}
card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
+ case EXT_CSD_CARD_TYPE_SDR_ALL:
+ case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
+ case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
+ case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
+ card->ext_csd.hs_max_dtr = 200000000;
+ card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
+ break;
+ case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
+ case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
+ case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
+ case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
+ card->ext_csd.hs_max_dtr = 200000000;
+ card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
+ break;
+ case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
+ case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
+ case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
+ case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
+ card->ext_csd.hs_max_dtr = 200000000;
+ card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
+ break;
case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17;
mmc_part_add(card, part_size,
EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx,
- "boot%d", idx, true);
+ "boot%d", idx, true,
+ MMC_BLK_DATA_AREA_BOOT);
}
}
}
card->ext_csd.raw_hc_erase_gap_size =
- ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.raw_sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.raw_sec_erase_mult =
hc_wp_grp_sz);
mmc_part_add(card, part_size << 19,
EXT_CSD_PART_CONFIG_ACC_GP0 + idx,
- "gp%d", idx, false);
+ "gp%d", idx, false,
+ MMC_BLK_DATA_AREA_GP);
}
}
card->ext_csd.sec_trim_mult =
ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
card->ext_csd.trim_timeout = 300 *
ext_csd[EXT_CSD_TRIM_MULT];
+
+ /*
+ * Note that the call to mmc_part_add above defaults to read
+ * only. If this default assumption is changed, the call must
+ * take into account the value of boot_locked below.
+ */
+ card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP];
+ card->ext_csd.boot_ro_lockable = true;
}
if (card->ext_csd.rev >= 5) {
goto out;
/* only compare read only fields */
- err = (!(card->ext_csd.raw_partition_support ==
+ err = !((card->ext_csd.raw_partition_support ==
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
(card->ext_csd.raw_erased_mem_count ==
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
return err;
}
+/*
+ * Selects the desired buswidth and switch to the HS200 mode
+ * if bus width set without error
+ */
+static int mmc_select_hs200(struct mmc_card *card)
+{
+ int idx, err = 0;
+ struct mmc_host *host;
+ static unsigned ext_csd_bits[] = {
+ EXT_CSD_BUS_WIDTH_4,
+ EXT_CSD_BUS_WIDTH_8,
+ };
+ static unsigned bus_widths[] = {
+ MMC_BUS_WIDTH_4,
+ MMC_BUS_WIDTH_8,
+ };
+
+ BUG_ON(!card);
+
+ host = card->host;
+
+ if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
+ host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
+ if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0))
+ err = mmc_set_signal_voltage(host,
+ MMC_SIGNAL_VOLTAGE_180, 0);
+
+ /* If fails try again during next card power cycle */
+ if (err)
+ goto err;
+
+ idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0;
+
+ /*
+ * Unlike SD, MMC cards dont have a configuration register to notify
+ * supported bus width. So bus test command should be run to identify
+ * the supported bus width or compare the ext csd values of current
+ * bus width and ext csd values of 1 bit mode read earlier.
+ */
+ for (; idx >= 0; idx--) {
+
+ /*
+ * Host is capable of 8bit transfer, then switch
+ * the device to work in 8bit transfer mode. If the
+ * mmc switch command returns error then switch to
+ * 4bit transfer mode. On success set the corresponding
+ * bus width on the host.
+ */
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_BUS_WIDTH,
+ ext_csd_bits[idx],
+ card->ext_csd.generic_cmd6_time);
+ if (err)
+ continue;
+
+ mmc_set_bus_width(card->host, bus_widths[idx]);
+
+ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
+ err = mmc_compare_ext_csds(card, bus_widths[idx]);
+ else
+ err = mmc_bus_test(card, bus_widths[idx]);
+ if (!err)
+ break;
+ }
+
+ /* switch to HS200 mode if bus width set successfully */
+ if (!err)
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 2, 0);
+err:
+ return err;
+}
+
/*
* Handle the detection and initialisation of a card.
*
/*
* Activate high speed (if supported)
*/
- if ((card->ext_csd.hs_max_dtr != 0) &&
- (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1,
- card->ext_csd.generic_cmd6_time);
+ if (card->ext_csd.hs_max_dtr != 0) {
+ err = 0;
+ if (card->ext_csd.hs_max_dtr > 52000000 &&
+ host->caps2 & MMC_CAP2_HS200)
+ err = mmc_select_hs200(card);
+ else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
+
if (err && err != -EBADMSG)
goto free_card;
mmc_hostname(card->host));
err = 0;
} else {
- mmc_card_set_highspeed(card);
- mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+ if (card->ext_csd.hs_max_dtr > 52000000 &&
+ host->caps2 & MMC_CAP2_HS200) {
+ mmc_card_set_hs200(card);
+ mmc_set_timing(card->host,
+ MMC_TIMING_MMC_HS200);
+ } else {
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+ }
}
}
*/
max_dtr = (unsigned int)-1;
- if (mmc_card_highspeed(card)) {
+ if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
if (max_dtr > card->ext_csd.hs_max_dtr)
max_dtr = card->ext_csd.hs_max_dtr;
} else if (max_dtr > card->csd.max_dtr) {
ddr = MMC_1_2V_DDR_MODE;
}
+ /*
+ * Indicate HS200 SDR mode (if supported).
+ */
+ if (mmc_card_hs200(card)) {
+ u32 ext_csd_bits;
+ u32 bus_width = card->host->ios.bus_width;
+
+ /*
+ * For devices supporting HS200 mode, the bus width has
+ * to be set before executing the tuning function. If
+ * set before tuning, then device will respond with CRC
+ * errors for responses on CMD line. So for HS200 the
+ * sequence will be
+ * 1. set bus width 4bit / 8 bit (1 bit not supported)
+ * 2. switch to HS200 mode
+ * 3. set the clock to > 52Mhz <=200MHz and
+ * 4. execute tuning for HS200
+ */
+ if ((host->caps2 & MMC_CAP2_HS200) &&
+ card->host->ops->execute_tuning)
+ err = card->host->ops->execute_tuning(card->host,
+ MMC_SEND_TUNING_BLOCK_HS200);
+ if (err) {
+ pr_warning("%s: tuning execution failed\n",
+ mmc_hostname(card->host));
+ goto err;
+ }
+
+ ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+ EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
+ err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
+ if (err) {
+ pr_err("%s: power class selection to bus width %d failed\n",
+ mmc_hostname(card->host), 1 << bus_width);
+ goto err;
+ }
+ }
+
/*
* Activate wide bus and DDR (if supported).
*/
- if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
+ if (!mmc_card_hs200(card) &&
+ (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
static unsigned ext_csd_bits[][2] = {
{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
*
* WARNING: eMMC rules are NOT the same as SD DDR
*/
- if (ddr == EXT_CSD_CARD_TYPE_DDR_1_2V) {
+ if (ddr == MMC_1_2V_DDR_MODE) {
err = mmc_set_signal_voltage(host,
MMC_SIGNAL_VOLTAGE_120, 0);
if (err)
if ((host->caps2 & MMC_CAP2_CACHE_CTRL) &&
card->ext_csd.cache_size > 0) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_CACHE_CTRL, 1, 0);
+ EXT_CSD_CACHE_CTRL, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
/*
* Only if no error, cache is turned on successfully.
*/
- card->ext_csd.cache_ctrl = err ? 0 : 1;
+ if (err) {
+ pr_warning("%s: Cache is supported, "
+ "but failed to turn on (%d)\n",
+ mmc_hostname(card->host), err);
+ card->ext_csd.cache_ctrl = 0;
+ err = 0;
+ } else {
+ card->ext_csd.cache_ctrl = 1;
+ }
}
if (!oldcard)
host->card = NULL;
}
+/*
+ * Card detection - card is alive.
+ */
+static int mmc_alive(struct mmc_host *host)
+{
+ return mmc_send_status(host->card, NULL);
+}
+
/*
* Card detection callback from host.
*/
/*
* Just check if our card has been removed.
*/
- err = mmc_send_status(host->card, NULL);
+ err = _mmc_detect_card_removed(host);
mmc_release_host(host);
BUG_ON(!host->card);
mmc_claim_host(host);
- if (mmc_card_can_sleep(host))
+ if (mmc_card_can_sleep(host)) {
err = mmc_card_sleep(host);
- else if (!mmc_host_is_spi(host))
+ if (!err)
+ mmc_card_set_sleep(host->card);
+ } else if (!mmc_host_is_spi(host))
mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
return err;
BUG_ON(!host->card);
mmc_claim_host(host);
- err = mmc_init_card(host, host->ocr, host->card);
+ if (mmc_card_is_sleep(host->card)) {
+ err = mmc_card_awake(host);
+ mmc_card_clr_sleep(host->card);
+ } else
+ err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
return err;
{
int ret;
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+ mmc_card_clr_sleep(host->card);
mmc_claim_host(host);
ret = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
.suspend = NULL,
.resume = NULL,
.power_restore = mmc_power_restore,
+ .alive = mmc_alive,
};
static const struct mmc_bus_ops mmc_ops_unsafe = {
.suspend = mmc_suspend,
.resume = mmc_resume,
.power_restore = mmc_power_restore,
+ .alive = mmc_alive,
};
static void mmc_attach_bus_ops(struct mmc_host *host)
projects / firefly-linux-kernel-4.4.55.git / blobdiff