#include "i915_trace.h"
#include "intel_drv.h"
+/**
+ * DOC: interrupt handling
+ *
+ * These functions provide the basic support for enabling and disabling the
+ * interrupt handling support. There's a lot more functionality in i915_irq.c
+ * and related files, but that will be described in separate chapters.
+ */
+
static const u32 hpd_ibx[] = {
[HPD_CRT] = SDE_CRT_HOTPLUG,
[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc;
- unsigned long flags;
- spin_lock_irqsave(&dev_priv->irq_lock, flags);
+ spin_lock_irq(&dev_priv->irq_lock);
for_each_intel_crtc(dev, crtc) {
u32 reg = PIPESTAT(crtc->pipe);
DRM_ERROR("pipe %c underrun\n", pipe_name(crtc->pipe));
}
- spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+ spin_unlock_irq(&dev_priv->irq_lock);
}
static void i9xx_set_fifo_underrun_reporting(struct drm_device *dev,
ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
else if (IS_GEN7(dev))
ivybridge_set_fifo_underrun_reporting(dev, pipe, enable, old);
- else if (IS_GEN8(dev))
+ else if (IS_GEN8(dev) || IS_GEN9(dev))
broadwell_set_fifo_underrun_reporting(dev, pipe, enable);
return old;
u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK;
assert_spin_locked(&dev_priv->irq_lock);
+ WARN_ON(!intel_irqs_enabled(dev_priv));
if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK ||
status_mask & ~PIPESTAT_INT_STATUS_MASK,
u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK;
assert_spin_locked(&dev_priv->irq_lock);
+ WARN_ON(!intel_irqs_enabled(dev_priv));
if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK ||
status_mask & ~PIPESTAT_INT_STATUS_MASK,
static void i915_enable_asle_pipestat(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long irqflags;
if (!dev_priv->opregion.asle || !IS_MOBILE(dev))
return;
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_STATUS);
if (INTEL_INFO(dev)->gen >= 4)
i915_enable_pipestat(dev_priv, PIPE_A,
PIPE_LEGACY_BLC_EVENT_STATUS);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
}
/**
{
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private, dig_port_work);
- unsigned long irqflags;
u32 long_port_mask, short_port_mask;
struct intel_digital_port *intel_dig_port;
int i, ret;
u32 old_bits = 0;
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
long_port_mask = dev_priv->long_hpd_port_mask;
dev_priv->long_hpd_port_mask = 0;
short_port_mask = dev_priv->short_hpd_port_mask;
dev_priv->short_hpd_port_mask = 0;
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
for (i = 0; i < I915_MAX_PORTS; i++) {
bool valid = false;
}
if (old_bits) {
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
dev_priv->hpd_event_bits |= old_bits;
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
schedule_work(&dev_priv->hotplug_work);
}
}
struct intel_connector *intel_connector;
struct intel_encoder *intel_encoder;
struct drm_connector *connector;
- unsigned long irqflags;
bool hpd_disabled = false;
bool changed = false;
u32 hpd_event_bits;
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
hpd_event_bits = dev_priv->hpd_event_bits;
dev_priv->hpd_event_bits = 0;
msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
}
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
list_for_each_entry(connector, &mode_config->connector_list, head) {
intel_connector = to_intel_connector(connector);
u32 error_status, row, bank, subbank;
char *parity_event[6];
uint32_t misccpctl;
- unsigned long flags;
uint8_t slice = 0;
/* We must turn off DOP level clock gating to access the L3 registers.
out:
WARN_ON(dev_priv->l3_parity.which_slice);
- spin_lock_irqsave(&dev_priv->irq_lock, flags);
+ spin_lock_irq(&dev_priv->irq_lock);
gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv->dev));
- spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+ spin_unlock_irq(&dev_priv->irq_lock);
mutex_unlock(&dev_priv->dev->struct_mutex);
}
}
for_each_pipe(dev_priv, pipe) {
- uint32_t pipe_iir;
+ uint32_t pipe_iir, flip_done = 0, fault_errors = 0;
if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
continue;
if (pipe_iir) {
ret = IRQ_HANDLED;
I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
+
if (pipe_iir & GEN8_PIPE_VBLANK &&
intel_pipe_handle_vblank(dev, pipe))
intel_check_page_flip(dev, pipe);
- if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) {
+ if (IS_GEN9(dev))
+ flip_done = pipe_iir & GEN9_PIPE_PLANE1_FLIP_DONE;
+ else
+ flip_done = pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE;
+
+ if (flip_done) {
intel_prepare_page_flip(dev, pipe);
intel_finish_page_flip_plane(dev, pipe);
}
pipe_name(pipe));
}
- if (pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS) {
+
+ if (IS_GEN9(dev))
+ fault_errors = pipe_iir & GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
+ else
+ fault_errors = pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
+
+ if (fault_errors)
DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
pipe_name(pipe),
pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS);
- }
} else
DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
}
gen8_gt_irq_reset(dev_priv);
for_each_pipe(dev_priv, pipe)
- if (intel_display_power_enabled(dev_priv,
- POWER_DOMAIN_PIPE(pipe)))
+ if (intel_display_power_is_enabled(dev_priv,
+ POWER_DOMAIN_PIPE(pipe)))
GEN8_IRQ_RESET_NDX(DE_PIPE, pipe);
GEN5_IRQ_RESET(GEN8_DE_PORT_);
void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv)
{
- unsigned long irqflags;
uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN;
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_B, dev_priv->de_irq_mask[PIPE_B],
~dev_priv->de_irq_mask[PIPE_B] | extra_ier);
GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_C, dev_priv->de_irq_mask[PIPE_C],
~dev_priv->de_irq_mask[PIPE_C] | extra_ier);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
}
static void cherryview_irq_preinstall(struct drm_device *dev)
static int ironlake_irq_postinstall(struct drm_device *dev)
{
- unsigned long irqflags;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 display_mask, extra_mask;
* spinlocking not required here for correctness since interrupt
* setup is guaranteed to run in single-threaded context. But we
* need it to make the assert_spin_locked happy. */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
}
return 0;
dev_priv->display_irqs_enabled = true;
- if (dev_priv->dev->irq_enabled)
+ if (intel_irqs_enabled(dev_priv))
valleyview_display_irqs_install(dev_priv);
}
dev_priv->display_irqs_enabled = false;
- if (dev_priv->dev->irq_enabled)
+ if (intel_irqs_enabled(dev_priv))
valleyview_display_irqs_uninstall(dev_priv);
}
static int valleyview_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long irqflags;
dev_priv->irq_mask = ~0;
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display_irqs_enabled)
valleyview_display_irqs_install(dev_priv);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IIR, 0xffffffff);
static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
{
- uint32_t de_pipe_masked = GEN8_PIPE_PRIMARY_FLIP_DONE |
- GEN8_PIPE_CDCLK_CRC_DONE |
- GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
- uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
- GEN8_PIPE_FIFO_UNDERRUN;
+ uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE;
+ uint32_t de_pipe_enables;
int pipe;
+
+ if (IS_GEN9(dev_priv))
+ de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE |
+ GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
+ else
+ de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE |
+ GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
+
+ de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
+ GEN8_PIPE_FIFO_UNDERRUN;
+
dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;
dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;
for_each_pipe(dev_priv, pipe)
- if (intel_display_power_enabled(dev_priv,
+ if (intel_display_power_is_enabled(dev_priv,
POWER_DOMAIN_PIPE(pipe)))
GEN8_IRQ_INIT_NDX(DE_PIPE, pipe,
dev_priv->de_irq_mask[pipe],
I915_DISPLAY_PIPE_C_EVENT_INTERRUPT;
u32 pipestat_enable = PLANE_FLIP_DONE_INT_STATUS_VLV |
PIPE_CRC_DONE_INTERRUPT_STATUS;
- unsigned long irqflags;
int pipe;
/*
for_each_pipe(dev_priv, pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS);
for_each_pipe(dev_priv, pipe)
i915_enable_pipestat(dev_priv, pipe, pipestat_enable);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
I915_WRITE(VLV_IIR, 0xffffffff);
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
static void valleyview_irq_uninstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long irqflags;
int pipe;
if (!dev_priv)
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ /* Interrupt setup is already guaranteed to be single-threaded, this is
+ * just to make the assert_spin_locked check happy. */
+ spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display_irqs_enabled)
valleyview_display_irqs_uninstall(dev_priv);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
dev_priv->irq_mask = 0;
static int i8xx_irq_postinstall(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long irqflags;
I915_WRITE16(EMR,
~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
return 0;
}
struct drm_i915_private *dev_priv = dev->dev_private;
u16 iir, new_iir;
u32 pipe_stats[2];
- unsigned long irqflags;
int pipe;
u16 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock(&dev_priv->irq_lock);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false,
"Command parser error, iir 0x%08x",
if (pipe_stats[pipe] & 0x8000ffff)
I915_WRITE(reg, pipe_stats[pipe]);
}
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock(&dev_priv->irq_lock);
I915_WRITE16(IIR, iir & ~flip_mask);
new_iir = I915_READ16(IIR); /* Flush posted writes */
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 enable_mask;
- unsigned long irqflags;
I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
return 0;
}
struct drm_device *dev = arg;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
- unsigned long irqflags;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock(&dev_priv->irq_lock);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false,
"Command parser error, iir 0x%08x",
irq_received = true;
}
}
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock(&dev_priv->irq_lock);
if (!irq_received)
break;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 enable_mask;
u32 error_mask;
- unsigned long irqflags;
/* Unmask the interrupts that we always want on. */
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked check happy. */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
/*
* Enable some error detection, note the instruction error mask
struct drm_i915_private *dev_priv = dev->dev_private;
u32 iir, new_iir;
u32 pipe_stats[I915_MAX_PIPES];
- unsigned long irqflags;
int ret = IRQ_NONE, pipe;
u32 flip_mask =
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
* It doesn't set the bit in iir again, but it still produces
* interrupts (for non-MSI).
*/
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock(&dev_priv->irq_lock);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
i915_handle_error(dev, false,
"Command parser error, iir 0x%08x",
irq_received = true;
}
}
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock(&dev_priv->irq_lock);
if (!irq_received)
break;
I915_WRITE(IIR, I915_READ(IIR));
}
-static void intel_hpd_irq_reenable(struct work_struct *work)
+static void intel_hpd_irq_reenable_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv),
hotplug_reenable_work.work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
- unsigned long irqflags;
int i;
intel_runtime_pm_get(dev_priv);
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
for (i = (HPD_NONE + 1); i < HPD_NUM_PINS; i++) {
struct drm_connector *connector;
}
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
intel_runtime_pm_put(dev_priv);
}
-void intel_irq_init(struct drm_device *dev)
+/**
+ * intel_irq_init - initializes irq support
+ * @dev_priv: i915 device instance
+ *
+ * This function initializes all the irq support including work items, timers
+ * and all the vtables. It does not setup the interrupt itself though.
+ */
+void intel_irq_init(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_device *dev = dev_priv->dev;
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->dig_port_work, i915_digport_work_func);
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
/* Let's track the enabled rps events */
- if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev))
+ if (IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
/* WaGsvRC0ResidencyMethod:vlv */
dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
else
i915_hangcheck_elapsed,
(unsigned long) dev);
INIT_DELAYED_WORK(&dev_priv->hotplug_reenable_work,
- intel_hpd_irq_reenable);
+ intel_hpd_irq_reenable_work);
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
- /* Haven't installed the IRQ handler yet */
- dev_priv->pm._irqs_disabled = true;
-
- if (IS_GEN2(dev)) {
+ if (IS_GEN2(dev_priv)) {
dev->max_vblank_count = 0;
dev->driver->get_vblank_counter = i8xx_get_vblank_counter;
- } else if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
+ } else if (IS_G4X(dev_priv) || INTEL_INFO(dev_priv)->gen >= 5) {
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
} else {
* Gen2 doesn't have a hardware frame counter and so depends on
* vblank interrupts to produce sane vblank seuquence numbers.
*/
- if (!IS_GEN2(dev))
+ if (!IS_GEN2(dev_priv))
dev->vblank_disable_immediate = true;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
}
- if (IS_CHERRYVIEW(dev)) {
+ if (IS_CHERRYVIEW(dev_priv)) {
dev->driver->irq_handler = cherryview_irq_handler;
dev->driver->irq_preinstall = cherryview_irq_preinstall;
dev->driver->irq_postinstall = cherryview_irq_postinstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
- } else if (IS_VALLEYVIEW(dev)) {
+ } else if (IS_VALLEYVIEW(dev_priv)) {
dev->driver->irq_handler = valleyview_irq_handler;
dev->driver->irq_preinstall = valleyview_irq_preinstall;
dev->driver->irq_postinstall = valleyview_irq_postinstall;
dev->driver->enable_vblank = valleyview_enable_vblank;
dev->driver->disable_vblank = valleyview_disable_vblank;
dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
- } else if (IS_GEN8(dev)) {
+ } else if (INTEL_INFO(dev_priv)->gen >= 8) {
dev->driver->irq_handler = gen8_irq_handler;
dev->driver->irq_preinstall = gen8_irq_reset;
dev->driver->irq_postinstall = gen8_irq_postinstall;
dev->driver->disable_vblank = ironlake_disable_vblank;
dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
} else {
- if (INTEL_INFO(dev)->gen == 2) {
+ if (INTEL_INFO(dev_priv)->gen == 2) {
dev->driver->irq_preinstall = i8xx_irq_preinstall;
dev->driver->irq_postinstall = i8xx_irq_postinstall;
dev->driver->irq_handler = i8xx_irq_handler;
dev->driver->irq_uninstall = i8xx_irq_uninstall;
- } else if (INTEL_INFO(dev)->gen == 3) {
+ } else if (INTEL_INFO(dev_priv)->gen == 3) {
dev->driver->irq_preinstall = i915_irq_preinstall;
dev->driver->irq_postinstall = i915_irq_postinstall;
dev->driver->irq_uninstall = i915_irq_uninstall;
}
}
-void intel_hpd_init(struct drm_device *dev)
+/**
+ * intel_hpd_init - initializes and enables hpd support
+ * @dev_priv: i915 device instance
+ *
+ * This function enables the hotplug support. It requires that interrupts have
+ * already been enabled with intel_irq_init_hw(). From this point on hotplug and
+ * poll request can run concurrently to other code, so locking rules must be
+ * obeyed.
+ *
+ * This is a separate step from interrupt enabling to simplify the locking rules
+ * in the driver load and resume code.
+ */
+void intel_hpd_init(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
- unsigned long irqflags;
int i;
for (i = 1; i < HPD_NUM_PINS; i++) {
/* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked checks happy. */
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+ spin_unlock_irq(&dev_priv->irq_lock);
}
-/* Disable interrupts so we can allow runtime PM. */
-void intel_runtime_pm_disable_interrupts(struct drm_device *dev)
+/**
+ * intel_irq_install - enables the hardware interrupt
+ * @dev_priv: i915 device instance
+ *
+ * This function enables the hardware interrupt handling, but leaves the hotplug
+ * handling still disabled. It is called after intel_irq_init().
+ *
+ * In the driver load and resume code we need working interrupts in a few places
+ * but don't want to deal with the hassle of concurrent probe and hotplug
+ * workers. Hence the split into this two-stage approach.
+ */
+int intel_irq_install(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
+ /*
+ * We enable some interrupt sources in our postinstall hooks, so mark
+ * interrupts as enabled _before_ actually enabling them to avoid
+ * special cases in our ordering checks.
+ */
+ dev_priv->pm.irqs_enabled = true;
- dev->driver->irq_uninstall(dev);
- dev_priv->pm._irqs_disabled = true;
+ return drm_irq_install(dev_priv->dev, dev_priv->dev->pdev->irq);
}
-/* Restore interrupts so we can recover from runtime PM. */
-void intel_runtime_pm_restore_interrupts(struct drm_device *dev)
+/**
+ * intel_irq_uninstall - finilizes all irq handling
+ * @dev_priv: i915 device instance
+ *
+ * This stops interrupt and hotplug handling and unregisters and frees all
+ * resources acquired in the init functions.
+ */
+void intel_irq_uninstall(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
+ drm_irq_uninstall(dev_priv->dev);
+ intel_hpd_cancel_work(dev_priv);
+ dev_priv->pm.irqs_enabled = false;
+}
+
+/**
+ * intel_runtime_pm_disable_interrupts - runtime interrupt disabling
+ * @dev_priv: i915 device instance
+ *
+ * This function is used to disable interrupts at runtime, both in the runtime
+ * pm and the system suspend/resume code.
+ */
+void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv)
+{
+ dev_priv->dev->driver->irq_uninstall(dev_priv->dev);
+ dev_priv->pm.irqs_enabled = false;
+}
- dev_priv->pm._irqs_disabled = false;
- dev->driver->irq_preinstall(dev);
- dev->driver->irq_postinstall(dev);
+/**
+ * intel_runtime_pm_enable_interrupts - runtime interrupt enabling
+ * @dev_priv: i915 device instance
+ *
+ * This function is used to enable interrupts at runtime, both in the runtime
+ * pm and the system suspend/resume code.
+ */
+void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv)
+{
+ dev_priv->pm.irqs_enabled = true;
+ dev_priv->dev->driver->irq_preinstall(dev_priv->dev);
+ dev_priv->dev->driver->irq_postinstall(dev_priv->dev);
}
projects / firefly-linux-kernel-4.4.55.git / blobdiff