#define PL330_MAX_CHAN 8
#define PL330_MAX_IRQS 32
#define PL330_MAX_PERI 32
+#define PL330_MAX_BURST 16
+
+#define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
enum pl330_cachectrl {
CCTRL0, /* Noncacheable and nonbufferable */
#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+#define BYTE_MOD_BURST_LEN(b, ccr) (((b) / BRST_SIZE(ccr)) % BRST_LEN(ccr))
/*
* With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
/* for cyclic capability */
bool cyclic;
+
+ /* for runtime pm tracking */
+ bool active;
};
struct pl330_dmac {
/* Peripheral channels connected to this DMAC */
unsigned int num_peripherals;
struct dma_pl330_chan *peripherals; /* keep at end */
+ /* set peripherals request type according to soc config*/
+ enum pl330_cond peripherals_req_type;
+ int quirks;
+};
+
+static struct pl330_of_quirks {
+ char *quirk;
+ int id;
+} of_quirks[] = {
+ {
+ .quirk = "arm,pl330-broken-no-flushp",
+ .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
+ }
};
struct dma_pl330_desc {
return off;
}
-static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
- const struct _xfer_spec *pxs, int cyc)
+static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
+ u8 buf[], const struct _xfer_spec *pxs,
+ int cyc)
{
int off = 0;
+ enum pl330_cond cond = pl330->peripherals_req_type;
while (cyc--) {
- off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
- off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
+ off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
off += _emit_ST(dry_run, &buf[off], ALWAYS);
- off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
+
+ if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
+ off += _emit_FLUSHP(dry_run, &buf[off],
+ pxs->desc->peri);
}
return off;
}
-static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
- const struct _xfer_spec *pxs, int cyc)
+static inline int _ldst_memtodev(struct pl330_dmac *pl330,
+ unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
{
int off = 0;
+ enum pl330_cond cond = pl330->peripherals_req_type;
while (cyc--) {
- off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+ off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
off += _emit_LD(dry_run, &buf[off], ALWAYS);
- off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
- off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
+ off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
+
+ if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
+ off += _emit_FLUSHP(dry_run, &buf[off],
+ pxs->desc->peri);
}
return off;
}
-static int _bursts(unsigned dry_run, u8 buf[],
+static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
const struct _xfer_spec *pxs, int cyc)
{
int off = 0;
switch (pxs->desc->rqtype) {
case DMA_MEM_TO_DEV:
- off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+ off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
break;
case DMA_DEV_TO_MEM:
- off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+ off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
break;
case DMA_MEM_TO_MEM:
off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
}
/* Returns bytes consumed and updates bursts */
-static inline int _loop(unsigned dry_run, u8 buf[],
+static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
unsigned long *bursts, const struct _xfer_spec *pxs)
{
int cyc, cycmax, szlp, szlpend, szbrst, off;
struct _arg_LPEND lpend;
if (*bursts == 1)
- return _bursts(dry_run, buf, pxs, 1);
+ return _bursts(pl330, dry_run, buf, pxs, 1);
/* Max iterations possible in DMALP is 256 */
if (*bursts >= 256*256) {
}
szlp = _emit_LP(1, buf, 0, 0);
- szbrst = _bursts(1, buf, pxs, 1);
+ szbrst = _bursts(pl330, 1, buf, pxs, 1);
lpend.cond = ALWAYS;
lpend.forever = false;
off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
ljmp1 = off;
- off += _bursts(dry_run, &buf[off], pxs, cyc);
+ off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
lpend.cond = ALWAYS;
lpend.forever = false;
return off;
}
-static inline int _setup_loops(unsigned dry_run, u8 buf[],
- const struct _xfer_spec *pxs)
+static inline int _setup_loops(struct pl330_dmac *pl330,
+ unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
{
struct pl330_xfer *x = &pxs->desc->px;
u32 ccr = pxs->ccr;
while (bursts) {
c = bursts;
- off += _loop(dry_run, &buf[off], &c, pxs);
+ off += _loop(pl330, dry_run, &buf[off], &c, pxs);
bursts -= c;
}
return off;
}
-static inline int _setup_xfer(unsigned dry_run, u8 buf[],
- const struct _xfer_spec *pxs)
+static inline int _setup_xfer(struct pl330_dmac *pl330,
+ unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
{
struct pl330_xfer *x = &pxs->desc->px;
int off = 0;
off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
/* Setup Loop(s) */
- off += _setup_loops(dry_run, &buf[off], pxs);
+ off += _setup_loops(pl330, dry_run, &buf[off], pxs);
+
+ if (pl330->peripherals_req_type == BURST) {
+ unsigned int ccr = pxs->ccr;
+ unsigned long c = 0;
+
+ c = BYTE_MOD_BURST_LEN(x->bytes, pxs->ccr);
+
+ if (c) {
+ ccr &= ~(0xf << CC_SRCBRSTLEN_SHFT);
+ ccr &= ~(0xf << CC_DSTBRSTLEN_SHFT);
+ off += _emit_MOV(dry_run, &buf[off], CCR, ccr);
+ off += _loop(pl330, dry_run, &buf[off], &c, pxs);
+ }
+ }
return off;
}
* A req is a sequence of one or more xfer units.
* Returns the number of bytes taken to setup the MC for the req.
*/
-static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
- unsigned index, struct _xfer_spec *pxs)
+static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
+ struct pl330_thread *thrd, unsigned index,
+ struct _xfer_spec *pxs)
{
struct _pl330_req *req = &thrd->req[index];
struct pl330_xfer *x;
off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
x = &pxs->desc->px;
- /* Error if xfer length is not aligned at burst size */
- if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
- return -EINVAL;
+ if (pl330->peripherals_req_type != BURST) {
+ /* Error if xfer length is not aligned at burst size */
+ if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+ return -EINVAL;
+ }
- off += _setup_xfer(dry_run, &buf[off], pxs);
+ off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
/* DMASEV peripheral/event */
off += _emit_SEV(dry_run, &buf[off], thrd->ev);
xs.desc = desc;
/* First dry run to check if req is acceptable */
- ret = _setup_req(1, thrd, idx, &xs);
+ ret = _setup_req(pl330, 1, thrd, idx, &xs);
if (ret < 0)
goto xfer_exit;
/* Hook the request */
thrd->lstenq = idx;
thrd->req[idx].desc = desc;
- _setup_req(0, thrd, idx, &xs);
+ _setup_req(pl330, 0, thrd, idx, &xs);
ret = 0;
_stop(pch->thread);
spin_unlock(&pch->thread->dmac->lock);
power_down = true;
+ pch->active = false;
} else {
/* Make sure the PL330 Channel thread is active */
spin_lock(&pch->thread->dmac->lock);
desc->status = PREP;
list_move_tail(&desc->node, &pch->work_list);
if (power_down) {
+ pch->active = true;
spin_lock(&pch->thread->dmac->lock);
_start(pch->thread);
spin_unlock(&pch->thread->dmac->lock);
unsigned long flags;
struct pl330_dmac *pl330 = pch->dmac;
LIST_HEAD(list);
+ bool power_down = false;
pm_runtime_get_sync(pl330->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
pch->thread->req[0].desc = NULL;
pch->thread->req[1].desc = NULL;
pch->thread->req_running = -1;
+ power_down = pch->active;
+ pch->active = false;
/* Mark all desc done */
list_for_each_entry(desc, &pch->submitted_list, node) {
list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
pm_runtime_mark_last_busy(pl330->ddma.dev);
+ if (power_down)
+ pm_runtime_put_autosuspend(pl330->ddma.dev);
pm_runtime_put_autosuspend(pl330->ddma.dev);
return 0;
* updated on work_list emptiness status.
*/
WARN_ON(list_empty(&pch->submitted_list));
+ pch->active = true;
pm_runtime_get_sync(pch->dmac->ddma.dev);
}
list_splice_tail_init(&pch->submitted_list, &pch->work_list);
desc->rqtype = direction;
desc->rqcfg.brst_size = pch->burst_sz;
- desc->rqcfg.brst_len = 1;
+
+ if (pl330->peripherals_req_type == BURST)
+ desc->rqcfg.brst_len = pch->burst_len;
+ else
+ desc->rqcfg.brst_len = 1;
+
desc->bytes_requested = period_len;
fill_px(&desc->px, dst, src, period_len);
{
struct dma_pl330_desc *first, *desc = NULL;
struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
struct scatterlist *sg;
int i;
dma_addr_t addr;
}
desc->rqcfg.brst_size = pch->burst_sz;
- desc->rqcfg.brst_len = 1;
+
+ if (pl330->peripherals_req_type == BURST)
+ desc->rqcfg.brst_len = pch->burst_len;
+ else
+ desc->rqcfg.brst_len = 1;
+
desc->rqtype = direction;
desc->bytes_requested = sg_dma_len(sg);
}
struct resource *res;
int i, ret, irq;
int num_chan;
+ struct device_node *np = adev->dev.of_node;
pdat = dev_get_platdata(&adev->dev);
pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
+ if (of_find_property(np, "peripherals-req-type-burst", NULL))
+ pl330->peripherals_req_type = BURST;
+ else
+ pl330->peripherals_req_type = SINGLE;
+
+ /* get quirk */
+ for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
+ if (of_property_read_bool(np, of_quirks[i].quirk))
+ pl330->quirks |= of_quirks[i].id;
+
res = &adev->res;
pl330->base = devm_ioremap_resource(&adev->dev, res);
if (IS_ERR(pl330->base))
pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+ pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
+ 1 : PL330_MAX_BURST);
ret = dma_async_device_register(pd);
if (ret) {