#include "iwl-helpers.h"
#include "iwl-agn.h"
-
-/*
- * set bt_coex_active to true, uCode will do kill/defer
- * every time the priority line is asserted (BT is sending signals on the
- * priority line in the PCIx).
- * set bt_coex_active to false, uCode will ignore the BT activity and
- * perform the normal operation
- *
- * User might experience transmit issue on some platform due to WiFi/BT
- * co-exist problem. The possible behaviors are:
- * Able to scan and finding all the available AP
- * Not able to associate with any AP
- * On those platforms, WiFi communication can be restored by set
- * "bt_coex_active" module parameter to "false"
- *
- * default: bt_coex_active = true (BT_COEX_ENABLE)
- */
-bool bt_coex_active = true;
-module_param(bt_coex_active, bool, S_IRUGO);
-MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
-
u32 iwl_debug_level;
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE;
- if (priv->cfg->sku & IWL_SKU_N)
+ if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)
iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
IEEE80211_BAND_5GHZ);
sband->bitrates = rates;
sband->n_bitrates = IWL_RATE_COUNT_LEGACY;
- if (priv->cfg->sku & IWL_SKU_N)
+ if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)
iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
IEEE80211_BAND_2GHZ);
priv->tx_power_next = max_tx_power;
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
- priv->cfg->sku & IWL_SKU_A) {
+ priv->cfg->sku & EEPROM_SKU_CAP_BAND_52GHZ) {
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
"Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
priv->pci_dev->device,
priv->pci_dev->subsystem_device);
- priv->cfg->sku &= ~IWL_SKU_A;
+ priv->cfg->sku &= ~EEPROM_SKU_CAP_BAND_52GHZ;
}
IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
#ifdef CONFIG_IWLWIFI_DEBUG
int iwl_apm_init(struct iwl_priv *priv)
{
int ret = 0;
- u16 lctl;
-
IWL_DEBUG_INFO(priv, "Init card's basic functions\n");
/*
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
- /*
- * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition.
- * Check if BIOS (or OS) enabled L1-ASPM on this device.
- * If so (likely), disable L0S, so device moves directly L0->L1;
- * costs negligible amount of power savings.
- * If not (unlikely), enable L0S, so there is at least some
- * power savings, even without L1.
- */
- lctl = iwl_pcie_link_ctl(priv);
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
- PCI_CFG_LINK_CTRL_VAL_L1_EN) {
- /* L1-ASPM enabled; disable(!) L0S */
- iwl_set_bit(priv, CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
- iwl_clear_bit(priv, CSR_GIO_REG,
- CSR_GIO_REG_VAL_L0S_ENABLED);
- IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
- }
+ priv->bus.ops->apm_config(&priv->bus);
/* Configure analog phase-lock-loop before activating to D0A */
if (priv->cfg->base_params->pll_cfg_val)
if (priv->tx_power_user_lmt == tx_power && !force)
return 0;
- if (!priv->cfg->ops->lib->send_tx_power)
- return -EOPNOTSUPP;
-
if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) {
IWL_WARN(priv,
"Requested user TXPOWER %d below lower limit %d.\n",
prev_tx_power = priv->tx_power_user_lmt;
priv->tx_power_user_lmt = tx_power;
- ret = priv->cfg->ops->lib->send_tx_power(priv);
+ ret = iwlagn_send_tx_power(priv);
/* if fail to set tx_power, restore the orig. tx power */
if (ret) {
.kill_cts_mask = 0,
};
- if (!bt_coex_active)
+ if (!iwlagn_mod_params.bt_coex_active)
bt_cmd.flags = BT_COEX_DISABLE;
else
bt_cmd.flags = BT_COEX_ENABLE;
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
- return iwlcore_commit_rxon(priv, ctx);
+ return iwlagn_commit_rxon(priv, ctx);
}
static int iwl_setup_interface(struct iwl_priv *priv,
#ifdef CONFIG_PM
-int iwl_pci_suspend(struct device *device)
+int iwl_suspend(struct iwl_priv *priv)
{
- struct pci_dev *pdev = to_pci_dev(device);
- struct iwl_priv *priv = pci_get_drvdata(pdev);
-
/*
* This function is called when system goes into suspend state
* mac80211 will call iwl_mac_stop() from the mac80211 suspend function
return 0;
}
-int iwl_pci_resume(struct device *device)
+int iwl_resume(struct iwl_priv *priv)
{
- struct pci_dev *pdev = to_pci_dev(device);
- struct iwl_priv *priv = pci_get_drvdata(pdev);
bool hw_rfkill = false;
- /*
- * We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state.
- */
- pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
-
iwl_enable_interrupts(priv);
if (!(iwl_read32(priv, CSR_GP_CNTRL) &
return 0;
}
-const struct dev_pm_ops iwl_pm_ops = {
- .suspend = iwl_pci_suspend,
- .resume = iwl_pci_resume,
- .freeze = iwl_pci_suspend,
- .thaw = iwl_pci_resume,
- .poweroff = iwl_pci_suspend,
- .restore = iwl_pci_resume,
-};
-
#endif /* CONFIG_PM */
projects / firefly-linux-kernel-4.4.55.git / blobdiff