config MFD_CORE
tristate
+ select IRQ_DOMAIN
default n
config MFD_88PM860X
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
+config MFD_88PM800
+ tristate "Support Marvell 88PM800"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ This supports for Marvell 88PM800 Power Management IC.
+ This includes the I2C driver and the core APIs _only_, you have to
+ select individual components like voltage regulators, RTC and
+ battery-charger under the corresponding menus.
+
+config MFD_88PM805
+ tristate "Support Marvell 88PM805"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ This supports for Marvell 88PM805 Power Management IC. This includes
+ the I2C driver and the core APIs _only_, you have to select individual
+ components like codec device, headset/Mic device under the
+ corresponding menus.
+
config MFD_SM501
tristate "Support for Silicon Motion SM501"
---help---
config MFD_TPS6586X
bool "TPS6586x Power Management chips"
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
+ select REGMAP_I2C
depends on REGULATOR
help
If you say yes here you get support for the TPS6586X series of
tristate "TWL6030 PWM (Pulse Width Modulator) Support"
depends on TWL4030_CORE
select HAVE_PWM
+ depends on !PWM
default n
help
Say yes here if you want support for TWL6030 PWM.
config MFD_TC6393XB
bool "Support Toshiba TC6393XB"
- depends on GPIOLIB && ARM && HAVE_CLK
+ depends on ARM && HAVE_CLK
+ select GPIOLIB
select MFD_CORE
select MFD_TMIO
help
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
+config MFD_MAX77686
+ bool "Maxim Semiconductor MAX77686 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to support for Maxim Semiconductor MAX77686.
+ This is a Power Management IC with RTC on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX77693
bool "Maxim Semiconductor MAX77693 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
+ select IRQ_DOMAIN
help
Say yes here to support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
additional drivers must be enabled in order to use the functionality
of the device.
-config MFD_S5M_CORE
- bool "SAMSUNG S5M Series Support"
+config MFD_SEC_CORE
+ bool "SAMSUNG Electronics PMIC Series Support"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
help
- Support for the Samsung Electronics S5M MFD series.
+ Support for the Samsung Electronics MFD series.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device
+config MFD_ARIZONA
+ select REGMAP
+ select REGMAP_IRQ
+ select MFD_CORE
+ bool
+
+config MFD_ARIZONA_I2C
+ tristate "Support Wolfson Microelectronics Arizona platform with I2C"
+ select MFD_ARIZONA
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Support for the Wolfson Microelectronics Arizona platform audio SoC
+ core functionality controlled via I2C.
+
+config MFD_ARIZONA_SPI
+ tristate "Support Wolfson Microelectronics Arizona platform with SPI"
+ select MFD_ARIZONA
+ select MFD_CORE
+ select REGMAP_SPI
+ depends on SPI_MASTER
+ help
+ Support for the Wolfson Microelectronics Arizona platform audio SoC
+ core functionality controlled via I2C.
+
+config MFD_WM5102
+ bool "Support Wolfson Microelectronics WM5102"
+ depends on MFD_ARIZONA
+ help
+ Support for Wolfson Microelectronics WM5102 low power audio SoC
+
+config MFD_WM5110
+ bool "Support Wolfson Microelectronics WM5110"
+ depends on MFD_ARIZONA
+ help
+ Support for Wolfson Microelectronics WM5110 low power audio SoC
+
config MFD_WM8400
bool "Support Wolfson Microelectronics WM8400"
select MFD_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
select MFD_CORE
+ select IRQ_DOMAIN
help
Select this option to enable access to AB8500 power management
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
the irq_chip parts for handling the Mixed Signal chip events.
This chip embeds various other multimedia funtionalities as well.
-config AB8500_I2C_CORE
- bool "AB8500 register access via PRCMU I2C"
- depends on AB8500_CORE && MFD_DB8500_PRCMU
- default y
- help
- This enables register access to the AB8500 chip via PRCMU I2C.
- The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
- the I2C bus is connected to the Power Reset
- and Mangagement Unit, PRCMU.
-
config AB8500_DEBUG
bool "Enable debug info via debugfs"
depends on AB8500_CORE && DEBUG_FS
projects / firefly-linux-kernel-4.4.55.git / blobdiff