iwlwifi: mvm: fix endianity issues with Smart Fifo commands

[firefly-linux-kernel-4.4.55.git] / drivers / net / wireless / iwlwifi / mvm / fw-api.h

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 309a9b9a94fecc26918f967e7b9e7a01374d43b3..9a922f3bd16bc00b7a5ce0e6484178db9372a24d 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -86,6 +86,8 @@ enum {
 
 #define IWL_MVM_STATION_COUNT  16
 
+#define IWL_MVM_TDLS_STA_COUNT 4
+
 /* commands */
 enum {
        MVM_ALIVE = 0x1,
@@ -131,10 +133,12 @@ enum {
        /* Scan offload */
        SCAN_OFFLOAD_REQUEST_CMD = 0x51,
        SCAN_OFFLOAD_ABORT_CMD = 0x52,
+       HOT_SPOT_CMD = 0x53,
        SCAN_OFFLOAD_COMPLETE = 0x6D,
        SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
        SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
        MATCH_FOUND_NOTIFICATION = 0xd9,
+       SCAN_ITERATION_COMPLETE = 0xe7,
 
        /* Phy */
        PHY_CONFIGURATION_CMD = 0x6a,
@@ -163,7 +167,6 @@ enum {
        BEACON_NOTIFICATION = 0x90,
        BEACON_TEMPLATE_CMD = 0x91,
        TX_ANT_CONFIGURATION_CMD = 0x98,
-       BT_CONFIG = 0x9b,
        STATISTICS_NOTIFICATION = 0x9d,
        EOSP_NOTIFICATION = 0x9e,
        REDUCE_TX_POWER_CMD = 0x9f,
@@ -185,6 +188,10 @@ enum {
        BT_COEX_PRIO_TABLE = 0xcc,
        BT_COEX_PROT_ENV = 0xcd,
        BT_PROFILE_NOTIFICATION = 0xce,
+       BT_CONFIG = 0x9b,
+       BT_COEX_UPDATE_SW_BOOST = 0x5a,
+       BT_COEX_UPDATE_CORUN_LUT = 0x5b,
+       BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
        BT_COEX_CI = 0x5d,
 
        REPLY_SF_CFG_CMD = 0xd1,
@@ -534,6 +541,9 @@ enum iwl_time_event_type {
        /* WiDi Sync Events */
        TE_WIDI_TX_SYNC,
 
+       /* Channel Switch NoA */
+       TE_P2P_GO_CSA_NOA,
+
        TE_MAX
 }; /* MAC_EVENT_TYPE_API_E_VER_1 */
 
@@ -901,6 +911,72 @@ struct iwl_phy_context_cmd {
        __le32 dsp_cfg_flags;
 } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
 
+/*
+ * Aux ROC command
+ *
+ * Command requests the firmware to create a time event for a certain duration
+ * and remain on the given channel. This is done by using the Aux framework in
+ * the FW.
+ * The command was first used for Hot Spot issues - but can be used regardless
+ * to Hot Spot.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @id_and_color: ID and color of the MAC
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
+ *     event_unique_id should be the id of the time event assigned by ucode.
+ *     Otherwise ignore the event_unique_id.
+ * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
+ *     activity.
+ * @channel_info: channel info
+ * @node_addr: Our MAC Address
+ * @reserved: reserved for alignment
+ * @apply_time: GP2 value to start (should always be the current GP2 value)
+ * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
+ *     time by which start of the event is allowed to be postponed.
+ * @duration: event duration in TU To calculate event duration:
+ *     timeEventDuration = min(duration, remainingQuota)
+ */
+struct iwl_hs20_roc_req {
+       /* COMMON_INDEX_HDR_API_S_VER_1 hdr */
+       __le32 id_and_color;
+       __le32 action;
+       __le32 event_unique_id;
+       __le32 sta_id_and_color;
+       struct iwl_fw_channel_info channel_info;
+       u8 node_addr[ETH_ALEN];
+       __le16 reserved;
+       __le32 apply_time;
+       __le32 apply_time_max_delay;
+       __le32 duration;
+} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
+
+/*
+ * values for AUX ROC result values
+ */
+enum iwl_mvm_hot_spot {
+       HOT_SPOT_RSP_STATUS_OK,
+       HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
+       HOT_SPOT_MAX_NUM_OF_SESSIONS,
+};
+
+/*
+ * Aux ROC command response
+ *
+ * In response to iwl_hs20_roc_req the FW sends this command to notify the
+ * driver the uid of the timevent.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @event_unique_id: Unique ID of time event assigned by ucode
+ * @status: Return status 0 is success, all the rest used for specific errors
+ */
+struct iwl_hs20_roc_res {
+       __le32 event_unique_id;
+       __le32 status;
+} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
+
 #define IWL_RX_INFO_PHY_CNT 8
 #define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1
 #define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
@@ -1487,14 +1563,14 @@ enum iwl_sf_scenario {
 
 /**
  * Smart Fifo configuration command.
- * @state: smart fifo state, types listed in iwl_sf_sate.
+ * @state: smart fifo state, types listed in enum %iwl_sf_sate.
  * @watermark: Minimum allowed availabe free space in RXF for transient state.
  * @long_delay_timeouts: aging and idle timer values for each scenario
  * in long delay state.
  * @full_on_timeouts: timer values for each scenario in full on state.
  */
 struct iwl_sf_cfg_cmd {
-       enum iwl_sf_state state;
+       __le32 state;
        __le32 watermark[SF_TRANSIENT_STATES_NUMBER];
        __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
        __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];