#define TX_TIMEOUT (2*HZ)
#define NATSEMI_HW_TIMEOUT 400
-#define NATSEMI_TIMER_FREQ 3*HZ
+#define NATSEMI_TIMER_FREQ 5*HZ
#define NATSEMI_PG0_NREGS 64
#define NATSEMI_RFDR_NREGS 8
#define NATSEMI_PG1_NREGS 4
/* address of a sent-in-place packet/buffer, for later free() */
struct sk_buff *tx_skbuff[TX_RING_SIZE];
dma_addr_t tx_dma[TX_RING_SIZE];
+ struct net_device *dev;
+ struct napi_struct napi;
struct net_device_stats stats;
/* Media monitoring timer */
struct timer_list timer;
static int start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
-static int natsemi_poll(struct net_device *dev, int *budget);
+static int natsemi_poll(struct napi_struct *napi, int budget);
static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do);
static void netdev_tx_done(struct net_device *dev);
static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
const int pcibar = 1; /* PCI base address register */
int prev_eedata;
u32 tmp;
+ DECLARE_MAC_BUF(mac);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
dev = alloc_etherdev(sizeof (struct netdev_private));
if (!dev)
return -ENOMEM;
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
i = pci_request_regions(pdev, DRV_NAME);
dev->irq = irq;
np = netdev_priv(dev);
+ netif_napi_add(dev, &np->napi, natsemi_poll, 64);
np->pci_dev = pdev;
pci_set_drvdata(pdev, dev);
dev->do_ioctl = &netdev_ioctl;
dev->tx_timeout = &tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->poll = natsemi_poll;
- dev->weight = 64;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = &natsemi_poll_controller;
goto err_create_file;
if (netif_msg_drv(np)) {
- printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ",
- dev->name, natsemi_pci_info[chip_idx].name, iostart,
- pci_name(np->pci_dev));
- for (i = 0; i < ETH_ALEN-1; i++)
- printk("%02x:", dev->dev_addr[i]);
- printk("%02x, IRQ %d", dev->dev_addr[i], irq);
+ printk(KERN_INFO "natsemi %s: %s at %#08lx "
+ "(%s), %s, IRQ %d",
+ dev->name, natsemi_pci_info[chip_idx].name, iostart,
+ pci_name(np->pci_dev), print_mac(mac, dev->dev_addr), irq);
if (dev->if_port == PORT_TP)
printk(", port TP.\n");
else if (np->ignore_phy)
a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that
made udelay() unreliable.
The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
- depricated.
+ deprecated.
*/
#define eeprom_delay(ee_addr) readl(ee_addr)
free_irq(dev->irq, dev);
return i;
}
+ napi_enable(&np->napi);
+
init_ring(dev);
spin_lock_irq(&np->lock);
init_registers(dev);
/* Set the timer to check for link beat. */
init_timer(&np->timer);
- np->timer.expires = jiffies + NATSEMI_TIMER_FREQ;
+ np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ);
np->timer.data = (unsigned long)dev;
np->timer.function = &netdev_timer; /* timer handler */
add_timer(&np->timer);
* (these values all come from National)
*/
if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) {
- struct netdev_private *np = netdev_priv(dev);
+ np = netdev_priv(dev);
/* the bug has been triggered - fix the coefficient */
writew(TSTDAT_FIXED, ioaddr + TSTDAT);
struct net_device *dev = (struct net_device *)data;
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
- int next_tick = 5*HZ;
+ int next_tick = NATSEMI_TIMER_FREQ;
if (netif_msg_timer(np)) {
/* DO NOT read the IntrStatus register,
next_tick = 1;
}
}
- mod_timer(&np->timer, jiffies + next_tick);
+
+ if (next_tick > 1)
+ mod_timer(&np->timer, round_jiffies(jiffies + next_tick));
+ else
+ mod_timer(&np->timer, jiffies + next_tick);
}
static void dump_ring(struct net_device *dev)
prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
- if (netif_rx_schedule_prep(dev)) {
+ if (netif_rx_schedule_prep(dev, &np->napi)) {
/* Disable interrupts and register for poll */
natsemi_irq_disable(dev);
- __netif_rx_schedule(dev);
+ __netif_rx_schedule(dev, &np->napi);
} else
printk(KERN_WARNING
"%s: Ignoring interrupt, status %#08x, mask %#08x.\n",
/* This is the NAPI poll routine. As well as the standard RX handling
* it also handles all other interrupts that the chip might raise.
*/
-static int natsemi_poll(struct net_device *dev, int *budget)
+static int natsemi_poll(struct napi_struct *napi, int budget)
{
- struct netdev_private *np = netdev_priv(dev);
+ struct netdev_private *np = container_of(napi, struct netdev_private, napi);
+ struct net_device *dev = np->dev;
void __iomem * ioaddr = ns_ioaddr(dev);
-
- int work_to_do = min(*budget, dev->quota);
int work_done = 0;
do {
if (np->intr_status &
(IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
IntrRxErr | IntrRxOverrun)) {
- netdev_rx(dev, &work_done, work_to_do);
+ netdev_rx(dev, &work_done, budget);
}
if (np->intr_status &
if (np->intr_status & IntrAbnormalSummary)
netdev_error(dev, np->intr_status);
- *budget -= work_done;
- dev->quota -= work_done;
-
- if (work_done >= work_to_do)
- return 1;
+ if (work_done >= budget)
+ return work_done;
np->intr_status = readl(ioaddr + IntrStatus);
} while (np->intr_status);
- netif_rx_complete(dev);
+ netif_rx_complete(dev, napi);
/* Reenable interrupts providing nothing is trying to shut
* the chip down. */
natsemi_irq_enable(dev);
spin_unlock(&np->lock);
- return 0;
+ return work_done;
}
/* This routine is logically part of the interrupt handler, but separated
dev->name);
}
np->stats.rx_fifo_errors++;
+ np->stats.rx_errors++;
}
/* Hmmmmm, it's not clear how to recover from PCI faults. */
if (intr_status & IntrPCIErr) {
printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
intr_status & IntrPCIErr);
np->stats.tx_fifo_errors++;
+ np->stats.tx_errors++;
np->stats.rx_fifo_errors++;
+ np->stats.rx_errors++;
}
spin_unlock(&np->lock);
}
memset(mc_filter, 0, sizeof(mc_filter));
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
- int i = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
- mc_filter[i/8] |= (1 << (i & 0x07));
+ int b = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
+ mc_filter[b/8] |= (1 << (b & 0x07));
}
rx_mode = RxFilterEnable | AcceptBroadcast
| AcceptMulticast | AcceptMyPhys;
dev->name, np->cur_tx, np->dirty_tx,
np->cur_rx, np->dirty_rx);
+ napi_disable(&np->napi);
+
/*
* FIXME: what if someone tries to close a device
* that is suspended?
* disable_irq() to enforce synchronization.
* * natsemi_poll: checks before reenabling interrupts. suspend
* sets hands_off, disables interrupts and then waits with
- * netif_poll_disable().
+ * napi_disable().
*
* Interrupts must be disabled, otherwise hands_off can cause irq storms.
*/
spin_unlock_irq(&np->lock);
enable_irq(dev->irq);
- netif_poll_disable(dev);
+ napi_disable(&np->napi);
/* Update the error counts. */
__get_stats(dev);
{
struct net_device *dev = pci_get_drvdata (pdev);
struct netdev_private *np = netdev_priv(dev);
+ int ret = 0;
rtnl_lock();
if (netif_device_present(dev))
goto out;
if (netif_running(dev)) {
BUG_ON(!np->hands_off);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "pci_enable_device() failed: %d\n", ret);
+ goto out;
+ }
/* pci_power_on(pdev); */
+ napi_enable(&np->napi);
+
natsemi_reset(dev);
init_ring(dev);
disable_irq(dev->irq);
spin_unlock_irq(&np->lock);
enable_irq(dev->irq);
- mod_timer(&np->timer, jiffies + 1*HZ);
+ mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ));
}
netif_device_attach(dev);
- netif_poll_enable(dev);
out:
rtnl_unlock();
- return 0;
+ return ret;
}
#endif /* CONFIG_PM */
projects / firefly-linux-kernel-4.4.55.git / blobdiff