to update the PATA_PLATFORM entry.
menuconfig ATA
- tristate "Serial ATA and Parallel ATA drivers"
+ tristate "Serial ATA and Parallel ATA drivers (libata)"
depends on HAS_IOMEM
depends on BLOCK
depends on !(M32R || M68K || S390) || BROKEN
select SCSI
+ select GLOB
---help---
- If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
+ If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
any other ATA device under Linux, say Y and make sure that you know
the name of your ATA host adapter (the card inside your computer
that "speaks" the ATA protocol, also called ATA controller),
config ATA_ACPI
bool "ATA ACPI Support"
- depends on ACPI && PCI
+ depends on ACPI
default y
help
This option adds support for ATA-related ACPI objects.
config SATA_ZPODD
bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
- depends on ATA_ACPI
+ depends on ATA_ACPI && PM
default n
help
This option adds support for SATA Zero Power Optical Disc
If unsure, say N.
+config AHCI_BRCMSTB
+ tristate "Broadcom STB AHCI SATA support"
+ depends on ARCH_BRCMSTB
+ help
+ This option enables support for the AHCI SATA3 controller found on
+ STB SoC's.
+
+ If unsure, say N.
+
+config AHCI_DA850
+ tristate "DaVinci DA850 AHCI SATA support"
+ depends on ARCH_DAVINCI_DA850
+ help
+ This option enables support for the DaVinci DA850 SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_ST
+ tristate "ST AHCI SATA support"
+ depends on ARCH_STI
+ help
+ This option enables support for ST AHCI SATA controller.
+
+ If unsure, say N.
+
+config AHCI_IMX
+ tristate "Freescale i.MX AHCI SATA support"
+ depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
+ help
+ This option enables support for the Freescale i.MX SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_CEVA
+ tristate "CEVA AHCI SATA support"
+ depends on OF
+ help
+ This option enables support for the CEVA AHCI SATA.
+ It can be found on the Xilinx Zynq UltraScale+ MPSoC.
+
+ If unsure, say N.
+
+config AHCI_MVEBU
+ tristate "Marvell EBU AHCI SATA support"
+ depends on ARCH_MVEBU
+ help
+ This option enables support for the Marvebu EBU SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_SUNXI
+ tristate "Allwinner sunxi AHCI SATA support"
+ depends on ARCH_SUNXI
+ help
+ This option enables support for the Allwinner sunxi SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_TEGRA
+ tristate "NVIDIA Tegra124 AHCI SATA support"
+ depends on ARCH_TEGRA
+ help
+ This option enables support for the NVIDIA Tegra124 SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_XGENE
+ tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
+ depends on PHY_XGENE
+ help
+ This option enables support for APM X-Gene SoC SATA host controller.
+
+config AHCI_QORIQ
+ tristate "Freescale QorIQ AHCI SATA support"
+ depends on OF
+ help
+ This option enables support for the Freescale QorIQ AHCI SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
If unsure, say N.
config SATA_INIC162X
- tristate "Initio 162x SATA support"
+ tristate "Initio 162x SATA support (Very Experimental)"
depends on PCI
help
This option enables support for Initio 162x Serial ATA.
config PATA_OCTEON_CF
tristate "OCTEON Boot Bus Compact Flash support"
- depends on CPU_CAVIUM_OCTEON
+ depends on CAVIUM_OCTEON_SOC
help
This option enables a polled compact flash driver for use with
compact flash cards attached to the OCTEON boot bus.
config SATA_DWC
tristate "DesignWare Cores SATA support"
depends on 460EX
+ select DW_DMAC
help
This option enables support for the on-chip SATA controller of the
AppliedMicro processor 460EX.
config SATA_HIGHBANK
tristate "Calxeda Highbank SATA support"
+ depends on ARCH_HIGHBANK || COMPILE_TEST
help
This option enables support for the Calxeda Highbank SoC's
onboard SATA.
config SATA_MV
tristate "Marvell SATA support"
+ depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
+ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
+ select GENERIC_PHY
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
config SATA_RCAR
tristate "Renesas R-Car SATA support"
- depends on ARCH_SHMOBILE && ARCH_R8A7779
+ depends on ARCH_SHMOBILE || COMPILE_TEST
help
This option enables support for Renesas R-Car Serial ATA.
config PATA_ARASAN_CF
tristate "ARASAN CompactFlash PATA Controller Support"
+ depends on ARCH_SPEAR13XX || COMPILE_TEST
depends on DMADEVICES
select DMA_ENGINE
help
config PATA_CS5520
tristate "CS5510/5520 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the Cyrix 5510/5520
companion chip used with the MediaGX/Geode processor family.
config PATA_CS5530
tristate "CS5530 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
companion chip used with the MediaGX/Geode processor family.
config PATA_CS5535
tristate "CS5535 PATA support (Experimental)"
- depends on PCI && X86 && !X86_64
+ depends on PCI && X86_32
help
This option enables support for the NatSemi/AMD CS5535
companion chip used with the Geode processor family.
config PATA_CS5536
tristate "CS5536 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
config PATA_SC1200
tristate "SC1200 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
If unsure, say N.
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
- help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
-
- If unsure, say N.
-
config PATA_SCH
tristate "Intel SCH PATA support"
depends on PCI
config PATA_AT91
tristate "PATA support for AT91SAM9260"
- depends on ARM && ARCH_AT91
+ depends on ARM && SOC_AT91SAM9
help
This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.