--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2015 - 2016 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _RTL8822B_HALINIT_C_
+
+#include <drv_types.h> /* PADAPTER, basic_types.h and etc. */
+#include <hal_data.h> /* GET_HAL_SPEC(), HAL_DATA_TYPE */
+#include "../hal_halmac.h" /* HALMAC_SECURITY_CAM_ENTRY_NUM_8822B */
+#include "rtl8822b.h"
+
+
+void rtl8822b_init_hal_spec(PADAPTER adapter)
+{
+ struct hal_spec_t *hal_spec;
+
+
+ hal_spec = GET_HAL_SPEC(adapter);
+
+ hal_spec->macid_num = 128;
+ hal_spec->sec_cam_ent_num = HALMAC_SECURITY_CAM_ENTRY_NUM_8822B;
+ hal_spec->sec_cap = SEC_CAP_CHK_BMC;
+ hal_spec->nss_num = 2;
+ hal_spec->band_cap = BAND_CAP_2G | BAND_CAP_5G;
+ hal_spec->bw_cap = BW_CAP_20M | BW_CAP_40M | BW_CAP_80M;
+ hal_spec->port_num = 5;
+ hal_spec->proto_cap = PROTO_CAP_11B | PROTO_CAP_11G | PROTO_CAP_11N | PROTO_CAP_11AC;
+
+ hal_spec->wl_func = 0
+ | WL_FUNC_P2P
+ | WL_FUNC_MIRACAST
+ | WL_FUNC_TDLS
+ ;
+}
+
+u32 rtl8822b_power_on(PADAPTER adapter)
+{
+ struct dvobj_priv *d;
+ PHAL_DATA_TYPE hal;
+ u8 bMacPwrCtrlOn;
+ int err = 0;
+ u8 ret = _TRUE;
+
+
+ d = adapter_to_dvobj(adapter);
+
+ bMacPwrCtrlOn = _FALSE;
+ rtw_hal_get_hwreg(adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
+ if (bMacPwrCtrlOn == _TRUE)
+ goto out;
+
+ err = rtw_halmac_poweron(d);
+ if (err) {
+ RTW_INFO("%s: Power ON Fail!!\n", __FUNCTION__);
+ ret = _FALSE;
+ goto out;
+ }
+
+ bMacPwrCtrlOn = _TRUE;
+ rtw_hal_set_hwreg(adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
+
+#ifdef CONFIG_BT_COEXIST
+ hal = GET_HAL_DATA(adapter);
+ if (hal->EEPROMBluetoothCoexist)
+ rtw_btcoex_PowerOnSetting(adapter);
+#endif /* CONFIG_BT_COEXIST */
+out:
+ return ret;
+}
+
+void rtl8822b_power_off(PADAPTER adapter)
+{
+ struct dvobj_priv *d;
+ u8 bMacPwrCtrlOn;
+ int err = 0;
+
+
+ d = adapter_to_dvobj(adapter);
+
+ bMacPwrCtrlOn = _FALSE;
+ rtw_hal_get_hwreg(adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
+ if (bMacPwrCtrlOn == _FALSE)
+ goto out;
+
+ err = rtw_halmac_poweroff(d);
+ if (err) {
+ RTW_INFO("%s: Power OFF Fail!!\n", __FUNCTION__);
+ goto out;
+ }
+
+ bMacPwrCtrlOn = _FALSE;
+ rtw_hal_set_hwreg(adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn);
+
+ adapter->bFWReady = _FALSE;
+
+out:
+ return;
+}
+
+#ifdef CONFIG_EMBEDDED_FWIMG
+/* New FW array is TBD. So use phydm FW.
+ * TODO remove extern reference after FW array is defined
+ */
+extern u8 Array_MP_8822B_FW_NIC[];
+extern u32 ArrayLength_MP_8822B_FW_NIC;
+#endif
+
+u8 rtl8822b_hal_init(PADAPTER adapter)
+{
+ struct dvobj_priv *d;
+ PHAL_DATA_TYPE hal;
+ int err;
+
+
+ d = adapter_to_dvobj(adapter);
+ hal = GET_HAL_DATA(adapter);
+
+ adapter->bFWReady = _FALSE;
+ hal->fw_ractrl = _FALSE;
+
+#ifdef CONFIG_EMBEDDED_FWIMG
+ RTW_INFO("%s: Load embedded fw img\n", __FUNCTION__);
+ err = rtw_halmac_init_hal_fw(d, Array_MP_8822B_FW_NIC, ArrayLength_MP_8822B_FW_NIC);
+#else
+ RTW_INFO("%s: Load fw file\n", __FUNCTION__);
+ err = rtw_halmac_init_hal_fw_file(d, REALTEK_CONFIG_PATH "RTL8822Bfw_NIC.bin");
+#endif
+ if (err) {
+ RTW_INFO("%s: fail\n", __FUNCTION__);
+ return _FALSE;
+ }
+
+
+ RTW_INFO("%s: successful, fw_ver=%d fw_subver=%d\n", __FUNCTION__, hal->FirmwareVersion, hal->FirmwareSubVersion);
+
+ /* Sync driver status with hardware setting */
+ rtl8822b_rcr_get(adapter, NULL);
+ adapter->bFWReady = _TRUE;
+ hal->fw_ractrl = _TRUE;
+
+ return _TRUE;
+}
+
+u8 rtl8822b_mac_verify(PADAPTER adapter)
+{
+ struct dvobj_priv *d;
+ int err;
+
+
+ d = adapter_to_dvobj(adapter);
+
+ err = rtw_halmac_self_verify(d);
+ if (err) {
+ RTW_INFO("%s fail\n", __FUNCTION__);
+ return _FALSE;
+ }
+
+ RTW_INFO("%s successful\n", __FUNCTION__);
+ return _TRUE;
+}
+
+void rtl8822b_init_misc(PADAPTER adapter)
+{
+ PHAL_DATA_TYPE hal;
+ u8 v8 = 0;
+ u32 v32 = 0;
+
+
+ hal = GET_HAL_DATA(adapter);
+
+
+ /*
+ * Sync driver status and hardware setting
+ */
+
+ /* initial channel setting */
+ if (IS_A_CUT(hal->VersionID) || IS_B_CUT(hal->VersionID)) {
+ /* for A/B cut use under only 5G */
+ u8 i = 0;
+ struct dvobj_priv *dvobj = adapter_to_dvobj(adapter);
+ PADAPTER iface = NULL;
+
+ RTW_INFO("%s: under only 5G for A/B cut\n", __FUNCTION__);
+ RTW_INFO("%s: not support HT/VHT RX STBC for A/B cut\n", __FUNCTION__);
+
+ for (i = 0; i < dvobj->iface_nums; i++) {
+ iface = dvobj->padapters[i];
+ if (iface) {
+ iface->registrypriv.wireless_mode = WIRELESS_MODE_5G;
+ iface->registrypriv.channel = 149;
+
+ iface->registrypriv.stbc_cap &= ~(BIT0 | BIT4);
+ }
+ }
+ }
+
+ hal->CurrentBandType = BAND_MAX;
+ set_channel_bwmode(adapter, adapter->registrypriv.channel, 0, 0);
+
+ /* initial security setting */
+ invalidate_cam_all(adapter);
+
+ /* check RCR/ICV bit */
+ rtl8822b_rcr_clear(adapter, BIT_ACRC32_8822B | BIT_AICV_8822B);
+
+ /* clear rx ctrl frame */
+ rtw_write16(adapter, REG_RXFLTMAP1_8822B, 0);
+}
+
+u32 rtl8822b_init(PADAPTER adapter)
+{
+ u8 ok = _TRUE;
+ PHAL_DATA_TYPE hal;
+
+ hal = GET_HAL_DATA(adapter);
+
+ ok = rtl8822b_hal_init(adapter);
+ if (_FALSE == ok)
+ return _FAIL;
+
+ rtl8822b_phy_init_haldm(adapter);
+#ifdef CONFIG_BEAMFORMING
+ rtl8822b_phy_init_beamforming(adapter);
+#endif
+
+#ifdef CONFIG_BT_COEXIST
+ /* Init BT hw config. */
+ if (_TRUE == hal->EEPROMBluetoothCoexist)
+ rtw_btcoex_HAL_Initialize(adapter, _FALSE);
+#endif /* CONFIG_BT_COEXIST */
+
+ rtl8822b_init_misc(adapter);
+
+ return _SUCCESS;
+}
+
+u32 rtl8822b_deinit(PADAPTER adapter)
+{
+ struct dvobj_priv *d;
+ PHAL_DATA_TYPE hal;
+ int err;
+
+
+ d = adapter_to_dvobj(adapter);
+ hal = GET_HAL_DATA(adapter);
+
+ adapter->bFWReady = _FALSE;
+ hal->fw_ractrl = _FALSE;
+
+ err = rtw_halmac_deinit_hal(d);
+ if (err)
+ return _FAIL;
+
+ return _SUCCESS;
+}
+
+void rtl8822b_init_default_value(PADAPTER adapter)
+{
+ PHAL_DATA_TYPE hal;
+ u8 i;
+
+
+ hal = GET_HAL_DATA(adapter);
+
+ adapter->registrypriv.wireless_mode = WIRELESS_MODE_24G | WIRELESS_MODE_5G;
+
+ /* init default value */
+ hal->fw_ractrl = _FALSE;
+
+ if (!adapter_to_pwrctl(adapter)->bkeepfwalive)
+ hal->LastHMEBoxNum = 0;
+
+ /* init phydm default value */
+ hal->bIQKInitialized = _FALSE;
+ hal->odmpriv.RFCalibrateInfo.TM_Trigger = 0; /* for IQK */
+ hal->odmpriv.RFCalibrateInfo.ThermalValue_HP_index = 0;
+ for (i = 0; i < HP_THERMAL_NUM; i++)
+ hal->odmpriv.RFCalibrateInfo.ThermalValue_HP[i] = 0;
+
+ /* init Efuse variables */
+ hal->EfuseUsedBytes = 0;
+ hal->EfuseUsedPercentage = 0;
+#ifdef HAL_EFUSE_MEMORY
+ hal->EfuseHal.fakeEfuseBank = 0;
+ hal->EfuseHal.fakeEfuseUsedBytes = 0;
+ _rtw_memset(hal->EfuseHal.fakeEfuseContent, 0xFF, EFUSE_MAX_HW_SIZE);
+ _rtw_memset(hal->EfuseHal.fakeEfuseInitMap, 0xFF, EFUSE_MAX_MAP_LEN);
+ _rtw_memset(hal->EfuseHal.fakeEfuseModifiedMap, 0xFF, EFUSE_MAX_MAP_LEN);
+ hal->EfuseHal.BTEfuseUsedBytes = 0;
+ hal->EfuseHal.BTEfuseUsedPercentage = 0;
+ _rtw_memset(hal->EfuseHal.BTEfuseContent, 0xFF, EFUSE_MAX_BT_BANK * EFUSE_MAX_HW_SIZE);
+ _rtw_memset(hal->EfuseHal.BTEfuseInitMap, 0xFF, EFUSE_BT_MAX_MAP_LEN);
+ _rtw_memset(hal->EfuseHal.BTEfuseModifiedMap, 0xFF, EFUSE_BT_MAX_MAP_LEN);
+ hal->EfuseHal.fakeBTEfuseUsedBytes = 0;
+ _rtw_memset(hal->EfuseHal.fakeBTEfuseContent, 0xFF, EFUSE_MAX_BT_BANK * EFUSE_MAX_HW_SIZE);
+ _rtw_memset(hal->EfuseHal.fakeBTEfuseInitMap, 0xFF, EFUSE_BT_MAX_MAP_LEN);
+ _rtw_memset(hal->EfuseHal.fakeBTEfuseModifiedMap, 0xFF, EFUSE_BT_MAX_MAP_LEN);
+#endif
+}
projects / firefly-linux-kernel-4.4.55.git / blobdiff