* for doing DMA.
*
* Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
{ 240 , 0x0800038b },
{ 239 , 0x0800030c },
{ 180 , 0x05000249 },
- { 120 , 0x04000148 }
+ { 120 , 0x04000148 },
+ { 0 , 0 },
};
static struct kauai_timing kauai_mdma_timings[] =
{ 240 , 0x040003cd },
{ 239 , 0x040003cd },
{ 180 , 0x0400028b },
- { 120 , 0x0400010a }
+ { 120 , 0x0400010a },
+ { 0 , 0 },
};
static struct kauai_timing shasta_mdma_timings[] =
for (i=0; table[i].cycle_time; i++)
if (cycle_time > table[i+1].cycle_time)
return table[i].timing_reg;
+ BUG();
return 0;
}
static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
-static int pmac_ide_tune_chipset(ide_drive_t *drive, u8 speed);
-static void pmac_ide_tuneproc(ide_drive_t *drive, u8 pio);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
-pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
+pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
u32 *timings;
unsigned accessTicks, recTicks;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
case controller_sh_ata6: {
/* 133Mhz cell */
u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
- if (tr == 0)
- return;
*timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
break;
}
case controller_k2_ata6: {
/* 100Mhz cell */
u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
- if (tr == 0)
- return;
*timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
break;
}
drive->name, pio, *timings);
#endif
- if (drive->select.all == HWIF(drive)->INB(IDE_SELECT_REG))
- pmac_ide_do_update_timings(drive);
+ if (pmac_ide_do_setfeature(drive, XFER_PIO_0 + pio))
+ return;
+
+ pmac_ide_do_update_timings(drive);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (speed > XFER_UDMA_5 || t == NULL)
return 1;
tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma);
- if (tr == 0)
- return 1;
*ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr;
*ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN;
if (speed > XFER_UDMA_6 || t == NULL)
return 1;
tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma);
- if (tr == 0)
- return 1;
*ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr;
*ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN;
/*
* Calculate MDMA timings for all cells
*/
-static int
+static void
set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
- u8 speed, int drive_cycle_time)
+ u8 speed)
{
int cycleTime, accessTime = 0, recTime = 0;
unsigned accessTicks, recTicks;
+ struct hd_driveid *id = drive->id;
struct mdma_timings_t* tm = NULL;
int i;
case 1: cycleTime = 150; break;
case 2: cycleTime = 120; break;
default:
- return 1;
+ BUG();
+ break;
}
- /* Adjust for drive */
- if (drive_cycle_time && drive_cycle_time > cycleTime)
- cycleTime = drive_cycle_time;
+
+ /* Check if drive provides explicit DMA cycle time */
+ if ((id->field_valid & 2) && id->eide_dma_time)
+ cycleTime = max_t(int, id->eide_dma_time, cycleTime);
+
/* OHare limits according to some old Apple sources */
if ((intf_type == controller_ohare) && (cycleTime < 150))
cycleTime = 150;
break;
i++;
}
- if (i < 0)
- return 1;
cycleTime = tm[i].cycleTime;
accessTime = tm[i].accessTime;
recTime = tm[i].recoveryTime;
case controller_sh_ata6: {
/* 133Mhz cell */
u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime);
- if (tr == 0)
- return 1;
*timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr;
*timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN;
}
case controller_k2_ata6: {
/* 100Mhz cell */
u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime);
- if (tr == 0)
- return 1;
*timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr;
*timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN;
}
printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
drive->name, speed & 0xf, *timings);
#endif
- return 0;
}
#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
/*
* Speedproc. This function is called by the core to set any of the standard
- * timing (PIO, MDMA or UDMA) to both the drive and the controller.
- * You may notice we don't use this function on normal "dma check" operation,
- * our dedicated function is more precise as it uses the drive provided
- * cycle time value. We should probably fix this one to deal with that too...
+ * DMA timing (MDMA or UDMA) to both the drive and the controller.
*/
-static int
-pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
+static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
{
int unit = (drive->select.b.unit & 0x01);
int ret = 0;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
- u32 *timings, *timings2;
+ u32 *timings, *timings2, tl[2];
- if (pmif == NULL)
- return 1;
-
timings = &pmif->timings[unit];
timings2 = &pmif->timings[unit+2];
-
+
+ /* Copy timings to local image */
+ tl[0] = *timings;
+ tl[1] = *timings2;
+
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
case XFER_UDMA_6:
- if (pmif->kind != controller_sh_ata6)
- return 1;
case XFER_UDMA_5:
- if (pmif->kind != controller_un_ata6 &&
- pmif->kind != controller_k2_ata6 &&
- pmif->kind != controller_sh_ata6)
- return 1;
case XFER_UDMA_4:
case XFER_UDMA_3:
- if (drive->hwif->cbl != ATA_CBL_PATA80)
- return 1;
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
if (pmif->kind == controller_kl_ata4)
- ret = set_timings_udma_ata4(timings, speed);
+ ret = set_timings_udma_ata4(&tl[0], speed);
else if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6(timings, timings2, speed);
+ ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta(timings, timings2, speed);
+ ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
else
- ret = 1;
+ ret = 1;
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
- ret = set_timings_mdma(drive, pmif->kind, timings, timings2, speed, 0);
+ set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
break;
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
return 1;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pmac_ide_tuneproc(drive, speed & 0x07);
- break;
default:
ret = 1;
}
ret = pmac_ide_do_setfeature(drive, speed);
if (ret)
return ret;
-
+
+ /* Apply timings to controller */
+ *timings = tl[0];
+ *timings2 = tl[1];
+
pmac_ide_do_update_timings(drive);
return 0;
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
hwif->pio_mask = ATA_PIO4;
- hwif->tuneproc = pmac_ide_tuneproc;
+ hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6)
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {},
};
static struct pci_driver pmac_ide_pci_driver = {
}
}
-/*
- * Pick up best MDMA timing for the drive and apply it
- */
-static int
-pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
-{
- ide_hwif_t *hwif = HWIF(drive);
- pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
- int drive_cycle_time;
- struct hd_driveid *id = drive->id;
- u32 *timings, *timings2;
- u32 timing_local[2];
- int ret;
-
- /* which drive is it ? */
- timings = &pmif->timings[drive->select.b.unit & 0x01];
- timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
-
- /* Check if drive provide explicit cycle time */
- if ((id->field_valid & 2) && (id->eide_dma_time))
- drive_cycle_time = id->eide_dma_time;
- else
- drive_cycle_time = 0;
-
- /* Copy timings to local image */
- timing_local[0] = *timings;
- timing_local[1] = *timings2;
-
- /* Calculate controller timings */
- ret = set_timings_mdma( drive, pmif->kind,
- &timing_local[0],
- &timing_local[1],
- mode,
- drive_cycle_time);
- if (ret)
- return 0;
-
- /* Set feature on drive */
- printk(KERN_INFO "%s: Enabling MultiWord DMA %d\n", drive->name, mode & 0xf);
- ret = pmac_ide_do_setfeature(drive, mode);
- if (ret) {
- printk(KERN_WARNING "%s: Failed !\n", drive->name);
- return 0;
- }
-
- /* Apply timings to controller */
- *timings = timing_local[0];
- *timings2 = timing_local[1];
-
- return 1;
-}
-
-/*
- * Pick up best UDMA timing for the drive and apply it
- */
-static int
-pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
-{
- ide_hwif_t *hwif = HWIF(drive);
- pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
- u32 *timings, *timings2;
- u32 timing_local[2];
- int ret;
-
- /* which drive is it ? */
- timings = &pmif->timings[drive->select.b.unit & 0x01];
- timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
-
- /* Copy timings to local image */
- timing_local[0] = *timings;
- timing_local[1] = *timings2;
-
- /* Calculate timings for interface */
- if (pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6)
- ret = set_timings_udma_ata6( &timing_local[0],
- &timing_local[1],
- mode);
- else if (pmif->kind == controller_sh_ata6)
- ret = set_timings_udma_shasta( &timing_local[0],
- &timing_local[1],
- mode);
- else
- ret = set_timings_udma_ata4(&timing_local[0], mode);
- if (ret)
- return 0;
-
- /* Set feature on drive */
- printk(KERN_INFO "%s: Enabling Ultra DMA %d\n", drive->name, mode & 0x0f);
- ret = pmac_ide_do_setfeature(drive, mode);
- if (ret) {
- printk(KERN_WARNING "%s: Failed !\n", drive->name);
- return 0;
- }
-
- /* Apply timings to controller */
- *timings = timing_local[0];
- *timings2 = timing_local[1];
-
- return 1;
-}
-
/*
* Check what is the best DMA timing setting for the drive and
* call appropriate functions to apply it.
static int
pmac_ide_dma_check(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
int enable = 1;
- int map;
+
drive->using_dma = 0;
if (drive->media == ide_floppy)
enable = 0;
- if (((id->capability & 1) == 0) && !__ide_dma_good_drive(drive))
+ if ((drive->id->capability & 1) == 0 && !__ide_dma_good_drive(drive))
enable = 0;
if (__ide_dma_bad_drive(drive))
enable = 0;
if (enable) {
u8 mode = ide_max_dma_mode(drive);
- if (mode >= XFER_UDMA_0)
- drive->using_dma = pmac_ide_udma_enable(drive, mode);
- else if (mode >= XFER_MW_DMA_0)
- drive->using_dma = pmac_ide_mdma_enable(drive, mode);
- hwif->OUTB(0, IDE_CONTROL_REG);
- /* Apply settings to controller */
- pmac_ide_do_update_timings(drive);
+ if (mode && pmac_ide_tune_chipset(drive, mode) == 0)
+ drive->using_dma = 1;
}
return 0;
}