RK3368 Scpi: add Scpi version check

[firefly-linux-kernel-4.4.55.git] / drivers / hwmon / w83781d.c

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index aeec5b1d81c93d10c81c7d79d1ef65f3996123f2..f9d513949a38a7a47dcb9317c529ef7b5f93a38a 100644 (file)
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -64,8 +64,8 @@ enum chips { w83781d, w83782d, w83783s, as99127f };
 /* Insmod parameters */
 static unsigned short force_subclients[4];
 module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
-                   "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+                "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
 
 static bool reset;
 module_param(reset, bool, 0);
@@ -826,8 +826,9 @@ store_sensor(struct device *dev, struct device_attribute *da,
                data->sens[nr] = val;
                break;
        case W83781D_DEFAULT_BETA:
-               dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
-                        "instead\n", W83781D_DEFAULT_BETA);
+               dev_warn(dev,
+                        "Sensor type %d is deprecated, please use 4 instead\n",
+                        W83781D_DEFAULT_BETA);
                /* fall through */
        case 4:         /* thermistor */
                tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
@@ -874,8 +875,8 @@ w83781d_detect_subclients(struct i2c_client *new_client)
                for (i = 2; i <= 3; i++) {
                        if (force_subclients[i] < 0x48 ||
                            force_subclients[i] > 0x4f) {
-                               dev_err(&new_client->dev, "Invalid subclient "
-                                       "address %d; must be 0x48-0x4f\n",
+                               dev_err(&new_client->dev,
+                                       "Invalid subclient address %d; must be 0x48-0x4f\n",
                                        force_subclients[i]);
                                err = -EINVAL;
                                goto ERROR_SC_1;
@@ -910,9 +911,9 @@ w83781d_detect_subclients(struct i2c_client *new_client)
        for (i = 0; i < num_sc; i++) {
                data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
                if (!data->lm75[i]) {
-                       dev_err(&new_client->dev, "Subclient %d "
-                               "registration at address 0x%x "
-                               "failed.\n", i, sc_addr[i]);
+                       dev_err(&new_client->dev,
+                               "Subclient %d registration at address 0x%x failed.\n",
+                               i, sc_addr[i]);
                        err = -ENOMEM;
                        if (i == 1)
                                goto ERROR_SC_3;
@@ -1176,8 +1177,9 @@ w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
                goto err_nodev;
 
        if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
-               dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
-                       "be the same as ISA device\n", address);
+               dev_dbg(&adapter->dev,
+                       "Device at 0x%02x appears to be the same as ISA device\n",
+                       address);
                goto err_nodev;
        }
 
@@ -1367,8 +1369,8 @@ w83781d_init_device(struct device *dev)
                 * as I see very little reason why this would be needed at
                 * all.
                 */
-               dev_info(dev, "If reset=1 solved a problem you were "
-                        "having, please report!\n");
+               dev_info(dev,
+                        "If reset=1 solved a problem you were having, please report!\n");
 
                /* save these registers */
                i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
@@ -1425,8 +1427,8 @@ w83781d_init_device(struct device *dev)
                /* Enable temp2 */
                tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
                if (tmp & 0x01) {
-                       dev_warn(dev, "Enabling temp2, readings "
-                                "might not make sense\n");
+                       dev_warn(dev,
+                                "Enabling temp2, readings might not make sense\n");
                        w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
                                tmp & 0xfe);
                }
@@ -1436,8 +1438,8 @@ w83781d_init_device(struct device *dev)
                        tmp = w83781d_read_value(data,
                                W83781D_REG_TEMP3_CONFIG);
                        if (tmp & 0x01) {
-                               dev_warn(dev, "Enabling temp3, "
-                                        "readings might not make sense\n");
+                               dev_warn(dev,
+                                        "Enabling temp3, readings might not make sense\n");
                                w83781d_write_value(data,
                                        W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
                        }