--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2015 - 2016 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/***** temporarily flag *******/
+#define CONFIG_SINGLE_IMG
+/* #define CONFIG_DISABLE_ODM */
+
+/***** temporarily flag *******/
+/*
+ * Public General Config
+ */
+#define AUTOCONF_INCLUDED
+#define DRV_NAME "rtl8822be"
+
+#define CONFIG_PCI_HCI
+#define CONFIG_PCIE_HCI
+#define PLATFORM_LINUX
+
+/*
+ * Wi-Fi Functions Config
+ */
+#define CONFIG_80211N_HT
+#define CONFIG_RECV_REORDERING_CTRL
+#define CONFIG_80211AC_VHT
+#define CONFIG_IEEE80211_BAND_5GHZ
+
+/*#define CONFIG_IOCTL_CFG80211*/
+#ifdef CONFIG_IOCTL_CFG80211
+ /*#define RTW_USE_CFG80211_STA_EVENT*/ /* Indecate new sta asoc through cfg80211_new_sta */
+ #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
+ /*#define CONFIG_DEBUG_CFG80211*/
+ /*#define CONFIG_DRV_ISSUE_PROV_REQ*/ /* IOT FOR S2 */
+ #define CONFIG_SET_SCAN_DENY_TIMER
+#endif
+
+#define TX_AMSDU
+
+/*
+ * Internal General Config
+ */
+/*#define CONFIG_PWRCTRL*/
+/*#define CONFIG_H2CLBK*/
+#define CONFIG_TRX_BD_ARCH /* PCI only */
+#define USING_RX_TAG
+/*#define CONFIG_NAPI*/
+/*#define CONFIG_GRO*/
+#define CONFIG_C2H_PACKET_EN /* necessary for 8822B */
+#define CONFIG_EMBEDDED_FWIMG
+/*#define CONFIG_FILE_FWIMG*/
+
+/*#define CONFIG_XMIT_ACK*/
+#ifdef CONFIG_XMIT_ACK
+ #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
+#endif
+
+/*#define CONFIG_TCP_CSUM_OFFLOAD_RX*/
+
+/*#define CONFIG_DRVEXT_MODULE*/
+
+
+/*#define CONFIG_DISABLE_MCS13TO15 1*/ /* Disable MSC13-15 rates for more stable TX throughput with some 5G APs */
+
+#define BUF_DESC_ARCH /* if defined, hardware follows Rx buffer descriptor architecture */
+
+#define CONFIG_DFS 1
+
+/*#define CONFIG_IPS*/
+#ifdef CONFIG_IPS
+ /*#define CONFIG_IPS_LEVEL_2*/ /* enable this to set default IPS mode to IPS_LEVEL_2 */
+#endif
+/*#define SUPPORT_HW_RFOFF_DETECTED*/
+
+#define CONFIG_HIGH_CHAN_SUPER_CALIBRATION
+#define CONFIG_LPS
+
+#if defined(CONFIG_LPS)
+ /*#define CONFIG_LPS_LCLK*/ /* 32K */
+#endif
+
+
+#ifdef CONFIG_LPS_LCLK
+ #define CONFIG_XMIT_THREAD_MODE
+#endif
+
+/*#define CONFIG_ANTENNA_DIVERSITY*/
+
+/*#define CONFIG_CONCURRENT_MODE*/
+#ifdef CONFIG_CONCURRENT_MODE
+ /*#define CONFIG_HWPORT_SWAP*/ /* Port0->Sec, Port1->Pri */
+ #define CONFIG_RUNTIME_PORT_SWITCH
+ /*#define DBG_RUNTIME_PORT_SWITCH*/
+ #define CONFIG_SCAN_BACKOP
+ /*#define CONFIG_ATMEL_RC_PATCH*/
+ /*#define CONFIG_TSF_RESET_OFFLOAD*/ /* For 2 PORT TSF SYNC. */
+#else /* NAPI doesn't support CONCURRENT mode currently*/
+ #define CONFIG_NAPI
+ #define CONFIG_GRO
+#endif
+
+#define CONFIG_AP_MODE
+#ifdef CONFIG_AP_MODE
+ /*#define CONFIG_INTERRUPT_BASED_TXBCN*/ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
+ #if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
+ #undef CONFIG_INTERRUPT_BASED_TXBCN
+ #endif
+ #ifdef CONFIG_INTERRUPT_BASED_TXBCN
+ /*#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT*/
+ #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
+ #endif
+
+ #define CONFIG_NATIVEAP_MLME
+ #ifndef CONFIG_NATIVEAP_MLME
+ #define CONFIG_HOSTAPD_MLME
+ #endif
+ #define CONFIG_FIND_BEST_CHANNEL
+ /*#define CONFIG_AUTO_AP_MODE*/
+#endif
+
+#define CONFIG_P2P
+#ifdef CONFIG_P2P
+ /* The CONFIG_WFD is for supporting the Wi-Fi display */
+ #define CONFIG_WFD
+
+ #define CONFIG_P2P_REMOVE_GROUP_INFO
+
+ /*#define CONFIG_DBG_P2P*/
+
+ #define CONFIG_P2P_PS
+ /*#define CONFIG_P2P_IPS*/
+ #define CONFIG_P2P_OP_CHK_SOCIAL_CH
+ #define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
+ #define CONFIG_P2P_INVITE_IOT
+#endif
+
+/* Added by Kurt 20110511 */
+#ifdef CONFIG_TDLS
+ #define CONFIG_TDLS_DRIVER_SETUP
+#if 0
+ #ifndef CONFIG_WFD
+ #define CONFIG_WFD
+ #endif
+ #define CONFIG_TDLS_AUTOSETUP
+#endif
+ #define CONFIG_TDLS_AUTOCHECKALIVE
+ #define CONFIG_TDLS_CH_SW /* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */
+#endif
+
+#define CONFIG_SKB_COPY /* for amsdu */
+
+/*#define CONFIG_LED*/
+#ifdef CONFIG_LED
+ /*#define CONFIG_SW_LED*/
+ #ifdef CONFIG_SW_LED
+ /*#define CONFIG_LED_HANDLED_BY_CMD_THREAD*/
+ #endif
+#endif /* CONFIG_LED */
+
+#define CONFIG_GLOBAL_UI_PID
+
+#define CONFIG_LAYER2_ROAMING
+#define CONFIG_LAYER2_ROAMING_RESUME
+/*#define CONFIG_ADAPTOR_INFO_CACHING_FILE*/ /* now just applied on 8192cu only, should make it general...*/
+/*#define CONFIG_RESUME_IN_WORKQUEUE*/
+/*#define CONFIG_SET_SCAN_DENY_TIMER*/
+#define CONFIG_LONG_DELAY_ISSUE
+#define CONFIG_NEW_SIGNAL_STAT_PROCESS
+/*#define CONFIG_SIGNAL_DISPLAY_DBM*/ /* display RX signal with dbm */
+#ifdef CONFIG_SIGNAL_DISPLAY_DBM
+/*#define CONFIG_BACKGROUND_NOISE_MONITOR*/
+#endif
+
+#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
+
+#define CONFIG_TX_MCAST2UNI /* Support IP multicast->unicast*/
+/*#define CONFIG_CHECK_AC_LIFETIME 1*/ /* Check packet lifetime of 4 ACs. */
+
+/*
+ * Software feature Related Config
+ */
+#define RTW_HALMAC /* Use HALMAC architecture, necessary for 8822B */
+/* #define CONFIG_RF4CE_COEXIST */ /* ZigBee coexist support */
+
+/*
+ * Interface Related Config
+ */
+
+/*
+ * HAL Related Config
+ */
+
+#define RTL8192E_RX_PACKET_INCLUDE_CRC 0
+#define CONFIG_RX_PACKET_APPEND_FCS
+#define SUPPORTED_BLOCK_IO
+#define RTL8188E_FW_DOWNLOAD_ENABLE
+
+/*#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0*/
+
+#define CONFIG_OUT_EP_WIFI_MODE 0
+
+#define ENABLE_USB_DROP_INCORRECT_OUT
+
+
+#define DISABLE_BB_RF 0
+
+#ifdef CONFIG_GPIO_WAKEUP
+ #ifndef WAKEUP_GPIO_IDX
+ #define WAKEUP_GPIO_IDX 14
+ #endif
+#endif
+
+/*#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0*/
+
+#ifdef CONFIG_MP_INCLUDED
+ #define MP_DRIVER 1
+ #define CONFIG_MP_IWPRIV_SUPPORT 1
+#else
+ #define MP_DRIVER 0
+#endif
+
+/* Use cmd frame to issue beacon. Use a fixed buffer for beacon. */
+#define CONFIG_BCN_ICF
+
+/*
+ * Platform Related Config
+ */
+
+
+#ifdef CONFIG_BT_COEXIST
+ /* for ODM and outsrc BT-Coex */
+ #ifndef CONFIG_LPS
+ #define CONFIG_LPS /* download reserved page to FW */
+ #endif
+#endif /* !CONFIG_BT_COEXIST */
+
+
+#ifdef CONFIG_USB_TX_AGGREGATION
+/*#define CONFIG_TX_EARLY_MODE*/
+#endif
+
+#ifdef CONFIG_TX_EARLY_MODE
+#define RTL8192E_EARLY_MODE_PKT_NUM_10 0
+#endif
+
+/* Try to handle the Beacon error found in some types of TP-LINK APs */
+#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR
+
+#define CONFIG_80211D
+
+#define CONFIG_BEAMFORMING
+#ifdef CONFIG_BEAMFORMING
+#define BEAMFORMING_SUPPORT 0 /* Use driver self mechanism, not phydm */
+#define RTW_BEAMFORMING_VERSION_2
+#endif /* CONFIG_BEAMFORMING */
+
+/*
+ * Debug Related Config
+ */
+#define DBG 1
+/*#define CONFIG_DEBUG_RTL871X*/ /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */
+
+#define CONFIG_PROC_DEBUG
+
+#define CONFIG_DBG_COUNTER
+
+#define DBG_CONFIG_ERROR_DETECT
+/*
+#define DBG_CONFIG_ERROR_DETECT_INT
+#define DBG_CONFIG_ERROR_RESET
+#define DBG_IO
+#define DBG_DELAY_OS
+#define DBG_MEM_ALLOC
+#define DBG_IOCTL
+
+#define DBG_TX
+#define DBG_XMIT_BUF
+#define DBG_XMIT_BUF_EXT
+#define DBG_TX_DROP_FRAME
+
+#define DBG_RX_DROP_FRAME
+#define DBG_RX_SEQ
+#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
+#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
+*/
+#define DBG_RX_SIGNAL_DISPLAY_RAW_DATA
+#if 0
+#define DBG_NOISE_MONITOR
+
+#define DBG_TX_POWER_IDX
+
+#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
+#define DBG_ROAMING_TEST
+
+#define DBG_HAL_INIT_PROFILING
+
+#define DBG_MEMORY_LEAK 1
+
+/* TX use 1 urb */
+#define CONFIG_SINGLE_XMIT_BUF
+/* RX use 1 urb */
+#define CONFIG_SINGLE_RECV_BUF
+#endif