config MTD_COMPLEX_MAPPINGS
bool "Support non-linear mappings of flash chips"
- depends on MTD
help
This causes the chip drivers to allow for complicated
paged mappings of flash chips.
Ignore this option if you use run-time physmap configuration
(i.e., run-time calling physmap_configure()).
+config MTD_PHYSMAP_OF
+ tristate "Flash device in physical memory map based on OF description"
+ depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+ help
+ This provides a 'mapping' driver which allows the NOR Flash and
+ ROM driver code to communicate with chips which are mapped
+ physically into the CPU's memory. The mapping description here is
+ taken from OF device tree.
+
+config MTD_PMC_MSP_EVM
+ tristate "CFI Flash device mapped on PMC-Sierra MSP"
+ depends on PMC_MSP && MTD_CFI
+ select MTD_PARTITIONS
+ help
+ This provides a 'mapping' driver which support the way
+ in which user-programmable flash chips are connected on the
+ PMC-Sierra MSP eval/demo boards
+
+choice
+ prompt "Maximum mappable memory avialable for flash IO"
+ depends on MTD_PMC_MSP_EVM
+ default MSP_FLASH_MAP_LIMIT_32M
+
+config MSP_FLASH_MAP_LIMIT_32M
+ bool "32M"
+
+endchoice
+
+config MSP_FLASH_MAP_LIMIT
+ hex
+ default "0x02000000"
+ depends on MSP_FLASH_MAP_LIMIT_32M
+
+config MTD_PMC_MSP_RAMROOT
+ tristate "Embedded RAM block device for root on PMC-Sierra MSP"
+ depends on PMC_MSP_EMBEDDED_ROOTFS && \
+ (MTD_BLOCK || MTD_BLOCK_RO) && \
+ MTD_RAM
+ help
+ This provides support for the embedded root file system
+ on PMC MSP devices. This memory is mapped as a MTD block device.
+
config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support"
depends on SPARC && MTD_CFI
BE VERY CAREFUL.
+config MTD_ESB2ROM
+ tristate "BIOS flash chip on Intel ESB Controller Hub 2"
+ depends on X86 && MTD_JEDECPROBE && PCI
+ help
+ Support for treating the BIOS flash chip on ESB2 motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
+config MTD_CK804XROM
+ tristate "BIOS flash chip on Nvidia CK804"
+ depends on X86 && MTD_JEDECPROBE && PCI
+ help
+ Support for treating the BIOS flash chip on nvidia motherboards
+ as an MTD device - with this you can reprogram your BIOS.
+
+ BE VERY CAREFUL.
+
config MTD_SCB2_FLASH
tristate "BIOS flash chip on Intel SCB2 boards"
depends on X86 && MTD_JEDECPROBE
config MTD_ALCHEMY
tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support"
- depends on SOC_AU1X00
+ depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
config MTD_MTX1
tristate "4G Systems MTX-1 Flash device"
- depends on MIPS && MIPS_MTX1
+ depends on MIPS_MTX1 && MTD_CFI
help
Flash memory access on 4G Systems MTX-1 Board. If you have one of
these boards and would like to use the flash chips on it, say 'Y'.
Mapping for the Flaga digital module. If you don't have one, ignore
this setting.
-config MTD_BEECH
- tristate "CFI Flash device mapped on IBM 405LP Beech"
- depends on MTD_CFI && BEECH
- help
- This enables access routines for the flash chips on the IBM
- 405LP Beech board. If you have one of these boards and would like
- to use the flash chips on it, say 'Y'.
-
-config MTD_ARCTIC
- tristate "CFI Flash device mapped on IBM 405LP Arctic"
- depends on MTD_CFI && ARCTIC2
- help
- This enables access routines for the flash chips on the IBM 405LP
- Arctic board. If you have one of these boards and would like to
- use the flash chips on it, say 'Y'.
-
config MTD_WALNUT
tristate "Flash device mapped on IBM 405GP Walnut"
depends on MTD_JEDECPROBE && WALNUT
TQ Components TQM834x boards. If you have one of these boards
and would like to use the flash chips on it, say 'Y'.
-config MTD_CSTM_MIPS_IXX
- tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
- depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
- help
- This provides a mapping driver for the Integrated Technology
- Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
- Reference Board. It provides the necessary addressing, length,
- buswidth, vpp code and addition setup of the flash device for
- these boards. In addition, this mapping driver can be used for
- other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
- LEN/BUSWIDTH parameters. This mapping will provide one mtd device
- using one partition. The start address can be offset from the
- beginning of flash and the len can be less than the total flash
- device size to allow a window into the flash. Both CFI and JEDEC
- probes are called.
-
-config MTD_CSTM_MIPS_IXX_START
- hex "Physical start address of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x8000000"
- help
- This is the physical memory location that the MTD driver will
- use for the flash chips on your particular target board.
- Refer to the memory map which should hopefully be in the
- documentation for your board.
-
-config MTD_CSTM_MIPS_IXX_LEN
- hex "Physical length of flash mapping"
- depends on MTD_CSTM_MIPS_IXX
- default "0x4000000"
- help
- This is the total length that the MTD driver will use for the
- flash chips on your particular board. Refer to the memory
- map which should hopefully be in the documentation for your
- board.
-
-config MTD_CSTM_MIPS_IXX_BUSWIDTH
- int "Bus width in octets"
- depends on MTD_CSTM_MIPS_IXX
- default "2"
- help
- This is the total bus width of the mapping of the flash chips
- on your particular board.
-
config MTD_OCELOT
tristate "Momenco Ocelot boot flash device"
- depends on MIPS && MOMENCO_OCELOT
+ depends on MOMENCO_OCELOT
help
This enables access routines for the boot flash device and for the
NVRAM on the Momenco Ocelot board. If you have one of these boards
# This needs CFI or JEDEC, depending on the cards found.
config MTD_PCI
tristate "PCI MTD driver"
- depends on MTD && PCI && MTD_COMPLEX_MAPPINGS
+ depends on PCI && MTD_COMPLEX_MAPPINGS
help
Mapping for accessing flash devices on add-in cards like the Intel XScale
IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode
config MTD_PCMCIA
tristate "PCMCIA MTD driver"
- depends on MTD && PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
+ depends on PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
help
Map driver for accessing PCMCIA linear flash memory cards. These
cards are usually around 4-16MiB in size. This does not include
config MTD_SHARP_SL
bool "ROM mapped on Sharp SL Series"
- depends on MTD && ARCH_PXA
+ depends on ARCH_PXA
help
This enables access to the flash chip on the Sharp SL Series of PDAs.
config MTD_PLATRAM
tristate "Map driver for platform device RAM (mtd-ram)"
- depends on MTD
select MTD_RAM
help
Map driver for RAM areas described via the platform device