+++ /dev/null
-/* arch/m68knommu/platform/68360/head-rom.S
- *
- * Startup code for Motorola 68360
- *
- * Copyright (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- * uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-
-.global _stext
-.global __bss_start
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-
-#define REGB 0x1000
-#define PEPAR (_dprbase + REGB + 0x0016)
-#define GMR (_dprbase + REGB + 0x0040)
-#define OR0 (_dprbase + REGB + 0x0054)
-#define BR0 (_dprbase + REGB + 0x0050)
-
-#define OR1 (_dprbase + REGB + 0x0064)
-#define BR1 (_dprbase + REGB + 0x0060)
-
-#define OR2 (_dprbase + REGB + 0x0074)
-#define BR2 (_dprbase + REGB + 0x0070)
-
-#define OR3 (_dprbase + REGB + 0x0084)
-#define BR3 (_dprbase + REGB + 0x0080)
-
-#define OR4 (_dprbase + REGB + 0x0094)
-#define BR4 (_dprbase + REGB + 0x0090)
-
-#define OR5 (_dprbase + REGB + 0x00A4)
-#define BR5 (_dprbase + REGB + 0x00A0)
-
-#define OR6 (_dprbase + REGB + 0x00b4)
-#define BR6 (_dprbase + REGB + 0x00b0)
-
-#define OR7 (_dprbase + REGB + 0x00c4)
-#define BR7 (_dprbase + REGB + 0x00c0)
-
-#define MCR (_dprbase + REGB + 0x0000)
-#define AVR (_dprbase + REGB + 0x0008)
-
-#define SYPCR (_dprbase + REGB + 0x0022)
-
-#define PLLCR (_dprbase + REGB + 0x0010)
-#define CLKOCR (_dprbase + REGB + 0x000C)
-#define CDVCR (_dprbase + REGB + 0x0014)
-
-#define BKAR (_dprbase + REGB + 0x0030)
-#define BKCR (_dprbase + REGB + 0x0034)
-#define SWIV (_dprbase + REGB + 0x0023)
-#define PICR (_dprbase + REGB + 0x0026)
-#define PITR (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR 0x00000000
-#define SIM_OR_MASK 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK 0x20000000
-#define SIM_BR0_MASK 0x00000001
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK 0x10000000
-#define SIM_BR1_MASK 0x00000001
-
-#define MCU_SIM_MBAR_ADRS 0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK 0xfffff000
-#define MCU_SIM_MBAR_AS_MASK 0x00000001
-
-#define MCU_SIM_PEPAR 0x00B4
-
-#define MCU_DISABLE_INTRPTS 0x2700
-#define MCU_SIM_AVR 0x00
-
-#define MCU_SIM_MCR 0x00005cff
-
-#define MCU_SIM_CLKOCR 0x00
-#define MCU_SIM_PLLCR 0x8000
-#define MCU_SIM_CDVCR 0x0000
-
-#define MCU_SIM_SYPCR 0x0000
-#define MCU_SIM_SWIV 0x00
-#define MCU_SIM_PICR 0x0000
-#define MCU_SIM_PITR 0x0000
-
-
-#include <asm/m68360_regs.h>
-
-
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
- .text
-_start:
-_stext:
- nop
- ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
- /* We should not need to setup the boot stack the reset should do it. */
- movea.l #RAMEND, %sp /* set up stack at the end of DRAM:*/
-
-
-set_mbar_register:
- moveq.l #0x07, %d1 /* Setup MBAR */
- movec %d1, %dfc
-
- lea.l MCU_SIM_MBAR_ADRS, %a0
- move.l #_dprbase, %d0
- andi.l #MCU_SIM_MBAR_BA_MASK, %d0
- ori.l #MCU_SIM_MBAR_AS_MASK, %d0
- moves.l %d0, %a0@
-
- moveq.l #0x05, %d1
- movec.l %d1, %dfc
-
- /* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
- /* Set Module Configuration Register */
- move.l #MCU_SIM_MCR, MCR
-
- /* to do: Determine cause of reset */
-
- /*
- * configure system clock MC68360 p. 6-40
- * (value +1)*osc/128 = system clock
- * or
- * (value + 1)*osc = system clock
- * You do not need to divide the oscillator by 128 unless you want to.
- */
-set_sim_clock:
- move.w #MCU_SIM_PLLCR, PLLCR
- move.b #MCU_SIM_CLKOCR, CLKOCR
- move.w #MCU_SIM_CDVCR, CDVCR
-
- /* Wait for the PLL to settle */
- move.w #16384, %d0
-pll_settle_wait:
- subi.w #1, %d0
- bne pll_settle_wait
-
- /* Setup the system protection register, and watchdog timer register */
- move.b #MCU_SIM_SWIV, SWIV
- move.w #MCU_SIM_PICR, PICR
- move.w #MCU_SIM_PITR, PITR
- move.w #MCU_SIM_SYPCR, SYPCR
-
- /* Clear DPRAM - system + parameter */
- movea.l #_dprbase, %a0
- movea.l #_dprbase+0x2000, %a1
-
- /* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
- movel #0, %a0@+
- cmpal %a0, %a1
- bhi clear_dpram
-
-configure_memory_controller:
- /* Set up Global Memory Register (GMR) */
- move.l #MCU_SIM_GMR, %d0
- move.l %d0, GMR
-
-configure_chip_select_0:
- move.l #0x00400000, %d0
- subq.l #0x01, %d0
- eori.l #SIM_OR_MASK, %d0
- ori.l #SIM_OR0_MASK, %d0
- move.l %d0, OR0
-
- move.l #__rom_start, %d0
- ori.l #SIM_BR0_MASK, %d0
- move.l %d0, BR0
-
- move.l #0x0, BR1
- move.l #0x0, BR2
- move.l #0x0, BR3
- move.l #0x0, BR4
- move.l #0x0, BR5
- move.l #0x0, BR6
- move.l #0x0, BR7
-
- move.w #MCU_SIM_PEPAR, PEPAR
-
- /* point to vector table: */
- move.l #_romvec, %a0
- move.l #_ramvec, %a1
-copy_vectors:
- move.l %a0@, %d0
- move.l %d0, %a1@
- move.l %a0@, %a1@
- addq.l #0x04, %a0
- addq.l #0x04, %a1
- cmp.l #_start, %a0
- blt copy_vectors
-
- move.l #_ramvec, %a1
- movec %a1, %vbr
-
-
- /* Copy data segment from ROM to RAM */
- moveal #_etext, %a0
- moveal #_sdata, %a1
- moveal #_edata, %a2
-
- /* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
- move.l %a0@, %d0
- addq.l #0x04, %a0
- move.l %d0, %a1@
- addq.l #0x04, %a1
- cmp.l #_edata, %a1
- blt LD1
-
- moveal #__bss_start, %a0
- moveal #__bss_stop, %a1
-
- /* Copy 0 to %a0 until %a0 == %a1 */
-L1:
- movel #0, %a0@+
- cmpal %a0, %a1
- bhi L1
-
-load_quicc:
- move.l #_dprbase, _quicc_base
-
-store_ram_size:
- /* Set ram size information */
- move.l #_sdata, _rambase
- move.l #__bss_stop, _ramstart
- move.l #RAMEND, %d0
- sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
- move.l %d0, _ramend /* Different from RAMEND.*/
-
- pea 0
- pea env
- pea %sp@(4)
- pea 0
-
- lea init_thread_union, %a2
- lea 0x2000(%a2), %sp
-
-lp:
- jsr start_kernel
-
-_exit:
- jmp _exit
-
-
- .data
- .align 4
-env:
- .long 0
-_quicc_base:
- .long 0
-_periph_base:
- .long 0
-_ramvec:
- .long 0
-_rambase:
- .long 0
-_ramstart:
- .long 0
-_ramend:
- .long 0
-_dprbase:
- .long 0xffffe000
-
-
- .text
-
- /*
- * These are the exception vectors at boot up, they are copied into RAM
- * and then overwritten as needed.
- */
-
-.section ".data..initvect","awx"
- .long RAMEND /* Reset: Initial Stack Pointer - 0. */
- .long _start /* Reset: Initial Program Counter - 1. */
- .long buserr /* Bus Error - 2. */
- .long trap /* Address Error - 3. */
- .long trap /* Illegal Instruction - 4. */
- .long trap /* Divide by zero - 5. */
- .long trap /* CHK, CHK2 Instructions - 6. */
- .long trap /* TRAPcc, TRAPV Instructions - 7. */
- .long trap /* Privilege Violation - 8. */
- .long trap /* Trace - 9. */
- .long trap /* Line 1010 Emulator - 10. */
- .long trap /* Line 1111 Emualtor - 11. */
- .long trap /* Harware Breakpoint - 12. */
- .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
- .long trap /* Format Error - 14. */
- .long trap /* Uninitialized Interrupt - 15. */
- .long trap /* (Unassigned, Reserver) - 16. */
- .long trap /* (Unassigned, Reserver) - 17. */
- .long trap /* (Unassigned, Reserver) - 18. */
- .long trap /* (Unassigned, Reserver) - 19. */
- .long trap /* (Unassigned, Reserver) - 20. */
- .long trap /* (Unassigned, Reserver) - 21. */
- .long trap /* (Unassigned, Reserver) - 22. */
- .long trap /* (Unassigned, Reserver) - 23. */
- .long trap /* Spurious Interrupt - 24. */
- .long trap /* Level 1 Interrupt Autovector - 25. */
- .long trap /* Level 2 Interrupt Autovector - 26. */
- .long trap /* Level 3 Interrupt Autovector - 27. */
- .long trap /* Level 4 Interrupt Autovector - 28. */
- .long trap /* Level 5 Interrupt Autovector - 29. */
- .long trap /* Level 6 Interrupt Autovector - 30. */
- .long trap /* Level 7 Interrupt Autovector - 31. */
- .long system_call /* Trap Instruction Vectors 0 - 32. */
- .long trap /* Trap Instruction Vectors 1 - 33. */
- .long trap /* Trap Instruction Vectors 2 - 34. */
- .long trap /* Trap Instruction Vectors 3 - 35. */
- .long trap /* Trap Instruction Vectors 4 - 36. */
- .long trap /* Trap Instruction Vectors 5 - 37. */
- .long trap /* Trap Instruction Vectors 6 - 38. */
- .long trap /* Trap Instruction Vectors 7 - 39. */
- .long trap /* Trap Instruction Vectors 8 - 40. */
- .long trap /* Trap Instruction Vectors 9 - 41. */
- .long trap /* Trap Instruction Vectors 10 - 42. */
- .long trap /* Trap Instruction Vectors 11 - 43. */
- .long trap /* Trap Instruction Vectors 12 - 44. */
- .long trap /* Trap Instruction Vectors 13 - 45. */
- .long trap /* Trap Instruction Vectors 14 - 46. */
- .long trap /* Trap Instruction Vectors 15 - 47. */
- .long 0 /* (Reserved for Coprocessor) - 48. */
- .long 0 /* (Reserved for Coprocessor) - 49. */
- .long 0 /* (Reserved for Coprocessor) - 50. */
- .long 0 /* (Reserved for Coprocessor) - 51. */
- .long 0 /* (Reserved for Coprocessor) - 52. */
- .long 0 /* (Reserved for Coprocessor) - 53. */
- .long 0 /* (Reserved for Coprocessor) - 54. */
- .long 0 /* (Reserved for Coprocessor) - 55. */
- .long 0 /* (Reserved for Coprocessor) - 56. */
- .long 0 /* (Reserved for Coprocessor) - 57. */
- .long 0 /* (Reserved for Coprocessor) - 58. */
- .long 0 /* (Unassigned, Reserved) - 59. */
- .long 0 /* (Unassigned, Reserved) - 60. */
- .long 0 /* (Unassigned, Reserved) - 61. */
- .long 0 /* (Unassigned, Reserved) - 62. */
- .long 0 /* (Unassigned, Reserved) - 63. */
- /* The assignment of these vectors to the CPM is */
- /* dependent on the configuration of the CPM vba */
- /* fields. */
- .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
- .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
- .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
- .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
- .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
- .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
- .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
- .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
- .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
- .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
- .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
- .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
- .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
- .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
- .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
- .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
- .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
- .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
- .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
- .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
- .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
- .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
- .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
- .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
- .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
- .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
- .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
- .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
- .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
- .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
- .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
- .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
- /* I don't think anything uses the vectors after here. */
- .long 0 /* (User-Defined Vectors 34) - 96. */
- .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
- .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
- .long 0,0,0 /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
projects / firefly-linux-kernel-4.4.55.git / blobdiff