iwlwifi: remove IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API flag
[firefly-linux-kernel-4.4.55.git] / drivers / net / wireless / iwlwifi / iwl-fw.h
index 5f1493c44097c5fc0543e0c886a96b9180522841..fbfdba761560bb5eff62c542aef546a77d917d23 100644 (file)
  * @IWL_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD
  * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
  *     offload profile config command.
- * @IWL_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api
- * @IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API.
  * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
  *     (rather than two) IPv6 addresses
- * @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API
  * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
  *     from the probe request template.
- * @IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API: modified D3 API to allow keeping
- *     connection when going back to D0
  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
  * @IWL_UCODE_TLV_FLAGS_SCHED_SCAN: this uCode image supports scheduled scan.
  * @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
  * @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
  *     containing CAM (Continuous Active Mode) indication.
- * @IWL_UCODE_TLV_FLAGS_P2P_PS: P2P client power save is supported (only on a
- *     single bound interface).
+ * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
+ *     P2P client interfaces simultaneously if they are in different bindings.
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
+ *     P2P client interfaces simultaneously if they are in same bindings.
  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
+ * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
  */
 enum iwl_ucode_tlv_flag {
        IWL_UCODE_TLV_FLAGS_PAN                 = BIT(0),
@@ -102,23 +102,37 @@ enum iwl_ucode_tlv_flag {
        IWL_UCODE_TLV_FLAGS_MFP                 = BIT(2),
        IWL_UCODE_TLV_FLAGS_P2P                 = BIT(3),
        IWL_UCODE_TLV_FLAGS_DW_BC_TABLE         = BIT(4),
-       IWL_UCODE_TLV_FLAGS_NEWBT_COEX          = BIT(5),
-       IWL_UCODE_TLV_FLAGS_PM_CMD_SUPPORT      = BIT(6),
        IWL_UCODE_TLV_FLAGS_SHORT_BL            = BIT(7),
-       IWL_UCODE_TLV_FLAGS_RX_ENERGY_API       = BIT(8),
-       IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2   = BIT(9),
        IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS     = BIT(10),
-       IWL_UCODE_TLV_FLAGS_BF_UPDATED          = BIT(11),
        IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID       = BIT(12),
-       IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API   = BIT(14),
        IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL    = BIT(15),
        IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE    = BIT(16),
        IWL_UCODE_TLV_FLAGS_SCHED_SCAN          = BIT(17),
        IWL_UCODE_TLV_FLAGS_STA_KEY_CMD         = BIT(19),
        IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD       = BIT(20),
-       IWL_UCODE_TLV_FLAGS_P2P_PS              = BIT(21),
+       IWL_UCODE_TLV_FLAGS_P2P_PM              = BIT(21),
+       IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM      = BIT(22),
+       IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM      = BIT(23),
        IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT       = BIT(24),
        IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD        = BIT(26),
+       IWL_UCODE_TLV_FLAGS_BCAST_FILTERING     = BIT(29),
+       IWL_UCODE_TLV_FLAGS_GO_UAPSD            = BIT(30),
+};
+
+/**
+ * enum iwl_ucode_tlv_api - ucode api
+ * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field.
+ */
+enum iwl_ucode_tlv_api {
+       IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID     = BIT(0),
+};
+
+/**
+ * enum iwl_ucode_tlv_capa - ucode capabilities
+ * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
+ */
+enum iwl_ucode_tlv_capa {
+       IWL_UCODE_TLV_CAPA_D0I3_SUPPORT         = BIT(0),
 };
 
 /* The default calibrate table size if not specified by firmware file */
@@ -160,13 +174,17 @@ enum iwl_ucode_sec {
  * For 16.0 uCode and above, there is no differentiation between sections,
  * just an offset to the HW address.
  */
-#define IWL_UCODE_SECTION_MAX 6
-#define IWL_UCODE_FIRST_SECTION_OF_SECOND_CPU  (IWL_UCODE_SECTION_MAX/2)
+#define IWL_UCODE_SECTION_MAX 12
+#define IWL_API_ARRAY_SIZE     1
+#define IWL_CAPABILITIES_ARRAY_SIZE    1
+#define CPU1_CPU2_SEPARATOR_SECTION    0xFFFFCCCC
 
 struct iwl_ucode_capabilities {
        u32 max_probe_length;
        u32 standard_phy_calibration_size;
        u32 flags;
+       u32 api[IWL_API_ARRAY_SIZE];
+       u32 capa[IWL_CAPABILITIES_ARRAY_SIZE];
 };
 
 /* one for each uCode image (inst/data, init/runtime/wowlan) */
@@ -285,22 +303,12 @@ struct iwl_fw {
 
        struct iwl_tlv_calib_ctrl default_calib[IWL_UCODE_TYPE_MAX];
        u32 phy_config;
+       u8 valid_tx_ant;
+       u8 valid_rx_ant;
 
        bool mvm_fw;
 
        struct ieee80211_cipher_scheme cs[IWL_UCODE_MAX_CS];
 };
 
-static inline u8 iwl_fw_valid_tx_ant(const struct iwl_fw *fw)
-{
-       return (fw->phy_config & FW_PHY_CFG_TX_CHAIN) >>
-               FW_PHY_CFG_TX_CHAIN_POS;
-}
-
-static inline u8 iwl_fw_valid_rx_ant(const struct iwl_fw *fw)
-{
-       return (fw->phy_config & FW_PHY_CFG_RX_CHAIN) >>
-               FW_PHY_CFG_RX_CHAIN_POS;
-}
-
 #endif  /* __iwl_fw_h__ */