
- bool resume;
- unsigned long last_plugin_time;
- bool sys_wakeup;
-
- unsigned long charging_time;
- unsigned long discharging_time;
- unsigned long finish_time;
-
- u32 charge_min;
- u32 discharge_min;
- u32 finish_min;
- struct notifier_block battery_nb;
- struct workqueue_struct *wq;
- struct delayed_work battery_monitor_work;
- struct delayed_work charge_check_work;
- int charge_otg;
-
- struct wake_lock resume_wake_lock;
-
- int debug_finish_real_soc;
- int debug_finish_temp_soc;
- int chrg_min[10];
- int chg_v_lmt;
- int chg_i_lmt;
- int chg_i_cur;
+ int dsoc;
+ int rsoc;
+ int poffset;
+ int age_ocv_soc;
+ bool age_allow_update;
+ int age_level;
+ int age_ocv_cap;
+ int age_voltage;
+ int age_adjust_cap;
+ unsigned long age_keep_sec;
+ int zero_timeout_cnt;
+ int zero_remain_cap;
+ int zero_dsoc;
+ int zero_linek;
+ u64 zero_drop_sec;
+ u64 shtd_drop_sec;
+ int sm_remain_cap;
+ int sm_linek;
+ int sm_chrg_dsoc;
+ int sm_dischrg_dsoc;
+ int algo_rest_val;
+ int algo_rest_mode;
+ int sleep_sum_cap;
+ int sleep_remain_cap;
+ unsigned long sleep_dischrg_sec;
+ unsigned long sleep_sum_sec;
+ bool sleep_chrg_online;
+ u8 sleep_chrg_status;
+ bool adc_allow_update;
+ int fb_blank;
+ bool s2r; /*suspend to resume*/
+ u32 work_mode;
+ int temperature;
+ u32 monitor_ms;
+ u32 pwroff_min;
+ unsigned long finish_base;
+ unsigned long boot_base;
+ unsigned long flat_match_sec;
+ unsigned long plug_in_base;
+ unsigned long plug_out_base;
+ u8 halt_cnt;
+ bool is_halt;
+ bool is_max_soc_offset;
+ bool is_sw_reset;
+ bool is_ocv_calib;
+ int last_dsoc;
+ int dbg_cap_low0;
+ int dbg_pwr_dsoc;
+ int dbg_pwr_rsoc;
+ int dbg_pwr_vol;
+ int dbg_chrg_min[10];
+ int dbg_meet_soc;
+ int dbg_calc_dsoc;
+ int dbg_calc_rsoc;
};
-struct battery_info *g_battery;
-u32 support_uboot_chrg;
+#define DIV(x) ((x) ? (x) : 1)
+
+static u64 get_boot_sec(void)
+{
+ struct timespec ts;
+
+ get_monotonic_boottime(&ts);
-extern int dwc_vbus_status(void);
-extern int get_gadget_connect_flag(void);
-extern int dwc_otg_check_dpdm(void);
-extern void kernel_power_off(void);
-extern int rk818_set_bits(struct rk818 *rk818, u8 reg, u8 mask, u8 val);
-extern unsigned int irq_create_mapping(struct irq_domain *domain,
- irq_hw_number_t hwirq);
-extern void rk_send_wakeup_key(void);
-static void update_battery_info(struct battery_info *di);
+ return ts.tv_sec;
+}
-#define SUPPORT_USB_CHARGE
+static unsigned long base2sec(unsigned long x)
+{
+ if (x)
+ return (get_boot_sec() > x) ? (get_boot_sec() - x) : 0;
+ else
+ return 0;
+}
+static unsigned long base2min(unsigned long x)
+{
+ return base2sec(x) / 60;
+}
static u32 interpolate(int value, u32 *table, int size)
{
- uint8_t i;
- uint16_t d;
+ u8 i;
+ u16 d;
for (i = 0; i < size; i++) {
if (value < table[i])
}
if ((i > 0) && (i < size)) {
- d = (value - table[i-1]) * (INTERPOLATE_MAX/(size-1));
- d /= table[i] - table[i-1];
- d = d + (i-1) * (INTERPOLATE_MAX/(size-1));
+ d = (value - table[i - 1]) * (MAX_INTERPOLATE / (size - 1));
+ d /= table[i] - table[i - 1];
+ d = d + (i - 1) * (MAX_INTERPOLATE / (size - 1));
} else {
- d = i * ((INTERPOLATE_MAX+size/2)/size);
+ d = i * ((MAX_INTERPOLATE + size / 2) / size);
}
if (d > 1000)
return d;
}
-/* Returns (a * b) / c */
+
+/* (a*b)/c */
static int32_t ab_div_c(u32 a, u32 b, u32 c)
{
bool sign;
u32 ans = MAX_INT;
- int32_t tmp;
-
- sign = ((((a^b)^c) & 0x80000000) != 0);
+ int tmp;
+ sign = ((((a ^ b) ^ c) & 0x80000000) != 0);
if (c != 0) {
if (sign)
c = -c;
-
- tmp = ((int32_t) a*b + (c>>1)) / c;
-
+ tmp = (a * b + (c >> 1)) / c;
if (tmp < MAX_INT)
ans = tmp;
}
return ans;
}
-static int32_t abs_int(int32_t x)
+static int rk818_bat_read(struct rk818_battery *di, u8 reg)
{
- return (x > 0) ? x : -x;
-}
+ int ret, val;
-static int abs32_int(int x)
-{
- return (x > 0) ? x : -x;
-}
+ ret = regmap_read(di->regmap, reg, &val);
+ if (ret)
+ dev_err(di->dev, "read reg:0x%x failed\n", reg);
+ return val;
+}
-static int battery_read(struct rk818 *rk818, u8 reg, u8 buf[], unsigned len)
+static int rk818_bat_write(struct rk818_battery *di, u8 reg, u8 buf)
{
int ret;
- ret = rk818_i2c_read(rk818, reg, len, buf);
+ ret = regmap_write(di->regmap, reg, buf);
+ if (ret)
+ dev_err(di->dev, "i2c write reg: 0x%2x error\n", reg);
+
return ret;
}
-static int battery_write(struct rk818 *rk818, u8 reg, u8 const buf[], unsigned len)
+static int rk818_bat_set_bits(struct rk818_battery *di, u8 reg, u8 mask, u8 buf)
{
int ret;
- ret = rk818_i2c_write(rk818, reg, (int)len, *buf);
+
+ ret = regmap_update_bits(di->regmap, reg, mask, buf);
+ if (ret)
+ dev_err(di->dev, "write reg:0x%x failed\n", reg);
+
return ret;
}
-static void dump_gauge_register(struct battery_info *di)
-{
- int i = 0;
- char buf;
- DBG("%s dump charger register start: \n", __func__);
- for (i = 0xAC; i < 0xDF; i++) {
- battery_read(di->rk818, i, &buf, 1);
- DBG(" the register is 0x%02x, the value is 0x%02x\n ", i, buf);
- }
- DBG("demp end!\n");
-}
-static void dump_charger_register(struct battery_info *di)
+static int rk818_bat_clear_bits(struct rk818_battery *di, u8 reg, u8 mask)
{
+ int ret;
- int i = 0;
- char buf;
- DBG("%s dump the register start: \n", __func__);
- for (i = 0x99; i < 0xAB; i++) {
- battery_read(di->rk818, i, &buf, 1);
- DBG(" the register is 0x%02x, the value is 0x%02x\n ", i, buf);
- }
- DBG("demp end!\n");
+ ret = regmap_update_bits(di->regmap, reg, mask, 0);
+ if (ret)
+ dev_err(di->dev, "clr reg:0x%02x failed\n", reg);
+ return ret;
}
-#if RK818_SYS_DBG
-
-static uint16_t _get_OCV_voltage(struct battery_info *di);
-static int _voltage_to_capacity(struct battery_info *di, int voltage);
-static int _get_realtime_capacity(struct battery_info *di);
-static void power_on_save(struct battery_info *di, int voltage);
-static void _capacity_init(struct battery_info *di, u32 capacity);
-static void battery_poweron_status_init(struct battery_info *di);
-static void flatzone_voltage_init(struct battery_info *di);
-static int _get_FCC_capacity(struct battery_info *di);
-static void _save_FCC_capacity(struct battery_info *di, u32 capacity);
-static int _get_soc(struct battery_info *di);
-static int _get_average_current(struct battery_info *di);
-static int rk_battery_voltage(struct battery_info *di);
-static uint16_t _get_relax_vol1(struct battery_info *di);
-static uint16_t _get_relax_vol2(struct battery_info *di);
-static void update_battery_info(struct battery_info *di);
-
-static ssize_t bat_state_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct battery_info *di = g_battery;
- u8 status;
- u8 rtc_val;
- u8 soc_reg;
- u8 shtd_time;
-
- battery_read(di->rk818, SUP_STS_REG, &status, 1);
- battery_read(di->rk818, SOC_REG, &soc_reg, 1);
- battery_read(di->rk818, 0x00, &rtc_val, 1);
- di->voltage_ocv = _get_OCV_voltage(di);
- _voltage_to_capacity(di, di->voltage_ocv);
- battery_read(di->rk818, NON_ACT_TIMER_CNT_REG, &shtd_time, 1);
-
- return sprintf(buf, "-----------------------------------------------------------------------------\n"
- "volt = %d, ocv_volt = %d, avg_current = %d, remain_cap = %d, ocv_cap = %d\n"
- "real_soc = %d, temp_soc = %d\n"
- "fcc = %d, FCC_REG = %d, shutdown_time = %d\n"
- "usb_online = %d, ac_online = %d\n"
- "SUP_STS_REG(0xc7) = 0x%02x, RTC_REG = 0x%02x\n"
- "voltage_k = %d, voltage_b = %d, SOC_REG = 0x%02x\n"
- "relax_volt1 = %d, relax_volt2 = %d\n"
- "---------------------------------------------------------------------------\n",
- rk_battery_voltage(di), di->voltage_ocv, _get_average_current(di), _get_realtime_capacity(di), di->temp_nac,
- di->real_soc, _get_soc(di),
- di->fcc, _get_FCC_capacity(di), shtd_time,
- di->usb_online, di->ac_online,
- status, rtc_val,
- di->voltage_k, di->voltage_b, soc_reg,
- _get_relax_vol1(di), _get_relax_vol2(di));
-}
-
-static ssize_t bat_reg_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct battery_info *di = g_battery;
- u8 sup_tst_reg, ggcon_reg, ggsts_reg, vb_mod_reg;
- u8 usb_ctrl_reg, chrg_ctrl_reg1;
- u8 chrg_ctrl_reg2, chrg_ctrl_reg3, rtc_val;
-
- battery_read(di->rk818, GGCON, &ggcon_reg, 1);
- battery_read(di->rk818, GGSTS, &ggsts_reg, 1);
- battery_read(di->rk818, SUP_STS_REG, &sup_tst_reg, 1);
- battery_read(di->rk818, VB_MOD_REG, &vb_mod_reg, 1);
- battery_read(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- battery_read(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- battery_read(di->rk818, CHRG_CTRL_REG2, &chrg_ctrl_reg2, 1);
- battery_read(di->rk818, CHRG_CTRL_REG3, &chrg_ctrl_reg3, 1);
- battery_read(di->rk818, 0x00, &rtc_val, 1);
-
- return sprintf(buf, "\n------------- dump_debug_regs -----------------\n"
- "GGCON = 0x%2x, GGSTS = 0x%2x, RTC = 0x%2x\n"
- "SUP_STS_REG = 0x%2x, VB_MOD_REG = 0x%2x\n"
- "USB_CTRL_REG = 0x%2x, CHRG_CTRL_REG1 = 0x%2x\n"
- "CHRG_CTRL_REG2 = 0x%2x, CHRG_CTRL_REG3 = 0x%2x\n"
- "---------------------------------------------------------------------------\n",
- ggcon_reg, ggsts_reg, rtc_val,
- sup_tst_reg, vb_mod_reg,
- usb_ctrl_reg, chrg_ctrl_reg1,
- chrg_ctrl_reg2, chrg_ctrl_reg3
- );
-}
-static ssize_t bat_fcc_read(struct device *dev, struct device_attribute *attr, char *buf)
+static void rk818_bat_dump_regs(struct rk818_battery *di, u8 start, u8 end)
{
- struct battery_info *di = g_battery;
+ int i;
- return sprintf(buf, "%d", di->fcc);
-}
-static ssize_t bat_soc_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct battery_info *di = g_battery;
+ if (!dbg_enable)
+ return;
- return sprintf(buf, "%d", di->real_soc);
+ DBG("dump regs from: 0x%x-->0x%x\n", start, end);
+ for (i = start; i < end; i++)
+ DBG("0x%x: 0x%0x\n", i, rk818_bat_read(di, i));
}
-static ssize_t bat_soc_write(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static bool rk818_bat_chrg_online(struct rk818_battery *di)
{
- int val;
- int ret;
- struct battery_info *di = g_battery;
-
- ret = sscanf(buf, "%d", &val);
- di->real_soc = val;
+ u8 buf;
- return count;
-}
-static ssize_t bat_temp_soc_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct battery_info *di = g_battery;
+ buf = rk818_bat_read(di, RK818_VB_MON_REG);
- return sprintf(buf, "%d", di->temp_soc);
+ return (buf & PLUG_IN_STS) ? true : false;
}
-static ssize_t bat_temp_soc_write(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int rk818_bat_get_coulomb_cap(struct rk818_battery *di)
{
- int val;
- int ret;
- u32 capacity;
- struct battery_info *di = g_battery;
+ int val = 0;
- ret = sscanf(buf, "%d", &val);
- capacity = di->fcc*val/100;
- _capacity_init(di, capacity);
- di->temp_soc = _get_soc(di);
- di->remain_capacity = _get_realtime_capacity(di);
+ val |= rk818_bat_read(di, RK818_GASCNT3_REG) << 24;
+ val |= rk818_bat_read(di, RK818_GASCNT2_REG) << 16;
+ val |= rk818_bat_read(di, RK818_GASCNT1_REG) << 8;
+ val |= rk818_bat_read(di, RK818_GASCNT0_REG) << 0;
- return count;
+ return (val / 2390) * di->res_div;
}
-static ssize_t bat_voltage_read(struct device *dev, struct device_attribute *attr, char *buf)
+static int rk818_bat_get_rsoc(struct rk818_battery *di)
{
- struct battery_info *di = g_battery;
+ int remain_cap;
- return sprintf(buf, "%d", di->voltage);
+ remain_cap = rk818_bat_get_coulomb_cap(di);
+ return (remain_cap + di->fcc / 200) * 100 / DIV(di->fcc);
}
-static ssize_t bat_avr_current_read(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t bat_info_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct battery_info *di = g_battery;
+ char cmd;
+ struct rk818_battery *di = dev_get_drvdata(dev);
- return sprintf(buf, "%d", di->current_avg);
-}
+ sscanf(buf, "%c", &cmd);
-static ssize_t bat_remain_capacity_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct battery_info *di = g_battery;
+ if (cmd == 'n')
+ rk818_bat_set_bits(di, RK818_MISC_MARK_REG,
+ FG_RESET_NOW, FG_RESET_NOW);
+ else if (cmd == 'm')
+ rk818_bat_set_bits(di, RK818_MISC_MARK_REG,
+ FG_RESET_LATE, FG_RESET_LATE);
+ else if (cmd == 'c')
+ rk818_bat_clear_bits(di, RK818_MISC_MARK_REG,
+ FG_RESET_LATE | FG_RESET_NOW);
+ else if (cmd == 'r')
+ BAT_INFO("0x%2x\n", rk818_bat_read(di, RK818_MISC_MARK_REG));
+ else
+ BAT_INFO("command error\n");
- return sprintf(buf, "%d", di->remain_capacity);
+ return count;
}
static struct device_attribute rk818_bat_attr[] = {
- __ATTR(state, 0664, bat_state_read, NULL),
- __ATTR(regs, 0664, bat_reg_read, NULL),
- __ATTR(fcc, 0664, bat_fcc_read, NULL),
- __ATTR(soc, 0664, bat_soc_read, bat_soc_write),
- __ATTR(temp_soc, 0664, bat_temp_soc_read, bat_temp_soc_write),
- __ATTR(voltage, 0664, bat_voltage_read, NULL),
- __ATTR(avr_current, 0664, bat_avr_current_read, NULL),
- __ATTR(remain_capacity, 0664, bat_remain_capacity_read, NULL),
+ __ATTR(bat, 0664, NULL, bat_info_store),
};
-#endif
-
-static uint16_t get_relax_voltage(struct battery_info *di);
-
-static ssize_t show_state_attrs(struct device *dev,
- struct device_attribute *attr, char *buf)
+static void rk818_bat_enable_gauge(struct rk818_battery *di)
{
- struct battery_info *data = g_battery;
-
- if (0 == get_relax_voltage(data)) {
- return sprintf(buf,
- "voltage = %d, remain_capacity = %d, status = %d\n",
- data->voltage, data->remain_capacity,
- data->status);
+ u8 buf;
- } else
- return sprintf(buf,
- "voltage = %d, remain_capacity = %d, status = %d\n",
- get_relax_voltage(data), data->remain_capacity,
- data->status);
+ buf = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ buf |= GG_EN;
+ rk818_bat_write(di, RK818_TS_CTRL_REG, buf);
}
-static ssize_t restore_state_attrs(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
+static void rk818_bat_save_age_level(struct rk818_battery *di, u8 level)
{
- return size;
+ rk818_bat_write(di, RK818_UPDAT_LEVE_REG, level);
}
-static struct device_attribute rkbatt_attrs[] = {
- __ATTR(state, 0664, show_state_attrs, restore_state_attrs),
-};
-static int create_sysfs_interfaces(struct device *dev)
+static u8 rk818_bat_get_age_level(struct rk818_battery *di)
{
- int liTmep;
-
- for (liTmep = 0; liTmep < ARRAY_SIZE(rkbatt_attrs); liTmep++) {
- if (device_create_file(dev, rkbatt_attrs + liTmep))
- goto error;
- }
+ return rk818_bat_read(di, RK818_UPDAT_LEVE_REG);
+}
- return 0;
+static int rk818_bat_get_vcalib0(struct rk818_battery *di)
+{
+ int val = 0;
-error:
- for (; liTmep >= 0; liTmep--)
- device_remove_file(dev, rkbatt_attrs + liTmep);
+ val |= rk818_bat_read(di, RK818_VCALIB0_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_VCALIB0_REGH) << 8;
- dev_err(dev, "%s:Unable to create sysfs interface\n", __func__);
- return -1;
+ DBG("<%s>. voffset0: 0x%x\n", __func__, val);
+ return val;
}
-static int debug_reg(struct battery_info *di, u8 reg, char *reg_name)
+static int rk818_bat_get_vcalib1(struct rk818_battery *di)
{
- u8 val;
+ int val = 0;
- battery_read(di->rk818, reg, &val, 1);
- DBG("<%s>: %s = 0x%2x\n", __func__, reg_name, val);
+ val |= rk818_bat_read(di, RK818_VCALIB1_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_VCALIB1_REGH) << 8;
+
+ DBG("<%s>. voffset1: 0x%x\n", __func__, val);
return val;
}
-
-static int _gauge_enable(struct battery_info *di)
+static int rk818_bat_get_ioffset(struct rk818_battery *di)
{
- int ret;
- u8 buf;
-
- ret = battery_read(di->rk818, TS_CTRL_REG, &buf, 1);
- if (ret < 0) {
- dev_err(di->dev, "error reading TS_CTRL_REG");
- return ret;
- }
- if (!(buf & GG_EN)) {
- buf |= GG_EN;
- ret = battery_write(di->rk818, TS_CTRL_REG, &buf, 1); /* enable */
- ret = battery_read(di->rk818, TS_CTRL_REG, &buf, 1);
- return 0;
- }
+ int val = 0;
- DBG("%s, %d\n", __func__, buf);
- return 0;
+ val |= rk818_bat_read(di, RK818_IOFFSET_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_IOFFSET_REGH) << 8;
+ DBG("<%s>. ioffset: 0x%x\n", __func__, val);
+ return val;
}
-static void save_level(struct battery_info *di, u8 save_soc)
-{
- u8 soc;
- soc = save_soc;
- battery_write(di->rk818, UPDAT_LEVE_REG, &soc, 1);
-}
-static u8 get_level(struct battery_info *di)
+static int rk818_bat_get_coffset(struct rk818_battery *di)
{
- u8 soc;
+ int val = 0;
- battery_read(di->rk818, UPDAT_LEVE_REG, &soc, 1);
- return soc;
+ val |= rk818_bat_read(di, RK818_CAL_OFFSET_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_CAL_OFFSET_REGH) << 8;
+
+ DBG("<%s>. coffset: 0x%x\n", __func__, val);
+ return val;
}
-static int _get_vcalib0(struct battery_info *di)
+static void rk818_bat_set_coffset(struct rk818_battery *di, int val)
{
- int ret;
- int temp = 0;
u8 buf;
- ret = battery_read(di->rk818, VCALIB0_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, VCALIB0_REGH, &buf, 1);
- temp |= buf<<8;
+ if ((val < INVALID_COFFSET_MIN) || (val > INVALID_COFFSET_MAX)) {
+ BAT_INFO("set invalid coffset=0x%x\n", val);
+ return;
+ }
- DBG("%s voltage0 offset vale is %d\n", __func__, temp);
- return temp;
+ buf = (val >> 8) & 0xff;
+ rk818_bat_write(di, RK818_CAL_OFFSET_REGH, buf);
+ buf = (val >> 0) & 0xff;
+ rk818_bat_write(di, RK818_CAL_OFFSET_REGL, buf);
+ DBG("<%s>. coffset: 0x%x\n", __func__, val);
}
-static int _get_vcalib1(struct battery_info *di)
+static void rk818_bat_init_voltage_kb(struct rk818_battery *di)
{
- int ret;
- int temp = 0;
- u8 buf;
+ int vcalib0, vcalib1;
- ret = battery_read(di->rk818, VCALIB1_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, VCALIB1_REGH, &buf, 1);
- temp |= buf<<8;
+ vcalib0 = rk818_bat_get_vcalib0(di);
+ vcalib1 = rk818_bat_get_vcalib1(di);
+ di->voltage_k = (4200 - 3000) * 1000 / DIV(vcalib1 - vcalib0);
+ di->voltage_b = 4200 - (di->voltage_k * vcalib1) / 1000;
- DBG("%s voltage1 offset vale is %d\n", __func__, temp);
- return temp;
+ DBG("voltage_k=%d(*1000),voltage_b=%d\n", di->voltage_k, di->voltage_b);
}
-static int _get_ioffset(struct battery_info *di)
+static int rk818_bat_get_ocv_voltage(struct rk818_battery *di)
{
+ int vol, val = 0;
- int ret;
- int temp = 0;
- u8 buf;
+ val |= rk818_bat_read(di, RK818_BAT_OCV_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_OCV_REGH) << 8;
- ret = battery_read(di->rk818, IOFFSET_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, IOFFSET_REGH, &buf, 1);
- temp |= buf<<8;
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
- return temp;
+ return vol;
}
-static uint16_t _get_cal_offset(struct battery_info *di)
+static int rk818_bat_get_avg_voltage(struct rk818_battery *di)
{
- int ret;
- uint16_t temp = 0;
- u8 buf;
+ int vol, val = 0;
- ret = battery_read(di->rk818, CAL_OFFSET_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, CAL_OFFSET_REGH, &buf, 1);
- temp |= buf<<8;
+ val |= rk818_bat_read(di, RK818_BAT_VOL_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_VOL_REGH) << 8;
- return temp;
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
+
+ return vol;
}
-static int _set_cal_offset(struct battery_info *di, u32 value)
-{
- int ret;
- u8 buf;
- buf = value&0xff;
- ret = battery_write(di->rk818, CAL_OFFSET_REGL, &buf, 1);
- buf = (value >> 8)&0xff;
- ret = battery_write(di->rk818, CAL_OFFSET_REGH, &buf, 1);
+static bool is_rk818_bat_relax_mode(struct rk818_battery *di)
+{
+ u8 status;
- return 0;
+ status = rk818_bat_read(di, RK818_GGSTS_REG);
+ if (!(status & RELAX_VOL1_UPD) || !(status & RELAX_VOL2_UPD))
+ return false;
+ else
+ return true;
}
-static void _get_voltage_offset_value(struct battery_info *di)
+
+static u16 rk818_bat_get_relax_vol1(struct rk818_battery *di)
{
- int vcalib0, vcalib1;
+ u16 vol, val = 0;
- vcalib0 = _get_vcalib0(di);
- vcalib1 = _get_vcalib1(di);
+ val |= rk818_bat_read(di, RK818_RELAX_VOL1_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_RELAX_VOL1_REGH) << 8;
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
- di->voltage_k = (4200 - 3000)*1000/(vcalib1 - vcalib0);
- di->voltage_b = 4200 - (di->voltage_k*vcalib1)/1000;
- DBG("voltage_k = %d(x1000) voltage_b = %d\n", di->voltage_k, di->voltage_b);
+ return vol;
}
-static uint16_t _get_OCV_voltage(struct battery_info *di)
-{
- int ret;
- u8 buf;
- uint16_t temp;
- uint16_t voltage_now = 0;
-
- ret = battery_read(di->rk818, BAT_OCV_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, BAT_OCV_REGH, &buf, 1);
- temp |= buf<<8;
- if (ret < 0) {
- dev_err(di->dev, "error read BAT_OCV_REGH");
- return ret;
- }
+static u16 rk818_bat_get_relax_vol2(struct rk818_battery *di)
+{
+ u16 vol, val = 0;
- voltage_now = di->voltage_k*temp/1000 + di->voltage_b;
+ val |= rk818_bat_read(di, RK818_RELAX_VOL2_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_RELAX_VOL2_REGH) << 8;
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
- return voltage_now;
+ return vol;
}
-static int rk_battery_voltage(struct battery_info *di)
+static u16 rk818_bat_get_relax_voltage(struct rk818_battery *di)
{
- int ret;
- int voltage_now = 0;
- u8 buf;
- int temp;
+ u16 relax_vol1, relax_vol2;
- ret = battery_read(di->rk818, BAT_VOL_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, BAT_VOL_REGH, &buf, 1);
- temp |= buf<<8;
-
- if (ret < 0) {
- dev_err(di->dev, "error read BAT_VOL_REGH");
- return ret;
- }
+ if (!is_rk818_bat_relax_mode(di))
+ return 0;
- voltage_now = di->voltage_k*temp/1000 + di->voltage_b;
+ relax_vol1 = rk818_bat_get_relax_vol1(di);
+ relax_vol2 = rk818_bat_get_relax_vol2(di);
- return voltage_now;
+ return relax_vol1 > relax_vol2 ? relax_vol1 : relax_vol2;
}
-/* OCV Lookup table
- * Open Circuit Voltage (OCV) correction routine. This function estimates SOC,
- * based on the voltage.
- */
-static int _voltage_to_capacity(struct battery_info *di, int voltage)
+static int rk818_bat_get_avg_current(struct rk818_battery *di)
{
- u32 *ocv_table;
- int ocv_size;
- u32 tmp;
+ int cur, val = 0;
- ocv_table = di->platform_data->battery_ocv;
- ocv_size = di->platform_data->ocv_size;
- di->warnning_voltage = ocv_table[3];
- tmp = interpolate(voltage, ocv_table, ocv_size);
- di->temp_soc = ab_div_c(tmp, MAX_PERCENTAGE, INTERPOLATE_MAX);
- di->temp_nac = ab_div_c(tmp, di->fcc, INTERPOLATE_MAX);
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGH) << 8;
- return 0;
+ if (val & 0x800)
+ val -= 4096;
+ cur = val * di->res_div * 1506 / 1000;
+
+ return cur;
}
-static uint16_t _get_relax_vol1(struct battery_info *di)
+static int rk818_bat_vol_to_ocvsoc(struct rk818_battery *di, int voltage)
{
- int ret;
- u8 buf;
- uint16_t temp = 0, voltage_now;
+ u32 *ocv_table, temp;
+ int ocv_size, ocv_soc;
- ret = battery_read(di->rk818, RELAX_VOL1_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, RELAX_VOL1_REGH, &buf, 1);
- temp |= (buf<<8);
+ ocv_table = di->pdata->ocv_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ ocv_soc = ab_div_c(temp, MAX_PERCENTAGE, MAX_INTERPOLATE);
- voltage_now = di->voltage_k*temp/1000 + di->voltage_b;
-
- return voltage_now;
+ return ocv_soc;
}
-static uint16_t _get_relax_vol2(struct battery_info *di)
+static int rk818_bat_vol_to_ocvcap(struct rk818_battery *di, int voltage)
{
- int ret;
- uint16_t temp = 0, voltage_now;
- u8 buf;
+ u32 *ocv_table, temp;
+ int ocv_size, cap;
- ret = battery_read(di->rk818, RELAX_VOL2_REGL, &buf, 1);
- temp = buf;
- ret = battery_read(di->rk818, RELAX_VOL2_REGH, &buf, 1);
- temp |= (buf<<8);
+ ocv_table = di->pdata->ocv_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ cap = ab_div_c(temp, di->fcc, MAX_INTERPOLATE);
- voltage_now = di->voltage_k*temp/1000 + di->voltage_b;
-
- return voltage_now;
+ return cap;
}
-static int _get_raw_adc_current(struct battery_info *di)
+static int rk818_bat_vol_to_zerosoc(struct rk818_battery *di, int voltage)
{
- u8 buf;
- int ret;
- int current_now;
-
- ret = battery_read(di->rk818, BAT_CUR_AVG_REGL, &buf, 1);
- if (ret < 0) {
- dev_err(di->dev, "error reading BAT_CUR_AVG_REGL");
- return ret;
- }
- current_now = buf;
- ret = battery_read(di->rk818, BAT_CUR_AVG_REGH, &buf, 1);
- if (ret < 0) {
- dev_err(di->dev, "error reading BAT_CUR_AVG_REGH");
- return ret;
- }
- current_now |= (buf<<8);
-
- if (ret < 0) {
- dev_err(di->dev, "error reading BAT_CUR_AVG_REGH");
- return ret;
- }
+ u32 *ocv_table, temp;
+ int ocv_size, ocv_soc;
- return current_now;
+ ocv_table = di->pdata->zero_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ ocv_soc = ab_div_c(temp, MAX_PERCENTAGE, MAX_INTERPOLATE);
+ return ocv_soc;
}
-static void reset_zero_var(struct battery_info *di)
+static int rk818_bat_vol_to_zerocap(struct rk818_battery *di, int voltage)
{
- di->update_k = 0;
- di->q_err = 0;
- di->voltage_old = 0;
- di->display_soc = 0;
-}
+ u32 *ocv_table, temp;
+ int ocv_size, cap;
-static void ioffset_sample_time(struct battery_info *di, int time)
-{
- u8 ggcon;
+ ocv_table = di->pdata->zero_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ cap = ab_div_c(temp, di->fcc, MAX_INTERPOLATE);
- battery_read(di->rk818, GGCON, &ggcon, 1);
- ggcon &= ~(0x30); /*clear <5:4>*/
- ggcon |= time;
- battery_write(di->rk818, GGCON, &ggcon, 1);
- debug_reg(di, GGCON, "GGCON");
+ return cap;
}
-static void update_cal_offset(struct battery_info *di)
+static int rk818_bat_get_iadc(struct rk818_battery *di)
{
- int mod = di->queue_work_cnt % TIME_10MIN_SEC;
+ int val = 0;
- DBG("<%s>, queue_work_cnt = %lu, mod = %d\n", __func__, di->queue_work_cnt, mod);
- if ((!mod) && (di->pcb_ioffset_updated)) {
- _set_cal_offset(di, di->pcb_ioffset+_get_ioffset(di));
- DBG("<%s>. 10min update cal_offset = %d", __func__, di->pcb_ioffset+_get_ioffset(di));
- }
-}
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGH) << 8;
+ if (val > 2047)
+ val -= 4096;
+ return val;
+}
-static void zero_current_calibration(struct battery_info *di)
+static bool rk818_bat_adc_calib(struct rk818_battery *di)
{
- int adc_value;
- uint16_t C0;
- uint16_t C1;
- int ioffset;
- int pcb_offset;
- u8 retry = 0;
+ int i, ioffset, coffset, adc, save_coffset;
- if ((di->charge_status == CHARGE_FINISH) && (abs32_int(di->current_avg) > 4)) {
-
- for (retry = 0; retry < 5; retry++) {
- adc_value = _get_raw_adc_current(di);
- DBG("<%s>. adc_value = %d\n", __func__, adc_value);
+ if ((di->chrg_status != CHARGE_FINISH) ||
+ (base2min(di->boot_base) < ADC_CALIB_LMT_MIN) ||
+ (abs(di->current_avg) < ADC_CALIB_THRESHOLD))
+ return false;
- C0 = _get_cal_offset(di);
- C1 = adc_value + C0;
- _set_cal_offset(di, C1);
- DBG("<%s>. C1 = %d\n", __func__, C1);
+ save_coffset = rk818_bat_get_coffset(di);
+ for (i = 0; i < 5; i++) {
+ adc = rk818_bat_get_iadc(di);
+ if (!rk818_bat_chrg_online(di)) {
+ rk818_bat_set_coffset(di, save_coffset);
+ BAT_INFO("quit, charger plugout when calib adc\n");
+ return false;
+ }
+ coffset = rk818_bat_get_coffset(di);
+ rk818_bat_set_coffset(di, coffset + adc);
+ msleep(2000);
+ adc = rk818_bat_get_iadc(di);
+ if (abs(adc) < ADC_CALIB_THRESHOLD) {
+ coffset = rk818_bat_get_coffset(di);
+ ioffset = rk818_bat_get_ioffset(di);
+ di->poffset = coffset - ioffset;
+ rk818_bat_write(di, RK818_POFFSET_REG, di->poffset);
+ BAT_INFO("new offset:c=0x%x, i=0x%x, p=0x%x\n",
+ coffset, ioffset, di->poffset);
+ return true;
+ } else {
+ BAT_INFO("coffset calib again %d..\n", i);
+ rk818_bat_set_coffset(di, coffset);
msleep(2000);
-
- adc_value = _get_raw_adc_current(di);
- DBG("<%s>. adc_value = %d\n", __func__, adc_value);
- if (adc_value < 4) {
-
- ioffset = _get_ioffset(di);
- pcb_offset = C1 - ioffset;
- di->pcb_ioffset = pcb_offset;
- di->pcb_ioffset_updated = true;
- DBG("<%s>. update the cal_offset, pcb_offset = %d\n", __func__, pcb_offset);
- break;
- } else
- di->pcb_ioffset_updated = false;
}
}
-}
-
-static bool _is_relax_mode(struct battery_info *di)
-{
- int ret;
- u8 status;
-
- ret = battery_read(di->rk818, GGSTS, &status, 1);
-
- if ((!(status&RELAX_VOL1_UPD)) || (!(status&RELAX_VOL2_UPD)))
- return false;
- else
- return true;
+ return false;
}
-static uint16_t get_relax_voltage(struct battery_info *di)
+static void rk818_bat_set_ioffset_sample(struct rk818_battery *di)
{
- int ret;
- u8 status;
- uint16_t relax_vol1, relax_vol2;
u8 ggcon;
- ret = battery_read(di->rk818, GGSTS, &status, 1);
- ret = battery_read(di->rk818, GGCON, &ggcon, 1);
-
- relax_vol1 = _get_relax_vol1(di);
- relax_vol2 = _get_relax_vol2(di);
- DBG("<%s>. GGSTS = 0x%x, GGCON = 0x%x, relax_vol1 = %d, relax_vol2 = %d\n", __func__, status, ggcon, relax_vol1, relax_vol2);
- if (_is_relax_mode(di))
- return relax_vol1 > relax_vol2?relax_vol1:relax_vol2;
- else
- return 0;
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ ggcon &= ~ADC_CAL_MIN_MSK;
+ ggcon |= ADC_CAL_8MIN;
+ rk818_bat_write(di, RK818_GGCON_REG, ggcon);
}
-static void _set_relax_thres(struct battery_info *di)
+static void rk818_bat_set_ocv_sample(struct rk818_battery *di)
{
- u8 buf;
- int enter_thres, exit_thres;
- struct cell_state *cell = &di->cell;
-
- enter_thres = (cell->config->ocv->sleep_enter_current)*1000/1506;
- exit_thres = (cell->config->ocv->sleep_exit_current)*1000/1506;
-
- buf = enter_thres&0xff;
- battery_write(di->rk818, RELAX_ENTRY_THRES_REGL, &buf, 1);
- buf = (enter_thres>>8)&0xff;
- battery_write(di->rk818, RELAX_ENTRY_THRES_REGH, &buf, 1);
-
- buf = exit_thres&0xff;
- battery_write(di->rk818, RELAX_EXIT_THRES_REGL, &buf, 1);
- buf = (exit_thres>>8)&0xff;
- battery_write(di->rk818, RELAX_EXIT_THRES_REGH, &buf, 1);
+ u8 ggcon;
- /* set sample time */
- battery_read(di->rk818, GGCON, &buf, 1);
- buf &= ~(3<<2);/*8min*/
- buf &= ~0x01; /* clear bat_res calc*/
- battery_write(di->rk818, GGCON, &buf, 1);
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ ggcon &= ~OCV_SAMP_MIN_MSK;
+ ggcon |= OCV_SAMP_8MIN;
+ rk818_bat_write(di, RK818_GGCON_REG, ggcon);
}
-static void restart_relax(struct battery_info *di)
+static void rk818_bat_restart_relax(struct rk818_battery *di)
{
- u8 ggcon;/* chrg_ctrl_reg2;*/
u8 ggsts;
- battery_read(di->rk818, GGCON, &ggcon, 1);
- ggcon &= ~0x0c;
- battery_write(di->rk818, GGCON, &ggcon, 1);
-
- battery_read(di->rk818, GGSTS, &ggsts, 1);
- ggsts &= ~0x0c;
- battery_write(di->rk818, GGSTS, &ggsts, 1);
+ ggsts = rk818_bat_read(di, RK818_GGSTS_REG);
+ ggsts &= ~RELAX_VOL12_UPD_MSK;
+ rk818_bat_write(di, RK818_GGSTS_REG, ggsts);
}
-static int _get_average_current(struct battery_info *di)
+static void rk818_bat_set_relax_sample(struct rk818_battery *di)
{
- u8 buf;
- int ret;
- int current_now;
- int temp;
-
- ret = battery_read(di->rk818, BAT_CUR_AVG_REGL, &buf, 1);
- if (ret < 0) {
- dev_err(di->dev, "error read BAT_CUR_AVG_REGL");
- return ret;
- }
- current_now = buf;
- ret = battery_read(di->rk818, BAT_CUR_AVG_REGH, &buf, 1);
- if (ret < 0) {
- dev_err(di->dev, "error read BAT_CUR_AVG_REGH");
- return ret;
- }
- current_now |= (buf<<8);
+ u8 buf;
+ int enter_thres, exit_thres;
+ struct battery_platform_data *pdata = di->pdata;
- if (current_now & 0x800)
- current_now -= 4096;
+ enter_thres = pdata->sleep_enter_current * 1000 / 1506 / di->res_div;
+ exit_thres = pdata->sleep_exit_current * 1000 / 1506 / di->res_div;
- temp = current_now*1506/1000;/*1000*90/14/4096*500/521;*/
+ /* set relax enter and exit threshold */
+ buf = enter_thres & 0xff;
+ rk818_bat_write(di, RK818_RELAX_ENTRY_THRES_REGL, buf);
+ buf = (enter_thres >> 8) & 0xff;
+ rk818_bat_write(di, RK818_RELAX_ENTRY_THRES_REGH, buf);
- return temp;
+ buf = exit_thres & 0xff;
+ rk818_bat_write(di, RK818_RELAX_EXIT_THRES_REGL, buf);
+ buf = (exit_thres >> 8) & 0xff;
+ rk818_bat_write(di, RK818_RELAX_EXIT_THRES_REGH, buf);
+ /* reset relax update state */
+ rk818_bat_restart_relax(di);
+ DBG("<%s>. sleep_enter_current = %d, sleep_exit_current = %d\n",
+ __func__, pdata->sleep_enter_current, pdata->sleep_exit_current);
}
-static bool is_bat_exist(struct battery_info *di)
+static bool is_rk818_bat_exist(struct rk818_battery *di)
{
- u8 buf;
-
- battery_read(di->rk818, SUP_STS_REG, &buf, 1);
- return (buf & 0x80) ? true : false;
+ return (rk818_bat_read(di, RK818_SUP_STS_REG) & BAT_EXS) ? true : false;
}
-static bool _is_first_poweron(struct battery_info *di)
+static bool is_rk818_bat_first_pwron(struct rk818_battery *di)
{
u8 buf;
- u8 temp;
-
- battery_read(di->rk818, GGSTS, &buf, 1);
- DBG("%s GGSTS value is 0x%2x \n", __func__, buf);
- /*di->pwron_bat_con = buf;*/
- if (buf&BAT_CON) {
- buf &= ~(BAT_CON);
- do {
- battery_write(di->rk818, GGSTS, &buf, 1);
- battery_read(di->rk818, GGSTS, &temp, 1);
- } while (temp&BAT_CON);
+
+ buf = rk818_bat_read(di, RK818_GGSTS_REG);
+ if (buf & BAT_CON) {
+ buf &= ~BAT_CON;
+ rk818_bat_write(di, RK818_GGSTS_REG, buf);
return true;
}
+
return false;
}
-static void flatzone_voltage_init(struct battery_info *di)
-{
- u32 *ocv_table;
- int ocv_size;
- int temp_table[21];
- int i, j;
-
- ocv_table = di->platform_data->battery_ocv;
- ocv_size = di->platform_data->ocv_size;
- for (j = 0; j < 21; j++)
- temp_table[j] = 0;
+static u8 rk818_bat_get_pwroff_min(struct rk818_battery *di)
+{
+ u8 cur, last;
- j = 0;
- for (i = 1; i < ocv_size-1; i++) {
- if (ocv_table[i+1] < ocv_table[i] + 20)
- temp_table[j++] = i;
- }
+ cur = rk818_bat_read(di, RK818_NON_ACT_TIMER_CNT_REG);
+ last = rk818_bat_read(di, RK818_NON_ACT_TIMER_CNT_SAVE_REG);
+ rk818_bat_write(di, RK818_NON_ACT_TIMER_CNT_SAVE_REG, cur);
- temp_table[j] = temp_table[j-1]+1;
- i = temp_table[0];
- di->enter_flatzone = ocv_table[i];
- j = 0;
+ return (cur != last) ? cur : 0;
+}
+static u8 is_rk818_bat_initialized(struct rk818_battery *di)
+{
+ u8 val = rk818_bat_read(di, RK818_MISC_MARK_REG);
- for (i = 0; i <= 20; i++) {
- if (temp_table[i] < temp_table[i+1])
- j = i+1;
+ if (val & FG_INIT) {
+ val &= ~FG_INIT;
+ rk818_bat_write(di, RK818_MISC_MARK_REG, val);
+ return true;
+ } else {
+ return false;
}
-
- i = temp_table[j];
- di->exit_flatzone = ocv_table[i];
-
- DBG("enter_flatzone = %d exit_flatzone = %d\n", di->enter_flatzone, di->exit_flatzone);
-
}
-#if 0
-static int is_not_flatzone(struct battery_info *di, int voltage)
+static bool is_rk818_bat_ocv_valid(struct rk818_battery *di)
{
- if ((voltage >= di->enter_flatzone) && (voltage <= di->exit_flatzone)) {
- DBG("<%s>. is in flat zone\n", __func__);
- return 0;
- } else {
- DBG("<%s>. is not in flat zone\n", __func__);
- return 1;
- }
+ return (!di->is_initialized && di->pwroff_min >= 30) ? true : false;
}
-#endif
-static void power_on_save(struct battery_info *di, int voltage)
+
+static void rk818_bat_init_age_algorithm(struct rk818_battery *di)
{
- u8 buf;
- u8 save_soc;
-
- battery_read(di->rk818, NON_ACT_TIMER_CNT_REG, &buf, 1);
-
- if (_is_first_poweron(di) || buf > 30) { /* first power-on or power off time > 30min */
- _voltage_to_capacity(di, voltage);
- if (di->temp_soc < 20) {
- di->dod0_voltage = voltage;
- di->dod0_capacity = di->nac;
- di->dod0_status = 1;
- di->dod0 = di->temp_soc;/* _voltage_to_capacity(di, voltage); */
- di->dod0_level = 80;
-
- if (di->temp_soc <= 0)
- di->dod0_level = 100;
- else if (di->temp_soc < 5)
- di->dod0_level = 95;
- else if (di->temp_soc < 10)
- di->dod0_level = 90;
- /* save_soc = di->dod0_level; */
- save_soc = get_level(di);
- if (save_soc < di->dod0_level)
- save_soc = di->dod0_level;
- save_level(di, save_soc);
- DBG("<%s>UPDATE-FCC POWER ON : dod0_voltage = %d, dod0_capacity = %d ", __func__, di->dod0_voltage, di->dod0_capacity);
- }
- }
+ int age_level, ocv_soc, ocv_cap, ocv_vol;
-}
+ if (di->is_first_power_on || is_rk818_bat_ocv_valid(di)) {
+ DBG("<%s> enter.\n", __func__);
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ if (ocv_soc < 20) {
+ di->age_voltage = ocv_vol;
+ di->age_ocv_cap = ocv_cap;
+ di->age_ocv_soc = ocv_soc;
+ di->age_adjust_cap = 0;
+ if (ocv_soc <= 0)
+ di->age_level = 100;
+ else if (ocv_soc < 5)
+ di->age_level = 95;
+ else if (ocv_soc < 10)
+ di->age_level = 90;
+ else
+ di->age_level = 80;
+
+ age_level = rk818_bat_get_age_level(di);
+ if (age_level > di->age_level) {
+ di->age_allow_update = false;
+ age_level -= 5;
+ if (age_level <= 80)
+ age_level = 80;
+ rk818_bat_save_age_level(di, age_level);
+ } else {
+ di->age_allow_update = true;
+ di->age_keep_sec = get_boot_sec();
+ }
-static int _get_soc(struct battery_info *di)
-{
- return di->remain_capacity * 100 / di->fcc;
+ BAT_INFO("init_age_algorithm: "
+ "age_vol:%d, age_ocv_cap:%d, "
+ "age_ocv_soc:%d, old_age_level:%d, "
+ "age_allow_update:%d, new_age_level:%d\n",
+ di->age_voltage, di->age_ocv_cap,
+ ocv_soc, age_level, di->age_allow_update,
+ di->age_level);
+ }
+ }
}
-static enum power_supply_property rk_battery_props[] = {
-
- POWER_SUPPLY_PROP_STATUS,
+static enum power_supply_property rk818_bat_props[] = {
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
};
-#define to_device_info(x) container_of((x), \
- struct battery_info, bat)
-
-static int rk_battery_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
+static int rk818_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
{
- u8 buf;
- struct battery_info *di = to_device_info(psy);
+ struct rk818_battery *di = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = di->current_avg*1000;/*uA*/
+ val->intval = di->current_avg * 1000;/*uA*/
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_CURRENT * 1000;
break;
-
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = di->voltage*1000;/*uV*/
+ val->intval = di->voltage_avg * 1000;/*uV*/
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_VOLTAGE * 1000;
break;
-
case POWER_SUPPLY_PROP_PRESENT:
- /*val->intval = val->intval <= 0 ? 0 : 1;*/
- battery_read(di->rk818, SUP_STS_REG, &buf, 1);
- val->intval = (buf >> 7); /*bit7:BAT_EX*/
+ val->intval = is_rk818_bat_exist(di);
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_PRESET;
break;
-
-
case POWER_SUPPLY_PROP_CAPACITY:
- val->intval = di->real_soc;
+ val->intval = di->dsoc;
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_SOC;
+ DBG("<%s>. report dsoc: %d\n", __func__, val->intval);
break;
-
case POWER_SUPPLY_PROP_HEALTH:
val->intval = POWER_SUPPLY_HEALTH_GOOD;
break;
-
- case POWER_SUPPLY_PROP_STATUS:
- val->intval = di->status;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = di->temperature;
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_TEMPERATURE;
break;
-
default:
return -EINVAL;
}
return 0;
}
-
-static enum power_supply_property rk_battery_ac_props[] = {
- POWER_SUPPLY_PROP_ONLINE,
+static const struct power_supply_desc rk818_bat_desc = {
+ .name = "battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = rk818_bat_props,
+ .num_properties = ARRAY_SIZE(rk818_bat_props),
+ .get_property = rk818_battery_get_property,
};
-static enum power_supply_property rk_battery_usb_props[] = {
- POWER_SUPPLY_PROP_ONLINE,
-};
-
-#define to_ac_device_info(x) container_of((x), \
- struct battery_info, ac)
-
-static int rk_battery_ac_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
+static int rk818_bat_init_power_supply(struct rk818_battery *di)
{
- int ret = 0;
- struct battery_info *di = to_ac_device_info(psy);
+ struct power_supply_config psy_cfg = { .drv_data = di, };
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = di->ac_online; /*discharging*/
- break;
+ di->bat = devm_power_supply_register(di->dev, &rk818_bat_desc, &psy_cfg);
+ if (IS_ERR(di->bat)) {
+ dev_err(di->dev, "register bat power supply fail\n");
+ return PTR_ERR(di->bat);
+ }
- default:
- ret = -EINVAL;
- break;
- }
- return ret;
+ return 0;
}
-#define to_usb_device_info(x) container_of((x), \
- struct battery_info, usb)
-
-static int rk_battery_usb_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
+static void rk818_bat_save_cap(struct rk818_battery *di, int cap)
{
- int ret = 0;
- struct battery_info *di = to_usb_device_info(psy);
-
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- if ((strstr(saved_command_line, "charger") == NULL) && (di->real_soc == 0) && (di->work_on == 1))
- val->intval = 0;
- else
- val->intval = di->usb_online;
- break;
+ u8 buf;
+ static u32 old_cap;
- default:
- ret = -EINVAL;
- break;
- }
+ if (cap >= di->qmax)
+ cap = di->qmax;
+ if (cap <= 0)
+ cap = 0;
+ if (old_cap == cap)
+ return;
- return ret;
+ old_cap = cap;
+ buf = (cap >> 24) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG3, buf);
+ buf = (cap >> 16) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG2, buf);
+ buf = (cap >> 8) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG1, buf);
+ buf = (cap >> 0) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG0, buf);
}
-
-static void battery_power_supply_init(struct battery_info *di)
+static int rk818_bat_get_prev_cap(struct rk818_battery *di)
{
- di->bat.name = "BATTERY";
- di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- di->bat.properties = rk_battery_props;
- di->bat.num_properties = ARRAY_SIZE(rk_battery_props);
- di->bat.get_property = rk_battery_get_property;
+ int val = 0;
- di->ac.name = "AC";
- di->ac.type = POWER_SUPPLY_TYPE_MAINS;
- di->ac.properties = rk_battery_ac_props;
- di->ac.num_properties = ARRAY_SIZE(rk_battery_ac_props);
- di->ac.get_property = rk_battery_ac_get_property;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG3) << 24;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG2) << 16;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG1) << 8;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG0) << 0;
- di->usb.name = "USB";
- di->usb.type = POWER_SUPPLY_TYPE_USB;
- di->usb.properties = rk_battery_usb_props;
- di->usb.num_properties = ARRAY_SIZE(rk_battery_usb_props);
- di->usb.get_property = rk_battery_usb_get_property;
+ return val;
}
-static int battery_power_supply_register(struct battery_info *di, struct device *dev)
+static void rk818_bat_save_fcc(struct rk818_battery *di, u32 fcc)
{
- int ret;
-
- ret = power_supply_register(dev, &di->bat);
- if (ret) {
- dev_err(dev, "failed to register main battery\n");
- goto batt_failed;
- }
- ret = power_supply_register(dev, &di->usb);
- if (ret) {
- dev_err(dev, "failed to register usb power supply\n");
- goto usb_failed;
- }
- ret = power_supply_register(dev, &di->ac);
- if (ret) {
- dev_err(dev, "failed to register ac power supply\n");
- goto ac_failed;
- }
-
- return 0;
+ u8 buf;
-ac_failed:
- power_supply_unregister(&di->ac);
-usb_failed:
- power_supply_unregister(&di->usb);
-batt_failed:
- power_supply_unregister(&di->bat);
+ buf = (fcc >> 24) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG3, buf);
+ buf = (fcc >> 16) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG2, buf);
+ buf = (fcc >> 8) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG1, buf);
+ buf = (fcc >> 0) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG0, buf);
- return ret;
+ BAT_INFO("save fcc: %d\n", fcc);
}
-static void _capacity_init(struct battery_info *di, u32 capacity)
+static int rk818_bat_get_fcc(struct rk818_battery *di)
{
- u8 buf;
- u32 capacity_ma;
+ u32 fcc = 0;
- reset_zero_var(di);
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG3) << 24;
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG2) << 16;
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG1) << 8;
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG0) << 0;
- capacity_ma = capacity*2390;/* 2134;//36*14/900*4096/521*500; */
- do {
- buf = (capacity_ma>>24)&0xff;
- battery_write(di->rk818, GASCNT_CAL_REG3, &buf, 1);
- buf = (capacity_ma>>16)&0xff;
- battery_write(di->rk818, GASCNT_CAL_REG2, &buf, 1);
- buf = (capacity_ma>>8)&0xff;
- battery_write(di->rk818, GASCNT_CAL_REG1, &buf, 1);
- buf = (capacity_ma&0xff) | 0x01;
- battery_write(di->rk818, GASCNT_CAL_REG0, &buf, 1);
- battery_read(di->rk818, GASCNT_CAL_REG0, &buf, 1);
+ if (fcc < MIN_FCC) {
+ BAT_INFO("invalid fcc(%d), use design cap", fcc);
+ fcc = di->pdata->design_capacity;
+ rk818_bat_save_fcc(di, fcc);
+ } else if (fcc > di->pdata->design_qmax) {
+ BAT_INFO("invalid fcc(%d), use qmax", fcc);
+ fcc = di->pdata->design_qmax;
+ rk818_bat_save_fcc(di, fcc);
+ }
- } while (buf == 0);
+ return fcc;
}
-
-static void _save_remain_capacity(struct battery_info *di, u32 capacity)
+static void rk818_bat_init_coulomb_cap(struct rk818_battery *di, u32 capacity)
{
u8 buf;
- u32 capacity_ma;
+ u32 cap;
- if (capacity >= di->qmax)
- capacity = di->qmax;
+ cap = capacity * 2390 / di->res_div;
+ buf = (cap >> 24) & 0xff;
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG3, buf);
+ buf = (cap >> 16) & 0xff;
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG2, buf);
+ buf = (cap >> 8) & 0xff;
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG1, buf);
+ buf = ((cap >> 0) & 0xff);
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG0, buf);
- capacity_ma = capacity;
-
- buf = (capacity_ma>>24)&0xff;
- battery_write(di->rk818, REMAIN_CAP_REG3, &buf, 1);
- buf = (capacity_ma>>16)&0xff;
- battery_write(di->rk818, REMAIN_CAP_REG2, &buf, 1);
- buf = (capacity_ma>>8)&0xff;
- battery_write(di->rk818, REMAIN_CAP_REG1, &buf, 1);
- buf = (capacity_ma&0xff) | 0x01;
- battery_write(di->rk818, REMAIN_CAP_REG0, &buf, 1);
+ DBG("<%s>. new coulomb cap = %d\n", __func__, capacity);
+ di->remain_cap = capacity;
+ di->rsoc = rk818_bat_get_rsoc(di);
}
-static int _get_remain_capacity(struct battery_info *di)
+static void rk818_bat_save_dsoc(struct rk818_battery *di, u8 save_soc)
{
- int ret;
- int temp = 0;
- u8 buf;
- u32 capacity;
-
- ret = battery_read(di->rk818, REMAIN_CAP_REG3, &buf, 1);
- temp = buf << 24;
- ret = battery_read(di->rk818, REMAIN_CAP_REG2, &buf, 1);
- temp |= buf << 16;
- ret = battery_read(di->rk818, REMAIN_CAP_REG1, &buf, 1);
- temp |= buf << 8;
- ret = battery_read(di->rk818, REMAIN_CAP_REG0, &buf, 1);
- temp |= buf;
+ static int last_soc = -1;
- capacity = temp;/* /4096*900/14/36*500/521; */
-
- return capacity;
+ if (last_soc != save_soc) {
+ rk818_bat_write(di, RK818_SOC_REG, save_soc);
+ last_soc = save_soc;
+ }
}
-
-static void _save_FCC_capacity(struct battery_info *di, u32 capacity)
+static int rk818_bat_get_prev_dsoc(struct rk818_battery *di)
{
- u8 buf;
- u32 capacity_ma;
-
- capacity_ma = capacity;
- buf = (capacity_ma>>24)&0xff;
- battery_write(di->rk818, NEW_FCC_REG3, &buf, 1);
- buf = (capacity_ma>>16)&0xff;
- battery_write(di->rk818, NEW_FCC_REG2, &buf, 1);
- buf = (capacity_ma>>8)&0xff;
- battery_write(di->rk818, NEW_FCC_REG1, &buf, 1);
- buf = (capacity_ma&0xff) | 0x01;
- battery_write(di->rk818, NEW_FCC_REG0, &buf, 1);
+ return rk818_bat_read(di, RK818_SOC_REG);
}
-static int _get_FCC_capacity(struct battery_info *di)
+static void rk818_bat_save_reboot_cnt(struct rk818_battery *di, u8 save_cnt)
{
- int ret;
- int temp = 0;
- u8 buf;
- u32 capacity;
-
- ret = battery_read(di->rk818, NEW_FCC_REG3, &buf, 1);
- temp = buf << 24;
- ret = battery_read(di->rk818, NEW_FCC_REG2, &buf, 1);
- temp |= buf << 16;
- ret = battery_read(di->rk818, NEW_FCC_REG1, &buf, 1);
- temp |= buf << 8;
- ret = battery_read(di->rk818, NEW_FCC_REG0, &buf, 1);
- temp |= buf;
-
- if (temp > 1)
- capacity = temp-1;/* 4096*900/14/36*500/521 */
- else
- capacity = temp;
- DBG("%s NEW_FCC_REG %d capacity = %d\n", __func__, temp, capacity);
-
- return capacity;
+ rk818_bat_write(di, RK818_REBOOT_CNT_REG, save_cnt);
}
-static int _get_realtime_capacity(struct battery_info *di)
+static int rk818_bat_fb_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
{
- int ret;
- int temp = 0;
- u8 buf;
- u32 capacity;
-
- ret = battery_read(di->rk818, GASCNT3, &buf, 1);
- temp = buf << 24;
- ret = battery_read(di->rk818, GASCNT2, &buf, 1);
- temp |= buf << 16;
- ret = battery_read(di->rk818, GASCNT1, &buf, 1);
- temp |= buf << 8;
- ret = battery_read(di->rk818, GASCNT0, &buf, 1);
- temp |= buf;
+ struct rk818_battery *di;
+ struct fb_event *evdata = data;
- capacity = temp/2390;/* 4096*900/14/36*500/521; */
+ di = container_of(nb, struct rk818_battery, fb_nb);
+ di->fb_blank = *(int *)evdata->data;
- return capacity;
+ return 0;
}
-static void relax_volt_update_remain_capacity(struct battery_info *di, uint16_t relax_voltage, int sleep_min)
+static int rk818_bat_register_fb_notify(struct rk818_battery *di)
{
- int remain_capacity;
- int relax_capacity;
- int now_temp_soc;
- int relax_soc;
- int abs_soc;
- int min, soc_time;
- int now_current;
-
- now_temp_soc = _get_soc(di);
- _voltage_to_capacity(di, relax_voltage);
- relax_soc = di->temp_soc;
- relax_capacity = di->temp_nac;
- abs_soc = abs32_int(relax_soc - now_temp_soc);
-
- DBG("<%s>. suspend_temp_soc=%d, temp_soc=%d, ,real_soc = %d\n", __func__, di->suspend_temp_soc, now_temp_soc, di->real_soc);
- DBG("<%s>. relax_soc = %d, abs_soc = %d\n", __func__, relax_soc, abs_soc);
-
- /*handle temp_soc*/
- if (abs32_int(di->real_soc - relax_soc) <= 5) {
- remain_capacity = relax_capacity;
- DBG("<%s>. real-soc is close to relax-soc, set: temp_soc = relax_soc\n", __func__);
- } else {
- if (abs_soc == 0)
- remain_capacity = _get_realtime_capacity(di);
- else if (abs_soc <= 10)
- remain_capacity = relax_capacity;
- else if (abs_soc <= 20)
- remain_capacity = relax_capacity*70/100+di->remain_capacity*30/100;
- else
- remain_capacity = relax_capacity*50/100+di->remain_capacity*50/100;
- }
- _capacity_init(di, remain_capacity);
- di->temp_soc = _get_soc(di);
- di->remain_capacity = _get_realtime_capacity(di);
-
- /*handle real_soc*/
- DBG("<%s>. real_soc = %d, adjust delta = %d\n", __func__, di->real_soc, di->suspend_temp_soc - relax_soc);
- if (relax_soc < now_temp_soc) {
- if (di->suspend_temp_soc - relax_soc <= 5)
- di->real_soc = di->real_soc - (di->suspend_temp_soc - relax_soc);
- else if (di->suspend_temp_soc - relax_soc <= 10)
- di->real_soc = di->real_soc - 5;
- else
- di->real_soc = di->real_soc - (di->suspend_temp_soc - relax_soc)/2;
- } else {
- now_current = _get_average_current(di);
- soc_time = di->fcc*3600/100/(abs_int(now_current));/*1% time cost*/
- min = soc_time / 60;
- if (sleep_min > min)
- di->real_soc--;
- }
+ memset(&di->fb_nb, 0, sizeof(di->fb_nb));
+ di->fb_nb.notifier_call = rk818_bat_fb_notifier;
- DBG("<%s>. new_temp_soc=%d, new_real_soc=%d, new_remain_cap=%d\n", __func__, _get_soc(di), di->real_soc, di->remain_capacity);
+ return fb_register_client(&di->fb_nb);
}
-
-static int _copy_soc(struct battery_info *di, u8 save_soc)
+static int rk818_bat_unregister_fb_notify(struct rk818_battery *di)
{
- u8 soc;
-
- soc = save_soc;
- battery_write(di->rk818, SOC_REG, &soc, 1);
- return 0;
+ return fb_unregister_client(&di->fb_nb);
}
-static bool support_uboot_charge(void)
+static u8 rk818_bat_get_halt_cnt(struct rk818_battery *di)
{
- return support_uboot_chrg?true:false;
+ return rk818_bat_read(di, RK818_HALT_CNT_REG);
}
-static int _rsoc_init(struct battery_info *di)
+static void rk818_bat_inc_halt_cnt(struct rk818_battery *di)
{
- u8 pwron_soc;
- u8 init_soc;
- u32 remain_capacity;
- u8 last_shtd_time;
- u8 curr_shtd_time;
-#ifdef SUPPORT_USB_CHARGE
- int otg_status;
-#else
- u8 buf;
-#endif
- di->voltage = rk_battery_voltage(di);
- di->voltage_ocv = _get_OCV_voltage(di);
- DBG("OCV voltage = %d\n" , di->voltage_ocv);
+ u8 cnt;
- if (_is_first_poweron(di)) {
- _save_FCC_capacity(di, di->design_capacity);
- di->fcc = _get_FCC_capacity(di);
+ cnt = rk818_bat_read(di, RK818_HALT_CNT_REG);
+ rk818_bat_write(di, RK818_HALT_CNT_REG, ++cnt);
+}
- _voltage_to_capacity(di, di->voltage_ocv);
- di->real_soc = di->temp_soc;
- di->nac = di->temp_nac;
- DBG("<%s>.this is first poweron: OCV-SOC = %d, OCV-CAPACITY = %d, FCC = %d\n", __func__, di->real_soc, di->nac, di->fcc);
+static bool is_rk818_bat_last_halt(struct rk818_battery *di)
+{
+ int pre_cap = rk818_bat_get_prev_cap(di);
+ int now_cap = rk818_bat_get_coulomb_cap(di);
+ /* over 10%: system halt last time */
+ if (abs(now_cap - pre_cap) > (di->fcc / 10)) {
+ rk818_bat_inc_halt_cnt(di);
+ return true;
} else {
- battery_read(di->rk818, SOC_REG, &pwron_soc, 1);
- init_soc = pwron_soc;
- DBG("<%s>this is NOT first poweron.SOC_REG = %d\n", __func__, pwron_soc);
-
-#ifdef SUPPORT_USB_CHARGE
- otg_status = dwc_otg_check_dpdm();
- if ((pwron_soc == 0) && (otg_status == 1)) { /*usb charging*/
- init_soc = 1;
- battery_write(di->rk818, SOC_REG, &init_soc, 1);
- }
-#else
- battery_read(di->rk818, VB_MOD_REG, &buf, 1);
- if ((pwron_soc == 0) && ((buf&PLUG_IN_STS) != 0)) {
- init_soc = 1;
- battery_write(di->rk818, SOC_REG, &init_soc, 1);
- }
-#endif
- remain_capacity = _get_remain_capacity(di);
-
- battery_read(di->rk818, NON_ACT_TIMER_CNT_REG, &curr_shtd_time, 1);
- battery_read(di->rk818, NON_ACT_TIMER_CNT_REG_SAVE, &last_shtd_time, 1);
- battery_write(di->rk818, NON_ACT_TIMER_CNT_REG_SAVE, &curr_shtd_time, 1);
- DBG("<%s>, now_shtd_time = %d, last_shtd_time = %d, otg_status = %d\n", __func__, curr_shtd_time, last_shtd_time, otg_status);
-
- if (!support_uboot_charge()) {
- _voltage_to_capacity(di, di->voltage_ocv);
- DBG("<%s>Not first pwron, real_remain_cap = %d, ocv-remain_cp=%d\n", __func__, remain_capacity, di->temp_nac);
+ return false;
+ }
+}
- /* if plugin, make sure current shtd_time different from last_shtd_time.*/
- if (last_shtd_time != curr_shtd_time) {
+static void rk818_bat_first_pwron(struct rk818_battery *di)
+{
+ int ocv_vol;
+
+ rk818_bat_save_fcc(di, di->design_cap);
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ di->fcc = rk818_bat_get_fcc(di);
+ di->nac = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ di->rsoc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ di->dsoc = di->rsoc;
+
+ BAT_INFO("first on: dsoc=%d, rsoc=%d cap=%d, fcc=%d, ov=%d\n",
+ di->dsoc, di->rsoc, di->nac, di->fcc, ocv_vol);
+}
+
+static void rk818_bat_not_first_pwron(struct rk818_battery *di)
+{
+ int now_cap, pre_soc, pre_cap, ocv_cap, ocv_soc, ocv_vol;
+
+ di->fcc = rk818_bat_get_fcc(di);
+ pre_soc = rk818_bat_get_prev_dsoc(di);
+ pre_cap = rk818_bat_get_prev_cap(di);
+ now_cap = rk818_bat_get_coulomb_cap(di);
+ di->is_halt = is_rk818_bat_last_halt(di);
+ di->halt_cnt = rk818_bat_get_halt_cnt(di);
+ di->is_initialized = is_rk818_bat_initialized(di);
+ di->is_ocv_calib = is_rk818_bat_ocv_valid(di);
+
+ if (di->is_halt) {
+ BAT_INFO("system halt last time... cap: pre=%d, now=%d\n",
+ pre_cap, now_cap);
+ if (now_cap < 0)
+ now_cap = 0;
+ rk818_bat_init_coulomb_cap(di, now_cap);
+ pre_cap = now_cap;
+ pre_soc = di->rsoc;
+ goto finish;
+ } else if (di->is_initialized) {
+ BAT_INFO("initialized yet..\n");
+ goto finish;
+ } else if (di->is_ocv_calib) {
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ pre_cap = ocv_cap;
+ if (abs(ocv_soc - pre_soc) >= di->pdata->max_soc_offset) {
+ BAT_INFO("trigger max soc offset, dsoc: %d -> %d\n",
+ pre_soc, ocv_soc);
+ pre_soc = ocv_soc;
+ di->is_max_soc_offset = true;
+ }
+ BAT_INFO("OCV calib: cap=%d, rsoc=%d\n", ocv_cap, ocv_soc);
+ }
- if (curr_shtd_time > 30) {
- remain_capacity = di->temp_nac;
- DBG("<%s>shutdown_time > 30 minute, remain_cap = %d\n", __func__, remain_capacity);
+finish:
+ di->dsoc = pre_soc;
+ di->nac = pre_cap;
+ if (di->nac < 0)
+ di->nac = 0;
- } else if ((curr_shtd_time > 5) && (abs32_int(di->temp_soc - init_soc) >= 10)) {
- if (remain_capacity >= di->temp_nac*120/100)
- remain_capacity = di->temp_nac*110/100;
- else if (remain_capacity < di->temp_nac*8/10)
- remain_capacity = di->temp_nac*9/10;
+ BAT_INFO("dsoc=%d cap=%d v=%d ov=%d rv=%d min=%d psoc=%d pcap=%d\n",
+ di->dsoc, di->nac, rk818_bat_get_avg_voltage(di),
+ rk818_bat_get_ocv_voltage(di), rk818_bat_get_relax_voltage(di),
+ di->pwroff_min, rk818_bat_get_prev_dsoc(di),
+ rk818_bat_get_prev_cap(di));
+}
- DBG("<%s> shutdown_time > 3 minute, remain_cap = %d\n", __func__, remain_capacity);
- }
- }
- }
+static bool rk818_bat_ocv_sw_reset(struct rk818_battery *di)
+{
+ u8 buf;
- di->real_soc = init_soc;
- di->nac = remain_capacity;
- if (di->nac <= 0)
- di->nac = 0;
- DBG("<%s> init_soc = %d, init_capacity=%d\n", __func__, di->real_soc, di->nac);
+ buf = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ if (((buf & FG_RESET_LATE) && di->pwroff_min >= 30) ||
+ (buf & FG_RESET_NOW)) {
+ buf &= ~FG_RESET_LATE;
+ buf &= ~FG_RESET_NOW;
+ rk818_bat_write(di, RK818_MISC_MARK_REG, buf);
+ BAT_INFO("manual reset fuel gauge\n");
+ return true;
+ } else {
+ return false;
}
- return 0;
}
+static void rk818_bat_init_rsoc(struct rk818_battery *di)
+{
+ di->is_first_power_on = is_rk818_bat_first_pwron(di);
+ di->is_sw_reset = rk818_bat_ocv_sw_reset(di);
+ di->pwroff_min = rk818_bat_get_pwroff_min(di);
+
+ if (di->is_first_power_on || di->is_sw_reset)
+ rk818_bat_first_pwron(di);
+ else
+ rk818_bat_not_first_pwron(di);
+}
-static u8 get_charge_status(struct battery_info *di)
+static u8 rk818_bat_get_chrg_status(struct rk818_battery *di)
{
u8 status;
- u8 ret = 0;
- battery_read(di->rk818, SUP_STS_REG, &status, 1);
- status &= (0x70);
+ status = rk818_bat_read(di, RK818_SUP_STS_REG) & CHRG_STATUS_MSK;
switch (status) {
case CHARGE_OFF:
- ret = CHARGE_OFF;
- DBG(" CHARGE-OFF ...\n");
+ DBG("CHARGE-OFF ...\n");
break;
-
case DEAD_CHARGE:
- ret = DEAD_CHARGE;
- DBG(" DEAD CHARGE ...\n");
+ BAT_INFO("DEAD CHARGE...\n");
break;
-
- case TRICKLE_CHARGE: /* (0x02 << 4) */
- ret = DEAD_CHARGE;
- DBG(" TRICKLE CHARGE ...\n ");
+ case TRICKLE_CHARGE:
+ BAT_INFO("TRICKLE CHARGE...\n ");
break;
-
- case CC_OR_CV: /* (0x03 << 4) */
- ret = CC_OR_CV;
- DBG(" CC or CV ...\n");
+ case CC_OR_CV:
+ DBG("CC or CV...\n");
break;
-
- case CHARGE_FINISH: /* (0x04 << 4) */
- ret = CHARGE_FINISH;
- DBG(" CHARGE FINISH ...\n");
+ case CHARGE_FINISH:
+ DBG("CHARGE FINISH...\n");
break;
-
- case USB_OVER_VOL: /* (0x05 << 4) */
- ret = USB_OVER_VOL;
- DBG(" USB OVER VOL ...\n");
+ case USB_OVER_VOL:
+ BAT_INFO("USB OVER VOL...\n");
break;
-
- case BAT_TMP_ERR: /* (0x06 << 4) */
- ret = BAT_TMP_ERR;
- DBG(" BAT TMP ERROR ...\n");
+ case BAT_TMP_ERR:
+ BAT_INFO("BAT TMP ERROR...\n");
break;
-
- case TIMER_ERR: /* (0x07 << 4) */
- ret = TIMER_ERR;
- DBG(" TIMER ERROR ...\n");
+ case TIMER_ERR:
+ BAT_INFO("TIMER ERROR...\n");
break;
-
- case USB_EXIST: /* (1 << 1)// usb is exists */
- ret = USB_EXIST;
- DBG(" USB EXIST ...\n");
+ case USB_EXIST:
+ BAT_INFO("USB EXIST...\n");
break;
-
- case USB_EFF: /* (1 << 0)// usb is effective */
- ret = USB_EFF;
- DBG(" USB EFF...\n");
+ case USB_EFF:
+ BAT_INFO("USB EFF...\n");
break;
-
default:
return -EINVAL;
}
- return ret;
-
-}
-static void set_charge_current(struct battery_info *di, int charge_current)
-{
- u8 usb_ctrl_reg;
-
- battery_read(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- usb_ctrl_reg &= (~0x0f);/* (VLIM_4400MV | ILIM_1200MA) |(0x01 << 7); */
- usb_ctrl_reg |= (charge_current);
- battery_write(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
+ return status;
}
-static void fg_match_param(struct battery_info *di, int chg_vol, int chg_ilim, int chg_cur)
+static u8 rk818_bat_parse_fb_temperature(struct rk818_battery *di)
{
- int i;
+ u8 reg;
+ int index, fb_temp;
- di->chg_v_lmt = CHRG_VOL4200;
- di->chg_i_lmt = ILIM_1750MA;
- di->chg_i_cur = CHRG_CUR1400mA;
-
- for (i=0; i<ARRAY_SIZE(CHG_V_LMT); i++){
- if (chg_vol < CHG_V_LMT[i])
+ reg = DEFAULT_FB_TEMP;
+ fb_temp = di->pdata->fb_temp;
+ for (index = 0; index < ARRAY_SIZE(feedback_temp_array); index++) {
+ if (fb_temp < feedback_temp_array[index])
break;
- else
- di->chg_v_lmt = (i << CHG_VOL_SHIFT);
+ reg = (index << FB_TEMP_SHIFT);
}
- for (i=0; i<ARRAY_SIZE(CHG_I_LMT); i++){
- if (chg_ilim < CHG_I_LMT[i])
- break;
- else
- di->chg_i_lmt = (i << CHG_ILIM_SHIFT);
- }
+ return reg;
+}
- for (i=0; i<ARRAY_SIZE(CHG_I_CUR); i++){
- if (chg_cur < CHG_I_CUR[i])
- break;
- else
- di->chg_i_cur = (i << CHG_ICUR_SHIFT);
- }
- DBG("vol = 0x%x, i_lim = 0x%x, cur=0x%x\n",
- di->chg_v_lmt, di->chg_i_lmt, di->chg_i_cur);
+static u8 rk818_bat_parse_finish_ma(struct rk818_battery *di, int fcc)
+{
+ u8 ma;
+
+ if (di->pdata->sample_res == SAMPLE_RES_10MR)
+ ma = FINISH_100MA;
+ else if (fcc > 5000)
+ ma = FINISH_250MA;
+ else if (fcc >= 4000)
+ ma = FINISH_200MA;
+ else if (fcc >= 3000)
+ ma = FINISH_150MA;
+ else
+ ma = FINISH_100MA;
+
+ return ma;
}
-static void rk_battery_charger_init(struct battery_info *di)
+static void rk818_bat_init_chrg_config(struct rk818_battery *di)
{
- u8 chrg_ctrl_reg1, usb_ctrl_reg, chrg_ctrl_reg2, chrg_ctrl_reg3;
- u8 sup_sts_reg;
+ u8 usb_ctrl, chrg_ctrl2, chrg_ctrl3;
+ u8 thermal, ggcon, finish_ma, fb_temp;
- int chg_vol = di->rk818->battery_data->max_charger_voltagemV;
- int chg_cur = di->rk818->battery_data->max_charger_currentmA;
- int chg_ilim = di->rk818->battery_data->max_charger_ilimitmA;
- fg_match_param(di, chg_vol, chg_ilim, chg_cur);
- battery_read(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- battery_read(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- battery_read(di->rk818, CHRG_CTRL_REG2, &chrg_ctrl_reg2, 1);
- battery_read(di->rk818, SUP_STS_REG, &sup_sts_reg, 1);
- battery_read(di->rk818, CHRG_CTRL_REG3, &chrg_ctrl_reg3, 1);
+ finish_ma = rk818_bat_parse_finish_ma(di, di->fcc);
+ fb_temp = rk818_bat_parse_fb_temperature(di);
- DBG("old usb_ctrl_reg = 0x%2x, CHRG_CTRL_REG1 = 0x%2x\n ", usb_ctrl_reg, chrg_ctrl_reg1);
- usb_ctrl_reg &= (~0x0f);
-#ifdef SUPPORT_USB_CHARGE
- usb_ctrl_reg |= (ILIM_450MA);
-#else
- usb_ctrl_reg |= (di->chg_i_lmt);
-#endif
- chrg_ctrl_reg1 &= (0x00);
- chrg_ctrl_reg1 |= (CHRG_EN) | (di->chg_v_lmt | di->chg_i_cur);
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ thermal = rk818_bat_read(di, RK818_THERMAL_REG);
+ usb_ctrl = rk818_bat_read(di, RK818_USB_CTRL_REG);
+ chrg_ctrl2 = rk818_bat_read(di, RK818_CHRG_CTRL_REG2);
+ chrg_ctrl3 = rk818_bat_read(di, RK818_CHRG_CTRL_REG3);
- chrg_ctrl_reg3 |= CHRG_TERM_DIG_SIGNAL;/* digital finish mode*/
- chrg_ctrl_reg2 &= ~(0xc0);
- chrg_ctrl_reg2 |= FINISH_100MA;
+ /* set charge finish current */
+ chrg_ctrl3 |= CHRG_TERM_DIG_SIGNAL;
+ chrg_ctrl2 &= ~FINISH_CUR_MSK;
+ chrg_ctrl2 |= finish_ma;
- sup_sts_reg &= ~(0x01 << 3);
- sup_sts_reg |= (0x01 << 2);
+ /* disable cccv mode */
+ chrg_ctrl3 &= ~CHRG_TIMER_CCCV_EN;
- battery_write(di->rk818, CHRG_CTRL_REG3, &chrg_ctrl_reg3, 1);
- battery_write(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- battery_write(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- battery_write(di->rk818, CHRG_CTRL_REG2, &chrg_ctrl_reg2, 1);
- battery_write(di->rk818, SUP_STS_REG, &sup_sts_reg, 1);
+ /* set feed back temperature */
+ if (di->pdata->fb_temp)
+ usb_ctrl |= CHRG_CT_EN;
+ else
+ usb_ctrl &= ~CHRG_CT_EN;
+ thermal &= ~FB_TEMP_MSK;
+ thermal |= fb_temp;
- debug_reg(di, CHRG_CTRL_REG1, "CHRG_CTRL_REG1");
- debug_reg(di, SUP_STS_REG, "SUP_STS_REG");
- debug_reg(di, USB_CTRL_REG, "USB_CTRL_REG");
- debug_reg(di, CHRG_CTRL_REG1, "CHRG_CTRL_REG1");
+ /* adc current mode */
+ ggcon |= ADC_CUR_MODE;
- DBG("%s end\n", __func__);
+ rk818_bat_write(di, RK818_GGCON_REG, ggcon);
+ rk818_bat_write(di, RK818_THERMAL_REG, thermal);
+ rk818_bat_write(di, RK818_USB_CTRL_REG, usb_ctrl);
+ rk818_bat_write(di, RK818_CHRG_CTRL_REG2, chrg_ctrl2);
+ rk818_bat_write(di, RK818_CHRG_CTRL_REG3, chrg_ctrl3);
}
-void charge_disable_open_otg(int value)
+static void rk818_bat_init_coffset(struct rk818_battery *di)
{
- struct battery_info *di = g_battery;
+ int coffset, ioffset;
- if (value == 1) {
- DBG("charge disable, enable OTG.\n");
- rk818_set_bits(di->rk818, CHRG_CTRL_REG1, 1 << 7, 0 << 7);
- rk818_set_bits(di->rk818, 0x23, 1 << 7, 1 << 7); /* enable OTG */
- }
- if (value == 0) {
- DBG("charge enable, disable OTG.\n");
- rk818_set_bits(di->rk818, 0x23, 1 << 7, 0 << 7); /* disable OTG */
- rk818_set_bits(di->rk818, CHRG_CTRL_REG1, 1 << 7, 1 << 7);
- }
+ ioffset = rk818_bat_get_ioffset(di);
+ di->poffset = rk818_bat_read(di, RK818_POFFSET_REG);
+ if (!di->poffset)
+ di->poffset = DEFAULT_POFFSET;
+
+ coffset = di->poffset + ioffset;
+ if (coffset < INVALID_COFFSET_MIN || coffset > INVALID_COFFSET_MAX)
+ coffset = DEFAULT_COFFSET;
+
+ rk818_bat_set_coffset(di, coffset);
+
+ DBG("<%s>. offset: p=0x%x, i=0x%x, c=0x%x\n",
+ __func__, di->poffset, ioffset, rk818_bat_get_coffset(di));
+}
+
+static void rk818_bat_caltimer_isr(unsigned long data)
+{
+ struct rk818_battery *di = (struct rk818_battery *)data;
+
+ mod_timer(&di->caltimer, jiffies + MINUTE(8) * HZ);
+ queue_delayed_work(di->bat_monitor_wq, &di->calib_delay_work,
+ msecs_to_jiffies(10));
}
-static void low_waring_init(struct battery_info *di)
+static void rk818_bat_internal_calib(struct work_struct *work)
{
- u8 vb_mon_reg;
- u8 vb_mon_reg_init;
+ int ioffset, poffset;
+ struct rk818_battery *di = container_of(work,
+ struct rk818_battery, calib_delay_work.work);
+
+ /* calib coffset */
+ poffset = rk818_bat_read(di, RK818_POFFSET_REG);
+ if (poffset)
+ di->poffset = poffset;
+ else
+ di->poffset = DEFAULT_POFFSET;
- battery_read(di->rk818, VB_MOD_REG, &vb_mon_reg, 1);
+ ioffset = rk818_bat_get_ioffset(di);
+ rk818_bat_set_coffset(di, ioffset + di->poffset);
- /* 2.8v~3.5v, interrupt */
- vb_mon_reg_init = (((vb_mon_reg | (1 << 4)) & (~0x07)) | 0x06); /* 3400mV*/
- battery_write(di->rk818, VB_MOD_REG, &vb_mon_reg_init, 1);
+ /* calib voltage kb */
+ rk818_bat_init_voltage_kb(di);
+ BAT_INFO("caltimer: ioffset=0x%x, coffset=0x%x, poffset=%d\n",
+ ioffset, rk818_bat_get_coffset(di), di->poffset);
}
-static void fg_init(struct battery_info *di)
+static void rk818_bat_init_caltimer(struct rk818_battery *di)
{
- u8 adc_ctrl_val;
+ setup_timer(&di->caltimer, rk818_bat_caltimer_isr, (unsigned long)di);
+ di->caltimer.expires = jiffies + MINUTE(8) * HZ;
+ add_timer(&di->caltimer);
+ INIT_DELAYED_WORK(&di->calib_delay_work, rk818_bat_internal_calib);
+}
- adc_ctrl_val = 0x30;
- battery_write(di->rk818, ADC_CTRL_REG, &adc_ctrl_val, 1);
+static void rk818_bat_init_zero_table(struct rk818_battery *di)
+{
+ int i, diff, min, max;
+ size_t ocv_size, length;
- _gauge_enable(di);
- /* get the volatege offset */
- _get_voltage_offset_value(di);
- rk_battery_charger_init(di);
- _set_relax_thres(di);
- /* get the current offset , the value write to the CAL_OFFSET */
- di->current_offset = _get_ioffset(di);
- _set_cal_offset(di, di->current_offset+42);
- _rsoc_init(di);
- _capacity_init(di, di->nac);
+ ocv_size = di->pdata->ocv_size;
+ length = sizeof(di->pdata->zero_table) * ocv_size;
+ di->pdata->zero_table =
+ devm_kzalloc(di->dev, length, GFP_KERNEL);
+ if (!di->pdata->zero_table) {
+ di->pdata->zero_table = di->pdata->ocv_table;
+ dev_err(di->dev, "malloc zero table fail\n");
+ return;
+ }
- di->remain_capacity = _get_realtime_capacity(di);
- di->current_avg = _get_average_current(di);
+ min = di->pdata->pwroff_vol,
+ max = di->pdata->ocv_table[ocv_size - 4];
+ diff = (max - min) / (ocv_size - 1);
+ for (i = 0; i < ocv_size; i++)
+ di->pdata->zero_table[i] = min + (i * diff);
- low_waring_init(di);
- restart_relax(di);
- power_on_save(di, di->voltage_ocv);
- /* set sample time for cal_offset interval*/
- ioffset_sample_time(di, SAMP_TIME_8MIN);
- dump_gauge_register(di);
- dump_charger_register(di);
+ for (i = 0; i < ocv_size; i++)
+ DBG("zero[%d] = %d\n", i, di->pdata->zero_table[i]);
- DBG("<%s> :\n"
- "nac = %d , remain_capacity = %d\n"
- "OCV_voltage = %d, voltage = %d\n"
- "SOC = %d, fcc = %d\n, current=%d",
- __func__,
- di->nac, di->remain_capacity,
- di->voltage_ocv, di->voltage,
- di->real_soc, di->fcc, di->current_avg);
+ for (i = 0; i < ocv_size; i++)
+ DBG("ocv[%d] = %d\n", i, di->pdata->ocv_table[i]);
}
+static void rk818_bat_calc_sm_linek(struct rk818_battery *di)
+{
+ int linek, current_avg;
+ u8 diff, delta;
+
+ delta = abs(di->dsoc - di->rsoc);
+ diff = delta * 3;/* speed:3/4 */
+ current_avg = rk818_bat_get_avg_current(di);
+ if (current_avg >= 0) {
+ if (di->dsoc < di->rsoc)
+ linek = 1000 * (delta + diff) / diff;
+ else if (di->dsoc > di->rsoc)
+ linek = 1000 * diff / (delta + diff);
+ else
+ linek = 1000;
+ di->dbg_meet_soc = (di->dsoc >= di->rsoc) ?
+ (di->dsoc + diff) : (di->rsoc + diff);
+ } else {
+ if (di->dsoc < di->rsoc)
+ linek = -1000 * diff / (delta + diff);
+ else if (di->dsoc > di->rsoc)
+ linek = -1000 * (delta + diff) / diff;
+ else
+ linek = -1000;
+ di->dbg_meet_soc = (di->dsoc >= di->rsoc) ?
+ (di->dsoc - diff) : (di->rsoc - diff);
+ }
+
+ di->sm_linek = linek;
+ di->sm_remain_cap = di->remain_cap;
+ di->dbg_calc_dsoc = di->dsoc;
+ di->dbg_calc_rsoc = di->rsoc;
+
+ DBG("<%s>.diff=%d, k=%d, cur=%d\n", __func__, diff, linek, current_avg);
+}
-/* int R_soc, D_soc, r_soc, zq, k, Q_err, Q_ocv; */
-static void zero_get_soc(struct battery_info *di)
+static void rk818_bat_calc_zero_linek(struct rk818_battery *di)
{
int dead_voltage, ocv_voltage;
- int temp_soc = -1, real_soc;
- int currentold, currentnow, voltage;
- int i;
- int voltage_k;
- int count_num = 0;
- int q_ocv;
- int soc_time;
+ int voltage_avg, current_avg, vsys;
+ int ocv_cap, dead_cap, xsoc;
+ int ocv_soc, dead_soc;
+ int pwroff_vol;
+ int i, cnt, vol_old, vol_now;
+ int org_linek = 0, min_gap_xsoc;
+
+ if ((abs(di->current_avg) < 500) && (di->dsoc > 10))
+ pwroff_vol = di->pdata->pwroff_vol + 50;
+ else
+ pwroff_vol = di->pdata->pwroff_vol;
- DBG("\n\n+++++++zero mode++++++display soc+++++++++++\n");
do {
- currentold = _get_average_current(di);
- _get_cal_offset(di);
- _get_ioffset(di);
+ vol_old = rk818_bat_get_avg_voltage(di);
msleep(100);
- currentnow = _get_average_current(di);
- count_num++;
- } while ((currentold == currentnow) && (count_num < 11));
-
- voltage = 0;
- for (i = 0; i < 10 ; i++)
- voltage += rk_battery_voltage(di);
- voltage /= 10;
-
- if (di->voltage_old == 0)
- di->voltage_old = voltage;
- voltage_k = voltage;
- voltage = (di->voltage_old*2 + 8*voltage)/10;
- di->voltage_old = voltage;
- currentnow = _get_average_current(di);
-
- dead_voltage = 3400 + abs32_int(currentnow)*(di->bat_res+65)/1000;
- /* 65 mo power-path mos */
- ocv_voltage = voltage + abs32_int(currentnow)*di->bat_res/1000;
- DBG("ZERO: dead_voltage(shtd) = %d, ocv_voltage(now) = %d\n",
- dead_voltage, ocv_voltage);
-
- _voltage_to_capacity(di, dead_voltage);
- di->q_dead = di->temp_nac;
- DBG("ZERO: dead_voltage_soc = %d, q_dead = %d\n",
- di->temp_soc, di->q_dead);
-
- _voltage_to_capacity(di, ocv_voltage);
- q_ocv = di->temp_nac;
- DBG("ZERO: ocv_voltage_soc = %d, q_ocv = %d\n",
- di->temp_soc, q_ocv);
-
- /*[Q_err]: Qerr, [temp_nac]:check_voltage_nac*/
- di->q_err = di->remain_capacity - q_ocv;
- DBG("q_err=%d, [remain_capacity]%d - [q_ocv]%d",
- di->q_err, di->remain_capacity, q_ocv);
-
- if (di->display_soc == 0)
- di->display_soc = di->real_soc*1000;
- real_soc = di->display_soc;
-
- DBG("remain_capacity = %d, q_dead = %d, q_err = %d\n",
- di->remain_capacity, di->q_dead, di->q_err);
- /*[temp_nac]:dead_voltage*/
- if (q_ocv > di->q_dead) {
- DBG("first: q_ocv > di->q_dead\n");
-
- if (di->update_k == 0 || di->update_k >= 10) {
- if (di->update_k == 0) {
- DBG("[K == 0]\n");
- /* ZQ = Q_ded + Qerr */
- /*[temp_nac]:dead_voltage*/
- di->q_shtd = di->q_dead + di->q_err;
- temp_soc = (di->remain_capacity - di->q_shtd)*
- 1000/di->fcc;
- if (temp_soc == 0)
- di->update_k = 0;
- else
- di->line_k = (real_soc + temp_soc/2)
- /temp_soc;
+ vol_now = rk818_bat_get_avg_voltage(di);
+ cnt++;
+ } while ((vol_old == vol_now) && (cnt < 11));
+
+ voltage_avg = 0;
+ for (i = 0; i < 10; i++) {
+ voltage_avg += rk818_bat_get_avg_voltage(di);
+ msleep(100);
+ }
+
+ /* calc estimate ocv voltage */
+ voltage_avg /= 10;
+ current_avg = rk818_bat_get_avg_current(di);
+ vsys = voltage_avg + (current_avg * DEF_PWRPATH_RES) / 1000;
+
+ DBG("ZERO0: shtd_vol: org = %d, now = %d\n",
+ di->pdata->pwroff_vol, pwroff_vol);
+
+ dead_voltage = pwroff_vol - current_avg *
+ (di->bat_res + DEF_PWRPATH_RES) / 1000;
+ ocv_voltage = voltage_avg - (current_avg * di->bat_res) / 1000;
+ DBG("ZERO0: dead_voltage(shtd) = %d, ocv_voltage(now) = %d\n",
+ dead_voltage, ocv_voltage);
+
+ /* calc estimate soc and cap */
+ dead_soc = rk818_bat_vol_to_zerosoc(di, dead_voltage);
+ dead_cap = rk818_bat_vol_to_zerocap(di, dead_voltage);
+ DBG("ZERO0: dead_soc = %d, dead_cap = %d\n",
+ dead_soc, dead_cap);
+
+ ocv_soc = rk818_bat_vol_to_zerosoc(di, ocv_voltage);
+ ocv_cap = rk818_bat_vol_to_zerocap(di, ocv_voltage);
+ DBG("ZERO0: ocv_soc = %d, ocv_cap = %d\n",
+ ocv_soc, ocv_cap);
+
+ if (abs(current_avg) > ZERO_LOAD_LVL1)
+ min_gap_xsoc = ZERO_GAP_XSOC3;
+ else if (abs(current_avg) > ZERO_LOAD_LVL2)
+ min_gap_xsoc = ZERO_GAP_XSOC2;
+ else
+ min_gap_xsoc = ZERO_GAP_XSOC1;
+
+ /* xsoc: available rsoc */
+ xsoc = ocv_soc - dead_soc;
+ di->zero_remain_cap = di->remain_cap;
+ di->zero_timeout_cnt = 0;
+ if ((di->dsoc <= 1) && (xsoc > 0)) {
+ di->zero_linek = 400;
+ di->zero_drop_sec = 0;
+ } else if (xsoc >= 0) {
+ di->zero_drop_sec = 0;
+ di->zero_linek = (di->zero_dsoc + xsoc / 2) / DIV(xsoc);
+ org_linek = di->zero_linek;
+ /* battery energy mode to use up voltage */
+ if ((di->pdata->energy_mode) &&
+ (xsoc - di->dsoc >= ZERO_GAP_XSOC3) &&
+ (di->dsoc <= 10) && (di->zero_linek < 600)) {
+ di->zero_linek = 500;
+ DBG("ZERO-new: zero_linek adjust step0...\n");
+ /* reserve enough power yet, slow down any way */
+ } else if ((xsoc - di->dsoc >= min_gap_xsoc) ||
+ ((xsoc - di->dsoc >= ZERO_GAP_XSOC2) &&
+ (di->dsoc <= 10))) {
+ if (xsoc - di->dsoc >= 2 * min_gap_xsoc)
+ di->zero_linek = 400;
+ else if (xsoc - di->dsoc >= 2 + min_gap_xsoc)
+ di->zero_linek = 600;
+ else
+ di->zero_linek = 800;
+ DBG("ZERO-new: zero_linek adjust step1...\n");
+ /* control zero mode beginning enter */
+ } else if ((di->zero_linek > 1800) && (di->dsoc > 70)) {
+ di->zero_linek = 1800;
+ DBG("ZERO-new: zero_linek adjust step2...\n");
+ /* dsoc close to xsoc: it must reserve power */
+ } else if ((di->zero_linek > 1000) && (di->zero_linek < 1300)) {
+ di->zero_linek = 1300;
+ DBG("ZERO-new: zero_linek adjust step3...\n");
+ /* dsoc[5~15], dsoc < xsoc */
+ } else if ((di->dsoc <= 15 && di->dsoc > 5) &&
+ (di->zero_linek <= 1300)) {
+ /* slow down */
+ if (xsoc - di->dsoc >= min_gap_xsoc)
+ di->zero_linek = 800;
+ /* reserve power */
+ else
+ di->zero_linek = 1300;
+ DBG("ZERO-new: zero_linek adjust step4...\n");
+ /* dsoc[5, 100], dsoc < xsoc */
+ } else if ((di->zero_linek < 1000) && (di->dsoc >= 5)) {
+ if ((xsoc - di->dsoc) < min_gap_xsoc) {
+ /* reserve power */
+ di->zero_linek = 1300;
} else {
- DBG("[K >= 10].\n");
- temp_soc = ((di->remain_capacity - di->q_shtd)*
- 1000 + di->fcc/2)/di->fcc; /* x1 10 */
-
- real_soc = (di->line_k*temp_soc); /*y1=k0*x1*/
- di->display_soc = real_soc;
- DBG("[K >= 10]. (temp_soc)X0 = %d\n", temp_soc);
- DBG("[K >= 10]. in:line_k = %d\n", di->line_k);
- DBG("[K >= 10]. (dis-soc)Y0=%d,real-soc=%d\n",
- di->display_soc, di->real_soc);
-
- if ((real_soc+500)/1000 < di->real_soc){
- di->real_soc--;
- di->odd_capacity = 0;
- }
- else if (((real_soc+500))/1000 ==
- di->real_soc) {
- /*dec 1% LSB*/
- real_soc -= di->odd_capacity;
- if ((real_soc+500)/1000 <
- di->real_soc) {
- di->real_soc--;
- di->odd_capacity = 0;
- } else
- di->odd_capacity +=
- real_soc/3000+2;
- DBG("[k >= 10]. odd_capacity=%d\n",
- di->odd_capacity);
- }else
- di->odd_capacity = 0;
- _voltage_to_capacity(di, dead_voltage);
- di->q_dead = di->temp_nac;
- di->q_shtd = di->q_dead + di->q_err;
- temp_soc = ((di->remain_capacity - di->q_shtd)*
- 1000 + di->fcc/2)/di->fcc; /* z1 */
- if (temp_soc == 0)
- di->update_k = 0;
+ if (abs(di->current_avg) > 500)/* heavy */
+ di->zero_linek = 900;
else
- di->line_k = (di->display_soc +
- temp_soc/2)/temp_soc;
- DBG("[K >= 10]. out:line_k = %d\n", di->line_k);
+ di->zero_linek = 1000;
}
- di->update_k = 1;
- goto out;
- }
-
- else { /*update_k[1~9]*/
-
- di->update_k++;
-
- DBG("[K1~9]\n");
- temp_soc = ((di->remain_capacity - di->q_shtd)*
- 1000 + di->fcc/2)/di->fcc;
- di->display_soc = di->line_k*temp_soc;
- DBG("[K1~9]. (temp_soc)X0 = %d\n", temp_soc);
- DBG("[K1~9]. line_k = %d\n", di->line_k);
- DBG("[K1~9]. (dis-soc)Y0=%d,real-soc=%d\n",
- di->display_soc, di->real_soc);
- if ((di->display_soc+500)/1000 < di->real_soc){
- di->real_soc--;
- di->odd_capacity = 0;
- }
- else if ((real_soc+500)/1000 == di->real_soc) {
- /*dec 1% LSB*/
- real_soc -= di->odd_capacity;
- if ((real_soc+500)/1000 < di->real_soc) {
- di->real_soc--;
- di->odd_capacity = 0;
- } else
- di->odd_capacity += real_soc/3000+2;
- DBG("[K1~9]. odd_capacity=%d\n",
- di->odd_capacity);
- }else
- di->odd_capacity = 0;
+ DBG("ZERO-new: zero_linek adjust step5...\n");
+ /* dsoc[0~5], dsoc < xsoc */
+ } else if ((di->zero_linek < 1000) && (di->dsoc <= 5)) {
+ if ((xsoc - di->dsoc) <= 3)
+ di->zero_linek = 1300;
+ else
+ di->zero_linek = 800;
+ DBG("ZERO-new: zero_linek adjust step6...\n");
}
} else {
- DBG("second: q_ocv < di->q_dead\n");
- di->update_k++;
- if ((di->voltage < 3400) && (di->real_soc > 10)) {
- /*di->real_soc = 10;*/
-
- } else if (di->voltage < 3400) {
- /*10 -(3.4-Vbat)*100*I*/
- if (di->current_avg < 1000)
- soc_time = 10-((3400-di->voltage)/10*
- abs32_int(di->current_avg))/1000;
-
- DBG("<%s>. ZERO: decrease sec = %d\n",
- __func__, soc_time/2);
- if (di->update_k > soc_time/2) {
- di->update_k = 0;
- di->real_soc--;
- }
- } else {
- if (di->update_k > 10) {
- di->update_k = 0;
- di->real_soc--;
- }
+ /* xsoc < 0 */
+ di->zero_linek = 1000;
+ if (!di->zero_drop_sec)
+ di->zero_drop_sec = get_boot_sec();
+ if (base2sec(di->zero_drop_sec) >= WAIT_DSOC_DROP_SEC) {
+ DBG("ZERO0: t=%lu\n", base2sec(di->zero_drop_sec));
+ di->zero_drop_sec = 0;
+ di->dsoc--;
+ di->zero_dsoc = (di->dsoc + 1) * 1000 -
+ MIN_ACCURACY;
}
}
-out:
- if (di->line_k <= 0) {
- reset_zero_var(di);
- DBG("ZERO: line_k <= 0, Update line_k!\n");
+
+ if (voltage_avg < pwroff_vol - 70) {
+ if (!di->shtd_drop_sec)
+ di->shtd_drop_sec = get_boot_sec();
+ if (base2sec(di->shtd_drop_sec) > WAIT_SHTD_DROP_SEC) {
+ BAT_INFO("voltage extreme low...soc:%d->0\n", di->dsoc);
+ di->shtd_drop_sec = 0;
+ di->dsoc = 0;
+ }
+ } else {
+ di->shtd_drop_sec = 0;
}
- DBG("ZERO: update_k=%d, odd_cap=%d\n", di->update_k, di->odd_capacity);
- DBG("ZERO: q_ocv - q_dead=%d\n", (q_ocv-di->q_dead));
- DBG("ZERO: remain_cap - q_shtd=%d\n",
- (di->remain_capacity - di->q_shtd));
- DBG("ZERO: (line_k)K0 = %d,(disp-soc)Y0 = %d, (temp_soc)X0 = %d\n",
- di->line_k, di->display_soc, temp_soc);
- DBG("ZERO: remain_capacity=%d, q_shtd(nac)=%d, q_err(Q_rm-q_ocv)=%d\n",
- di->remain_capacity, di->q_shtd, di->q_err);
- DBG("ZERO: Warn_voltage=%d,temp_soc=%d,real_soc=%d\n\n",
- di->warnning_voltage, _get_soc(di), di->real_soc);
+ DBG("ZERO-new: org_linek=%d, zero_linek=%d, dsoc=%d, Xsoc=%d, "
+ "rsoc=%d, gap=%d, v=%d, vsys=%d\n"
+ "ZERO-new: di->zero_dsoc=%d, zero_remain_cap=%d, zero_drop=%ld, "
+ "sht_drop=%ld\n\n",
+ org_linek, di->zero_linek, di->dsoc, xsoc, di->rsoc,
+ min_gap_xsoc, voltage_avg, vsys, di->zero_dsoc, di->zero_remain_cap,
+ base2sec(di->zero_drop_sec), base2sec(di->shtd_drop_sec));
}
-
-static int estimate_bat_ocv_vol(struct battery_info *di)
+static void rk818_bat_finish_algo_prepare(struct rk818_battery *di)
{
- return (di->voltage -
- (di->bat_res * di->current_avg) / 1000);
+ di->finish_base = get_boot_sec();
+ if (!di->finish_base)
+ di->finish_base = 1;
}
-static int estimate_bat_ocv_soc(struct battery_info *di)
+static void rk818_bat_smooth_algo_prepare(struct rk818_battery *di)
{
- int ocv_soc, ocv_voltage;
-
- ocv_voltage = estimate_bat_ocv_vol(di);
- _voltage_to_capacity(di, ocv_voltage);
- ocv_soc = di->temp_soc;
+ int tmp_soc;
- return ocv_soc;
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc)
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc)
+ di->sm_dischrg_dsoc =
+ (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+
+ DBG("<%s>. tmp_soc=%d, dsoc=%d, dsoc:sm_dischrg=%d, sm_chrg=%d\n",
+ __func__, tmp_soc, di->dsoc, di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
+
+ rk818_bat_calc_sm_linek(di);
}
-static void rsoc_dischrg_calib(struct battery_info *di)
+static void rk818_bat_zero_algo_prepare(struct rk818_battery *di)
{
- int ocv_soc = di->est_ocv_soc;
- int ocv_volt = di->est_ocv_vol;
- int temp_soc = _get_soc(di);
- int max_volt = di->rk818->battery_data->max_charger_voltagemV;
+ int tmp_dsoc;
- if (ocv_volt > max_volt)
- goto out;
+ tmp_dsoc = di->zero_dsoc / 1000;
+ if (tmp_dsoc != di->dsoc)
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
- if (di->discharge_min >= RSOC_CALIB_DISCHGR_TIME) {
- if ((ocv_soc-temp_soc >= RSOC_DISCHG_ERR_LOWER) ||
- (di->temp_soc == 0) ||
- (temp_soc-ocv_soc >= RSOC_DISCHG_ERR_UPPER)) {
-
- di->err_chck_cnt++;
- di->err_soc_sum += ocv_soc;
- } else
- goto out;
-
- DBG("<%s>. rsoc err_chck_cnt = %d\n",
- __func__, di->err_chck_cnt);
- DBG("<%s>. rsoc err_soc_sum = %d\n",
- __func__, di->err_soc_sum);
-
- if (di->err_chck_cnt >= RSOC_ERR_CHCK_CNT) {
-
- ocv_soc = di->err_soc_sum / RSOC_ERR_CHCK_CNT;
- if (temp_soc-ocv_soc >= RSOC_DISCHG_ERR_UPPER)
- ocv_soc += RSOC_COMPS;
-
- di->temp_nac = ocv_soc * di->fcc / 100;
- _capacity_init(di, di->temp_nac);
- di->temp_soc = _get_soc(di);
- di->remain_capacity = _get_realtime_capacity(di);
- di->err_soc_sum = 0;
- di->err_chck_cnt = 0;
- DBG("<%s>. update: rsoc = %d\n", __func__, ocv_soc);
- }
- } else {
-out:
- di->err_chck_cnt = 0;
- di->err_soc_sum = 0;
- }
+ DBG("<%s>. first calc, reinit linek\n", __func__);
+ rk818_bat_calc_zero_linek(di);
}
-static void rsoc_realtime_calib(struct battery_info *di)
+static void rk818_bat_calc_zero_algorithm(struct rk818_battery *di)
{
- u8 status = di->status;
+ int tmp_soc = 0, sm_delta_dsoc = 0;
- if ((status == POWER_SUPPLY_STATUS_CHARGING) ||
- (status == POWER_SUPPLY_STATUS_FULL)) {
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ goto out;
- if ((di->current_avg < -10) &&
- (di->charge_status != CHARGE_FINISH))
- rsoc_dischrg_calib(di);
- /*
- else
- rsoc_chrg_calib(di);
- */
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d\n", __func__, di->dsoc, di->rsoc);
+ /* when discharge slow down, take sm chrg into calc */
+ if (di->dsoc < di->rsoc) {
+ /* take sm charge rest into calc */
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_chrg_dsoc - di->dsoc * 1000;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ di->zero_dsoc += sm_delta_dsoc;
+ DBG("ZERO1: take sm chrg,delta=%d\n", sm_delta_dsoc);
+ }
+ }
- } else if (status == POWER_SUPPLY_STATUS_DISCHARGING) {
- rsoc_dischrg_calib(di);
+ /* when discharge speed up, take sm dischrg into calc */
+ if (di->dsoc > di->rsoc) {
+ /* take sm discharge rest into calc */
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_dischrg_dsoc -
+ ((di->dsoc + 1) * 1000 - MIN_ACCURACY);
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 -
+ MIN_ACCURACY;
+ di->zero_dsoc += sm_delta_dsoc;
+ DBG("ZERO1: take sm dischrg,delta=%d\n", sm_delta_dsoc);
+ }
}
-}
-static bool do_ac_charger_emulator(struct battery_info *di)
-{
- int delta_soc = di->temp_soc - di->real_soc;
- u32 soc_time;
+ /* check overflow */
+ if (di->zero_dsoc > (di->dsoc + 1) * 1000 - MIN_ACCURACY) {
+ DBG("ZERO1: zero dsoc overflow: %d\n", di->zero_dsoc);
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ }
- if ((di->charge_status != CHARGE_FINISH)
- && (di->ac_online)
- && (delta_soc >= DSOC_CHRG_FAST_EER_RANGE)){
-
- soc_time = di->fcc*3600/100/(abs_int(DSOC_CHRG_EMU_CURR));
- di->emu_chg_cnt++;
- if (di->emu_chg_cnt > soc_time) {
- di->real_soc++;
- di->emu_chg_cnt = 0;
+ /* check new dsoc */
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc != di->dsoc) {
+ /* avoid dsoc jump when heavy load */
+ if ((di->dsoc - tmp_soc) > 1) {
+ di->dsoc--;
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ DBG("ZERO1: heavy load...\n");
+ } else {
+ di->dsoc = tmp_soc;
}
- DBG("<%s>. soc_time=%d, emu_cnt=%d\n",
- __func__, soc_time, di->emu_chg_cnt);
-
- return true;
+ di->zero_drop_sec = 0;
}
- return false;
+out:
+ DBG("ZERO1: zero_dsoc(Y0)=%d, dsoc=%d, rsoc=%d, tmp_soc=%d\n",
+ di->zero_dsoc, di->dsoc, di->rsoc, tmp_soc);
+ DBG("ZERO1: sm_dischrg_dsoc=%d, sm_chrg_dsoc=%d\n",
+ di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
}
-static bool do_term_chrg_cali(struct battery_info *di)
+static void rk818_bat_zero_algorithm(struct rk818_battery *di)
{
- u32 soc_time;
+ int delta_cap = 0, delta_soc = 0;
- if (di->ac_online &&
- (di->real_soc >= 90)&&
- (di->current_avg > 600)){
+ di->zero_timeout_cnt++;
+ delta_cap = di->zero_remain_cap - di->remain_cap;
+ delta_soc = di->zero_linek * (delta_cap * 100) / DIV(di->fcc);
- soc_time = di->fcc*3600/100/(abs32_int(DSOC_CHG_TERM_CURR));
- di->term_chg_cnt++;
- if (di->term_chg_cnt > soc_time) {
- di->real_soc++;
- di->term_chg_cnt = 0;
- }
- DBG("<%s>. soc_time=%d, term_cnt=%d\n",
- __func__, soc_time, di->term_chg_cnt);
+ DBG("ZERO1: zero_linek=%d, zero_dsoc(Y0)=%d, dsoc=%d, rsoc=%d\n"
+ "ZERO1: delta_soc(X0)=%d, delta_cap=%d, zero_remain_cap = %d\n"
+ "ZERO1: timeout_cnt=%d, sm_dischrg=%d, sm_chrg=%d\n\n",
+ di->zero_linek, di->zero_dsoc, di->dsoc, di->rsoc,
+ delta_soc, delta_cap, di->zero_remain_cap,
+ di->zero_timeout_cnt, di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
- return true;
+ if ((delta_soc >= MIN_ZERO_DSOC_ACCURACY) ||
+ (di->zero_timeout_cnt > MIN_ZERO_OVERCNT) ||
+ (di->zero_linek == 0)) {
+ DBG("ZERO1:--------- enter calc -----------\n");
+ di->zero_timeout_cnt = 0;
+ di->zero_dsoc -= delta_soc;
+ rk818_bat_calc_zero_algorithm(di);
+ rk818_bat_calc_zero_linek(di);
}
-
- return false;
}
-static void voltage_to_soc_discharge_smooth(struct battery_info *di)
-{
- int voltage;
- int now_current, soc_time = -1;
- int volt_to_soc;
- int delta_soc = di->real_soc - di->temp_soc;
-
- voltage = di->voltage;
- now_current = di->current_avg;
- if (now_current == 0)
- now_current = 1;
-
- if (delta_soc > DSOC_DISCHRG_FAST_EER_RANGE){
- soc_time = DSOC_DISCHRG_FAST_DEC_SEC;
- DBG("<%s>. dsoc decrease fast! delta_soc = %d\n",
- __func__, delta_soc);
- } else
- soc_time = di->fcc*3600/100/(abs_int(now_current));
- _voltage_to_capacity(di, 3800);
- volt_to_soc = di->temp_soc;
- di->temp_soc = _get_soc(di);
-
- DBG("<%s>. 3.8v ocv_to_soc = %d\n", __func__, volt_to_soc);
- DBG("<%s>. di->temp_soc = %d, di->real_soc = %d\n", __func__, di->temp_soc, di->real_soc);
- if ((di->voltage < 3800) || (di->voltage > 3800 && di->real_soc < volt_to_soc)) { /* di->warnning_voltage) */
- zero_get_soc(di);
- return;
+static void rk818_bat_dump_time_table(struct rk818_battery *di)
+{
+ u8 i;
+ static int old_index;
+ static int old_min;
+ int mod = di->dsoc % 10;
+ int index = di->dsoc / 10;
+ u32 time;
- } else if (di->temp_soc == di->real_soc) {
- DBG("<%s>. di->temp_soc == di->real_soc\n", __func__);
- } else if (di->temp_soc > di->real_soc) {
- DBG("<%s>. di->temp_soc > di->real_soc\n", __func__);
- di->vol_smooth_time++;
- if (di->vol_smooth_time > soc_time*3/2) {
- di->real_soc--;
- di->vol_smooth_time = 0;
- }
+ if (rk818_bat_chrg_online(di))
+ time = base2min(di->plug_in_base);
+ else
+ time = base2min(di->plug_out_base);
- } else {
- DBG("<%s>. di->temp_soc < di->real_soc\n", __func__);
- if (di->real_soc == (di->temp_soc + 1)) {
- di->change_timer = di->soc_timer;
- di->real_soc = di->temp_soc;
- } else {
- di->vol_smooth_time++;
- if (di->vol_smooth_time > soc_time*3/4) {
- di->real_soc--;
- di->vol_smooth_time = 0;
- }
- }
+ if ((mod == 0) && (index > 0) && (old_index != index)) {
+ di->dbg_chrg_min[index - 1] = time - old_min;
+ old_min = time;
+ old_index = index;
}
- reset_zero_var(di);
- DBG("<%s>, di->temp_soc = %d, di->real_soc = %d\n", __func__, di->temp_soc, di->real_soc);
- DBG("<%s>, di->vol_smooth_time = %d, soc_time = %d\n", __func__, di->vol_smooth_time, soc_time);
-}
-static int get_charging_time(struct battery_info *di)
-{
- return (di->charging_time/60);
+ for (i = 1; i < 11; i++)
+ DBG("Time[%d]=%d, ", (i * 10), di->dbg_chrg_min[i - 1]);
+ DBG("\n");
}
-static int get_discharging_time(struct battery_info *di)
+static void rk818_bat_debug_info(struct rk818_battery *di)
{
- return (di->discharging_time/60);
-}
+ u8 sup_tst, ggcon, ggsts, vb_mod, ts_ctrl, reboot_cnt;
+ u8 usb_ctrl, chrg_ctrl1, thermal;
+ u8 int_sts1, int_sts2;
+ u8 int_msk1, int_msk2;
+ u8 chrg_ctrl2, chrg_ctrl3, rtc, misc, dcdc_en;
+ char *work_mode[] = {"ZERO", "FINISH", "UN", "UN", "SMOOTH"};
+ char *bat_mode[] = {"BAT", "VIRTUAL"};
-static int get_finish_time(struct battery_info *di)
-{
- return (di->finish_time/60);
-}
+ if (rk818_bat_chrg_online(di))
+ di->plug_out_base = get_boot_sec();
+ else
+ di->plug_in_base = get_boot_sec();
-static void dump_debug_info(struct battery_info *di)
-{
- u8 sup_tst_reg, ggcon_reg, ggsts_reg, vb_mod_reg;
- u8 usb_ctrl_reg, chrg_ctrl_reg1;
- u8 chrg_ctrl_reg2, chrg_ctrl_reg3, rtc_val;
+ rk818_bat_dump_time_table(di);
- battery_read(di->rk818, GGCON, &ggcon_reg, 1);
- battery_read(di->rk818, GGSTS, &ggsts_reg, 1);
- battery_read(di->rk818, SUP_STS_REG, &sup_tst_reg, 1);
- battery_read(di->rk818, VB_MOD_REG, &vb_mod_reg, 1);
- battery_read(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- battery_read(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- battery_read(di->rk818, CHRG_CTRL_REG2, &chrg_ctrl_reg2, 1);
- battery_read(di->rk818, CHRG_CTRL_REG3, &chrg_ctrl_reg3, 1);
- battery_read(di->rk818, 0x00, &rtc_val, 1);
+ if (!dbg_enable)
+ return;
- DBG("\n------------- dump_debug_regs -----------------\n"
- "GGCON = 0x%2x, GGSTS = 0x%2x, RTC = 0x%2x\n"
- "SUP_STS_REG = 0x%2x, VB_MOD_REG = 0x%2x\n"
- "USB_CTRL_REG = 0x%2x, CHRG_CTRL_REG1 = 0x%2x\n"
- "CHRG_CTRL_REG2 = 0x%2x, CHRG_CTRL_REG3 = 0x%2x\n\n",
- ggcon_reg, ggsts_reg, rtc_val,
- sup_tst_reg, vb_mod_reg,
- usb_ctrl_reg, chrg_ctrl_reg1,
- chrg_ctrl_reg2, chrg_ctrl_reg3
+ ts_ctrl = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ misc = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ ggsts = rk818_bat_read(di, RK818_GGSTS_REG);
+ sup_tst = rk818_bat_read(di, RK818_SUP_STS_REG);
+ vb_mod = rk818_bat_read(di, RK818_VB_MON_REG);
+ usb_ctrl = rk818_bat_read(di, RK818_USB_CTRL_REG);
+ chrg_ctrl1 = rk818_bat_read(di, RK818_CHRG_CTRL_REG1);
+ chrg_ctrl2 = rk818_bat_read(di, RK818_CHRG_CTRL_REG2);
+ chrg_ctrl3 = rk818_bat_read(di, RK818_CHRG_CTRL_REG3);
+ rtc = rk818_bat_read(di, 0);
+ thermal = rk818_bat_read(di, RK818_THERMAL_REG);
+ int_sts1 = rk818_bat_read(di, RK818_INT_STS_REG1);
+ int_sts2 = rk818_bat_read(di, RK818_INT_STS_REG2);
+ int_msk1 = rk818_bat_read(di, RK818_INT_STS_MSK_REG1);
+ int_msk2 = rk818_bat_read(di, RK818_INT_STS_MSK_REG2);
+ dcdc_en = rk818_bat_read(di, RK818_DCDC_EN_REG);
+ reboot_cnt = rk818_bat_read(di, RK818_REBOOT_CNT_REG);
+
+ DBG("\n------- DEBUG REGS, [Ver: %s] -------------------\n"
+ "GGCON=0x%2x, GGSTS=0x%2x, RTC=0x%2x, DCDC_EN2=0x%2x\n"
+ "SUP_STS= 0x%2x, VB_MOD=0x%2x, USB_CTRL=0x%2x\n"
+ "THERMAL=0x%2x, MISC_MARK=0x%2x, TS_CTRL=0x%2x\n"
+ "CHRG_CTRL:REG1=0x%2x, REG2=0x%2x, REG3=0x%2x\n"
+ "INT_STS: REG1=0x%2x, REG2=0x%2x\n"
+ "INT_MSK: REG1=0x%2x, REG2=0x%2x\n",
+ DRIVER_VERSION, ggcon, ggsts, rtc, dcdc_en,
+ sup_tst, vb_mod, usb_ctrl,
+ thermal, misc, ts_ctrl,
+ chrg_ctrl1, chrg_ctrl2, chrg_ctrl3,
+ int_sts1, int_sts2, int_msk1, int_msk2
);
- DBG(
- "########################## [read] ################################\n"
- "-----------------------------------------------------------------\n"
- "realx-voltage = %d, voltage = %d, current-avg = %d\n"
- "fcc = %d, remain_capacity = %d, ocv_volt = %d\n"
- "check_ocv = %d, check_soc = %d, bat_res = %d\n"
- "diplay_soc = %d, cpapacity_soc = %d\n"
- "AC-ONLINE = %d, USB-ONLINE = %d, charging_status = %d\n"
- "finish_real_soc = %d, finish_temp_soc = %d\n"
- "chrg_time = %d, dischrg_time = %d, finish_time = %d\n",
- get_relax_voltage(di),
- di->voltage, di->current_avg,
- di->fcc, di->remain_capacity, _get_OCV_voltage(di),
- di->est_ocv_vol, di->est_ocv_soc, di->bat_res,
- di->real_soc, _get_soc(di),
- di->ac_online, di->usb_online, di->status,
- di->debug_finish_real_soc, di->debug_finish_temp_soc,
- get_charging_time(di), get_discharging_time(di), get_finish_time(di)
+ DBG("###############################################################\n"
+ "Dsoc=%d, Rsoc=%d, Vavg=%d, Iavg=%d, Cap=%d, Fcc=%d, d=%d\n"
+ "K=%d, Mode=%s, Oldcap=%d, Is=%d, Ip=%d, Vs=%d\n"
+ "shtd_min=%d, fb_temp=%d, bat_temp=%d, sample_res=%d\n"
+ "off:i=0x%x, c=0x%x, p=%d, Rbat=%d, age_ocv_cap=%d, fb=%d\n"
+ "adp:finish=%lu, boot_min=%lu, sleep_min=%lu, adc=%d, Vsys=%d\n"
+ "bat:%s, meet: soc=%d, calc: dsoc=%d, rsoc=%d, Vocv=%d\n"
+ "pwr: dsoc=%d, rsoc=%d, vol=%d, halt: st=%d, cnt=%d, reboot=%d\n"
+ "max=%d, init=%d, sw=%d, ocv_c=%d, below0=%d, changed=%d\n"
+ "###############################################################\n",
+ di->dsoc, di->rsoc, di->voltage_avg, di->current_avg,
+ di->remain_cap, di->fcc, di->rsoc - di->dsoc,
+ di->sm_linek, work_mode[di->work_mode], di->sm_remain_cap,
+ di->res_div * chrg_cur_sel_array[chrg_ctrl1 & 0x0f],
+ chrg_cur_input_array[usb_ctrl & 0x0f],
+ chrg_vol_sel_array[(chrg_ctrl1 & 0x70) >> 4],
+ di->pwroff_min,
+ feedback_temp_array[(thermal & 0x0c) >> 2], di->temperature,
+ di->pdata->sample_res, rk818_bat_get_ioffset(di),
+ rk818_bat_get_coffset(di), di->poffset, di->bat_res,
+ di->age_adjust_cap, di->fb_blank, base2min(di->finish_base),
+ base2min(di->boot_base), di->sleep_sum_sec / 60,
+ di->adc_allow_update,
+ di->voltage_avg + di->current_avg * DEF_PWRPATH_RES / 1000,
+ bat_mode[di->pdata->bat_mode], di->dbg_meet_soc, di->dbg_calc_dsoc,
+ di->dbg_calc_rsoc, di->voltage_ocv, di->dbg_pwr_dsoc,
+ di->dbg_pwr_rsoc, di->dbg_pwr_vol, di->is_halt, di->halt_cnt,
+ reboot_cnt, di->is_max_soc_offset, di->is_initialized,
+ di->is_sw_reset, di->is_ocv_calib, di->dbg_cap_low0, di->last_dsoc
);
- get_charge_status(di);
- DBG("################################################################\n");
}
-static void update_fcc_capacity(struct battery_info *di)
+static void rk818_bat_init_capacity(struct rk818_battery *di, u32 cap)
{
- if ((di->charge_status == CHARGE_FINISH) && (di->dod0_status == 1)) {
- if (get_level(di) >= di->dod0_level) {
- di->fcc = (di->remain_capacity - di->dod0_capacity)*100/(100-di->dod0);
- if (di->fcc > di->qmax)
- di->fcc = di->qmax;
+ int delta_cap;
- _capacity_init(di, di->fcc);
- _save_FCC_capacity(di, di->fcc);
- }
- di->dod0_status = 0;
- }
-}
+ delta_cap = cap - di->remain_cap;
+ if (!delta_cap)
+ return;
-static void debug_get_finish_soc(struct battery_info *di)
-{
- if (di->charge_status == CHARGE_FINISH) {
- di->debug_finish_real_soc = di->real_soc;
- di->debug_finish_temp_soc = di->temp_soc;
- }
+ di->age_adjust_cap += delta_cap;
+ rk818_bat_init_coulomb_cap(di, cap);
+ rk818_bat_smooth_algo_prepare(di);
+ rk818_bat_zero_algo_prepare(di);
}
-static void wait_charge_finish_signal(struct battery_info *di)
+static void rk818_bat_update_age_fcc(struct rk818_battery *di)
{
- if (di->charge_status == CHARGE_FINISH)
- update_fcc_capacity(di);/* save new fcc*/
+ int fcc, remain_cap, age_keep_min, lock_fcc;
- /* debug msg*/
- debug_get_finish_soc(di);
-}
+ lock_fcc = rk818_bat_get_coulomb_cap(di);
+ remain_cap = lock_fcc - di->age_ocv_cap - di->age_adjust_cap;
+ age_keep_min = base2min(di->age_keep_sec);
-static void charge_finish_routine(struct battery_info *di)
-{
- if ((di->charge_status == CHARGE_FINISH)&&
- (di->finish_min >= 1)) {
- _capacity_init(di, di->fcc);
- zero_current_calibration(di);
+ DBG("<%s>. lock_fcc=%d, age:ocv_cap=%d, adjust_cap=%d, remain_cap=%d, "
+ "allow_update=%d, keep_min:%d\n",
+ __func__, lock_fcc, di->age_ocv_cap, di->age_adjust_cap, remain_cap,
+ di->age_allow_update, age_keep_min);
- if (di->real_soc < 100) {
- DBG("<%s>,CHARGE_FINISH di->real_soc < 100, real_soc=%d\n", __func__, di->real_soc);
- if ((di->soc_counter < 80)) {
- di->soc_counter++;
- } else {
- di->soc_counter = 0;
- di->real_soc++;
- }
+ if ((di->chrg_status == CHARGE_FINISH) && (di->age_allow_update) &&
+ (age_keep_min < 1200)) {
+ di->age_allow_update = false;
+ fcc = remain_cap * 100 / DIV(100 - di->age_ocv_soc);
+ BAT_INFO("lock_fcc=%d, calc_cap=%d, age: soc=%d, cap=%d, "
+ "level=%d, fcc:%d->%d?\n",
+ lock_fcc, remain_cap, di->age_ocv_soc,
+ di->age_ocv_cap, di->age_level, di->fcc, fcc);
+
+ if ((fcc < di->qmax) && (fcc > MIN_FCC)) {
+ BAT_INFO("fcc:%d->%d!\n", di->fcc, fcc);
+ di->fcc = fcc;
+ rk818_bat_init_capacity(di, di->fcc);
+ rk818_bat_save_fcc(di, di->fcc);
+ rk818_bat_save_age_level(di, di->age_level);
}
}
}
-static void voltage_to_soc_charge_smooth(struct battery_info *di)
+static void rk818_bat_wait_finish_sig(struct rk818_battery *di)
{
- int now_current, soc_time;
-
- reset_zero_var(di);
- /*calibrate: aim to match finish signal*/
- if (do_term_chrg_cali(di))
- return;
+ int chrg_finish_vol = di->pdata->max_chrg_voltage;
- /*calibrate: aim to calib error*/
- di->term_chg_cnt = 0;
- if (do_ac_charger_emulator(di))
+ if (!rk818_bat_chrg_online(di))
return;
- di->emu_chg_cnt = 0;
- now_current = _get_average_current(di);
- if (now_current == 0)
- now_current = 1;
-
- soc_time = di->fcc*3600/100/(abs_int(now_current)); /* 1% time; */
- di->temp_soc = _get_soc(di);
-
- DBG("<%s>. di->temp_soc = %d, di->real_soc = %d\n", __func__, di->temp_soc, di->real_soc);
-
- if (di->real_soc == di->temp_soc) {
- DBG("<%s>. di->temp_soc == di->real_soc\n", __func__);
- di->temp_soc = _get_soc(di);
+ if ((di->chrg_status == CHARGE_FINISH) && (di->adc_allow_update) &&
+ (di->voltage_avg > chrg_finish_vol - 150)) {
+ rk818_bat_update_age_fcc(di);
+ if (rk818_bat_adc_calib(di))
+ di->adc_allow_update = false;
}
- if ((di->temp_soc != di->real_soc) && (now_current != 0)) {
-
- if (di->temp_soc < di->real_soc + 1) {
- DBG("<%s>. di->temp_soc < di->real_soc\n", __func__);
- di->charge_smooth_time++;
- if (di->charge_smooth_time > soc_time*3/2) {
- di->real_soc++;
- di->charge_smooth_time = 0;
- }
- di->charge_smooth_status = true;
- }
+}
- else if (di->temp_soc > di->real_soc + 1) {
- DBG("<%s>. di->temp_soc > di->real_soc\n", __func__);
- di->charge_smooth_time++;
- if (di->charge_smooth_time > soc_time*3/4) {
- di->real_soc++;
- di->charge_smooth_time = 0;
- }
- di->charge_smooth_status = true;
-
- } else if (di->temp_soc == di->real_soc + 1) {
- DBG("<%s>. di->temp_soc == di->real_soc + 1\n", __func__);
- if (di->charge_smooth_status) {
- di->charge_smooth_time++;
- if (di->charge_smooth_time > soc_time*3/4) {
- di->real_soc = di->temp_soc;
- di->charge_smooth_time = 0;
- di->charge_smooth_status = false;
- }
+static void rk818_bat_finish_algorithm(struct rk818_battery *di)
+{
+ unsigned long finish_sec, soc_sec;
+ int plus_soc, rest = 0;
- } else {
- di->real_soc = di->temp_soc;
- di->charge_smooth_status = false;
+ /* rsoc */
+ if ((di->remain_cap != di->fcc) &&
+ (rk818_bat_get_chrg_status(di) == CHARGE_FINISH)) {
+ di->age_adjust_cap += (di->fcc - di->remain_cap);
+ rk818_bat_init_coulomb_cap(di, di->fcc);
+ }
- }
+ /* dsoc */
+ if (di->dsoc < 100) {
+ if (!di->finish_base)
+ di->finish_base = get_boot_sec();
+ finish_sec = base2sec(di->finish_base);
+ soc_sec = di->fcc * 3600 / 100 / FINISH_CHRG_CUR;
+ plus_soc = finish_sec / soc_sec;
+ if (finish_sec > soc_sec) {
+ rest = finish_sec % soc_sec;
+ di->dsoc += plus_soc;
+ di->finish_base = get_boot_sec();
+ if (di->finish_base > rest)
+ di->finish_base = get_boot_sec() - rest;
}
+ DBG("<%s>.CHARGE_FINISH:dsoc<100,dsoc=%d\n"
+ "soc_time=%lu, sec_finish=%lu, plus_soc=%d, rest=%d\n",
+ __func__, di->dsoc, soc_sec, finish_sec, plus_soc, rest);
}
-
- DBG("<%s>, di->temp_soc = %d, di->real_soc = %d\n", __func__, di->temp_soc, di->real_soc);
- DBG("<%s>, di->vol_smooth_time = %d, soc_time = %d\n", __func__, di->charge_smooth_time, soc_time);
}
-static void rk_battery_display_smooth(struct battery_info *di)
+static void rk818_bat_calc_smooth_dischrg(struct rk818_battery *di)
{
- int status;
- u8 charge_status;
+ int tmp_soc = 0, sm_delta_dsoc = 0, zero_delta_dsoc = 0;
- status = di->status;
- charge_status = di->charge_status;
- if ((status == POWER_SUPPLY_STATUS_CHARGING) || (status == POWER_SUPPLY_STATUS_FULL)) {
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ goto out;
- if ((di->current_avg < -10) && (charge_status != CHARGE_FINISH))
- voltage_to_soc_discharge_smooth(di);
- else
- voltage_to_soc_charge_smooth(di);
-
- } else if (status == POWER_SUPPLY_STATUS_DISCHARGING) {
- voltage_to_soc_discharge_smooth(di);
- if (di->real_soc == 1) {
- di->time2empty++;
- if (di->time2empty >= 300)
- di->real_soc = 0;
- } else {
- di->time2empty = 0;
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d\n", __func__, di->dsoc, di->rsoc);
+ /* when dischrge slow down, take sm charge rest into calc */
+ if (di->dsoc < di->rsoc) {
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_chrg_dsoc - di->dsoc * 1000;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ di->sm_dischrg_dsoc += sm_delta_dsoc;
+ DBG("<%s>. take sm dischrg, delta=%d\n",
+ __func__, sm_delta_dsoc);
}
}
-}
+ /* when discharge speed up, take zero discharge rest into calc */
+ if (di->dsoc > di->rsoc) {
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ zero_delta_dsoc = di->zero_dsoc - ((di->dsoc + 1) *
+ 1000 - MIN_ACCURACY);
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ di->sm_dischrg_dsoc += zero_delta_dsoc;
+ DBG("<%s>. take zero schrg, delta=%d\n",
+ __func__, zero_delta_dsoc);
+ }
+ }
-#if 0
-static void software_recharge(struct battery_info *di, int max_cnt)
-{
- static int recharge_cnt;
- u8 chrg_ctrl_reg1;
-
- if ((CHARGE_FINISH == get_charge_status(di)) && (rk_battery_voltage(di) < 4100) && (recharge_cnt < max_cnt)) {
- battery_read(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- chrg_ctrl_reg1 &= ~(1 << 7);
- battery_write(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- battery_read(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- DBG("recharge, clear bit7, CHRG_CTRL_REG1 = 0x%x\n", chrg_ctrl_reg1);
- msleep(400);
- chrg_ctrl_reg1 |= (1 << 7);
- battery_write(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- battery_read(di->rk818, CHRG_CTRL_REG1, &chrg_ctrl_reg1, 1);
- DBG("recharge, set bit7, CHRG_CTRL_REG1 = 0x%x\n", chrg_ctrl_reg1);
-
- recharge_cnt++;
+ /* check up overflow */
+ if ((di->sm_dischrg_dsoc) > ((di->dsoc + 1) * 1000 - MIN_ACCURACY)) {
+ DBG("<%s>. dischrg_dsoc up overflow\n", __func__);
+ di->sm_dischrg_dsoc = (di->dsoc + 1) *
+ 1000 - MIN_ACCURACY;
}
-}
-#endif
-
-#if 0
-static int estimate_battery_resister(struct battery_info *di)
-{
- int i;
- int avr_voltage1 = 0, avr_current1;
- int avr_voltage2 = 0, avr_current2;
- u8 usb_ctrl_reg;
- int bat_res, ocv_votage;
- static unsigned long last_time;
- unsigned long delta_time;
- int charge_ocv_voltage1, charge_ocv_voltage2;
- int charge_ocv_soc1, charge_ocv_soc2;
-
- delta_time = get_seconds() - last_time;
- DBG("<%s>--- delta_time = %lu\n", __func__, delta_time);
- if (delta_time >= 20) {/*20s*/
-
- /*first sample*/
- set_charge_current(di, ILIM_450MA);/*450mA*/
- msleep(1000);
- for (i = 0; i < 10 ; i++) {
- msleep(100);
- avr_voltage1 += rk_battery_voltage(di);
- }
- avr_voltage1 /= 10;
- avr_current1 = _get_average_current(di);
- battery_read(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- DBG("------------------------------------------------------------------------------------------\n");
- DBG("avr_voltage1 = %d, avr_current1 = %d, USB_CTRL_REG = 0x%x\n", avr_voltage1, avr_current1, usb_ctrl_reg);
-
- /*second sample*/
- set_charge_current(di, ILIM_3000MA);
- msleep(1000);
- for (i = 0; i < 10 ; i++) {
- msleep(100);
- avr_voltage2 += rk_battery_voltage(di);
- }
- avr_voltage2 /= 10;
- avr_current2 = _get_average_current(di);
- battery_read(di->rk818, USB_CTRL_REG, &usb_ctrl_reg, 1);
- DBG("avr_voltage2 = %d, avr_current2 = %d, USB_CTRL_REG = 0x%x\n", avr_voltage2, avr_current2, usb_ctrl_reg);
-
- /*calc resister and ocv_votage ocv*/
- bat_res = (avr_voltage1 - avr_voltage2)*1000/(avr_current1 - avr_current2);
- ocv_votage = avr_voltage1 - (bat_res * avr_current1) / 1000;
- DBG("bat_res = %d, OCV = %d\n", bat_res, ocv_votage);
- /*calc sample voltage ocv*/
- charge_ocv_voltage1 = avr_voltage1 - avr_current1*200/1000;
- charge_ocv_voltage2 = avr_voltage2 - avr_current2*200/1000;
- _voltage_to_capacity(di, charge_ocv_voltage1);
- charge_ocv_soc1 = di->temp_soc;
- _voltage_to_capacity(di, charge_ocv_voltage2);
- charge_ocv_soc2 = di->temp_soc;
-
- DBG("charge_ocv_voltage1 = %d, charge_ocv_soc1 = %d\n", charge_ocv_voltage1, charge_ocv_soc1);
- DBG("charge_ocv_voltage2 = %d, charge_ocv_soc2 = %d\n", charge_ocv_voltage2, charge_ocv_soc2);
- DBG("------------------------------------------------------------------------------------------\n");
- last_time = get_seconds();
-
- return bat_res;
+ /* check new dsoc */
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc) {
+ di->dsoc = tmp_soc;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
}
+out:
+ DBG("<%s>. dsoc=%d, rsoc=%d, dsoc:sm_dischrg=%d, sm_chrg=%d, zero=%d\n",
+ __func__, di->dsoc, di->rsoc, di->sm_dischrg_dsoc, di->sm_chrg_dsoc,
+ di->zero_dsoc);
- return 0;
}
-#endif
-#if 0
-static int update_battery_resister(struct battery_info *di)
+static void rk818_bat_calc_smooth_chrg(struct rk818_battery *di)
{
- int tmp_res;
+ int tmp_soc = 0, sm_delta_dsoc = 0, zero_delta_dsoc = 0;
- if ((get_charging_time(di) > 5) && (!di->bat_res_updated)) {/*charge at least 8min*/
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ goto out;
- if ((di->temp_soc >= 80) && (di->bat_res_update_cnt < 10)) {
- tmp_res = estimate_battery_resister(di);
- if (tmp_res != 0)
- di->bat_res_update_cnt++;
- di->bat_res += tmp_res;
- DBG("<%s>. tmp_bat_res = %d, bat_res_update_cnt = %d\n", __func__, tmp_res, di->bat_res_update_cnt);
- if (di->bat_res_update_cnt == 10) {
- di->bat_res_updated = true;
- di->bat_res /= 10;
- }
- DBG("<%s>. bat_res = %d, bat_res_update_cnt = %d\n", __func__, di->bat_res, di->bat_res_update_cnt);
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d\n", __func__, di->dsoc, di->rsoc);
+ /* when charge slow down, take zero & sm dischrg into calc */
+ if (di->dsoc > di->rsoc) {
+ /* take sm discharge rest into calc */
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_dischrg_dsoc -
+ ((di->dsoc + 1) * 1000 - MIN_ACCURACY);
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 -
+ MIN_ACCURACY;
+ di->sm_chrg_dsoc += sm_delta_dsoc;
+ DBG("<%s>. take sm dischrg, delta=%d\n",
+ __func__, sm_delta_dsoc);
}
- }
-
- return tmp_res;
-}
-#endif
-
-#if 0
-static void charge_soc_check_routine(struct battery_info *di)
-{
- int min;
- int ocv_voltage;
- int old_temp_soc;
- int ocv_temp_soc;
- int remain_capcity;
-
- if (di->status == POWER_SUPPLY_STATUS_CHARGING) {
- min = get_charging_time(di);
- update_battery_resister(di);
- if (0)
- if ((min >= 30) && (di->bat_res_updated)) {
- old_temp_soc = di->temp_soc;
- ocv_voltage = di->voltage + di->bat_res*abs(di->current_avg);
- _voltage_to_capacity(di, ocv_voltage);
- ocv_temp_soc = di->temp_soc;
-
- DBG("<%s>. charge_soc_updated_point0 = %d, charge_soc_updated_point1 = %d\n", __func__, di->charge_soc_updated_point0, di->charge_soc_updated_point1);
- DBG("<%s>. ocv_voltage = %d, ocv_soc = %d\n", __func__, ocv_voltage, ocv_temp_soc);
- DBG("<%s>. voltage = %d, temp_soc = %d\n", __func__, di->voltage, old_temp_soc);
-
- if (abs32_int(ocv_temp_soc - old_temp_soc) > 10)
- di->temp_soc = ocv_temp_soc;
- else
- di->temp_soc = old_temp_soc*50/100 + ocv_temp_soc*50/100;
-
- remain_capcity = di->temp_soc * di->fcc / 100;
- _capacity_init(di, remain_capcity);
- di->remain_capacity = _get_realtime_capacity(di);
- DBG("<%s>. old_temp_soc = %d, updated_temp_soc = %d\n", __func__, old_temp_soc, di->temp_soc);
+ /* take zero discharge rest into calc */
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ zero_delta_dsoc = di->zero_dsoc -
+ ((di->dsoc + 1) * 1000 - MIN_ACCURACY);
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ di->sm_chrg_dsoc += zero_delta_dsoc;
+ DBG("<%s>. take zero dischrg, delta=%d\n",
+ __func__, zero_delta_dsoc);
}
}
-}
-#endif
-
-#if 1
-static void update_resume_status_relax_voltage(struct battery_info *di)
-{
- unsigned long sleep_soc;
- unsigned long sum_sleep_soc;
- unsigned long sleep_sec;
- int relax_voltage;
- u8 charge_status;
- int delta_capacity;
- int delta_soc;
- int sum_sleep_avr_current;
- int sleep_min;
-
- if (di->resume) {
- update_battery_info(di);
- di->resume = false;
- di->sys_wakeup = true;
-
- DBG("<%s>, resume----------checkstart\n", __func__);
- sleep_sec = get_seconds() - di->suspend_time_start;
- sleep_min = sleep_sec / 60;
-
- DBG("<%s>, resume, sleep_sec(s) = %lu, sleep_min = %d\n",
- __func__, sleep_sec, sleep_min);
-
- if (di->sleep_status == POWER_SUPPLY_STATUS_DISCHARGING) {
- DBG("<%s>, resume, POWER_SUPPLY_STATUS_DISCHARGING\n", __func__);
-
- delta_capacity = di->suspend_capacity - di->remain_capacity;
- delta_soc = di->suspend_temp_soc - _get_soc(di);
- di->dischrg_sum_sleep_capacity += delta_capacity;
- di->dischrg_sum_sleep_sec += sleep_sec;
-
- sum_sleep_soc = di->dischrg_sum_sleep_capacity * 100 / di->fcc;
- sum_sleep_avr_current = di->dischrg_sum_sleep_capacity * 3600 / di->dischrg_sum_sleep_sec;
-
- DBG("<%s>, resume, suspend_capacity=%d, resume_capacity=%d, real_soc = %d\n",
- __func__, di->suspend_capacity, di->remain_capacity, di->real_soc);
- DBG("<%s>, resume, delta_soc=%d, delta_capacity=%d, sum_sleep_avr_current=%d mA\n",
- __func__, delta_soc, delta_capacity, sum_sleep_avr_current);
- DBG("<%s>, resume, sum_sleep_soc=%lu, dischrg_sum_sleep_capacity=%lu, dischrg_sum_sleep_sec=%lu\n",
- __func__, sum_sleep_soc, di->dischrg_sum_sleep_capacity, di->dischrg_sum_sleep_sec);
- DBG("<%s>, relax_voltage=%d, voltage = %d\n", __func__, di->relax_voltage, di->voltage);
-
- /*large suspend current*/
- if (sum_sleep_avr_current > 20) {
- sum_sleep_soc = di->dischrg_sum_sleep_capacity * 100 / di->fcc;
- di->real_soc -= sum_sleep_soc;
- DBG("<%s>. resume, sleep_avr_current is Over 20mA, sleep_soc = %lu, updated real_soc = %d\n",
- __func__, sum_sleep_soc, di->real_soc);
-
- /* small suspend current*/
- } else if ((sum_sleep_avr_current >= 0) && (sum_sleep_avr_current <= 20)) {
-
- relax_voltage = get_relax_voltage(di);
- di->voltage = rk_battery_voltage(di);
-
- if ((sleep_min >= 30) && (relax_voltage > di->voltage)) { /* sleep_min >= 30, update by relax voltage*/
- DBG("<%s>, resume, sleep_min > 30 min\n", __func__);
- relax_volt_update_remain_capacity(di, relax_voltage, sleep_sec);
+ /* check down overflow */
+ if (di->sm_chrg_dsoc < di->dsoc * 1000) {
+ DBG("<%s>. chrg_dsoc down overflow\n", __func__);
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ }
- } else {
- DBG("<%s>, resume, sleep_min < 30 min\n", __func__);
- if (sum_sleep_soc > 0)
- di->real_soc -= sum_sleep_soc;
- }
- }
+ /* check new dsoc */
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc) {
+ di->dsoc = tmp_soc;
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ }
+out:
+ DBG("<%s>.dsoc=%d, rsoc=%d, dsoc: sm_dischrg=%d, sm_chrg=%d, zero=%d\n",
+ __func__, di->dsoc, di->rsoc, di->sm_dischrg_dsoc, di->sm_chrg_dsoc,
+ di->zero_dsoc);
+}
+
+static void rk818_bat_smooth_algorithm(struct rk818_battery *di)
+{
+ int ydsoc = 0, delta_cap = 0, old_cap = 0;
+ unsigned long tgt_sec = 0;
+
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+
+ /* full charge: slow down */
+ if ((di->dsoc == 99) && (di->chrg_status == CC_OR_CV)) {
+ di->sm_linek = FULL_CHRG_K;
+ /* terminal charge, slow down */
+ } else if ((di->current_avg >= TERM_CHRG_CURR) &&
+ (di->chrg_status == CC_OR_CV) && (di->dsoc >= TERM_CHRG_DSOC)) {
+ di->sm_linek = TERM_CHRG_K;
+ DBG("<%s>. terminal mode..\n", __func__);
+ /* simulate charge, speed up */
+ } else if ((di->current_avg <= SIMULATE_CHRG_CURR) &&
+ (di->current_avg > 0) && (di->chrg_status == CC_OR_CV) &&
+ (di->dsoc < TERM_CHRG_DSOC) &&
+ ((di->rsoc - di->dsoc) >= SIMULATE_CHRG_INTV)) {
+ di->sm_linek = SIMULATE_CHRG_K;
+ DBG("<%s>. simulate mode..\n", __func__);
+ } else {
+ /* charge and discharge switch */
+ if ((di->sm_linek * di->current_avg <= 0) ||
+ (di->sm_linek == TERM_CHRG_K) ||
+ (di->sm_linek == FULL_CHRG_K) ||
+ (di->sm_linek == SIMULATE_CHRG_K)) {
+ DBG("<%s>. linek mode, retinit sm linek..\n", __func__);
+ rk818_bat_calc_sm_linek(di);
+ }
+ }
- if ((sum_sleep_soc > 0) || (sleep_min >= 30)) { /*Íê³ÉÁËÒ»´ÎrelaxУ׼*/
- di->dischrg_sum_sleep_capacity = 0;
- di->dischrg_sum_sleep_sec = 0;
- }
- DBG("<%s>--------- resume DISCHARGE end\n", __func__);
- DBG("<%s>. dischrg_sum_sleep_capacity = %lu, dischrg_sum_sleep_sec = %lu\n", __func__, di->dischrg_sum_sleep_capacity, di->dischrg_sum_sleep_sec);
+ old_cap = di->sm_remain_cap;
+ /*
+ * when dsoc equal rsoc(not include full, term, simulate case),
+ * sm_linek should change to -1000/1000 smoothly to avoid dsoc+1/-1
+ * right away, so change it after flat seconds
+ */
+ if ((di->dsoc == di->rsoc) && (abs(di->sm_linek) != 1000) &&
+ (di->sm_linek != FULL_CHRG_K && di->sm_linek != TERM_CHRG_K &&
+ di->sm_linek != SIMULATE_CHRG_K)) {
+ if (!di->flat_match_sec)
+ di->flat_match_sec = get_boot_sec();
+ tgt_sec = di->fcc * 3600 / 100 / abs(di->current_avg) / 3;
+ if (base2sec(di->flat_match_sec) >= tgt_sec) {
+ di->flat_match_sec = 0;
+ di->sm_linek = (di->current_avg >= 0) ? 1000 : -1000;
+ }
+ DBG("<%s>. flat_sec=%ld, tgt_sec=%ld, sm_k=%d\n", __func__,
+ base2sec(di->flat_match_sec), tgt_sec, di->sm_linek);
+ } else {
+ di->flat_match_sec = 0;
+ }
+
+ /* abs(k)=1000 or dsoc=100, stop calc */
+ if ((abs(di->sm_linek) == 1000) || (di->current_avg >= 0 &&
+ di->chrg_status == CC_OR_CV && di->dsoc >= 100)) {
+ DBG("<%s>. sm_linek=%d\n", __func__, di->sm_linek);
+ if (abs(di->sm_linek) == 1000) {
+ di->dsoc = di->rsoc;
+ di->sm_linek = (di->sm_linek > 0) ? 1000 : -1000;
+ DBG("<%s>. dsoc == rsoc, sm_linek=%d\n",
+ __func__, di->sm_linek);
}
+ di->sm_remain_cap = di->remain_cap;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ DBG("<%s>. sm_dischrg_dsoc=%d, sm_chrg_dsoc=%d\n",
+ __func__, di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
+ } else {
+ delta_cap = di->remain_cap - di->sm_remain_cap;
+ if (delta_cap == 0) {
+ DBG("<%s>. delta_cap = 0\n", __func__);
+ return;
+ }
+ ydsoc = di->sm_linek * abs(delta_cap) * 100 / DIV(di->fcc);
+ if (ydsoc == 0) {
+ DBG("<%s>. ydsoc = 0\n", __func__);
+ return;
+ }
+ di->sm_remain_cap = di->remain_cap;
- else if (di->sleep_status == POWER_SUPPLY_STATUS_CHARGING) {
- DBG("<%s>, resume, POWER_SUPPLY_STATUS_CHARGING\n", __func__);
- if ((di->suspend_charge_current >= 0) || (get_charge_status(di) == CHARGE_FINISH)) {
- di->temp_soc = _get_soc(di);
- charge_status = get_charge_status(di);
-
- DBG("<%s>, resume, ac-online = %d, usb-online = %d, sleep_current=%d\n", __func__, di->ac_online, di->usb_online, di->suspend_charge_current);
- if (((di->suspend_charge_current < 800) && (di->ac_online == 1)) || (charge_status == CHARGE_FINISH)) {
- DBG("resume, sleep : ac online charge current < 1000\n");
- if (sleep_sec > 0) {
- di->count_sleep_time += sleep_sec;
- sleep_soc = 1000*di->count_sleep_time*100/3600/di->fcc;
- DBG("<%s>, resume, sleep_soc=%lu, real_soc=%d\n", __func__, sleep_soc, di->real_soc);
- if (sleep_soc > 0)
- di->count_sleep_time = 0;
- di->real_soc += sleep_soc;
- if (di->real_soc > 100)
- di->real_soc = 100;
- }
- } else {
+ DBG("<%s>. k=%d, ydsoc=%d; cap:old=%d, new:%d; delta_cap=%d\n",
+ __func__, di->sm_linek, ydsoc, old_cap,
+ di->sm_remain_cap, delta_cap);
- DBG("<%s>, usb charging\n", __func__);
- if (di->suspend_temp_soc + 15 < di->temp_soc)
- di->real_soc += (di->temp_soc - di->suspend_temp_soc)*3/2;
- else
- di->real_soc += (di->temp_soc - di->suspend_temp_soc);
- }
+ /* discharge mode */
+ if (ydsoc < 0) {
+ di->sm_dischrg_dsoc += ydsoc;
+ rk818_bat_calc_smooth_dischrg(di);
+ /* charge mode */
+ } else {
+ di->sm_chrg_dsoc += ydsoc;
+ rk818_bat_calc_smooth_chrg(di);
+ }
- DBG("POWER_SUPPLY_STATUS_CHARGING: di->temp_soc = %d, di->real_soc = %d, sleep_time = %ld\n ", di->temp_soc , di->real_soc, sleep_sec);
- }
+ if (di->s2r) {
+ di->s2r = false;
+ rk818_bat_calc_sm_linek(di);
}
}
}
-#endif
-#ifdef SUPPORT_USB_CHARGE
-static int get_charging_status_type(struct battery_info *di)
+/*
+ * cccv and finish switch all the time will cause dsoc freeze,
+ * if so, do finish chrg, 100ma is less than min finish_ma.
+ */
+static bool rk818_bat_fake_finish_mode(struct rk818_battery *di)
{
- int otg_status = dwc_otg_check_dpdm();
+ if ((di->rsoc == 100) && (rk818_bat_get_chrg_status(di) == CC_OR_CV) &&
+ (abs(di->current_avg) <= 100))
+ return true;
+ else
+ return false;
+}
- if (0 == otg_status) {
- di->usb_online = 0;
- di->ac_online = 1;
- di->check_count = 0;
+static void rk818_bat_display_smooth(struct rk818_battery *di)
+{
+ /* discharge: reinit "zero & smooth" algorithm to avoid handling dsoc */
+ if (di->s2r && !di->sleep_chrg_online) {
+ DBG("s2r: discharge, reset algorithm...\n");
+ di->s2r = false;
+ rk818_bat_zero_algo_prepare(di);
+ rk818_bat_smooth_algo_prepare(di);
+ return;
+ }
- } else if (1 == otg_status) {
- if (0 == get_gadget_connect_flag()) {
- if (++di->check_count >= 5) {
- di->ac_online = 1;
- di->usb_online = 0;
+ if (di->work_mode == MODE_FINISH) {
+ DBG("step1: charge finish...\n");
+ rk818_bat_finish_algorithm(di);
+ if ((rk818_bat_get_chrg_status(di) != CHARGE_FINISH) &&
+ !rk818_bat_fake_finish_mode(di)) {
+ if ((di->current_avg < 0) &&
+ (di->voltage_avg < di->pdata->zero_algorithm_vol)) {
+ DBG("step1: change to zero mode...\n");
+ rk818_bat_zero_algo_prepare(di);
+ di->work_mode = MODE_ZERO;
} else {
- di->ac_online = 0;
- di->usb_online = 1;
+ DBG("step1: change to smooth mode...\n");
+ rk818_bat_smooth_algo_prepare(di);
+ di->work_mode = MODE_SMOOTH;
}
- } else {
- di->ac_online = 0;
- di->usb_online = 1;
}
-
- } else if (2 == otg_status) {
- di->ac_online = 1;
- di->usb_online = 0;
- di->check_count = 0;
+ } else if (di->work_mode == MODE_ZERO) {
+ DBG("step2: zero algorithm...\n");
+ rk818_bat_zero_algorithm(di);
+ if ((di->voltage_avg >= di->pdata->zero_algorithm_vol + 50) ||
+ (di->current_avg >= 0)) {
+ DBG("step2: change to smooth mode...\n");
+ rk818_bat_smooth_algo_prepare(di);
+ di->work_mode = MODE_SMOOTH;
+ } else if ((rk818_bat_get_chrg_status(di) == CHARGE_FINISH) ||
+ rk818_bat_fake_finish_mode(di)) {
+ DBG("step2: change to finish mode...\n");
+ rk818_bat_finish_algo_prepare(di);
+ di->work_mode = MODE_FINISH;
+ }
+ } else {
+ DBG("step3: smooth algorithm...\n");
+ rk818_bat_smooth_algorithm(di);
+ if ((di->current_avg < 0) &&
+ (di->voltage_avg < di->pdata->zero_algorithm_vol)) {
+ DBG("step3: change to zero mode...\n");
+ rk818_bat_zero_algo_prepare(di);
+ di->work_mode = MODE_ZERO;
+ } else if ((rk818_bat_get_chrg_status(di) == CHARGE_FINISH) ||
+ rk818_bat_fake_finish_mode(di)) {
+ DBG("step3: change to finish mode...\n");
+ rk818_bat_finish_algo_prepare(di);
+ di->work_mode = MODE_FINISH;
+ }
}
-
- if (di->ac_online == 1)
- set_charge_current(di, di->chg_i_lmt);
- else
- set_charge_current(di, ILIM_450MA);
- return otg_status;
}
-#endif
-
-static void battery_poweron_status_init(struct battery_info *di)
+static void rk818_bat_relax_vol_calib(struct rk818_battery *di)
{
- int otg_status;
-
-#ifndef SUPPORT_USB_CHARGE
- u8 buf;
-#endif
-
-#ifdef SUPPORT_USB_CHARGE
-
- otg_status = dwc_otg_check_dpdm();
- if (otg_status == 1) {
- di->usb_online = 1;
- di->ac_online = 0;
- set_charge_current(di, ILIM_450MA);
- di->status = POWER_SUPPLY_STATUS_CHARGING;
- DBG("++++++++ILIM_450MA++++++\n");
-
- } else if (otg_status == 2) {
- di->usb_online = 0;
- di->ac_online = 1;
- di->status = POWER_SUPPLY_STATUS_CHARGING;
- set_charge_current(di, di->chg_i_lmt);
- DBG("++++++++ILIM_1000MA++++++\n");
- }
- DBG(" CHARGE: SUPPORT_USB_CHARGE. charge_status = %d\n", otg_status);
-
-#else
+ int soc, cap, vol;
- battery_read(di->rk818, VB_MOD_REG, &buf, 1);
- if (buf&PLUG_IN_STS) {
- di->ac_online = 1;
- di->usb_online = 0;
- di->status = POWER_SUPPLY_STATUS_CHARGING;
- if (di->real_soc == 100)
- di->status = POWER_SUPPLY_STATUS_FULL;
- } else {
- di->status = POWER_SUPPLY_STATUS_DISCHARGING;
- di->ac_online = 0;
- di->usb_online = 0;
- }
- DBG(" CHARGE: NOT SUPPORT_USB_CHARGE\n");
-#endif
+ vol = di->voltage_relax;
+ soc = rk818_bat_vol_to_ocvsoc(di, vol);
+ cap = rk818_bat_vol_to_ocvcap(di, vol);
+ rk818_bat_init_capacity(di, cap);
+ BAT_INFO("sleep ocv calib: rsoc=%d, cap=%d\n", soc, cap);
}
-
-static void check_battery_status(struct battery_info *di)
+static void rk818_bat_relife_age_flag(struct rk818_battery *di)
{
- u8 buf;
- int ret;
+ u8 ocv_soc, ocv_cap, soc_level;
- ret = battery_read(di->rk818, VB_MOD_REG, &buf, 1);
-#ifdef SUPPORT_USB_CHARGE
+ if (di->voltage_relax <= 0)
+ return;
- if (strstr(saved_command_line, "charger")) {
- if ((buf&PLUG_IN_STS) == 0) {
- di->status = POWER_SUPPLY_STATUS_DISCHARGING;
- di->ac_online = 0;
- di->usb_online = 0;
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, di->voltage_relax);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, di->voltage_relax);
+ DBG("<%s>. ocv_soc=%d, min=%lu, vol=%d\n", __func__,
+ ocv_soc, di->sleep_dischrg_sec / 60, di->voltage_relax);
+
+ /* sleep enough time and ocv_soc enough low */
+ if (!di->age_allow_update && ocv_soc <= 10) {
+ di->age_voltage = di->voltage_relax;
+ di->age_ocv_cap = ocv_cap;
+ di->age_ocv_soc = ocv_soc;
+ di->age_adjust_cap = 0;
+
+ if (ocv_soc <= 1)
+ di->age_level = 100;
+ else if (ocv_soc < 5)
+ di->age_level = 90;
+ else
+ di->age_level = 80;
+
+ soc_level = rk818_bat_get_age_level(di);
+ if (soc_level > di->age_level) {
+ di->age_allow_update = false;
+ } else {
+ di->age_allow_update = true;
+ di->age_keep_sec = get_boot_sec();
}
- } else {
- if (buf&PLUG_IN_STS) {
- get_charging_status_type(di);
+ BAT_INFO("resume: age_vol:%d, age_ocv_cap:%d, age_ocv_soc:%d, "
+ "soc_level:%d, age_allow_update:%d, "
+ "age_level:%d\n",
+ di->age_voltage, di->age_ocv_cap, ocv_soc, soc_level,
+ di->age_allow_update, di->age_level);
+ }
+}
+
+static int rk818_bat_sleep_dischrg(struct rk818_battery *di)
+{
+ bool ocv_soc_updated = false;
+ int tgt_dsoc, gap_soc, sleep_soc = 0;
+ int pwroff_vol = di->pdata->pwroff_vol;
+ unsigned long sleep_sec = di->sleep_dischrg_sec;
+
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d, rv=%d, v=%d, sleep_min=%lu\n",
+ __func__, di->dsoc, di->rsoc, di->voltage_relax,
+ di->voltage_avg, sleep_sec / 60);
+
+ if (di->voltage_relax >= di->voltage_avg) {
+ rk818_bat_relax_vol_calib(di);
+ rk818_bat_restart_relax(di);
+ rk818_bat_relife_age_flag(di);
+ ocv_soc_updated = true;
+ }
+
+ /* handle dsoc */
+ if (di->dsoc <= di->rsoc) {
+ di->sleep_sum_cap = (SLP_CURR_MIN * sleep_sec / 3600);
+ sleep_soc = di->sleep_sum_cap * 100 / di->fcc;
+ tgt_dsoc = di->dsoc - sleep_soc;
+ if (sleep_soc > 0) {
+ BAT_INFO("calib0: rl=%d, dl=%d, intval=%d\n",
+ di->rsoc, di->dsoc, sleep_soc);
+ if (di->dsoc < 5) {
+ di->dsoc--;
+ } else if ((tgt_dsoc < 5) && (di->dsoc >= 5)) {
+ if (di->dsoc == 5)
+ di->dsoc--;
+ else
+ di->dsoc = 5;
+ } else if (tgt_dsoc > 5) {
+ di->dsoc = tgt_dsoc;
+ }
+ }
- di->status = POWER_SUPPLY_STATUS_CHARGING;
- if (di->real_soc == 100)
- di->status = POWER_SUPPLY_STATUS_FULL;
+ DBG("%s: dsoc<=rsoc, sum_cap=%d==>sleep_soc=%d, tgt_dsoc=%d\n",
+ __func__, di->sleep_sum_cap, sleep_soc, tgt_dsoc);
+ } else {
+ /* di->dsoc > di->rsoc */
+ di->sleep_sum_cap = (SLP_CURR_MAX * sleep_sec / 3600);
+ sleep_soc = di->sleep_sum_cap / (di->fcc / 100);
+ gap_soc = di->dsoc - di->rsoc;
+
+ BAT_INFO("calib1: rsoc=%d, dsoc=%d, intval=%d\n",
+ di->rsoc, di->dsoc, sleep_soc);
+ if (gap_soc > sleep_soc) {
+ if ((gap_soc - 5) > (sleep_soc * 2))
+ di->dsoc -= (sleep_soc * 2);
+ else
+ di->dsoc -= sleep_soc;
} else {
- di->status = POWER_SUPPLY_STATUS_DISCHARGING;
- di->ac_online = 0;
- di->usb_online = 0;
+ di->dsoc = di->rsoc;
}
+
+ DBG("%s: dsoc>rsoc, sum_cap=%d=>sleep_soc=%d, gap_soc=%d\n",
+ __func__, di->sleep_sum_cap, sleep_soc, gap_soc);
}
-#else
- if (buf & PLUG_IN_STS) {
- di->ac_online = 1;
- di->usb_online = 0;
- di->status = POWER_SUPPLY_STATUS_CHARGING;
- if (di->real_soc == 100)
- di->status = POWER_SUPPLY_STATUS_FULL;
- } else {
- di->status = POWER_SUPPLY_STATUS_DISCHARGING;
- di->ac_online = 0;
- di->usb_online = 0;
+ if (di->voltage_avg <= pwroff_vol - 70) {
+ di->dsoc = 0;
+ BAT_INFO("low power sleeping, shutdown... %d\n", di->dsoc);
}
-#endif
-}
-static void last_check_report(struct battery_info *di)
-{
-/* high load: current < 0 with charger in.
- * System will not shutdown when dsoc=0% with charging state(ac_online),
- * which will cause over discharge, so oppose status.
- */
- static u32 time;
-
- if ((di->real_soc == 0) && (di->status == POWER_SUPPLY_STATUS_CHARGING)
- && di->current_avg < 0){
- if (get_seconds() - time > 60){
- di->status = POWER_SUPPLY_STATUS_DISCHARGING;
- di->ac_online = 0;
- di->usb_online = 0;
- }
- DBG("dsoc=0, time=%ld\n", get_seconds() - time);
- DBG("status=%d, ac_online=%d, usb_online=%d\n",
- di->status, di->ac_online, di->usb_online);
+ if (ocv_soc_updated && sleep_soc && (di->rsoc - di->dsoc) < 5 &&
+ di->dsoc < 40) {
+ di->dsoc--;
+ BAT_INFO("low power sleeping, reserved... %d\n", di->dsoc);
+ }
- } else
- time = get_seconds();
+ if (di->dsoc <= 0) {
+ di->dsoc = 0;
+ BAT_INFO("sleep dsoc is %d...\n", di->dsoc);
+ }
+
+ DBG("<%s>. out: dsoc=%d, rsoc=%d, sum_cap=%d\n",
+ __func__, di->dsoc, di->rsoc, di->sleep_sum_cap);
+
+ return sleep_soc;
}
-static void report_power_supply_changed(struct battery_info *di)
+static void rk818_bat_power_supply_changed(struct rk818_battery *di)
{
- static u32 old_soc;
- static u32 old_ac_status;
- static u32 old_usb_status;
- static u32 old_charge_status;
- bool state_changed;
+ static int old_soc = -1;
- state_changed = false;
- if (di->real_soc == 0)
- state_changed = true;
- else if (di->real_soc == 100)
- state_changed = true;
- else if (di->real_soc != old_soc)
- state_changed = true;
- else if (di->ac_online != old_ac_status)
- state_changed = true;
- else if (di->usb_online != old_usb_status)
- state_changed = true;
- else if (old_charge_status != di->status)
- state_changed = true;
+ if (di->dsoc > 100)
+ di->dsoc = 100;
+ else if (di->dsoc < 0)
+ di->dsoc = 0;
- if (state_changed) {
- power_supply_changed(&di->bat);
- power_supply_changed(&di->usb);
- power_supply_changed(&di->ac);
- old_soc = di->real_soc;
- old_ac_status = di->ac_online;
- old_usb_status = di->usb_online;
- old_charge_status = di->status;
- }
+ if (di->dsoc == old_soc)
+ return;
+
+ old_soc = di->dsoc;
+ di->last_dsoc = di->dsoc;
+ power_supply_changed(di->bat);
+ BAT_INFO("changed: dsoc=%d, rsoc=%d, v=%d, c=%d, cap=%d\n",
+ di->dsoc, di->rsoc, di->voltage_avg, di->current_avg,
+ di->remain_cap);
}
-static void upd_time_table(struct battery_info *di)
+static u8 rk818_bat_check_reboot(struct rk818_battery *di)
{
- u8 i;
- static int old_index = 0;
- static int old_min = 0;
- u32 time;
- int mod = di->real_soc % 10;
- int index = di->real_soc / 10;
-
- if (di->ac_online || di->usb_online)
- time = di->charge_min;
- else
- time = di->discharge_min;
+ u8 cnt;
- if ((mod == 0) && (index > 0) && (old_index != index)) {
- di->chrg_min[index-1] = time - old_min;
- old_min = time;
- old_index = index;
+ cnt = rk818_bat_read(di, RK818_REBOOT_CNT_REG);
+ cnt++;
+
+ if (cnt >= REBOOT_MAX_CNT) {
+ BAT_INFO("reboot: %d --> %d\n", di->dsoc, di->rsoc);
+ di->dsoc = di->rsoc;
+ if (di->dsoc > 100)
+ di->dsoc = 100;
+ else if (di->dsoc < 0)
+ di->dsoc = 0;
+ rk818_bat_save_dsoc(di, di->dsoc);
+ cnt = REBOOT_MAX_CNT;
}
- for (i=1; i<11; i++)
- DBG("Time[%d]=%d, ", (i*10), di->chrg_min[i-1]);
- DBG("\n");
+ rk818_bat_save_reboot_cnt(di, cnt);
+ DBG("reboot cnt: %d\n", cnt);
+ return cnt;
}
-static void update_battery_info(struct battery_info *di)
+static void rk818_bat_rsoc_daemon(struct rk818_battery *di)
{
- di->remain_capacity = _get_realtime_capacity(di);
- if (di->remain_capacity > di->fcc)
- _capacity_init(di, di->fcc);
-
- if (di->real_soc > 100)
- di->real_soc = 100;
- else if (di->real_soc < 0)
- di->real_soc = 0;
+ int est_vol;
+ static unsigned long sec;
- if ((di->ac_online) || (di->usb_online)) {/*charging*/
- di->charging_time++;
- di->discharging_time = 0;
+ if ((di->remain_cap < 0) && (di->fb_blank != 0)) {
+ sec = get_boot_sec();
+ wake_lock_timeout(&di->wake_lock,
+ (di->pdata->monitor_sec + 1) * HZ);
+ if (base2sec(sec) >= 60) {
+ sec = 0;
+ di->dbg_cap_low0++;
+ est_vol = di->voltage_avg -
+ (di->bat_res * di->current_avg) / 1000;
+ di->remain_cap = rk818_bat_vol_to_ocvcap(di, est_vol);
+ di->rsoc = rk818_bat_vol_to_ocvsoc(di, est_vol);
+ rk818_bat_init_capacity(di, di->remain_cap);
+ BAT_INFO("adjust cap below 0 --> %d, rsoc=%d\n",
+ di->remain_cap, di->rsoc);
+ wake_unlock(&di->wake_lock);
+ }
} else {
- di->charging_time = 0;
- if (di->voltage < 3800)
- di->discharging_time += 2;
- else
- di->discharging_time++;
+ sec = 0;
}
- if (di->charge_status == CHARGE_FINISH)
- di->finish_time++;
- else
- di->finish_time = 0;
-
- di->charge_min = get_charging_time(di);
- di->discharge_min = get_discharging_time(di);
- di->finish_min = get_finish_time(di);
-
- di->work_on = 1;
- di->est_ocv_vol = estimate_bat_ocv_vol(di);
- di->est_ocv_soc = estimate_bat_ocv_soc(di);
- di->voltage = rk_battery_voltage(di);
- di->current_avg = _get_average_current(di);
- di->remain_capacity = _get_realtime_capacity(di);
- di->voltage_ocv = _get_OCV_voltage(di);
- di->charge_status = get_charge_status(di);
- di->otg_status = dwc_otg_check_dpdm();
- di->relax_voltage = get_relax_voltage(di);
- di->temp_soc = _get_soc(di);
- check_battery_status(di);/* ac_online, usb_online, status*/
- update_cal_offset(di);
- upd_time_table(di);
}
-static void rk_battery_work(struct work_struct *work)
+static void rk818_bat_update_info(struct rk818_battery *di)
{
- struct battery_info *di = container_of(work,
- struct battery_info, battery_monitor_work.work);
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->voltage_relax = rk818_bat_get_relax_voltage(di);
+ di->rsoc = rk818_bat_get_rsoc(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->chrg_status = rk818_bat_get_chrg_status(di);
- update_resume_status_relax_voltage(di);
- wait_charge_finish_signal(di);
- charge_finish_routine(di);
+ /* smooth charge */
+ if (di->remain_cap > di->fcc) {
+ di->sm_remain_cap -= (di->remain_cap - di->fcc);
+ DBG("<%s>. cap: remain=%d, sm_remain=%d\n",
+ __func__, di->remain_cap, di->sm_remain_cap);
+ rk818_bat_init_coulomb_cap(di, di->fcc);
+ }
+
+ if (di->chrg_status != CHARGE_FINISH)
+ di->finish_base = get_boot_sec();
- rk_battery_display_smooth(di);
- update_battery_info(di);
- rsoc_realtime_calib(di);
- last_check_report(di);
- report_power_supply_changed(di);
- _copy_soc(di, di->real_soc);
- _save_remain_capacity(di, di->remain_capacity);
+ /*
+ * we need update fcc in continuous charging state, if discharge state
+ * keep at least 2 hour, we decide not to update fcc, so clear the
+ * fcc update flag: age_allow_update.
+ */
+ if (base2min(di->plug_out_base) > 120)
+ di->age_allow_update = false;
- dump_debug_info(di);
- di->queue_work_cnt++;
- queue_delayed_work(di->wq, &di->battery_monitor_work, msecs_to_jiffies(TIMER_MS_COUNTS));
+ /* do adc calib: status must from cccv mode to finish mode */
+ if (di->chrg_status == CC_OR_CV)
+ di->adc_allow_update = true;
}
-static void rk_battery_charge_check_work(struct work_struct *work)
+/* get ntc resistance */
+static int rk818_bat_get_ntc_res(struct rk818_battery *di)
{
- struct battery_info *di = container_of(work,
- struct battery_info, charge_check_work.work);
+ int val = 0;
- DBG("rk_battery_charge_check_work\n");
- charge_disable_open_otg(di->charge_otg);
-}
+ val |= rk818_bat_read(di, RK818_TS1_ADC_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_TS1_ADC_REGH) << 8;
-static BLOCKING_NOTIFIER_HEAD(battery_chain_head);
+ val = val * NTC_CALC_FACTOR; /*reference voltage 2.2V,current 80ua*/
+ DBG("<%s>. ntc_res=%d\n", __func__, val);
-int register_battery_notifier(struct notifier_block *nb)
-{
- return blocking_notifier_chain_register(&battery_chain_head, nb);
+ return val;
}
-EXPORT_SYMBOL_GPL(register_battery_notifier);
-int unregister_battery_notifier(struct notifier_block *nb)
+static void rk818_bat_update_temperature(struct rk818_battery *di)
{
- return blocking_notifier_chain_unregister(&battery_chain_head, nb);
-}
-EXPORT_SYMBOL_GPL(unregister_battery_notifier);
+ u32 ntc_size, *ntc_table;
+ int i, res;
-int battery_notifier_call_chain(unsigned long val)
-{
- return (blocking_notifier_call_chain(&battery_chain_head, val, NULL)
- == NOTIFY_BAD) ? -EINVAL : 0;
-}
-EXPORT_SYMBOL_GPL(battery_notifier_call_chain);
+ ntc_table = di->pdata->ntc_table;
+ ntc_size = di->pdata->ntc_size;
+ di->temperature = VIRTUAL_TEMPERATURE;
-static void poweron_lowerpoer_handle(struct battery_info *di)
-{
-#ifdef CONFIG_LOGO_LOWERPOWER_WARNING
- if ((di->real_soc <= 2) && (di->status == POWER_SUPPLY_STATUS_DISCHARGING)) {
- mdelay(1500);
- /* kernel_power_off(); */
+ if (ntc_size) {
+ res = rk818_bat_get_ntc_res(di);
+ if (res < ntc_table[ntc_size - 1]) {
+ BAT_INFO("bat ntc upper max degree: R=%d\n", res);
+ } else if (res > ntc_table[0]) {
+ BAT_INFO("bat ntc lower min degree: R=%d\n", res);
+ } else {
+ for (i = 0; i < ntc_size; i++) {
+ if (res >= ntc_table[i])
+ break;
+ }
+ di->temperature = (i + di->pdata->ntc_degree_from) * 10;
+ }
}
-#endif
}
-static int battery_notifier_call(struct notifier_block *nb,
- unsigned long event, void *data)
+static void rk818_bat_init_dsoc_algorithm(struct rk818_battery *di)
{
- struct battery_info *di =
- container_of(nb, struct battery_info, battery_nb);
-
- switch (event) {
- case 0:
- DBG(" CHARGE enable\n");
- di->charge_otg = 0;
- queue_delayed_work(di->wq, &di->charge_check_work, msecs_to_jiffies(50));
- break;
-
- case 1:
- di->charge_otg = 1;
- queue_delayed_work(di->wq, &di->charge_check_work, msecs_to_jiffies(50));
- DBG("charge disable OTG enable\n");
- break;
+ u8 buf;
+ int16_t rest = 0;
+ unsigned long soc_sec;
+ const char *mode_name[] = { "MODE_ZERO", "MODE_FINISH",
+ "MODE_SMOOTH_CHRG", "MODE_SMOOTH_DISCHRG", "MODE_SMOOTH", };
+
+ /* get rest */
+ rest |= rk818_bat_read(di, RK818_CALC_REST_REGH) << 8;
+ rest |= rk818_bat_read(di, RK818_CALC_REST_REGL) << 0;
+
+ /* get mode */
+ buf = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ di->algo_rest_mode = (buf & ALGO_REST_MODE_MSK) >> ALGO_REST_MODE_SHIFT;
+
+ if (rk818_bat_get_chrg_status(di) == CHARGE_FINISH) {
+ if (di->algo_rest_mode == MODE_FINISH) {
+ soc_sec = di->fcc * 3600 / 100 / FINISH_CHRG_CUR;
+ if ((rest / soc_sec) > 0) {
+ if (di->dsoc < 100) {
+ di->dsoc++;
+ di->algo_rest_val = rest % soc_sec;
+ BAT_INFO("algorithm rest(%d) dsoc "
+ "inc: %d\n",
+ rest, di->dsoc);
+ } else {
+ di->algo_rest_val = 0;
+ }
+ } else {
+ di->algo_rest_val = rest;
+ }
+ } else {
+ di->algo_rest_val = rest;
+ }
+ } else {
+ /* charge speed up */
+ if ((rest / 1000) > 0 && rk818_bat_chrg_online(di)) {
+ if (di->dsoc < di->rsoc) {
+ di->dsoc++;
+ di->algo_rest_val = rest % 1000;
+ BAT_INFO("algorithm rest(%d) dsoc inc: %d\n",
+ rest, di->dsoc);
+ } else {
+ di->algo_rest_val = 0;
+ }
+ /* discharge speed up */
+ } else if (((rest / 1000) < 0) && !rk818_bat_chrg_online(di)) {
+ if (di->dsoc > di->rsoc) {
+ di->dsoc--;
+ di->algo_rest_val = rest % 1000;
+ BAT_INFO("algorithm rest(%d) dsoc sub: %d\n",
+ rest, di->dsoc);
+ } else {
+ di->algo_rest_val = 0;
+ }
+ } else {
+ di->algo_rest_val = rest;
+ }
+ }
- case 2:
- poweron_lowerpoer_handle(di);
- break;
+ if (di->dsoc >= 100)
+ di->dsoc = 100;
+ else if (di->dsoc <= 0)
+ di->dsoc = 0;
+
+ /* init current mode */
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ if (rk818_bat_get_chrg_status(di) == CHARGE_FINISH) {
+ rk818_bat_finish_algo_prepare(di);
+ di->work_mode = MODE_FINISH;
+ } else if ((di->current_avg < 0) &&
+ (di->voltage_avg < di->pdata->zero_algorithm_vol)) {
+ rk818_bat_zero_algo_prepare(di);
+ di->work_mode = MODE_ZERO;
+ } else {
+ rk818_bat_smooth_algo_prepare(di);
+ di->work_mode = MODE_SMOOTH;
+ }
+
+ DBG("<%s>. init: org_rest=%d, rest=%d, mode=%s; "
+ "doc(x1000): zero=%d, chrg=%d, dischrg=%d, finish=%lu\n",
+ __func__, rest, di->algo_rest_val, mode_name[di->algo_rest_mode],
+ di->zero_dsoc, di->sm_chrg_dsoc, di->sm_dischrg_dsoc,
+ di->finish_base);
+}
+
+static void rk818_bat_save_algo_rest(struct rk818_battery *di)
+{
+ u8 buf, mode;
+ int16_t algo_rest = 0;
+ int tmp_soc;
+ int zero_rest = 0, sm_chrg_rest = 0;
+ int sm_dischrg_rest = 0, finish_rest = 0;
+ const char *mode_name[] = { "MODE_ZERO", "MODE_FINISH",
+ "MODE_SMOOTH_CHRG", "MODE_SMOOTH_DISCHRG", "MODE_SMOOTH", };
+
+ /* zero dischrg */
+ tmp_soc = (di->zero_dsoc) / 1000;
+ if (tmp_soc == di->dsoc)
+ zero_rest = di->zero_dsoc - ((di->dsoc + 1) * 1000 -
+ MIN_ACCURACY);
+
+ /* sm chrg */
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ sm_chrg_rest = di->sm_chrg_dsoc - di->dsoc * 1000;
+
+ /* sm dischrg */
+ tmp_soc = (di->sm_dischrg_dsoc) / 1000;
+ if (tmp_soc == di->dsoc)
+ sm_dischrg_rest = di->sm_dischrg_dsoc - ((di->dsoc + 1) * 1000 -
+ MIN_ACCURACY);
+
+ /* last time is also finish chrg, then add last rest */
+ if (di->algo_rest_mode == MODE_FINISH && di->algo_rest_val)
+ finish_rest = base2sec(di->finish_base) + di->algo_rest_val;
+ else
+ finish_rest = base2sec(di->finish_base);
+
+ /* total calc */
+ if ((rk818_bat_chrg_online(di) && (di->dsoc > di->rsoc)) ||
+ (!rk818_bat_chrg_online(di) && (di->dsoc < di->rsoc)) ||
+ (di->dsoc == di->rsoc)) {
+ di->algo_rest_val = 0;
+ algo_rest = 0;
+ DBG("<%s>. step1..\n", __func__);
+ } else if (di->work_mode == MODE_FINISH) {
+ algo_rest = finish_rest;
+ DBG("<%s>. step2..\n", __func__);
+ } else if (di->algo_rest_mode == MODE_FINISH) {
+ algo_rest = zero_rest + sm_dischrg_rest + sm_chrg_rest;
+ DBG("<%s>. step3..\n", __func__);
+ } else {
+ if (rk818_bat_chrg_online(di) && (di->dsoc < di->rsoc))
+ algo_rest = sm_chrg_rest + di->algo_rest_val;
+ else if (!rk818_bat_chrg_online(di) && (di->dsoc > di->rsoc))
+ algo_rest = zero_rest + sm_dischrg_rest +
+ di->algo_rest_val;
+ else
+ algo_rest = zero_rest + sm_dischrg_rest + sm_chrg_rest +
+ di->algo_rest_val;
+ DBG("<%s>. step4..\n", __func__);
+ }
- default:
- return NOTIFY_OK;
+ /* check mode */
+ if ((di->work_mode == MODE_FINISH) || (di->work_mode == MODE_ZERO)) {
+ mode = di->work_mode;
+ } else {/* MODE_SMOOTH */
+ if (di->sm_linek > 0)
+ mode = MODE_SMOOTH_CHRG;
+ else
+ mode = MODE_SMOOTH_DISCHRG;
}
- return NOTIFY_OK;
-}
-static irqreturn_t rk818_vbat_lo_irq(int irq, void *di)
-{
- pr_info("<%s>lower power warning!\n", __func__);
+ /* save mode */
+ buf = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ buf &= ~ALGO_REST_MODE_MSK;
+ buf |= (mode << ALGO_REST_MODE_SHIFT);
+ rk818_bat_write(di, RK818_MISC_MARK_REG, buf);
- _copy_soc(g_battery, 0);
- _capacity_init(g_battery, 0);
- rk_send_wakeup_key();
- kernel_power_off();
- return IRQ_HANDLED;
-}
+ /* save rest */
+ buf = (algo_rest >> 8) & 0xff;
+ rk818_bat_write(di, RK818_CALC_REST_REGH, buf);
+ buf = (algo_rest >> 0) & 0xff;
+ rk818_bat_write(di, RK818_CALC_REST_REGL, buf);
-static void disable_vbat_low_irq(struct battery_info *di)
-{
- /* mask vbat low */
- rk818_set_bits(di->rk818, 0x4d, (0x1 << 1), (0x1 << 1));
- /*clr vbat low interrupt */
- /* rk818_set_bits(di->rk818, 0x4c, (0x1 << 1), (0x1 << 1));*/
-}
-static void enable_vbat_low_irq(struct battery_info *di)
-{
- /* clr vbat low interrupt */
- rk818_set_bits(di->rk818, 0x4c, (0x1 << 1), (0x1 << 1));
- /* mask vbat low */
- rk818_set_bits(di->rk818, 0x4d, (0x1 << 1), (0x0 << 1));
+ DBG("<%s>. rest: algo=%d, mode=%s, last_rest=%d; zero=%d, "
+ "chrg=%d, dischrg=%d, finish=%lu\n",
+ __func__, algo_rest, mode_name[mode], di->algo_rest_val, zero_rest,
+ sm_chrg_rest, sm_dischrg_rest, base2sec(di->finish_base));
}
-static irqreturn_t rk818_vbat_plug_in(int irq, void *di)
+static void rk818_bat_save_data(struct rk818_battery *di)
{
- pr_info("\n------- %s:irq = %d\n", __func__, irq);
- rk_send_wakeup_key();
- return IRQ_HANDLED;
+ rk818_bat_save_dsoc(di, di->dsoc);
+ rk818_bat_save_cap(di, di->remain_cap);
+ rk818_bat_save_algo_rest(di);
}
-static irqreturn_t rk818_vbat_plug_out(int irq, void *di)
+
+static void rk818_battery_work(struct work_struct *work)
{
- pr_info("\n-------- %s:irq = %d\n", __func__, irq);
- charge_disable_open_otg(0);
- rk_send_wakeup_key();
- return IRQ_HANDLED;
+ struct rk818_battery *di =
+ container_of(work, struct rk818_battery, bat_delay_work.work);
+
+ rk818_bat_update_info(di);
+ rk818_bat_wait_finish_sig(di);
+ rk818_bat_rsoc_daemon(di);
+ rk818_bat_update_temperature(di);
+ rk818_bat_display_smooth(di);
+ rk818_bat_power_supply_changed(di);
+ rk818_bat_save_data(di);
+ rk818_bat_debug_info(di);
+
+ queue_delayed_work(di->bat_monitor_wq, &di->bat_delay_work,
+ msecs_to_jiffies(di->monitor_ms));
}
-static irqreturn_t rk818_vbat_charge_ok(int irq, void *di)
+static irqreturn_t rk818_vb_low_irq(int irq, void *bat)
{
- pr_info("---------- %s:irq = %d\n", __func__, irq);
+ struct rk818_battery *di = (struct rk818_battery *)bat;
+
+ di->dsoc = 0;
rk_send_wakeup_key();
+ BAT_INFO("lower power yet, power off system! v=%d, c=%d, dsoc=%d\n",
+ di->voltage_avg, di->current_avg, di->dsoc);
+
return IRQ_HANDLED;
}
+static void rk818_bat_init_sysfs(struct rk818_battery *di)
+{
+ int i, ret;
+ for (i = 0; i < ARRAY_SIZE(rk818_bat_attr); i++) {
+ ret = sysfs_create_file(&di->dev->kobj,
+ &rk818_bat_attr[i].attr);
+ if (ret)
+ dev_err(di->dev, "create bat node(%s) error\n",
+ rk818_bat_attr[i].attr.name);
+ }
+}
-static int rk818_battery_sysfs_init(struct battery_info *di, struct device *dev)
+static int rk818_bat_init_irqs(struct rk818_battery *di)
{
- int ret;
- int i;
- struct kobject *rk818_fg_kobj;
+ struct rk808 *rk818 = di->rk818;
+ struct platform_device *pdev = di->pdev;
+ int ret, vb_lo_irq;
- ret = create_sysfs_interfaces(dev);
- if (ret < 0) {
- ret = -EINVAL;
- dev_err(dev, "device RK818 battery sysfs register failed\n");
- goto err_sysfs;
+ vb_lo_irq = regmap_irq_get_virq(rk818->irq_data, RK818_IRQ_VB_LO);
+ if (vb_lo_irq < 0) {
+ dev_err(di->dev, "vb_lo_irq request failed!\n");
+ return vb_lo_irq;
}
- rk818_fg_kobj = kobject_create_and_add("rk818_battery", NULL);
- if (!rk818_fg_kobj)
- return -ENOMEM;
- for (i = 0; i < ARRAY_SIZE(rk818_bat_attr); i++) {
- ret = sysfs_create_file(rk818_fg_kobj, &rk818_bat_attr[i].attr);
- if (ret != 0) {
- dev_err(dev, "create rk818_battery node error\n");
- goto err_sysfs;
- }
+ ret = devm_request_threaded_irq(di->dev, vb_lo_irq, NULL,
+ rk818_vb_low_irq, IRQF_TRIGGER_HIGH,
+ "rk818_vb_low", di);
+ if (ret) {
+ dev_err(&pdev->dev, "vb_lo_irq request failed!\n");
+ return ret;
}
+ enable_irq_wake(vb_lo_irq);
- return ret;
-
-err_sysfs:
- power_supply_unregister(&di->ac);
- power_supply_unregister(&di->usb);
- power_supply_unregister(&di->bat);
-
- return ret;
+ return 0;
}
-static void rk818_battery_irq_init(struct battery_info *di)
+static void rk818_bat_init_info(struct rk818_battery *di)
{
- int plug_in_irq, plug_out_irq, chg_ok_irq, vb_lo_irq;
- int ret;
- struct rk818 *chip = di->rk818;
+ di->design_cap = di->pdata->design_capacity;
+ di->qmax = di->pdata->design_qmax;
+ di->bat_res = di->pdata->bat_res;
+ di->monitor_ms = di->pdata->monitor_sec * TIMER_MS_COUNTS;
+ di->boot_base = POWER_ON_SEC_BASE;
+ di->res_div = (di->pdata->sample_res == SAMPLE_RES_20MR) ?
+ SAMPLE_RES_DIV1 : SAMPLE_RES_DIV2;
+}
- vb_lo_irq = irq_create_mapping(chip->irq_domain, RK818_IRQ_VB_LO);
- plug_in_irq = irq_create_mapping(chip->irq_domain, RK818_IRQ_PLUG_IN);
- plug_out_irq = irq_create_mapping(chip->irq_domain, RK818_IRQ_PLUG_OUT);
- chg_ok_irq = irq_create_mapping(chip->irq_domain, RK818_IRQ_CHG_OK);
+static int rk818_bat_rtc_sleep_sec(struct rk818_battery *di)
+{
+ int err;
+ int interval_sec = 0;
+ struct rtc_time tm;
+ struct timespec tv = { .tv_nsec = NSEC_PER_SEC >> 1, };
+ struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
- ret = request_threaded_irq(vb_lo_irq, NULL, rk818_vbat_lo_irq,
- IRQF_TRIGGER_HIGH, "rk818_vbatlow", chip);
- if (ret != 0)
- dev_err(chip->dev, "vb_lo_irq request failed!\n");
+ err = rtc_read_time(rtc, &tm);
+ if (err) {
+ dev_err(rtc->dev.parent, "hctosys: read hardware clk failed\n");
+ return 0;
+ }
- di->irq = vb_lo_irq;
- enable_irq_wake(di->irq);
- disable_vbat_low_irq(di);
+ err = rtc_valid_tm(&tm);
+ if (err) {
+ dev_err(rtc->dev.parent, "hctosys: invalid date time\n");
+ return 0;
+ }
- ret = request_threaded_irq(plug_in_irq, NULL, rk818_vbat_plug_in,
- IRQF_TRIGGER_RISING, "rk818_vbat_plug_in", chip);
- if (ret != 0)
- dev_err(chip->dev, "plug_in_irq request failed!\n");
+ rtc_tm_to_time(&tm, &tv.tv_sec);
+ interval_sec = tv.tv_sec - di->rtc_base.tv_sec;
+ return (interval_sec > 0) ? interval_sec : 0;
+}
- ret = request_threaded_irq(plug_out_irq, NULL, rk818_vbat_plug_out,
- IRQF_TRIGGER_FALLING, "rk818_vbat_plug_out", chip);
- if (ret != 0)
- dev_err(chip->dev, "plug_out_irq request failed!\n");
+static void rk818_bat_init_ts1_detect(struct rk818_battery *di)
+{
+ u8 buf;
+ if (!di->pdata->ntc_size)
+ return;
- ret = request_threaded_irq(chg_ok_irq, NULL, rk818_vbat_charge_ok,
- IRQF_TRIGGER_RISING, "rk818_vbat_charge_ok", chip);
- if (ret != 0)
- dev_err(chip->dev, "chg_ok_irq request failed!\n");
+ /* ADC_TS1_EN */
+ buf = rk818_bat_read(di, RK818_ADC_CTRL_REG);
+ buf |= ADC_TS1_EN;
+ rk818_bat_write(di, RK818_ADC_CTRL_REG, buf);
}
-static void battery_info_init(struct battery_info *di, struct rk818 *chip)
+static void rk818_bat_set_shtd_vol(struct rk818_battery *di)
{
- int fcc_capacity;
- u8 i;
- di->rk818 = chip;
- g_battery = di;
- di->platform_data = chip->battery_data;
- di->cell.config = di->platform_data->cell_cfg;
- di->design_capacity = di->platform_data->cell_cfg->design_capacity;
- di->qmax = di->platform_data->cell_cfg->design_qmax;
- di->fcc = di->design_capacity;
- di->vol_smooth_time = 0;
- di->charge_smooth_time = 0;
- di->charge_smooth_status = false;
- di->sleep_status = 0;
- di->work_on = 0;
- di->sys_wakeup = true;
- di->pcb_ioffset = 0;
- di->pcb_ioffset_updated = false;
- di->queue_work_cnt = 0;
- di->update_k = 0;
- di->voltage_old = 0;
- di->display_soc = 0;
- di->bat_res = 0;
- di->bat_res_updated = false;
- di->resume = false;
- di->sys_wakeup = true;
- di->status = POWER_SUPPLY_STATUS_DISCHARGING;
- di->finish_min = 0;
- di->charge_min = 0;
- di->discharge_min = 0;
- di->charging_time = 0;
- di->discharging_time = 0;
- di->finish_time = 0;
- di->q_dead = 0;
- di->q_err = 0;
- di->q_shtd = 0;
- di->odd_capacity = 0;
- di->bat_res = di->rk818->battery_data->sense_resistor_mohm;
- di->term_chg_cnt = 0;
- di->emu_chg_cnt = 0;
-
- for (i=0; i<10; i++)
- di->chrg_min[i] = -1;
-
- di->debug_finish_real_soc = 0;
- di->debug_finish_temp_soc = 0;
-
- fcc_capacity = _get_FCC_capacity(di);
- if (fcc_capacity > 1000)
- di->fcc = fcc_capacity;
- else
- di->fcc = di->design_capacity;
+ u8 val;
+
+ /* set vbat lowest 3.0v shutdown */
+ val = rk818_bat_read(di, RK818_VB_MON_REG);
+ val &= ~(VBAT_LOW_VOL_MASK | VBAT_LOW_ACT_MASK);
+ val |= (RK818_VBAT_LOW_3V0 | EN_VABT_LOW_SHUT_DOWN);
+ rk818_bat_write(di, RK818_VB_MON_REG, val);
+
+ /* disable low irq */
+ rk818_bat_set_bits(di, RK818_INT_STS_MSK_REG1,
+ VB_LOW_INT_EN, VB_LOW_INT_EN);
+}
+
+static void rk818_bat_init_fg(struct rk818_battery *di)
+{
+ rk818_bat_enable_gauge(di);
+ rk818_bat_init_voltage_kb(di);
+ rk818_bat_init_coffset(di);
+ rk818_bat_set_relax_sample(di);
+ rk818_bat_set_ioffset_sample(di);
+ rk818_bat_set_ocv_sample(di);
+ rk818_bat_init_ts1_detect(di);
+ rk818_bat_init_rsoc(di);
+ rk818_bat_init_coulomb_cap(di, di->nac);
+ rk818_bat_init_age_algorithm(di);
+ rk818_bat_init_chrg_config(di);
+ rk818_bat_set_shtd_vol(di);
+ rk818_bat_init_zero_table(di);
+ rk818_bat_init_caltimer(di);
+ rk818_bat_init_dsoc_algorithm(di);
+
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->voltage_ocv = rk818_bat_get_ocv_voltage(di);
+ di->voltage_relax = rk818_bat_get_relax_voltage(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->dbg_pwr_dsoc = di->dsoc;
+ di->dbg_pwr_rsoc = di->rsoc;
+ di->dbg_pwr_vol = di->voltage_avg;
+
+ rk818_bat_dump_regs(di, 0x99, 0xee);
+ DBG("nac=%d cap=%d ov=%d v=%d rv=%d dl=%d rl=%d c=%d\n",
+ di->nac, di->remain_cap, di->voltage_ocv, di->voltage_avg,
+ di->voltage_relax, di->dsoc, di->rsoc, di->current_avg);
}
-/*
-static struct of_device_id rk818_battery_of_match[] = {
-{ .compatible = "rk818_battery" },
-{ }
-};
-MODULE_DEVICE_TABLE(of, rk818_battery_of_match);
-*/
#ifdef CONFIG_OF
-static int rk_battery_parse_dt(struct rk818 *rk818, struct device *dev)
+static int rk818_bat_parse_dt(struct rk818_battery *di)
{
- struct device_node *regs, *rk818_pmic_np;
- struct battery_platform_data *data;
- struct cell_config *cell_cfg;
- struct ocv_config *ocv_cfg;
- struct property *prop;
u32 out_value;
int length, ret;
+ size_t size;
+ struct device_node *np = di->dev->of_node;
+ struct battery_platform_data *pdata;
+ struct device *dev = di->dev;
- rk818_pmic_np = of_node_get(rk818->dev->of_node);
- if (!rk818_pmic_np) {
- dev_err(dev, "could not find pmic sub-node\n");
- return -EINVAL;
- }
-
- regs = of_find_node_by_name(rk818_pmic_np, "battery");
- if (!regs) {
- dev_err(dev, "battery node not found!\n");
- return -EINVAL;
- }
-
- data = devm_kzalloc(rk818->dev, sizeof(*data), GFP_KERNEL);
- if (!data) {
- dev_err(dev, "kzalloc for battery_platform_data failed!\n");
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
return -ENOMEM;
- }
- cell_cfg = devm_kzalloc(rk818->dev, sizeof(*cell_cfg), GFP_KERNEL);
- if (!cell_cfg) {
- dev_err(dev, "kzalloc for cell_config failed!\n");
- return -ENOMEM;
- }
- ocv_cfg = devm_kzalloc(rk818->dev, sizeof(*ocv_cfg), GFP_KERNEL);
- if (!ocv_cfg) {
- dev_err(dev, "kzalloc for ocv_config failed!\n");
- return -ENOMEM;
- }
-
- prop = of_find_property(regs, "ocv_table", &length);
- if (!prop) {
+ di->pdata = pdata;
+ /* init default param */
+ pdata->bat_res = DEFAULT_BAT_RES;
+ pdata->monitor_sec = DEFAULT_MONITOR_SEC;
+ pdata->pwroff_vol = DEFAULT_PWROFF_VOL_THRESD;
+ pdata->sleep_exit_current = DEFAULT_SLP_EXIT_CUR;
+ pdata->sleep_enter_current = DEFAULT_SLP_ENTER_CUR;
+ pdata->bat_mode = MODE_BATTARY;
+ pdata->max_soc_offset = DEFAULT_MAX_SOC_OFFSET;
+ pdata->sample_res = DEFAULT_SAMPLE_RES;
+ pdata->energy_mode = DEFAULT_ENERGY_MODE;
+ pdata->fb_temp = DEFAULT_FB_TEMP;
+
+ /* parse necessary param */
+ if (!of_find_property(np, "ocv_table", &length)) {
dev_err(dev, "ocv_table not found!\n");
return -EINVAL;
}
- data->ocv_size = length / sizeof(u32);
-
- if (data->ocv_size > 0) {
- size_t size = sizeof(*data->battery_ocv) * data->ocv_size;
- data->battery_ocv = devm_kzalloc(rk818->dev, size, GFP_KERNEL);
- if (!data->battery_ocv) {
- dev_err(dev, "kzalloc for ocv_table failed!\n");
- return -ENOMEM;
- }
- ret = of_property_read_u32_array(regs, "ocv_table", data->battery_ocv, data->ocv_size);
- if (ret < 0)
- return ret;
- }
-
- ret = of_property_read_u32(regs, "max_charge_currentmA", &out_value);
- if (ret < 0) {
- dev_err(dev, "max_charge_currentmA not found!\n");
- out_value = DEFAULT_ICUR;
- }
- data->max_charger_currentmA = out_value;
-
- ret = of_property_read_u32(regs, "max_charge_ilimitmA", &out_value);
- if (ret < 0) {
- dev_err(dev, "max_charger_ilimitmA not found!\n");
- out_value = DEFAULT_ILMT;
+ pdata->ocv_size = length / sizeof(u32);
+ if (pdata->ocv_size <= 0) {
+ dev_err(dev, "invalid ocv table\n");
+ return -EINVAL;
}
- data->max_charger_ilimitmA = out_value;
- ret = of_property_read_u32(regs, "bat_res", &out_value);
- if (ret < 0) {
- dev_err(dev, "bat_res not found!\n");
- out_value = DEFAULT_BAT_RES;
- }
- data->sense_resistor_mohm = out_value;
+ size = sizeof(*pdata->ocv_table) * pdata->ocv_size;
+ pdata->ocv_table = devm_kzalloc(di->dev, size, GFP_KERNEL);
+ if (!pdata->ocv_table)
+ return -ENOMEM;
- ret = of_property_read_u32(regs, "max_charge_voltagemV", &out_value);
- if (ret < 0) {
- dev_err(dev, "max_charge_voltagemV not found!\n");
- out_value = DEFAULT_VLMT;
- }
- data->max_charger_voltagemV = out_value;
+ ret = of_property_read_u32_array(np, "ocv_table",
+ pdata->ocv_table,
+ pdata->ocv_size);
+ if (ret < 0)
+ return ret;
- ret = of_property_read_u32(regs, "design_capacity", &out_value);
+ ret = of_property_read_u32(np, "design_capacity", &out_value);
if (ret < 0) {
dev_err(dev, "design_capacity not found!\n");
return ret;
}
- cell_cfg->design_capacity = out_value;
+ pdata->design_capacity = out_value;
- ret = of_property_read_u32(regs, "design_qmax", &out_value);
+ ret = of_property_read_u32(np, "design_qmax", &out_value);
if (ret < 0) {
dev_err(dev, "design_qmax not found!\n");
return ret;
}
- cell_cfg->design_qmax = out_value;
-
- ret = of_property_read_u32(regs, "sleep_enter_current", &out_value);
+ pdata->design_qmax = out_value;
+ ret = of_property_read_u32(np, "max_chrg_voltage", &out_value);
if (ret < 0) {
- dev_err(dev, "sleep_enter_current not found!\n");
+ dev_err(dev, "max_chrg_voltage missing!\n");
return ret;
}
- ocv_cfg->sleep_enter_current = out_value;
+ pdata->max_chrg_voltage = out_value;
+ if (out_value >= 4300)
+ pdata->zero_algorithm_vol = DEFAULT_ALGR_VOL_THRESD2;
+ else
+ pdata->zero_algorithm_vol = DEFAULT_ALGR_VOL_THRESD1;
+
+ ret = of_property_read_u32(np, "fb_temperature", &pdata->fb_temp);
+ if (ret < 0)
+ dev_err(dev, "fb_temperature missing!\n");
+
+ ret = of_property_read_u32(np, "sample_res", &pdata->sample_res);
+ if (ret < 0)
+ dev_err(dev, "sample_res missing!\n");
+
+ ret = of_property_read_u32(np, "energy_mode", &pdata->energy_mode);
+ if (ret < 0)
+ dev_err(dev, "energy_mode missing!\n");
+
+ ret = of_property_read_u32(np, "max_soc_offset",
+ &pdata->max_soc_offset);
+ if (ret < 0)
+ dev_err(dev, "max_soc_offset missing!\n");
+
+ ret = of_property_read_u32(np, "monitor_sec", &pdata->monitor_sec);
+ if (ret < 0)
+ dev_err(dev, "monitor_sec missing!\n");
+
+ ret = of_property_read_u32(np, "zero_algorithm_vol",
+ &pdata->zero_algorithm_vol);
+ if (ret < 0)
+ dev_err(dev, "zero_algorithm_vol missing!\n");
+
+ ret = of_property_read_u32(np, "virtual_power", &pdata->bat_mode);
+ if (ret < 0)
+ dev_err(dev, "virtual_power missing!\n");
+
+ ret = of_property_read_u32(np, "bat_res", &pdata->bat_res);
+ if (ret < 0)
+ dev_err(dev, "bat_res missing!\n");
+
+ ret = of_property_read_u32(np, "sleep_enter_current",
+ &pdata->sleep_enter_current);
+ if (ret < 0)
+ dev_err(dev, "sleep_enter_current missing!\n");
+
+ ret = of_property_read_u32(np, "sleep_exit_current",
+ &pdata->sleep_exit_current);
+ if (ret < 0)
+ dev_err(dev, "sleep_exit_current missing!\n");
+
+ ret = of_property_read_u32(np, "power_off_thresd", &pdata->pwroff_vol);
+ if (ret < 0)
+ dev_err(dev, "power_off_thresd missing!\n");
+
+ if (!of_find_property(np, "ntc_table", &length)) {
+ pdata->ntc_size = 0;
+ } else {
+ /* get ntc degree base value */
+ ret = of_property_read_u32_index(np, "ntc_degree_from", 1,
+ &pdata->ntc_degree_from);
+ if (ret) {
+ dev_err(dev, "invalid ntc_degree_from\n");
+ return -EINVAL;
+ }
+
+ of_property_read_u32_index(np, "ntc_degree_from", 0,
+ &out_value);
+ if (out_value)
+ pdata->ntc_degree_from = -pdata->ntc_degree_from;
+
+ pdata->ntc_size = length / sizeof(u32);
+ }
- ret = of_property_read_u32(regs, "sleep_exit_current", &out_value);
- if (ret < 0) {
- dev_err(dev, "sleep_exit_current not found!\n");
- return ret;
+ if (pdata->ntc_size) {
+ size = sizeof(*pdata->ntc_table) * pdata->ntc_size;
+ pdata->ntc_table = devm_kzalloc(di->dev, size, GFP_KERNEL);
+ if (!pdata->ntc_table)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(np, "ntc_table",
+ pdata->ntc_table,
+ pdata->ntc_size);
+ if (ret < 0)
+ return ret;
}
- ocv_cfg->sleep_exit_current = out_value;
-
- ret = of_property_read_u32(regs, "support_uboot_chrg", &support_uboot_chrg);
-
- cell_cfg->ocv = ocv_cfg;
- data->cell_cfg = cell_cfg;
- rk818->battery_data = data;
-
- DBG("\n--------- the battery OCV TABLE dump:\n");
- DBG("bat_res :%d\n", data->sense_resistor_mohm);
- DBG("max_charge_ilimitmA :%d\n", data->max_charger_ilimitmA);
- DBG("max_charge_currentmA :%d\n", data->max_charger_currentmA);
- DBG("max_charge_voltagemV :%d\n", data->max_charger_voltagemV);
- DBG("design_capacity :%d\n", cell_cfg->design_capacity);
- DBG("design_qmax :%d\n", cell_cfg->design_qmax);
- DBG("sleep_enter_current :%d\n", cell_cfg->ocv->sleep_enter_current);
- DBG("sleep_exit_current :%d\n", cell_cfg->ocv->sleep_exit_current);
- DBG("uboot chrg = %d\n", support_uboot_chrg);
- DBG("\n--------- rk818_battery dt_parse ok.\n");
+
+ DBG("the battery dts info dump:\n"
+ "bat_res:%d\n"
+ "design_capacity:%d\n"
+ "design_qmax :%d\n"
+ "sleep_enter_current:%d\n"
+ "sleep_exit_current:%d\n"
+ "zero_algorithm_vol:%d\n"
+ "monitor_sec:%d\n"
+ "max_soc_offset:%d\n"
+ "virtual_power:%d\n"
+ "pwroff_vol:%d\n"
+ "sample_res:%d\n"
+ "ntc_size=%d\n"
+ "ntc_degree_from:%d\n"
+ "ntc_degree_to:%d\n",
+ pdata->bat_res, pdata->design_capacity, pdata->design_qmax,
+ pdata->sleep_enter_current, pdata->sleep_exit_current,
+ pdata->zero_algorithm_vol, pdata->monitor_sec,
+ pdata->max_soc_offset, pdata->bat_mode, pdata->pwroff_vol,
+ pdata->sample_res, pdata->ntc_size, pdata->ntc_degree_from,
+ pdata->ntc_degree_from + pdata->ntc_size - 1
+ );
+
return 0;
}
-
#else
-static int rk_battery_parse_dt(struct rk818 *rk818, struct device *dev)
+static int rk818_bat_parse_dt(struct rk818_battery *di)
{
return -ENODEV;
}
#endif
+static const struct of_device_id rk818_battery_of_match[] = {
+ {.compatible = "rk818-battery",},
+ { },
+};
-static int battery_probe(struct platform_device *pdev)
+static int rk818_battery_probe(struct platform_device *pdev)
{
- struct rk818 *chip = dev_get_drvdata(pdev->dev.parent);
- struct battery_info *di;
+ const struct of_device_id *of_id =
+ of_match_device(rk818_battery_of_match, &pdev->dev);
+ struct rk818_battery *di;
+ struct rk808 *rk818 = dev_get_drvdata(pdev->dev.parent);
int ret;
- DBG("battery driver version %s\n", DRIVER_VERSION);
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di) {
- dev_err(&pdev->dev, "kzalloc battery_info memory failed!\n");
- return -ENOMEM;
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to find matching dt id\n");
+ return -ENODEV;
}
- ret = rk_battery_parse_dt(chip, &pdev->dev);
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ di->rk818 = rk818;
+ di->pdev = pdev;
+ di->dev = &pdev->dev;
+ di->regmap = rk818->regmap;
+ platform_set_drvdata(pdev, di);
+
+ ret = rk818_bat_parse_dt(di);
if (ret < 0) {
- dev_err(&pdev->dev, "rk_battery_parse_dt failed!\n");
- return -EINVAL;
+ dev_err(di->dev, "rk818 battery parse dt failed!\n");
+ return ret;
}
- platform_set_drvdata(pdev, di);
- battery_info_init(di, chip);
- if (!is_bat_exist(di)) {
- dev_err(&pdev->dev, "could not find Li-ion battery!\n");
- return -ENODEV;
+ if (!is_rk818_bat_exist(di)) {
+ di->pdata->bat_mode = MODE_VIRTUAL;
+ dev_err(di->dev, "no battery, virtual power mode\n");
}
- fg_init(di);
- wake_lock_init(&di->resume_wake_lock, WAKE_LOCK_SUSPEND, "resume_charging");
+ ret = rk818_bat_init_irqs(di);
+ if (ret != 0) {
+ dev_err(di->dev, "rk818 bat init irqs failed!\n");
+ return ret;
+ }
- flatzone_voltage_init(di);
- battery_poweron_status_init(di);
- battery_power_supply_init(di);
- ret = battery_power_supply_register(di, &pdev->dev);
+ ret = rk818_bat_init_power_supply(di);
if (ret) {
- dev_err(&pdev->dev, "rk power supply register failed!\n");
+ dev_err(di->dev, "rk818 power supply register failed!\n");
return ret;
}
- di->wq = create_singlethread_workqueue("battery-work");
- INIT_DELAYED_WORK(&di->battery_monitor_work, rk_battery_work);
- queue_delayed_work(di->wq, &di->battery_monitor_work, msecs_to_jiffies(TIMER_MS_COUNTS*5));
- INIT_DELAYED_WORK(&di->charge_check_work, rk_battery_charge_check_work);
- di->battery_nb.notifier_call = battery_notifier_call;
- register_battery_notifier(&di->battery_nb);
+ rk818_bat_init_info(di);
+ rk818_bat_init_fg(di);
+ rk818_bat_init_sysfs(di);
+ rk818_bat_register_fb_notify(di);
+ wake_lock_init(&di->wake_lock, WAKE_LOCK_SUSPEND, "rk818_bat_lock");
+ di->bat_monitor_wq = alloc_ordered_workqueue("%s",
+ WQ_MEM_RECLAIM | WQ_FREEZABLE, "rk818-bat-monitor-wq");
+ INIT_DELAYED_WORK(&di->bat_delay_work, rk818_battery_work);
+ queue_delayed_work(di->bat_monitor_wq, &di->bat_delay_work,
+ msecs_to_jiffies(TIMER_MS_COUNTS * 5));
+
+ BAT_INFO("driver version %s\n", DRIVER_VERSION);
- rk818_battery_irq_init(di);
- rk818_battery_sysfs_init(di, &pdev->dev);
- DBG("------ RK81x battery_probe ok!-------\n");
return ret;
}
-
-#ifdef CONFIG_PM
-
-static int battery_suspend(struct platform_device *dev, pm_message_t state)
+static int rk818_battery_suspend(struct platform_device *dev,
+ pm_message_t state)
{
- struct battery_info *di = platform_get_drvdata(dev);
-
- enable_vbat_low_irq(di);
- di->sleep_status = di->status;
- di->suspend_charge_current = _get_average_current(di);
+ struct rk818_battery *di = platform_get_drvdata(dev);
+ u8 val;
- /* avoid abrupt wakeup which will clean the variable*/
- if (di->sys_wakeup) {
- di->suspend_capacity = di->remain_capacity;
- di->suspend_temp_soc = _get_soc(di);
- di->suspend_time_start = get_seconds();
- di->sys_wakeup = false;
+ cancel_delayed_work_sync(&di->bat_delay_work);
+
+ di->s2r = false;
+ di->sleep_chrg_online = rk818_bat_chrg_online(di);
+ di->sleep_chrg_status = rk818_bat_get_chrg_status(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->rsoc = rk818_bat_get_rsoc(di);
+ do_gettimeofday(&di->rtc_base);
+ rk818_bat_save_data(di);
+
+ /* if not CHARGE_FINISH, reinit finish_base.
+ * avoid sleep loop between suspend and resume
+ */
+ if (di->sleep_chrg_status != CHARGE_FINISH)
+ di->finish_base = get_boot_sec();
+
+ /* avoid: enter suspend from MODE_ZERO: load from heavy to light */
+ if ((di->work_mode == MODE_ZERO) &&
+ (di->sleep_chrg_online) && (di->current_avg >= 0)) {
+ DBG("suspend: MODE_ZERO exit...\n");
+ /* it need't do prepare for mode finish and smooth, it will
+ * be done in display_smooth
+ */
+ if (di->sleep_chrg_status == CHARGE_FINISH) {
+ di->work_mode = MODE_FINISH;
+ di->finish_base = get_boot_sec();
+ } else {
+ di->work_mode = MODE_SMOOTH;
+ rk818_bat_smooth_algo_prepare(di);
+ }
}
- cancel_delayed_work(&di->battery_monitor_work);
- DBG("<%s>. suspend_temp_soc,=%d, suspend_charge_current=%d, suspend_cap=%d, sleep_status=%d\n",
- __func__, di->suspend_temp_soc, di->suspend_charge_current,
- di->suspend_capacity, di->sleep_status);
+ /* set vbat low than 3.4v to generate a wakeup irq */
+ val = rk818_bat_read(di, RK818_VB_MON_REG);
+ val &= (~(VBAT_LOW_VOL_MASK | VBAT_LOW_ACT_MASK));
+ val |= (RK818_VBAT_LOW_3V4 | EN_VBAT_LOW_IRQ);
+ rk818_bat_write(di, RK818_VB_MON_REG, val);
+ rk818_bat_set_bits(di, RK818_INT_STS_MSK_REG1, VB_LOW_INT_EN, 0);
+
+ BAT_INFO("suspend: dl=%d rl=%d c=%d v=%d cap=%d at=%ld st=0x%x ch=%d\n",
+ di->dsoc, di->rsoc, di->current_avg,
+ rk818_bat_get_avg_voltage(di), rk818_bat_get_coulomb_cap(di),
+ di->sleep_dischrg_sec, di->sleep_chrg_status,
+ di->sleep_chrg_online);
return 0;
}
-static int battery_resume(struct platform_device *dev)
+static int rk818_battery_resume(struct platform_device *dev)
{
- struct battery_info *di = platform_get_drvdata(dev);
+ struct rk818_battery *di = platform_get_drvdata(dev);
+ int interval_sec, time_step, pwroff_vol;
+ u8 val;
- di->resume = true;
- DBG("<%s>\n", __func__);
- disable_vbat_low_irq(di);
- queue_delayed_work(di->wq, &di->battery_monitor_work,
- msecs_to_jiffies(TIMER_MS_COUNTS/2));
+ di->s2r = true;
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->voltage_relax = rk818_bat_get_relax_voltage(di);
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->rsoc = rk818_bat_get_rsoc(di);
+ interval_sec = rk818_bat_rtc_sleep_sec(di);
+ di->sleep_sum_sec += interval_sec;
+ pwroff_vol = di->pdata->pwroff_vol;
+
+ if (!di->sleep_chrg_online) {
+ /* only add up discharge sleep seconds */
+ di->sleep_dischrg_sec += interval_sec;
+ if (di->voltage_avg <= pwroff_vol + 50)
+ time_step = DISCHRG_TIME_STEP1;
+ else
+ time_step = DISCHRG_TIME_STEP2;
+ }
- if (di->sleep_status == POWER_SUPPLY_STATUS_CHARGING ||
- di->real_soc <= 5)
- wake_lock_timeout(&di->resume_wake_lock, 5*HZ);
+ BAT_INFO("resume: dl=%d rl=%d c=%d v=%d rv=%d "
+ "cap=%d dt=%d at=%ld ch=%d\n",
+ di->dsoc, di->rsoc, di->current_avg, di->voltage_avg,
+ di->voltage_relax, rk818_bat_get_coulomb_cap(di), interval_sec,
+ di->sleep_dischrg_sec, di->sleep_chrg_online);
- return 0;
-}
-static int battery_remove(struct platform_device *dev)
-{
- struct battery_info *di = platform_get_drvdata(dev);
+ /* sleep: enough time and discharge */
+ if ((di->sleep_dischrg_sec > time_step) && (!di->sleep_chrg_online)) {
+ if (rk818_bat_sleep_dischrg(di))
+ di->sleep_dischrg_sec = 0;
+ }
+
+ rk818_bat_save_data(di);
+
+ /* set vbat lowest 3.0v shutdown */
+ val = rk818_bat_read(di, RK818_VB_MON_REG);
+ val &= ~(VBAT_LOW_VOL_MASK | VBAT_LOW_ACT_MASK);
+ val |= (RK818_VBAT_LOW_3V0 | EN_VABT_LOW_SHUT_DOWN);
+ rk818_bat_write(di, RK818_VB_MON_REG, val);
+ rk818_bat_set_bits(di, RK818_INT_STS_MSK_REG1,
+ VB_LOW_INT_EN, VB_LOW_INT_EN);
+
+ /* charge/lowpower lock: for battery work to update dsoc and rsoc */
+ if ((di->sleep_chrg_online) ||
+ (!di->sleep_chrg_online && di->voltage_avg < di->pdata->pwroff_vol))
+ wake_lock_timeout(&di->wake_lock, msecs_to_jiffies(2000));
+
+ queue_delayed_work(di->bat_monitor_wq, &di->bat_delay_work,
+ msecs_to_jiffies(1000));
- cancel_delayed_work_sync(&di->battery_monitor_work);
return 0;
}
-static void battery_shutdown(struct platform_device *dev)
-{
- struct battery_info *di = platform_get_drvdata(dev);
- cancel_delayed_work_sync(&di->battery_monitor_work);
- DBG("rk818 shutdown!");
-}
-#endif
+static void rk818_battery_shutdown(struct platform_device *dev)
+{
+ u8 cnt = 0;
+ struct rk818_battery *di = platform_get_drvdata(dev);
-static struct platform_driver battery_driver = {
- .driver = {
- .name = "rk818-battery",
- .owner = THIS_MODULE,
+ cancel_delayed_work_sync(&di->bat_delay_work);
+ cancel_delayed_work_sync(&di->calib_delay_work);
+ rk818_bat_unregister_fb_notify(di);
+ del_timer(&di->caltimer);
+ if (base2sec(di->boot_base) < REBOOT_PERIOD_SEC)
+ cnt = rk818_bat_check_reboot(di);
+ else
+ rk818_bat_save_reboot_cnt(di, 0);
+
+ BAT_INFO("shutdown: dl=%d rl=%d c=%d v=%d cap=%d f=%d ch=%d n=%d "
+ "mode=%d rest=%d\n",
+ di->dsoc, di->rsoc, di->current_avg, di->voltage_avg,
+ di->remain_cap, di->fcc, rk818_bat_chrg_online(di), cnt,
+ di->algo_rest_mode, di->algo_rest_val);
+}
+
+static struct platform_driver rk818_battery_driver = {
+ .probe = rk818_battery_probe,
+ .suspend = rk818_battery_suspend,
+ .resume = rk818_battery_resume,
+ .shutdown = rk818_battery_shutdown,
+ .driver = {
+ .name = "rk818-battery",
+ .of_match_table = rk818_battery_of_match,
},
-
- .probe = battery_probe,
- .remove = battery_remove,
- .suspend = battery_suspend,
- .resume = battery_resume,
- .shutdown = battery_shutdown,
};
static int __init battery_init(void)
{
- return platform_driver_register(&battery_driver);
+ return platform_driver_register(&rk818_battery_driver);
}
-
fs_initcall_sync(battery_init);
+
static void __exit battery_exit(void)
{
- platform_driver_unregister(&battery_driver);
+ platform_driver_unregister(&rk818_battery_driver);
}
module_exit(battery_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk818-battery");
-MODULE_AUTHOR("ROCKCHIP");
-
+MODULE_AUTHOR("chenjh<chenjh@rock-chips.com>");
projects / firefly-linux-kernel-4.4.55.git / blobdiff