*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#define CF8385_MANFID 0x02df
#define CF8385_CARDID 0x8103
-/* FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
+/*
+ * FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
* that gets fixed. Currently there's no way to access it from the probe hook.
*/
static inline u32 get_model(u16 manf_id, u16 card_id)
if (status & IF_CS_BIT_COMMAND)
break;
if (++loops > 100) {
- lbs_pr_err("card not ready for commands\n");
+ netdev_err(priv->dev, "card not ready for commands\n");
goto done;
}
mdelay(1);
/* is hardware ready? */
status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
if ((status & IF_CS_BIT_RESP) == 0) {
- lbs_pr_err("no cmd response in card\n");
+ netdev_err(priv->dev, "no cmd response in card\n");
*len = 0;
goto out;
}
*len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
- lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+ netdev_err(priv->dev,
+ "card cmd buffer has invalid # of bytes (%d)\n",
+ *len);
goto out;
}
len = if_cs_read16(priv->card, IF_CS_READ_LEN);
if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
- lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+ netdev_err(priv->dev,
+ "card data buffer has invalid # of bytes (%d)\n",
+ len);
priv->dev->stats.rx_dropped++;
goto dat_err;
}
if (remain < count)
count = remain;
- /* "write the number of bytes to be sent to the I/O Command
- * write length register" */
+ /*
+ * "write the number of bytes to be sent to the I/O Command
+ * write length register"
+ */
if_cs_write16(card, IF_CS_CMD_LEN, count);
/* "write this to I/O Command port register as 16 bit writes */
&fw->data[sent],
count >> 1);
- /* "Assert the download over interrupt command in the Host
- * status register" */
+ /*
+ * "Assert the download over interrupt command in the Host
+ * status register"
+ */
if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
- /* "Assert the download over interrupt command in the Card
- * interrupt case register" */
+ /*
+ * "Assert the download over interrupt command in the Card
+ * interrupt case register"
+ */
if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
- /* "The host polls the Card Status register ... for 50 ms before
- declaring a failure */
+ /*
+ * "The host polls the Card Status register ... for 50 ms before
+ * declaring a failure"
+ */
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
- lbs_pr_err("can't download helper at 0x%x, ret %d\n",
- sent, ret);
+ pr_err("can't download helper at 0x%x, ret %d\n",
+ sent, ret);
goto done;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
IF_CS_SQ_HELPER_OK);
if (ret < 0) {
- lbs_pr_err("helper firmware doesn't answer\n");
+ pr_err("helper firmware doesn't answer\n");
goto done;
}
len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
if (len & 1) {
retry++;
- lbs_pr_info("odd, need to retry this firmware block\n");
+ pr_info("odd, need to retry this firmware block\n");
} else {
retry = 0;
}
if (retry > 20) {
- lbs_pr_err("could not download firmware\n");
+ pr_err("could not download firmware\n");
ret = -ENODEV;
goto done;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
IF_CS_BIT_COMMAND);
if (ret < 0) {
- lbs_pr_err("can't download firmware at 0x%x\n", sent);
+ pr_err("can't download firmware at 0x%x\n", sent);
goto done;
}
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
if (ret < 0)
- lbs_pr_err("firmware download failed\n");
+ pr_err("firmware download failed\n");
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
ret = if_cs_send_cmd(priv, buf, nb);
break;
default:
- lbs_pr_err("%s: unsupported type %d\n", __func__, type);
+ netdev_err(priv->dev, "%s: unsupported type %d\n",
+ __func__, type);
}
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
if (p_dev->resource[1]->end) {
- lbs_pr_err("wrong CIS (check number of IO windows)\n");
+ pr_err("wrong CIS (check number of IO windows)\n");
return -ENODEV;
}
card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
if (!card) {
- lbs_pr_err("error in kzalloc\n");
+ pr_err("error in kzalloc\n");
goto out;
}
card->p_dev = p_dev;
p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
- lbs_pr_err("error in pcmcia_loop_config\n");
+ pr_err("error in pcmcia_loop_config\n");
goto out1;
}
card->iobase = ioport_map(p_dev->resource[0]->start,
resource_size(p_dev->resource[0]));
if (!card->iobase) {
- lbs_pr_err("error in ioport_map\n");
+ pr_err("error in ioport_map\n");
ret = -EIO;
goto out1;
}
ret = pcmcia_enable_device(p_dev);
if (ret) {
- lbs_pr_err("error in pcmcia_enable_device\n");
+ pr_err("error in pcmcia_enable_device\n");
goto out2;
}
/*
* Most of the libertas cards can do unaligned register access, but some
- * weird ones can not. That's especially true for the CF8305 card.
+ * weird ones cannot. That's especially true for the CF8305 card.
*/
card->align_regs = 0;
card->model = get_model(p_dev->manf_id, p_dev->card_id);
if (card->model == MODEL_UNKNOWN) {
- lbs_pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
- p_dev->manf_id, p_dev->card_id);
+ pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
+ p_dev->manf_id, p_dev->card_id);
goto out2;
}
if (card->model == MODEL_8305) {
card->align_regs = 1;
if (prod_id < IF_CS_CF8305_B1_REV) {
- lbs_pr_err("8305 rev B0 and older are not supported\n");
+ pr_err("8305 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
}
if ((card->model == MODEL_8381) && prod_id < IF_CS_CF8381_B3_REV) {
- lbs_pr_err("8381 rev B2 and older are not supported\n");
+ pr_err("8381 rev B2 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
if ((card->model == MODEL_8385) && prod_id < IF_CS_CF8385_B1_REV) {
- lbs_pr_err("8385 rev B0 and older are not supported\n");
+ pr_err("8385 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
&fw_table[0], &helper, &mainfw);
if (ret) {
- lbs_pr_err("failed to find firmware (%d)\n", ret);
+ pr_err("failed to find firmware (%d)\n", ret);
goto out2;
}
ret = request_irq(p_dev->irq, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (ret) {
- lbs_pr_err("error in request_irq\n");
+ pr_err("error in request_irq\n");
goto out3;
}
- /* Clear any interrupt cause that happened while sending
- * firmware/initializing card */
+ /*
+ * Clear any interrupt cause that happened while sending
+ * firmware/initializing card
+ */
if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
if_cs_enable_ints(card);
/* And finally bring the card up */
if (lbs_start_card(priv) != 0) {
- lbs_pr_err("could not activate card\n");
+ pr_err("could not activate card\n");
goto out3;
}
projects / firefly-linux-kernel-4.4.55.git / blobdiff