static void vlv_steal_power_sequencer(struct drm_device *dev,
enum pipe pipe);
+static unsigned int intel_dp_unused_lane_mask(int lane_count)
+{
+ return ~((1 << lane_count) - 1) & 0xf;
+}
+
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
dst[i] = src >> ((3-i) * 8);
}
-/* hrawclock is 1/4 the FSB frequency */
-static int
-intel_hrawclk(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t clkcfg;
-
- /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
- if (IS_VALLEYVIEW(dev))
- return 200;
-
- clkcfg = I915_READ(CLKCFG);
- switch (clkcfg & CLKCFG_FSB_MASK) {
- case CLKCFG_FSB_400:
- return 100;
- case CLKCFG_FSB_533:
- return 133;
- case CLKCFG_FSB_667:
- return 166;
- case CLKCFG_FSB_800:
- return 200;
- case CLKCFG_FSB_1067:
- return 266;
- case CLKCFG_FSB_1333:
- return 333;
- /* these two are just a guess; one of them might be right */
- case CLKCFG_FSB_1600:
- case CLKCFG_FSB_1600_ALT:
- return 400;
- default:
- return 133;
- }
-}
-
static void
intel_dp_init_panel_power_sequencer(struct drm_device *dev,
struct intel_dp *intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_dp->pps_pipe;
- bool pll_enabled;
+ bool pll_enabled, release_cl_override = false;
+ enum dpio_phy phy = DPIO_PHY(pipe);
+ enum dpio_channel ch = vlv_pipe_to_channel(pipe);
uint32_t DP;
if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN,
* The DPLL for the pipe must be enabled for this to work.
* So enable temporarily it if it's not already enabled.
*/
- if (!pll_enabled)
+ if (!pll_enabled) {
+ release_cl_override = IS_CHERRYVIEW(dev) &&
+ !chv_phy_powergate_ch(dev_priv, phy, ch, true);
+
vlv_force_pll_on(dev, pipe, IS_CHERRYVIEW(dev) ?
&chv_dpll[0].dpll : &vlv_dpll[0].dpll);
+ }
/*
* Similar magic as in intel_dp_enable_port().
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
- if (!pll_enabled)
+ if (!pll_enabled) {
vlv_force_pll_off(dev, pipe);
+
+ if (release_cl_override)
+ chv_phy_powergate_ch(dev_priv, phy, ch, false);
+ }
}
static enum pipe
switch (msg->request & ~DP_AUX_I2C_MOT) {
case DP_AUX_NATIVE_WRITE:
case DP_AUX_I2C_WRITE:
+ case DP_AUX_I2C_WRITE_STATUS_UPDATE:
txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE;
rxsize = 2; /* 0 or 1 data bytes */
return rate_to_index(rate, intel_dp->sink_rates);
}
+static void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
+ uint8_t *link_bw, uint8_t *rate_select)
+{
+ if (intel_dp->num_sink_rates) {
+ *link_bw = 0;
+ *rate_select =
+ intel_dp_rate_select(intel_dp, port_clock);
+ } else {
+ *link_bw = drm_dp_link_rate_to_bw_code(port_clock);
+ *rate_select = 0;
+ }
+}
+
bool
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
int link_avail, link_clock;
int common_rates[DP_MAX_SUPPORTED_RATES] = {};
int common_len;
+ uint8_t link_bw, rate_select;
common_len = intel_dp_common_rates(intel_dp, common_rates);
* CEA-861-E - 5.1 Default Encoding Parameters
* VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
*/
- if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1)
- intel_dp->color_range = DP_COLOR_RANGE_16_235;
- else
- intel_dp->color_range = 0;
- }
-
- if (intel_dp->color_range)
- pipe_config->limited_color_range = true;
-
- intel_dp->lane_count = lane_count;
-
- if (intel_dp->num_sink_rates) {
- intel_dp->link_bw = 0;
- intel_dp->rate_select =
- intel_dp_rate_select(intel_dp, common_rates[clock]);
+ pipe_config->limited_color_range =
+ bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1;
} else {
- intel_dp->link_bw =
- drm_dp_link_rate_to_bw_code(common_rates[clock]);
- intel_dp->rate_select = 0;
+ pipe_config->limited_color_range =
+ intel_dp->limited_color_range;
}
+ pipe_config->lane_count = lane_count;
+
pipe_config->pipe_bpp = bpp;
pipe_config->port_clock = common_rates[clock];
- DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
- intel_dp->link_bw, intel_dp->lane_count,
+ intel_dp_compute_rate(intel_dp, pipe_config->port_clock,
+ &link_bw, &rate_select);
+
+ DRM_DEBUG_KMS("DP link bw %02x rate select %02x lane count %d clock %d bpp %d\n",
+ link_bw, rate_select, pipe_config->lane_count,
pipe_config->port_clock, bpp);
DRM_DEBUG_KMS("DP link bw required %i available %i\n",
mode_rate, link_avail);
udelay(500);
}
+void intel_dp_set_link_params(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *pipe_config)
+{
+ intel_dp->link_rate = pipe_config->port_clock;
+ intel_dp->lane_count = pipe_config->lane_count;
+}
+
static void intel_dp_prepare(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
+ intel_dp_set_link_params(intel_dp, crtc->config);
+
/*
* There are four kinds of DP registers:
*
/* Handle DP bits in common between all three register formats */
intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
- intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count);
+ intel_dp->DP |= DP_PORT_WIDTH(crtc->config->lane_count);
if (crtc->config->has_audio)
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
trans_dp &= ~TRANS_DP_ENH_FRAMING;
I915_WRITE(TRANS_DP_CTL(crtc->pipe), trans_dp);
} else {
- if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev))
- intel_dp->DP |= intel_dp->color_range;
+ if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) &&
+ crtc->config->limited_color_range)
+ intel_dp->DP |= DP_COLOR_RANGE_16_235;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
intel_dp->DP |= DP_SYNC_HS_HIGH;
pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A;
if (HAS_PCH_CPT(dev) && port != PORT_A) {
- tmp = I915_READ(TRANS_DP_CTL(crtc->pipe));
- if (tmp & TRANS_DP_HSYNC_ACTIVE_HIGH)
+ u32 trans_dp = I915_READ(TRANS_DP_CTL(crtc->pipe));
+
+ if (trans_dp & TRANS_DP_HSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
- if (tmp & TRANS_DP_VSYNC_ACTIVE_HIGH)
+ if (trans_dp & TRANS_DP_VSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->has_dp_encoder = true;
+ pipe_config->lane_count =
+ ((tmp & DP_PORT_WIDTH_MASK) >> DP_PORT_WIDTH_SHIFT) + 1;
+
intel_dp_get_m_n(crtc, pipe_config);
if (port == PORT_A) {
intel_dp_link_down(intel_dp);
}
-static void chv_post_disable_dp(struct intel_encoder *encoder)
+static void chv_data_lane_soft_reset(struct intel_encoder *encoder,
+ bool reset)
{
- struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
- struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc =
- to_intel_crtc(encoder->base.crtc);
- enum dpio_channel ch = vlv_dport_to_channel(dport);
- enum pipe pipe = intel_crtc->pipe;
- u32 val;
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
+ struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
+ enum pipe pipe = crtc->pipe;
+ uint32_t val;
- intel_dp_link_down(intel_dp);
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
+ if (reset)
+ val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
+ else
+ val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
- mutex_lock(&dev_priv->sb_lock);
+ if (crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
+ if (reset)
+ val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
+ else
+ val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
+ }
- /* Propagate soft reset to data lane reset */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
val |= CHV_PCS_REQ_SOFTRESET_EN;
+ if (reset)
+ val &= ~DPIO_PCS_CLK_SOFT_RESET;
+ else
+ val |= DPIO_PCS_CLK_SOFT_RESET;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
- val |= CHV_PCS_REQ_SOFTRESET_EN;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
+ if (crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
+ val |= CHV_PCS_REQ_SOFTRESET_EN;
+ if (reset)
+ val &= ~DPIO_PCS_CLK_SOFT_RESET;
+ else
+ val |= DPIO_PCS_CLK_SOFT_RESET;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
+ }
+}
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
- val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
+static void chv_post_disable_dp(struct intel_encoder *encoder)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
- val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
+ intel_dp_link_down(intel_dp);
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* Assert data lane reset */
+ chv_data_lane_soft_reset(encoder, true);
mutex_unlock(&dev_priv->sb_lock);
}
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
uint32_t dp_reg = I915_READ(intel_dp->output_reg);
- unsigned int lane_mask = 0x0;
if (WARN_ON(dp_reg & DP_PORT_EN))
return;
pps_unlock(intel_dp);
- if (IS_VALLEYVIEW(dev))
+ if (IS_VALLEYVIEW(dev)) {
+ unsigned int lane_mask = 0x0;
+
+ if (IS_CHERRYVIEW(dev))
+ lane_mask = intel_dp_unused_lane_mask(crtc->config->lane_count);
+
vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp),
lane_mask);
+ }
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
intel_dp_start_link_train(intel_dp);
val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
- val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
-
- /* Deassert soft data lane reset*/
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
- val |= CHV_PCS_REQ_SOFTRESET_EN;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
- val |= CHV_PCS_REQ_SOFTRESET_EN;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
- val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
- val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
+ val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+ }
/* Program Tx lane latency optimal setting*/
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
/* Set the upar bit */
- data = (i == 1) ? 0x0 : 0x1;
+ if (intel_crtc->config->lane_count == 1)
+ data = 0x0;
+ else
+ data = (i == 1) ? 0x0 : 0x1;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
data << DPIO_UPAR_SHIFT);
}
val |= DPIO_TX2_STAGGER_MASK(0x1f);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
- val |= DPIO_TX2_STAGGER_MASK(0x1f);
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
+ val |= DPIO_TX2_STAGGER_MASK(0x1f);
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+ }
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
DPIO_LANESTAGGER_STRAP(stagger) |
DPIO_TX1_STAGGER_MULT(6) |
DPIO_TX2_STAGGER_MULT(0));
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
- DPIO_LANESTAGGER_STRAP(stagger) |
- DPIO_LANESTAGGER_STRAP_OVRD |
- DPIO_TX1_STAGGER_MASK(0x1f) |
- DPIO_TX1_STAGGER_MULT(7) |
- DPIO_TX2_STAGGER_MULT(5));
+ if (intel_crtc->config->lane_count > 2) {
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
+ DPIO_LANESTAGGER_STRAP(stagger) |
+ DPIO_LANESTAGGER_STRAP_OVRD |
+ DPIO_TX1_STAGGER_MASK(0x1f) |
+ DPIO_TX1_STAGGER_MULT(7) |
+ DPIO_TX2_STAGGER_MULT(5));
+ }
+
+ /* Deassert data lane reset */
+ chv_data_lane_soft_reset(encoder, false);
mutex_unlock(&dev_priv->sb_lock);
intel_enable_dp(encoder);
+
+ /* Second common lane will stay alive on its own now */
+ if (dport->release_cl2_override) {
+ chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false);
+ dport->release_cl2_override = false;
+ }
}
static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
to_intel_crtc(encoder->base.crtc);
enum dpio_channel ch = vlv_dport_to_channel(dport);
enum pipe pipe = intel_crtc->pipe;
+ unsigned int lane_mask =
+ intel_dp_unused_lane_mask(intel_crtc->config->lane_count);
u32 val;
intel_dp_prepare(encoder);
+ /*
+ * Must trick the second common lane into life.
+ * Otherwise we can't even access the PLL.
+ */
+ if (ch == DPIO_CH0 && pipe == PIPE_B)
+ dport->release_cl2_override =
+ !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true);
+
+ chv_phy_powergate_lanes(encoder, true, lane_mask);
+
mutex_lock(&dev_priv->sb_lock);
+ /* Assert data lane reset */
+ chv_data_lane_soft_reset(encoder, true);
+
/* program left/right clock distribution */
if (pipe != PIPE_B) {
val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
val |= CHV_PCS_USEDCLKCHANNEL;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
+ val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+ if (pipe != PIPE_B)
+ val &= ~CHV_PCS_USEDCLKCHANNEL;
+ else
+ val |= CHV_PCS_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
+ }
/*
* This a a bit weird since generally CL
mutex_unlock(&dev_priv->sb_lock);
}
+static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe;
+ u32 val;
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* disable left/right clock distribution */
+ if (pipe != PIPE_B) {
+ val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
+ val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
+ vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
+ } else {
+ val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
+ val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
+ vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
+ }
+
+ mutex_unlock(&dev_priv->sb_lock);
+
+ /*
+ * Leave the power down bit cleared for at least one
+ * lane so that chv_powergate_phy_ch() will power
+ * on something when the channel is otherwise unused.
+ * When the port is off and the override is removed
+ * the lanes power down anyway, so otherwise it doesn't
+ * really matter what the state of power down bits is
+ * after this.
+ */
+ chv_phy_powergate_lanes(encoder, false, 0x0);
+}
+
/*
* Native read with retry for link status and receiver capability reads for
* cases where the sink may still be asleep.
return 0;
}
+static bool chv_need_uniq_trans_scale(uint8_t train_set)
+{
+ return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 &&
+ (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
+}
+
static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
- val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
- val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
- val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
+ val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+ val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+ val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+ }
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
- val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
- val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+ val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+ val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+ }
/* Program swing deemph */
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
val &= ~DPIO_SWING_DEEMPH9P5_MASK;
val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
}
/* Program swing margin */
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
+
val &= ~DPIO_SWING_MARGIN000_MASK;
val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
+
+ /*
+ * Supposedly this value shouldn't matter when unique transition
+ * scale is disabled, but in fact it does matter. Let's just
+ * always program the same value and hope it's OK.
+ */
+ val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
+ val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
+
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
}
- /* Disable unique transition scale */
- for (i = 0; i < 4; i++) {
+ /*
+ * The document said it needs to set bit 27 for ch0 and bit 26
+ * for ch1. Might be a typo in the doc.
+ * For now, for this unique transition scale selection, set bit
+ * 27 for ch0 and ch1.
+ */
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
- val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
- }
-
- if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK)
- == DP_TRAIN_PRE_EMPH_LEVEL_0) &&
- ((train_set & DP_TRAIN_VOLTAGE_SWING_MASK)
- == DP_TRAIN_VOLTAGE_SWING_LEVEL_3)) {
-
- /*
- * The document said it needs to set bit 27 for ch0 and bit 26
- * for ch1. Might be a typo in the doc.
- * For now, for this unique transition scale selection, set bit
- * 27 for ch0 and ch1.
- */
- for (i = 0; i < 4; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
+ if (chv_need_uniq_trans_scale(train_set))
val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
- }
-
- for (i = 0; i < 4; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
- val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
- val |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT);
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
- }
+ else
+ val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
}
/* Start swing calculation */
val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
- val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
+ val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+ }
/* LRC Bypass */
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
uint8_t dp_train_pat)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_private *dev_priv =
+ to_i915(intel_dig_port->base.base.dev);
uint8_t buf[sizeof(intel_dp->train_set) + 1];
int ret, len;
const uint8_t link_status[DP_LINK_STATUS_SIZE])
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_private *dev_priv =
+ to_i915(intel_dig_port->base.base.dev);
int ret;
intel_get_adjust_train(intel_dp, link_status);
int voltage_tries, loop_tries;
uint32_t DP = intel_dp->DP;
uint8_t link_config[2];
+ uint8_t link_bw, rate_select;
if (HAS_DDI(dev))
intel_ddi_prepare_link_retrain(encoder);
+ intel_dp_compute_rate(intel_dp, intel_dp->link_rate,
+ &link_bw, &rate_select);
+
/* Write the link configuration data */
- link_config[0] = intel_dp->link_bw;
+ link_config[0] = link_bw;
link_config[1] = intel_dp->lane_count;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
if (intel_dp->num_sink_rates)
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
- &intel_dp->rate_select, 1);
+ &rate_select, 1);
link_config[0] = 0;
link_config[1] = DP_SET_ANSI_8B10B;
void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
uint32_t training_pattern = DP_TRAINING_PATTERN_2;
- /* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/
- if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3)
+ /*
+ * Training Pattern 3 for HBR2 or 1.2 devices that support it.
+ *
+ * Intel platforms that support HBR2 also support TPS3. TPS3 support is
+ * also mandatory for downstream devices that support HBR2.
+ *
+ * Due to WaDisableHBR2 SKL < B0 is the only exception where TPS3 is
+ * supported but still not enabled.
+ */
+ if (intel_dp_source_supports_hbr2(dev) &&
+ drm_dp_tps3_supported(intel_dp->dpcd))
training_pattern = DP_TRAINING_PATTERN_3;
+ else if (intel_dp->link_rate == 540000)
+ DRM_ERROR("5.4 Gbps link rate without HBR2/TPS3 support\n");
/* channel equalization */
if (!intel_dp_set_link_train(intel_dp, &DP,
}
/* Make sure clock is still ok */
- if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+ if (!drm_dp_clock_recovery_ok(link_status,
+ intel_dp->lane_count)) {
intel_dp->train_set_valid = false;
intel_dp_start_link_train(intel_dp);
intel_dp_set_link_train(intel_dp, &DP,
continue;
}
- if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
+ if (drm_dp_channel_eq_ok(link_status,
+ intel_dp->lane_count)) {
channel_eq = true;
break;
}
}
}
- /* Training Pattern 3 support, Intel platforms that support HBR2 alone
- * have support for TP3 hence that check is used along with dpcd check
- * to ensure TP3 can be enabled.
- * SKL < B0: due it's WaDisableHBR2 is the only exception where TP3 is
- * supported but still not enabled.
- */
- if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
- intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
- intel_dp_source_supports_hbr2(dev)) {
- intel_dp->use_tps3 = true;
- DRM_DEBUG_KMS("Displayport TPS3 supported\n");
- } else
- intel_dp->use_tps3 = false;
+ DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
+ yesno(intel_dp_source_supports_hbr2(dev)),
+ yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
/* Intermediate frequency support */
if (is_edp(intel_dp) &&
return intel_dp->is_mst;
}
-static void intel_dp_sink_crc_stop(struct intel_dp *intel_dp)
+static int intel_dp_sink_crc_stop(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
u8 buf;
+ int ret = 0;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) {
DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
- return;
+ ret = -EIO;
+ goto out;
}
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
- buf & ~DP_TEST_SINK_START) < 0)
+ buf & ~DP_TEST_SINK_START) < 0) {
DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
+ ret = -EIO;
+ goto out;
+ }
+ intel_dp->sink_crc.started = false;
+ out:
hsw_enable_ips(intel_crtc);
+ return ret;
}
static int intel_dp_sink_crc_start(struct intel_dp *intel_dp)
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
u8 buf;
+ int ret;
+
+ if (intel_dp->sink_crc.started) {
+ ret = intel_dp_sink_crc_stop(intel_dp);
+ if (ret)
+ return ret;
+ }
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
return -EIO;
if (!(buf & DP_TEST_CRC_SUPPORTED))
return -ENOTTY;
+ intel_dp->sink_crc.last_count = buf & DP_TEST_COUNT_MASK;
+
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
return -EIO;
return -EIO;
}
+ intel_dp->sink_crc.started = true;
return 0;
}
struct drm_device *dev = dig_port->base.base.dev;
struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
u8 buf;
- int test_crc_count;
+ int count, ret;
int attempts = 6;
- int ret;
+ bool old_equal_new;
ret = intel_dp_sink_crc_start(intel_dp);
if (ret)
return ret;
- if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0) {
- ret = -EIO;
- goto stop;
- }
-
- test_crc_count = buf & DP_TEST_COUNT_MASK;
-
do {
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
+
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_TEST_SINK_MISC, &buf) < 0) {
ret = -EIO;
goto stop;
}
- intel_wait_for_vblank(dev, intel_crtc->pipe);
- } while (--attempts && (buf & DP_TEST_COUNT_MASK) == test_crc_count);
+ count = buf & DP_TEST_COUNT_MASK;
+
+ /*
+ * Count might be reset during the loop. In this case
+ * last known count needs to be reset as well.
+ */
+ if (count == 0)
+ intel_dp->sink_crc.last_count = 0;
+
+ if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) {
+ ret = -EIO;
+ goto stop;
+ }
+
+ old_equal_new = (count == intel_dp->sink_crc.last_count &&
+ !memcmp(intel_dp->sink_crc.last_crc, crc,
+ 6 * sizeof(u8)));
+
+ } while (--attempts && (count == 0 || old_equal_new));
+
+ intel_dp->sink_crc.last_count = buf & DP_TEST_COUNT_MASK;
+ memcpy(intel_dp->sink_crc.last_crc, crc, 6 * sizeof(u8));
if (attempts == 0) {
- DRM_DEBUG_KMS("Panel is unable to calculate CRC after 6 vblanks\n");
- ret = -ETIMEDOUT;
- goto stop;
+ if (old_equal_new) {
+ DRM_DEBUG_KMS("Unreliable Sink CRC counter: Current returned CRC is identical to the previous one\n");
+ } else {
+ DRM_ERROR("Panel is unable to calculate any CRC after 6 vblanks\n");
+ ret = -ETIMEDOUT;
+ goto stop;
+ }
}
- if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0)
- ret = -EIO;
stop:
intel_dp_sink_crc_stop(intel_dp);
return ret;
if (bret == true) {
/* check link status - esi[10] = 0x200c */
- if (intel_dp->active_mst_links && !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
+ if (intel_dp->active_mst_links &&
+ !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
return status;
}
-static enum drm_connector_status
-ironlake_dp_detect(struct intel_dp *intel_dp)
+static bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *port)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ u32 bit;
- if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
- return connector_status_disconnected;
+ switch (port->port) {
+ case PORT_A:
+ return true;
+ case PORT_B:
+ bit = SDE_PORTB_HOTPLUG;
+ break;
+ case PORT_C:
+ bit = SDE_PORTC_HOTPLUG;
+ break;
+ case PORT_D:
+ bit = SDE_PORTD_HOTPLUG;
+ break;
+ default:
+ MISSING_CASE(port->port);
+ return false;
+ }
- return intel_dp_detect_dpcd(intel_dp);
+ return I915_READ(SDEISR) & bit;
+}
+
+static bool cpt_digital_port_connected(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *port)
+{
+ u32 bit;
+
+ switch (port->port) {
+ case PORT_A:
+ return true;
+ case PORT_B:
+ bit = SDE_PORTB_HOTPLUG_CPT;
+ break;
+ case PORT_C:
+ bit = SDE_PORTC_HOTPLUG_CPT;
+ break;
+ case PORT_D:
+ bit = SDE_PORTD_HOTPLUG_CPT;
+ break;
+ case PORT_E:
+ bit = SDE_PORTE_HOTPLUG_SPT;
+ break;
+ default:
+ MISSING_CASE(port->port);
+ return false;
+ }
+
+ return I915_READ(SDEISR) & bit;
}
-static int g4x_digital_port_connected(struct drm_device *dev,
+static bool g4x_digital_port_connected(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *port)
+{
+ u32 bit;
+
+ switch (port->port) {
+ case PORT_B:
+ bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
+ break;
+ case PORT_C:
+ bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
+ break;
+ case PORT_D:
+ bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
+ break;
+ default:
+ MISSING_CASE(port->port);
+ return false;
+ }
+
+ return I915_READ(PORT_HOTPLUG_STAT) & bit;
+}
+
+static bool vlv_digital_port_connected(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *port)
+{
+ u32 bit;
+
+ switch (port->port) {
+ case PORT_B:
+ bit = PORTB_HOTPLUG_LIVE_STATUS_VLV;
+ break;
+ case PORT_C:
+ bit = PORTC_HOTPLUG_LIVE_STATUS_VLV;
+ break;
+ case PORT_D:
+ bit = PORTD_HOTPLUG_LIVE_STATUS_VLV;
+ break;
+ default:
+ MISSING_CASE(port->port);
+ return false;
+ }
+
+ return I915_READ(PORT_HOTPLUG_STAT) & bit;
+}
+
+static bool bxt_digital_port_connected(struct drm_i915_private *dev_priv,
struct intel_digital_port *intel_dig_port)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t bit;
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
+ enum port port;
+ u32 bit;
- if (IS_VALLEYVIEW(dev)) {
- switch (intel_dig_port->port) {
- case PORT_B:
- bit = PORTB_HOTPLUG_LIVE_STATUS_VLV;
- break;
- case PORT_C:
- bit = PORTC_HOTPLUG_LIVE_STATUS_VLV;
- break;
- case PORT_D:
- bit = PORTD_HOTPLUG_LIVE_STATUS_VLV;
- break;
- default:
- return -EINVAL;
- }
- } else {
- switch (intel_dig_port->port) {
- case PORT_B:
- bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
- break;
- case PORT_C:
- bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
- break;
- case PORT_D:
- bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
- break;
- default:
- return -EINVAL;
- }
+ intel_hpd_pin_to_port(intel_encoder->hpd_pin, &port);
+ switch (port) {
+ case PORT_A:
+ bit = BXT_DE_PORT_HP_DDIA;
+ break;
+ case PORT_B:
+ bit = BXT_DE_PORT_HP_DDIB;
+ break;
+ case PORT_C:
+ bit = BXT_DE_PORT_HP_DDIC;
+ break;
+ default:
+ MISSING_CASE(port);
+ return false;
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0)
- return 0;
- return 1;
+ return I915_READ(GEN8_DE_PORT_ISR) & bit;
+}
+
+/*
+ * intel_digital_port_connected - is the specified port connected?
+ * @dev_priv: i915 private structure
+ * @port: the port to test
+ *
+ * Return %true if @port is connected, %false otherwise.
+ */
+bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
+ struct intel_digital_port *port)
+{
+ if (HAS_PCH_IBX(dev_priv))
+ return ibx_digital_port_connected(dev_priv, port);
+ if (HAS_PCH_SPLIT(dev_priv))
+ return cpt_digital_port_connected(dev_priv, port);
+ else if (IS_BROXTON(dev_priv))
+ return bxt_digital_port_connected(dev_priv, port);
+ else if (IS_VALLEYVIEW(dev_priv))
+ return vlv_digital_port_connected(dev_priv, port);
+ else
+ return g4x_digital_port_connected(dev_priv, port);
+}
+
+static enum drm_connector_status
+ironlake_dp_detect(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+
+ if (!intel_digital_port_connected(dev_priv, intel_dig_port))
+ return connector_status_disconnected;
+
+ return intel_dp_detect_dpcd(intel_dp);
}
static enum drm_connector_status
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- int ret;
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp)) {
return status;
}
- ret = g4x_digital_port_connected(dev, intel_dig_port);
- if (ret == -EINVAL)
- return connector_status_unknown;
- else if (ret == 0)
+ if (!intel_digital_port_connected(dev->dev_private, intel_dig_port))
return connector_status_disconnected;
return intel_dp_detect_dpcd(intel_dp);
if (property == dev_priv->broadcast_rgb_property) {
bool old_auto = intel_dp->color_range_auto;
- uint32_t old_range = intel_dp->color_range;
+ bool old_range = intel_dp->limited_color_range;
switch (val) {
case INTEL_BROADCAST_RGB_AUTO:
break;
case INTEL_BROADCAST_RGB_FULL:
intel_dp->color_range_auto = false;
- intel_dp->color_range = 0;
+ intel_dp->limited_color_range = false;
break;
case INTEL_BROADCAST_RGB_LIMITED:
intel_dp->color_range_auto = false;
- intel_dp->color_range = DP_COLOR_RANGE_16_235;
+ intel_dp->limited_color_range = true;
break;
default:
return -EINVAL;
}
if (old_auto == intel_dp->color_range_auto &&
- old_range == intel_dp->color_range)
+ old_range == intel_dp->limited_color_range)
return 0;
goto done;
/* indicate that we need to restart link training */
intel_dp->train_set_valid = false;
- if (HAS_PCH_SPLIT(dev)) {
- if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
- goto mst_fail;
- } else {
- if (g4x_digital_port_connected(dev, intel_dig_port) != 1)
- goto mst_fail;
- }
+ if (!intel_digital_port_connected(dev_priv, intel_dig_port))
+ goto mst_fail;
if (!intel_dp_get_dpcd(intel_dp)) {
goto mst_fail;
[PORT_E] = DVO_PORT_DPE,
};
+ /*
+ * eDP not supported on g4x. so bail out early just
+ * for a bit extra safety in case the VBT is bonkers.
+ */
+ if (INTEL_INFO(dev)->gen < 5)
+ return false;
+
if (port == PORT_A)
return true;
break;
case PORT_B:
intel_encoder->hpd_pin = HPD_PORT_B;
+ if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+ intel_encoder->hpd_pin = HPD_PORT_A;
break;
case PORT_C:
intel_encoder->hpd_pin = HPD_PORT_C;
intel_encoder->pre_enable = chv_pre_enable_dp;
intel_encoder->enable = vlv_enable_dp;
intel_encoder->post_disable = chv_post_disable_dp;
+ intel_encoder->post_pll_disable = chv_dp_post_pll_disable;
} else if (IS_VALLEYVIEW(dev)) {
intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable;
intel_encoder->pre_enable = vlv_pre_enable_dp;
projects / firefly-linux-kernel-4.4.55.git / blobdiff