select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select ARCH_WANT_FRAME_POINTERS
+ select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARM_AMBA
select ARM_ARCH_TIMER
select ARM_GIC
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
+ select HAVE_ARCH_HARDENED_USERCOPY
+ select HAVE_ARCH_HUGE_VMAP
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
select HAVE_ARCH_KGDB
+ select HAVE_ARCH_MMAP_RND_BITS
+ select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_GENERIC_DMA_COHERENT
select HAVE_HW_BREAKPOINT if PERF_EVENTS
+ select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_MEMBLOCK
select HAVE_PATA_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
+ select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RCU_TABLE_FREE
select HAVE_SYSCALL_TRACEPOINTS
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES if HAVE_KPROBES
select IOMMU_DMA if IOMMU_SUPPORT
select IRQ_DOMAIN
select IRQ_FORCED_THREADING
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select HAVE_CONTEXT_TRACKING
+ select HAVE_ARM_SMCCC
help
ARM 64-bit (AArch64) Linux support.
config MMU
def_bool y
+config ARCH_MMAP_RND_BITS_MIN
+ default 14 if ARM64_64K_PAGES
+ default 16 if ARM64_16K_PAGES
+ default 18
+
+# max bits determined by the following formula:
+# VA_BITS - PAGE_SHIFT - 3
+config ARCH_MMAP_RND_BITS_MAX
+ default 19 if ARM64_VA_BITS=36
+ default 24 if ARM64_VA_BITS=39
+ default 27 if ARM64_VA_BITS=42
+ default 30 if ARM64_VA_BITS=47
+ default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
+ default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
+ default 33 if ARM64_VA_BITS=48
+ default 14 if ARM64_64K_PAGES
+ default 16 if ARM64_16K_PAGES
+ default 18
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+ default 7 if ARM64_64K_PAGES
+ default 9 if ARM64_16K_PAGES
+ default 11
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+ default 16
+
config NO_IOPORT_MAP
def_bool y if !PCI
+config ILLEGAL_POINTER_VALUE
+ hex
+ default 0xdead000000000000
+
config STACKTRACE_SUPPORT
def_bool y
bool "Cortex-A53: 843419: A load or store might access an incorrect address"
depends on MODULES
default y
+ select ARM64_MODULE_CMODEL_LARGE
help
This option builds kernel modules using the large memory model in
order to avoid the use of the ADRP instruction, which can cause
source kernel/Kconfig.preempt
source kernel/Kconfig.hz
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+ def_bool y
+
config ARCH_HAS_HOLES_MEMORYMODEL
def_bool y if SPARSEMEM
config SYS_SUPPORTS_HUGETLBFS
def_bool y
-config ARCH_WANT_GENERAL_HUGETLB
- def_bool y
-
config ARCH_WANT_HUGE_PMD_SHARE
def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
If unsure, say Y
endif
+config ARM64_SW_TTBR0_PAN
+ bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
+ help
+ Enabling this option prevents the kernel from accessing
+ user-space memory directly by pointing TTBR0_EL1 to a reserved
+ zeroed area and reserved ASID. The user access routines
+ restore the valid TTBR0_EL1 temporarily.
+
menu "ARMv8.1 architectural features"
config ARM64_HW_AFDBM
endmenu
+config ARM64_UAO
+ bool "Enable support for User Access Override (UAO)"
+ default y
+ help
+ User Access Override (UAO; part of the ARMv8.2 Extensions)
+ causes the 'unprivileged' variant of the load/store instructions to
+ be overriden to be privileged.
+
+ This option changes get_user() and friends to use the 'unprivileged'
+ variant of the load/store instructions. This ensures that user-space
+ really did have access to the supplied memory. When addr_limit is
+ set to kernel memory the UAO bit will be set, allowing privileged
+ access to kernel memory.
+
+ Choosing this option will cause copy_to_user() et al to use user-space
+ memory permissions.
+
+ The feature is detected at runtime, the kernel will use the
+ regular load/store instructions if the cpu does not implement the
+ feature.
+
+config ARM64_MODULE_CMODEL_LARGE
+ bool
+
+config ARM64_MODULE_PLTS
+ bool
+ select ARM64_MODULE_CMODEL_LARGE
+ select HAVE_MOD_ARCH_SPECIFIC
+
+config RELOCATABLE
+ bool
+ help
+ This builds the kernel as a Position Independent Executable (PIE),
+ which retains all relocation metadata required to relocate the
+ kernel binary at runtime to a different virtual address than the
+ address it was linked at.
+ Since AArch64 uses the RELA relocation format, this requires a
+ relocation pass at runtime even if the kernel is loaded at the
+ same address it was linked at.
+
+config RANDOMIZE_BASE
+ bool "Randomize the address of the kernel image"
+ select ARM64_MODULE_PLTS if MODULES
+ select RELOCATABLE
+ help
+ Randomizes the virtual address at which the kernel image is
+ loaded, as a security feature that deters exploit attempts
+ relying on knowledge of the location of kernel internals.
+
+ It is the bootloader's job to provide entropy, by passing a
+ random u64 value in /chosen/kaslr-seed at kernel entry.
+
+ When booting via the UEFI stub, it will invoke the firmware's
+ EFI_RNG_PROTOCOL implementation (if available) to supply entropy
+ to the kernel proper. In addition, it will randomise the physical
+ location of the kernel Image as well.
+
+ If unsure, say N.
+
+config RANDOMIZE_MODULE_REGION_FULL
+ bool "Randomize the module region independently from the core kernel"
+ depends on RANDOMIZE_BASE && !DYNAMIC_FTRACE
+ default y
+ help
+ Randomizes the location of the module region without considering the
+ location of the core kernel. This way, it is impossible for modules
+ to leak information about the location of core kernel data structures
+ but it does imply that function calls between modules and the core
+ kernel will need to be resolved via veneers in the module PLT.
+
+ When this option is not set, the module region will be randomized over
+ a limited range that contains the [_stext, _etext] interval of the
+ core kernel, so branch relocations are always in range.
+
endmenu
menu "Boot options"
+config ARM64_ACPI_PARKING_PROTOCOL
+ bool "Enable support for the ARM64 ACPI parking protocol"
+ depends on ACPI
+ help
+ Enable support for the ARM64 ACPI parking protocol. If disabled
+ the kernel will not allow booting through the ARM64 ACPI parking
+ protocol even if the corresponding data is present in the ACPI
+ MADT table.
+
config CMDLINE
string "Default kernel command string"
default ""
entering them here. As a minimum, you should specify the the
root device (e.g. root=/dev/nfs).
+choice
+ prompt "Kernel command line type" if CMDLINE != ""
+ default CMDLINE_FROM_BOOTLOADER
+
+config CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader. If
+ the boot loader doesn't provide any, the default kernel command
+ string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+ bool "Extend bootloader kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to the default kernel command string.
+
config CMDLINE_FORCE
bool "Always use the default kernel command string"
help
loader passes other arguments to the kernel.
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.
+endchoice
config EFI_STUB
bool
However, even with this option, the resultant kernel should
continue to boot on existing non-UEFI platforms.
+config BUILD_ARM64_APPENDED_DTB_IMAGE
+ bool "Build a concatenated Image.gz/dtb by default"
+ depends on OF
+ help
+ Enabling this option will cause a concatenated Image.gz and list of
+ DTBs to be built by default (instead of a standalone Image.gz.)
+ The image will built in arch/arm64/boot/Image.gz-dtb
+
+config BUILD_ARM64_APPENDED_DTB_IMAGE_NAMES
+ string "Default dtb names"
+ depends on BUILD_ARM64_APPENDED_DTB_IMAGE
+ help
+ Space separated list of names of dtbs to append when
+ building a concatenated Image.gz-dtb.
+
endmenu
menu "Userspace binary formats"
source "kernel/power/Kconfig"
+config ARCH_HIBERNATION_POSSIBLE
+ def_bool y
+ depends on CPU_PM
+
+config ARCH_HIBERNATION_HEADER
+ def_bool y
+ depends on HIBERNATION
+
config ARCH_SUSPEND_POSSIBLE
def_bool y