#include "fw-api-power.h"
#include "fw-api-d3.h"
#include "fw-api-coex.h"
+#include "fw-api-scan.h"
/* maximal number of Tx queues in any platform */
#define IWL_MVM_MAX_QUEUES 20
#define IWL_MVM_STATION_COUNT 16
+#define IWL_MVM_TDLS_STA_COUNT 4
+
/* commands */
enum {
MVM_ALIVE = 0x1,
/* Scan offload */
SCAN_OFFLOAD_REQUEST_CMD = 0x51,
SCAN_OFFLOAD_ABORT_CMD = 0x52,
+ HOT_SPOT_CMD = 0x53,
SCAN_OFFLOAD_COMPLETE = 0x6D,
SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
MATCH_FOUND_NOTIFICATION = 0xd9,
+ SCAN_ITERATION_COMPLETE = 0xe7,
/* Phy */
PHY_CONFIGURATION_CMD = 0x6a,
BEACON_NOTIFICATION = 0x90,
BEACON_TEMPLATE_CMD = 0x91,
TX_ANT_CONFIGURATION_CMD = 0x98,
- BT_CONFIG = 0x9b,
STATISTICS_NOTIFICATION = 0x9d,
EOSP_NOTIFICATION = 0x9e,
REDUCE_TX_POWER_CMD = 0x9f,
BT_COEX_PRIO_TABLE = 0xcc,
BT_COEX_PROT_ENV = 0xcd,
BT_PROFILE_NOTIFICATION = 0xce,
+ BT_CONFIG = 0x9b,
+ BT_COEX_UPDATE_SW_BOOST = 0x5a,
+ BT_COEX_UPDATE_CORUN_LUT = 0x5b,
+ BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
BT_COEX_CI = 0x5d,
REPLY_SF_CFG_CMD = 0xd1,
/* WiDi Sync Events */
TE_WIDI_TX_SYNC,
+ /* Channel Switch NoA */
+ TE_P2P_GO_CSA_NOA,
+
TE_MAX
}; /* MAC_EVENT_TYPE_API_E_VER_1 */
TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7),
}; /* MAC_EVENT_ACTION_API_E_VER_2 */
-
-/**
- * struct iwl_time_event_cmd_api_v1 - configuring Time Events
- * with struct MAC_TIME_EVENT_DATA_API_S_VER_1 (see also
- * with version 2. determined by IWL_UCODE_TLV_FLAGS)
- * ( TIME_EVENT_CMD = 0x29 )
- * @id_and_color: ID and color of the relevant MAC
- * @action: action to perform, one of FW_CTXT_ACTION_*
- * @id: this field has two meanings, depending on the action:
- * If the action is ADD, then it means the type of event to add.
- * For all other actions it is the unique event ID assigned when the
- * event was added by the FW.
- * @apply_time: When to start the Time Event (in GP2)
- * @max_delay: maximum delay to event's start (apply time), in TU
- * @depends_on: the unique ID of the event we depend on (if any)
- * @interval: interval between repetitions, in TU
- * @interval_reciprocal: 2^32 / interval
- * @duration: duration of event in TU
- * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS
- * @dep_policy: one of TE_V1_INDEPENDENT, TE_V1_DEP_OTHER, TE_V1_DEP_TSF
- * and TE_V1_EVENT_SOCIOPATHIC
- * @is_present: 0 or 1, are we present or absent during the Time Event
- * @max_frags: maximal number of fragments the Time Event can be divided to
- * @notify: notifications using TE_V1_NOTIF_* (whom to notify when)
- */
-struct iwl_time_event_cmd_v1 {
- /* COMMON_INDEX_HDR_API_S_VER_1 */
- __le32 id_and_color;
- __le32 action;
- __le32 id;
- /* MAC_TIME_EVENT_DATA_API_S_VER_1 */
- __le32 apply_time;
- __le32 max_delay;
- __le32 dep_policy;
- __le32 depends_on;
- __le32 is_present;
- __le32 max_frags;
- __le32 interval;
- __le32 interval_reciprocal;
- __le32 duration;
- __le32 repeat;
- __le32 notify;
-} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_1 */
-
-
-/* Time event - defines for command API v2 */
+/* Time event - defines for command API */
/*
* @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
#define TE_V2_PLACEMENT_POS 12
#define TE_V2_ABSENCE_POS 15
-/* Time event policy values (for time event cmd api v2)
+/* Time event policy values
* A notification (both event and fragment) includes a status indicating weather
* the FW was able to schedule the event or not. For fragment start/end
* notification the status is always success. There is no start/end fragment
};
/**
- * struct iwl_time_event_cmd_api_v2 - configuring Time Events
+ * struct iwl_time_event_cmd_api - configuring Time Events
* with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
* with version 1. determined by IWL_UCODE_TLV_FLAGS)
* ( TIME_EVENT_CMD = 0x29 )
* TE_EVENT_SOCIOPATHIC
* using TE_ABSENCE and using TE_NOTIF_*
*/
-struct iwl_time_event_cmd_v2 {
+struct iwl_time_event_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
__le32 id_and_color;
__le32 action;
__le32 dsp_cfg_flags;
} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
+/*
+ * Aux ROC command
+ *
+ * Command requests the firmware to create a time event for a certain duration
+ * and remain on the given channel. This is done by using the Aux framework in
+ * the FW.
+ * The command was first used for Hot Spot issues - but can be used regardless
+ * to Hot Spot.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @id_and_color: ID and color of the MAC
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
+ * event_unique_id should be the id of the time event assigned by ucode.
+ * Otherwise ignore the event_unique_id.
+ * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
+ * activity.
+ * @channel_info: channel info
+ * @node_addr: Our MAC Address
+ * @reserved: reserved for alignment
+ * @apply_time: GP2 value to start (should always be the current GP2 value)
+ * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
+ * time by which start of the event is allowed to be postponed.
+ * @duration: event duration in TU To calculate event duration:
+ * timeEventDuration = min(duration, remainingQuota)
+ */
+struct iwl_hs20_roc_req {
+ /* COMMON_INDEX_HDR_API_S_VER_1 hdr */
+ __le32 id_and_color;
+ __le32 action;
+ __le32 event_unique_id;
+ __le32 sta_id_and_color;
+ struct iwl_fw_channel_info channel_info;
+ u8 node_addr[ETH_ALEN];
+ __le16 reserved;
+ __le32 apply_time;
+ __le32 apply_time_max_delay;
+ __le32 duration;
+} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
+
+/*
+ * values for AUX ROC result values
+ */
+enum iwl_mvm_hot_spot {
+ HOT_SPOT_RSP_STATUS_OK,
+ HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
+ HOT_SPOT_MAX_NUM_OF_SESSIONS,
+};
+
+/*
+ * Aux ROC command response
+ *
+ * In response to iwl_hs20_roc_req the FW sends this command to notify the
+ * driver the uid of the timevent.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @event_unique_id: Unique ID of time event assigned by ucode
+ * @status: Return status 0 is success, all the rest used for specific errors
+ */
+struct iwl_hs20_roc_res {
+ __le32 event_unique_id;
+ __le32 status;
+} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
+
#define IWL_RX_INFO_PHY_CNT 8
#define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1
#define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
/**
* Smart Fifo configuration command.
- * @state: smart fifo state, types listed in iwl_sf_sate.
+ * @state: smart fifo state, types listed in enum %iwl_sf_sate.
* @watermark: Minimum allowed availabe free space in RXF for transient state.
* @long_delay_timeouts: aging and idle timer values for each scenario
* in long delay state.
* @full_on_timeouts: timer values for each scenario in full on state.
*/
struct iwl_sf_cfg_cmd {
- enum iwl_sf_state state;
+ __le32 state;
__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
projects / firefly-linux-kernel-4.4.55.git / blobdiff