:local:
LLVM has two vectorizers: The :ref:`Loop Vectorizer <loop-vectorizer>`,
-which operates on Loops, and the :ref:`Basic Block Vectorizer
-<bb-vectorizer>`, which optimizes straight-line code. These vectorizers
+which operates on Loops, and the :ref:`SLP Vectorizer
+<slp-vectorizer>`. These vectorizers
focus on different optimization opportunities and use different techniques.
-The BB vectorizer merges multiple scalars that are found in the code into
-vectors while the Loop Vectorizer widens instructions in the original loop
-to operate on multiple consecutive loop iterations.
+The SLP vectorizer merges multiple scalars that are found in the code into
+vectors while the Loop Vectorizer widens instructions in loops
+to operate on multiple consecutive iterations.
+
+Both the Loop Vectorizer and the SLP Vectorizer are enabled by default.
.. _loop-vectorizer:
Usage
-----
-LLVM's Loop Vectorizer is now available and will be useful for many people.
-It is not enabled by default, but can be enabled through clang using the
-command line flag:
+The Loop Vectorizer is enabled by default, but it can be disabled
+through clang using the command line flag:
.. code-block:: console
- $ clang -fvectorize -O3 file.c
+ $ clang ... -fno-vectorize file.c
+
+Command line flags
+^^^^^^^^^^^^^^^^^^
+
+The loop vectorizer uses a cost model to decide on the optimal vectorization factor
+and unroll factor. However, users of the vectorizer can force the vectorizer to use
+specific values. Both 'clang' and 'opt' support the flags below.
-If the ``-fvectorize`` flag is used then the loop vectorizer will be enabled
-when running with ``-O3``, ``-O2``. When ``-Os`` is used, the loop vectorizer
-will only vectorize loops that do not require a major increase in code size.
+Users can control the vectorization SIMD width using the command line flag "-force-vector-width".
-We plan to enable the Loop Vectorizer by default as part of the LLVM 3.3 release.
+.. code-block:: console
+
+ $ clang -mllvm -force-vector-width=8 ...
+ $ opt -loop-vectorize -force-vector-width=8 ...
+
+Users can control the unroll factor using the command line flag "-force-vector-unroll"
+
+.. code-block:: console
+
+ $ clang -mllvm -force-vector-unroll=2 ...
+ $ opt -loop-vectorize -force-vector-unroll=2 ...
Features
--------
return sum;
}
+We support floating point reduction operations when `-ffast-math` is used.
+
Inductions
^^^^^^^^^^
Scatter / Gather
^^^^^^^^^^^^^^^^
-The Loop Vectorizer can vectorize code that becomes scatter/gather
-memory accesses.
+The Loop Vectorizer can vectorize code that becomes a sequence of scalar instructions
+that scatter/gathers memory.
.. code-block:: c++
- int foo(int *A, int *B, int n, int k) {
- for (int i = 0; i < n; ++i)
- A[i*7] += B[i*k];
+ int foo(int * A, int * B, int n) {
+ for (intptr_t i = 0; i < n; ++i)
+ A[i] += B[i * 4];
}
+In many situations the cost model will inform LLVM that this is not beneficial
+and LLVM will only vectorize such code if forced with "-mllvm -force-vector-width=#".
+
Vectorization of Mixed Types
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
A[i] += 4 * B[i];
}
+Global Structures Alias Analysis
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Access to global structures can also be vectorized, with alias analysis being
+used to make sure accesses don't alias. Run-time checks can also be added on
+pointer access to structure members.
+
+Many variations are supported, but some that rely on undefined behaviour being
+ignored (as other compilers do) are still being left un-vectorized.
+
+.. code-block:: c++
+
+ struct { int A[100], K, B[100]; } Foo;
+
+ int foo() {
+ for (int i = 0; i < 100; ++i)
+ Foo.A[i] = Foo.B[i] + 100;
+ }
+
Vectorization of function calls
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+-----+-----+---------+
|fma |trunc|nearbyint|
+-----+-----+---------+
+| | | fmuladd |
++-----+-----+---------+
+
+The loop vectorizer knows about special instructions on the target and will
+vectorize a loop containing a function call that maps to the instructions. For
+example, the loop below will be vectorized on Intel x86 if the SSE4.1 roundps
+instruction is available.
+
+.. code-block:: c++
+
+ void foo(float *f) {
+ for (int i = 0; i != 1024; ++i)
+ f[i] = floorf(f[i]);
+ }
+
+Partial unrolling during vectorization
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Modern processors feature multiple execution units, and only programs that contain a
+high degree of parallelism can fully utilize the entire width of the machine.
+The Loop Vectorizer increases the instruction level parallelism (ILP) by
+performing partial-unrolling of loops.
+
+In the example below the entire array is accumulated into the variable 'sum'.
+This is inefficient because only a single execution port can be used by the processor.
+By unrolling the code the Loop Vectorizer allows two or more execution ports
+to be used simultaneously.
+
+.. code-block:: c++
+
+ int foo(int *A, int *B, int n) {
+ unsigned sum = 0;
+ for (int i = 0; i < n; ++i)
+ sum += A[i];
+ return sum;
+ }
+
+The Loop Vectorizer uses a cost model to decide when it is profitable to unroll loops.
+The decision to unroll the loop depends on the register pressure and the generated code size.
Performance
-----------
The Y-axis shows the time in msec. Lower is better. The last column shows the geomean of all the kernels.
.. image:: gcc-loops.png
- :width: 100%
-.. _bb-vectorizer:
+And Linpack-pc with the same configuration. Result is Mflops, higher is better.
-The Basic Block Vectorizer
-==========================
+.. image:: linpack-pc.png
-Usage
-------
+.. _slp-vectorizer:
-The Basic Block Vectorizer is not enabled by default, but it can be enabled
-through clang using the command line flag:
-
-.. code-block:: console
-
- $ clang -fslp-vectorize file.c
+The SLP Vectorizer
+==================
Details
-------
-The goal of basic-block vectorization (a.k.a. superword-level parallelism) is
-to combine similar independent instructions within simple control-flow regions
-into vector instructions. Memory accesses, arithemetic operations, comparison
-operations and some math functions can all be vectorized using this technique
-(subject to the capabilities of the target architecture).
+The goal of SLP vectorization (a.k.a. superword-level parallelism) is
+to combine similar independent instructions
+into vector instructions. Memory accesses, arithmetic operations, comparison
+operations, PHI-nodes, can all be vectorized using this technique.
For example, the following function performs very similar operations on its
inputs (a1, b1) and (a2, b2). The basic-block vectorizer may combine these
.. code-block:: c++
- int foo(int a1, int a2, int b1, int b2) {
- int r1 = a1*(a1 + b1)/b1 + 50*b1/a1;
- int r2 = a2*(a2 + b2)/b2 + 50*b2/a2;
- return r1 + r2;
+ void foo(int a1, int a2, int b1, int b2, int *A) {
+ A[0] = a1*(a1 + b1)/b1 + 50*b1/a1;
+ A[1] = a2*(a2 + b2)/b2 + 50*b2/a2;
}
+The SLP-vectorizer processes the code bottom-up, across basic blocks, in search of scalars to combine.
+
+Usage
+------
+
+The SLP Vectorizer is enabled by default, but it can be disabled
+through clang using the command line flag:
+
+.. code-block:: console
+
+ $ clang -fno-slp-vectorize file.c
+
+LLVM has a second basic block vectorization phase
+which is more compile-time intensive (The BB vectorizer). This optimization
+can be enabled through clang using the command line flag:
+
+.. code-block:: console
+
+ $ clang -fslp-vectorize-aggressive file.c