#define GC_LOW_FREQUENCY_ENABLE (1 << 7)
#define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
#define GC_DISPLAY_CLOCK_333_MHZ (4 << 4)
+#define GC_DISPLAY_CLOCK_267_MHZ_PNV (0 << 4)
+#define GC_DISPLAY_CLOCK_333_MHZ_PNV (1 << 4)
+#define GC_DISPLAY_CLOCK_444_MHZ_PNV (2 << 4)
+#define GC_DISPLAY_CLOCK_200_MHZ_PNV (5 << 4)
+#define GC_DISPLAY_CLOCK_133_MHZ_PNV (6 << 4)
+#define GC_DISPLAY_CLOCK_167_MHZ_PNV (7 << 4)
#define GC_DISPLAY_CLOCK_MASK (7 << 4)
#define GM45_GC_RENDER_CLOCK_MASK (0xf << 0)
#define GM45_GC_RENDER_CLOCK_266_MHZ (8 << 0)
#define PUNIT_REG_GPU_LFM 0xd3
#define PUNIT_REG_GPU_FREQ_REQ 0xd4
#define PUNIT_REG_GPU_FREQ_STS 0xd8
+#define GENFREQSTATUS (1<<0)
#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc
#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */
#define ERR_INT_FIFO_UNDERRUN_C (1<<6)
#define ERR_INT_FIFO_UNDERRUN_B (1<<3)
#define ERR_INT_FIFO_UNDERRUN_A (1<<0)
+#define ERR_INT_FIFO_UNDERRUN(pipe) (1<<(pipe*3))
#define FPGA_DBG 0x42300
#define FPGA_DBG_RM_NOCLAIM (1<<31)
#define _DPLL_B (dev_priv->info->display_mmio_offset + 0x6018)
#define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
#define DPLL_VCO_ENABLE (1 << 31)
-#define DPLL_DVO_HIGH_SPEED (1 << 30)
+#define DPLL_SDVO_HIGH_SPEED (1 << 30)
+#define DPLL_DVO_2X_MODE (1 << 30)
#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30)
#define DPLL_SYNCLOCK_ENABLE (1 << 29)
#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29)
#define MCH_SSKPD_WM0_MASK 0x3f
#define MCH_SSKPD_WM0_VAL 0xc
+#define MCH_SECP_NRG_STTS (MCHBAR_MIRROR_BASE_SNB + 0x592c)
+
/* Clocking configuration register */
#define CLKCFG 0x10c00
#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */
*/
#define CCID 0x2180
#define CCID_EN (1<<0)
+/*
+ * Notes on SNB/IVB/VLV context size:
+ * - Power context is saved elsewhere (LLC or stolen)
+ * - Ring/execlist context is saved on SNB, not on IVB
+ * - Extended context size already includes render context size
+ * - We always need to follow the extended context size.
+ * SNB BSpec has comments indicating that we should use the
+ * render context size instead if execlists are disabled, but
+ * based on empirical testing that's just nonsense.
+ * - Pipelined/VF state is saved on SNB/IVB respectively
+ * - GT1 size just indicates how much of render context
+ * doesn't need saving on GT1
+ */
#define CXT_SIZE 0x21a0
#define GEN6_CXT_POWER_SIZE(cxt_reg) ((cxt_reg >> 24) & 0x3f)
#define GEN6_CXT_RING_SIZE(cxt_reg) ((cxt_reg >> 18) & 0x3f)
#define GEN6_CXT_RENDER_SIZE(cxt_reg) ((cxt_reg >> 12) & 0x3f)
#define GEN6_CXT_EXTENDED_SIZE(cxt_reg) ((cxt_reg >> 6) & 0x3f)
#define GEN6_CXT_PIPELINE_SIZE(cxt_reg) ((cxt_reg >> 0) & 0x3f)
-#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_POWER_SIZE(cxt_reg) + \
- GEN6_CXT_RING_SIZE(cxt_reg) + \
- GEN6_CXT_RENDER_SIZE(cxt_reg) + \
+#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_RING_SIZE(cxt_reg) + \
GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \
GEN6_CXT_PIPELINE_SIZE(cxt_reg))
#define GEN7_CXT_SIZE 0x21a8
#define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f)
#define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7)
#define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f)
-#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_POWER_SIZE(ctx_reg) + \
- GEN7_CXT_RING_SIZE(ctx_reg) + \
- GEN7_CXT_RENDER_SIZE(ctx_reg) + \
- GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \
- GEN7_CXT_GT1_SIZE(ctx_reg) + \
+#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \
GEN7_CXT_VFSTATE_SIZE(ctx_reg))
/* Haswell does have the CXT_SIZE register however it does not appear to be
* valid. Now, docs explain in dwords what is in the context object. The full
#define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B)
#define VSYNCSHIFT(trans) _TRANSCODER(trans, _VSYNCSHIFT_A, _VSYNCSHIFT_B)
+/* HSW eDP PSR registers */
+#define EDP_PSR_CTL 0x64800
+#define EDP_PSR_ENABLE (1<<31)
+#define EDP_PSR_LINK_DISABLE (0<<27)
+#define EDP_PSR_LINK_STANDBY (1<<27)
+#define EDP_PSR_MIN_LINK_ENTRY_TIME_MASK (3<<25)
+#define EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES (0<<25)
+#define EDP_PSR_MIN_LINK_ENTRY_TIME_4_LINES (1<<25)
+#define EDP_PSR_MIN_LINK_ENTRY_TIME_2_LINES (2<<25)
+#define EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES (3<<25)
+#define EDP_PSR_MAX_SLEEP_TIME_SHIFT 20
+#define EDP_PSR_SKIP_AUX_EXIT (1<<12)
+#define EDP_PSR_TP1_TP2_SEL (0<<11)
+#define EDP_PSR_TP1_TP3_SEL (1<<11)
+#define EDP_PSR_TP2_TP3_TIME_500us (0<<8)
+#define EDP_PSR_TP2_TP3_TIME_100us (1<<8)
+#define EDP_PSR_TP2_TP3_TIME_2500us (2<<8)
+#define EDP_PSR_TP2_TP3_TIME_0us (3<<8)
+#define EDP_PSR_TP1_TIME_500us (0<<4)
+#define EDP_PSR_TP1_TIME_100us (1<<4)
+#define EDP_PSR_TP1_TIME_2500us (2<<4)
+#define EDP_PSR_TP1_TIME_0us (3<<4)
+#define EDP_PSR_IDLE_FRAME_SHIFT 0
+
+#define EDP_PSR_AUX_CTL 0x64810
+#define EDP_PSR_AUX_DATA1 0x64814
+#define EDP_PSR_DPCD_COMMAND 0x80060000
+#define EDP_PSR_AUX_DATA2 0x64818
+#define EDP_PSR_DPCD_NORMAL_OPERATION (1<<24)
+#define EDP_PSR_AUX_DATA3 0x6481c
+#define EDP_PSR_AUX_DATA4 0x64820
+#define EDP_PSR_AUX_DATA5 0x64824
+
+#define EDP_PSR_STATUS_CTL 0x64840
+#define EDP_PSR_STATUS_STATE_MASK (7<<29)
+#define EDP_PSR_STATUS_STATE_IDLE (0<<29)
+#define EDP_PSR_STATUS_STATE_SRDONACK (1<<29)
+#define EDP_PSR_STATUS_STATE_SRDENT (2<<29)
+#define EDP_PSR_STATUS_STATE_BUFOFF (3<<29)
+#define EDP_PSR_STATUS_STATE_BUFON (4<<29)
+#define EDP_PSR_STATUS_STATE_AUXACK (5<<29)
+#define EDP_PSR_STATUS_STATE_SRDOFFACK (6<<29)
+#define EDP_PSR_STATUS_LINK_MASK (3<<26)
+#define EDP_PSR_STATUS_LINK_FULL_OFF (0<<26)
+#define EDP_PSR_STATUS_LINK_FULL_ON (1<<26)
+#define EDP_PSR_STATUS_LINK_STANDBY (2<<26)
+#define EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT 20
+#define EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK 0x1f
+#define EDP_PSR_STATUS_COUNT_SHIFT 16
+#define EDP_PSR_STATUS_COUNT_MASK 0xf
+#define EDP_PSR_STATUS_AUX_ERROR (1<<15)
+#define EDP_PSR_STATUS_AUX_SENDING (1<<12)
+#define EDP_PSR_STATUS_SENDING_IDLE (1<<9)
+#define EDP_PSR_STATUS_SENDING_TP2_TP3 (1<<8)
+#define EDP_PSR_STATUS_SENDING_TP1 (1<<4)
+#define EDP_PSR_STATUS_IDLE_MASK 0xf
+
+#define EDP_PSR_PERF_CNT 0x64844
+#define EDP_PSR_PERF_CNT_MASK 0xffffff
+
+#define EDP_PSR_DEBUG_CTL 0x64860
+#define EDP_PSR_DEBUG_MASK_LPSP (1<<27)
+#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
+#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
+
/* VGA port control */
#define ADPA 0x61100
#define PCH_ADPA 0xe1100
* (Haswell and newer) to see which VIDEO_DIP_DATA byte corresponds to each byte
* of the infoframe structure specified by CEA-861. */
#define VIDEO_DIP_DATA_SIZE 32
+#define VIDEO_DIP_VSC_DATA_SIZE 36
#define VIDEO_DIP_CTL 0x61170
/* Pre HSW: */
#define VIDEO_DIP_ENABLE (1 << 31)
#define BLC_PWM_CPU_CTL2 0x48250
#define BLC_PWM_CPU_CTL 0x48254
+#define HSW_BLC_PWM2_CTL 0x48350
+
/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
* like the normal CTL from gen4 and earlier. Hooray for confusing naming. */
#define BLC_PWM_PCH_CTL1 0xc8250
#define BLM_PCH_POLARITY (1 << 29)
#define BLC_PWM_PCH_CTL2 0xc8254
+#define UTIL_PIN_CTL 0x48400
+#define UTIL_PIN_ENABLE (1 << 31)
+
+#define PCH_GTC_CTL 0xe7000
+#define PCH_GTC_ENABLE (1 << 31)
+
/* TV port control */
#define TV_CTL 0x68000
/** Enables the TV encoder */
#define MLTR_WM2_SHIFT 8
/* the unit of memory self-refresh latency time is 0.5us */
#define ILK_SRLT_MASK 0x3f
-#define ILK_LATENCY(shift) (I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK)
-#define ILK_READ_WM1_LATENCY() ILK_LATENCY(MLTR_WM1_SHIFT)
-#define ILK_READ_WM2_LATENCY() ILK_LATENCY(MLTR_WM2_SHIFT)
/* define the fifo size on Ironlake */
#define ILK_DISPLAY_FIFO 128
#define SSKPD_WM2_SHIFT 16
#define SSKPD_WM3_SHIFT 24
-#define SNB_LATENCY(shift) (I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK)
-#define SNB_READ_WM0_LATENCY() SNB_LATENCY(SSKPD_WM0_SHIFT)
-#define SNB_READ_WM1_LATENCY() SNB_LATENCY(SSKPD_WM1_SHIFT)
-#define SNB_READ_WM2_LATENCY() SNB_LATENCY(SSKPD_WM2_SHIFT)
-#define SNB_READ_WM3_LATENCY() SNB_LATENCY(SSKPD_WM3_SHIFT)
-
/*
* The two pipe frame counter registers are not synchronized, so
* reading a stable value is somewhat tricky. The following code
#define DE_PLANEA_FLIP_DONE_IVB (1<<3)
#define DE_PIPEA_VBLANK_IVB (1<<0)
+#define DE_PIPE_VBLANK_ILK(pipe) (1 << ((pipe * 8) + 7))
+#define DE_PIPE_VBLANK_IVB(pipe) (1 << (pipe * 5))
+
#define VLV_MASTER_IER 0x4400c /* Gunit master IER */
#define MASTER_INTERRUPT_ENABLE (1<<31)
#define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6)
#define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3)
#define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0)
+#define SERR_INT_TRANS_FIFO_UNDERRUN(pipe) (1<<(pipe*3))
/* digital port hotplug */
#define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */
_TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
#define HSW_TVIDEO_DIP_AVI_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
+#define HSW_TVIDEO_DIP_VS_DATA(trans) \
+ _TRANSCODER(trans, HSW_VIDEO_DIP_VS_DATA_A, HSW_VIDEO_DIP_VS_DATA_B)
#define HSW_TVIDEO_DIP_SPD_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
#define HSW_TVIDEO_DIP_GCP(trans) \
#define HSW_TVIDEO_DIP_VSC_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B)
+#define HSW_STEREO_3D_CTL_A 0x70020
+#define S3D_ENABLE (1<<31)
+#define HSW_STEREO_3D_CTL_B 0x71020
+
+#define HSW_STEREO_3D_CTL(trans) \
+ _TRANSCODER(trans, HSW_STEREO_3D_CTL_A, HSW_STEREO_3D_CTL_A)
+
#define _PCH_TRANS_HTOTAL_B 0xe1000
#define _PCH_TRANS_HBLANK_B 0xe1004
#define _PCH_TRANS_HSYNC_B 0xe1008
#define GT_FIFO_FREE_ENTRIES 0x120008
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
+#define HSW_IDICR 0x9008
+#define IDIHASHMSK(x) (((x) & 0x3f) << 16)
+#define HSW_EDRAM_PRESENT 0x120010
+
#define GEN6_UCGCTL1 0x9400
# define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5)
# define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7)
#define HSW_PWR_WELL_DRIVER 0x45404 /* CTL2 */
#define HSW_PWR_WELL_KVMR 0x45408 /* CTL3 */
#define HSW_PWR_WELL_DEBUG 0x4540C /* CTL4 */
-#define HSW_PWR_WELL_ENABLE (1<<31)
-#define HSW_PWR_WELL_STATE (1<<30)
+#define HSW_PWR_WELL_ENABLE_REQUEST (1<<31)
+#define HSW_PWR_WELL_STATE_ENABLED (1<<30)
#define HSW_PWR_WELL_CTL5 0x45410
#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31)
#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20)
#define SBI_SSCAUXDIV6 0x0610
#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4)
#define SBI_DBUFF0 0x2a00
-#define SBI_DBUFF0_ENABLE (1<<0)
+#define SBI_GEN0 0x1f00
+#define SBI_GEN0_CFG_BUFFENABLE_DISABLE (1<<0)
/* LPT PIXCLK_GATE */
#define PIXCLK_GATE 0xC6020
#define LCPLL_CLK_FREQ_450 (0<<26)
#define LCPLL_CD_CLOCK_DISABLE (1<<25)
#define LCPLL_CD2X_CLOCK_DISABLE (1<<23)
+#define LCPLL_POWER_DOWN_ALLOW (1<<22)
#define LCPLL_CD_SOURCE_FCLK (1<<21)
+#define LCPLL_CD_SOURCE_FCLK_DONE (1<<19)
+
+#define D_COMP (MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
+#define D_COMP_RCOMP_IN_PROGRESS (1<<9)
+#define D_COMP_COMP_FORCE (1<<8)
+#define D_COMP_COMP_DISABLE (1<<0)
/* Pipe WM_LINETIME - watermark line time */
#define PIPE_WM_LINETIME_A 0x45270
projects / firefly-linux-kernel-4.4.55.git / blobdiff