#if defined(CONFIG_SPIM_RK29)
#include "../../../drivers/spi/rk29_spim.h"
#endif
+#if defined(CONFIG_ANDROID_TIMED_GPIO)
+#include "../../../drivers/staging/android/timed_gpio.h"
+#endif
+
+#define RK30_FB0_MEM_SIZE 8*SZ_1M
+
+#ifdef CONFIG_VIDEO_RK
+/*---------------- Camera Sensor Macro Define Begin ------------------------*/
+/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
+#define CONFIG_SENSOR_0 RK_CAM_SENSOR_OV2659//RK_CAM_SENSOR_OV5642 /* back camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_0 0x60//0x78
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 1
+#define CONFIG_SENSOR_CIF_INDEX_0 0
+#define CONFIG_SENSOR_ORIENTATION_0 90
+#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_0 30000
+
+#define CONFIG_SENSOR_1 RK_CAM_SENSOR_OV2659 /* front camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_1 0x60
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 1
+#define CONFIG_SENSOR_CIF_INDEX_1 1
+#define CONFIG_SENSOR_ORIENTATION_1 270
+#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_1 30000
+
+#define CONFIG_USE_CIF_0 1
+#define CONFIG_USE_CIF_1 0
+#endif //#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Configuration Macro End------------------------*/
+#include "../../../drivers/media/video/rk_camera.c"
+/*---------------- Camera Sensor Macro Define End ---------*/
+
+#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY
+#ifdef CONFIG_VIDEO_RK_WORK_IPP
+#define MEM_CAMIPP_SIZE PMEM_CAMIPP_NECESSARY
+#else
+#define MEM_CAMIPP_SIZE 0
+#endif
+/*****************************************************************************************
+ * camera devices
+ * author: ddl@rock-chips.com
+ *****************************************************************************************/
+#ifdef CONFIG_VIDEO_RK
+#define CONFIG_SENSOR_POWER_IOCTL_USR 0
+#define CONFIG_SENSOR_RESET_IOCTL_USR 0
+#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
+#define CONFIG_SENSOR_FLASH_IOCTL_USR 0
+
+#if CONFIG_SENSOR_POWER_IOCTL_USR
+static int sensor_power_usr_cb (struct rkcamera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_RESET_IOCTL_USR
+static int sensor_reset_usr_cb (struct rkcamera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+static int sensor_powerdown_usr_cb (struct rkcamera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_FLASH_IOCTL_USR
+static int sensor_flash_usr_cb (struct rkcamera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!";
+}
+#endif
+
+static struct rkcamera_platform_ioctl_cb sensor_ioctl_cb = {
+ #if CONFIG_SENSOR_POWER_IOCTL_USR
+ .sensor_power_cb = sensor_power_usr_cb,
+ #else
+ .sensor_power_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_RESET_IOCTL_USR
+ .sensor_reset_cb = sensor_reset_usr_cb,
+ #else
+ .sensor_reset_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+ .sensor_powerdown_cb = sensor_powerdown_usr_cb,
+ #else
+ .sensor_powerdown_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_FLASH_IOCTL_USR
+ .sensor_flash_cb = sensor_flash_usr_cb,
+ #else
+ .sensor_flash_cb = NULL,
+ #endif
+};
+static struct reginfo_t rk_init_data_sensor_reg_0[] =
+{
+ {0x3000, 0x0f,0,0},
+ {0x3001, 0xff,0,0},
+ {0x3002, 0xff,0,0},
+ //{0x0100, 0x01}, //software sleep : Sensor vsync singal may not output if haven't sleep the sensor when transfer the array
+ {0x3633, 0x3d,0,0},
+ {0x3620, 0x02,0,0},
+ {0x3631, 0x11,0,0},
+ {0x3612, 0x04,0,0},
+ {0x3630, 0x20,0,0},
+ {0x4702, 0x02,0,0},
+ {0x370c, 0x34,0,0},
+ {0x3004, 0x10,0,0},
+ {0x3005, 0x18,0,0},
+ {0x3800, 0x00,0,0},
+ {0x3801, 0x00,0,0},
+ {0x3802, 0x00,0,0},
+ {0x3803, 0x00,0,0},
+ {0x3804, 0x06,0,0},
+ {0x3805, 0x5f,0,0},
+ {0x3806, 0x04,0,0},
+ {0x3807, 0xb7,0,0},
+ {0x3808, 0x03,0,0},
+ {0x3809, 0x20,0,0},
+ {0x380a, 0x02,0,0},
+ {0x380b, 0x58,0,0},
+ {0x380c, 0x05,0,0},
+ {0x380d, 0x14,0,0},
+ {0x380e, 0x02,0,0},
+ {0x380f, 0x68,0,0},
+ {0x3811, 0x08,0,0},
+ {0x3813, 0x02,0,0},
+ {0x3814, 0x31,0,0},
+ {0x3815, 0x31,0,0},
+ {0x3a02, 0x02,0,0},
+ {0x3a03, 0x68,0,0},
+ {0x3a08, 0x00,0,0},
+ {0x3a09, 0x5c,0,0},
+ {0x3a0a, 0x00,0,0},
+ {0x3a0b, 0x4d,0,0},
+ {0x3a0d, 0x08,0,0},
+ {0x3a0e, 0x06,0,0},
+ {0x3a14, 0x02,0,0},
+ {0x3a15, 0x28,0,0},
+ {0x4708, 0x01,0,0},
+ {0x3623, 0x00,0,0},
+ {0x3634, 0x76,0,0},
+ {0x3701, 0x44,0,0},
+ {0x3702, 0x18,0,0},
+ {0x3703, 0x24,0,0},
+ {0x3704, 0x24,0,0},
+ {0x3705, 0x0c,0,0},
+ {0x3820, 0x81,0,0},
+ {0x3821, 0x01,0,0},
+ {0x370a, 0x52,0,0},
+ {0x4608, 0x00,0,0},
+ {0x4609, 0x80,0,0},
+ {0x4300, 0x32,0,0},
+ {0x5086, 0x02,0,0},
+ {0x5000, 0xfb,0,0},
+ {0x5001, 0x1f,0,0},
+ {0x5002, 0x00,0,0},
+ {0x5025, 0x0e,0,0},
+ {0x5026, 0x18,0,0},
+ {0x5027, 0x34,0,0},
+ {0x5028, 0x4c,0,0},
+ {0x5029, 0x62,0,0},
+ {0x502a, 0x74,0,0},
+ {0x502b, 0x85,0,0},
+ {0x502c, 0x92,0,0},
+ {0x502d, 0x9e,0,0},
+ {0x502e, 0xb2,0,0},
+ {0x502f, 0xc0,0,0},
+ {0x5030, 0xcc,0,0},
+ {0x5031, 0xe0,0,0},
+ {0x5032, 0xee,0,0},
+ {0x5033, 0xf6,0,0},
+ {0x5034, 0x11,0,0},
+ {0x5070, 0x1c,0,0},
+ {0x5071, 0x5b,0,0},
+ {0x5072, 0x05,0,0},
+ {0x5073, 0x20,0,0},
+ {0x5074, 0x94,0,0},
+ {0x5075, 0xb4,0,0},
+ {0x5076, 0xb4,0,0},
+ {0x5077, 0xaf,0,0},
+ {0x5078, 0x05,0,0},
+ {0x5079, 0x98,0,0},
+ {0x507a, 0x21,0,0},
+ {0x5035, 0x6a,0,0},
+ {0x5036, 0x11,0,0},
+ {0x5037, 0x92,0,0},
+ {0x5038, 0x21,0,0},
+
+ {0x5039, 0xe1,0,0},
+ {0x503a, 0x01,0,0},
+ {0x503c, 0x05,0,0},
+ {0x503d, 0x08,0,0},
+ {0x503e, 0x08,0,0},
+ {0x503f, 0x64,0,0},
+ {0x5040, 0x58,0,0},
+ {0x5041, 0x2a,0,0},
+ {0x5042, 0xc5,0,0},
+ {0x5043, 0x2e,0,0},
+ {0x5044, 0x3a,0,0},
+ {0x5045, 0x3c,0,0},
+ {0x5046, 0x44,0,0},
+ {0x5047, 0xf8,0,0},
+ {0x5048, 0x08,0,0},
+ {0x5049, 0x70,0,0},
+ {0x504a, 0xf0,0,0},
+ {0x504b, 0xf0,0,0},
+ {0x500c, 0x03,0,0},
+ {0x500d, 0x20,0,0},
+ {0x500e, 0x02,0,0},
+ {0x500f, 0x5c,0,0},
+ {0x5010, 0x48,0,0},
+ {0x5011, 0x00,0,0},
+ {0x5012, 0x66,0,0},
+ {0x5013, 0x03,0,0},
+ {0x5014, 0x30,0,0},
+ {0x5015, 0x02,0,0},
+ {0x5016, 0x7c,0,0},
+ {0x5017, 0x40,0,0},
+ {0x5018, 0x00,0,0},
+ {0x5019, 0x66,0,0},
+ {0x501a, 0x03,0,0},
+ {0x501b, 0x10,0,0},
+ {0x501c, 0x02,0,0},
+ {0x501d, 0x7c,0,0},
+ {0x501e, 0x3a,0,0},
+ {0x501f, 0x00,0,0},
+ {0x5020, 0x66,0,0},
+ {0x506e, 0x44,0,0},
+ {0x5064, 0x08,0,0},
+ {0x5065, 0x10,0,0},
+ {0x5066, 0x12,0,0},
+ {0x5067, 0x02,0,0},
+ {0x506c, 0x08,0,0},
+ {0x506d, 0x10,0,0},
+ {0x506f, 0xa6,0,0},
+ {0x5068, 0x08,0,0},
+
+
+ {0x5069, 0x10,0,0},
+ {0x506a, 0x04,0,0},
+ {0x506b, 0x12,0,0},
+ {0x507e, 0x40,0,0},
+ {0x507f, 0x20,0,0},
+ {0x507b, 0x02,0,0},
+ {0x507a, 0x01,0,0},
+ {0x5084, 0x0c,0,0},
+ {0x5085, 0x3e,0,0},
+ {0x5005, 0x80,0,0},
+ {0x3a0f, 0x30,0,0},
+ {0x3a10, 0x28,0,0},
+ {0x3a1b, 0x32,0,0},
+ {0x3a1e, 0x26,0,0},
+ {0x3a11, 0x60,0,0},
+ {0x3a1f, 0x14,0,0},
+ {0x5060, 0x69,0,0},
+ {0x5061, 0x7d,0,0},
+ {0x5062, 0x7d,0,0},
+ {0x5063, 0x69,0,0},
+ {0x3004, 0x20,0,0},
+ {0x0100, 0x01,0,0},
+ {0x0000, 0x00,0,0}
+ };
+static struct reginfo_t rk_init_data_sensor_winseqreg_0[] ={
+ {0x0000, 0x00,0,0}
+ };
+static rk_sensor_user_init_data_s rk_init_data_sensor_0 =
+{
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_0,
+ .rk_sensor_init_winseq = NULL,//rk_init_data_sensor_winseqreg_0,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_0) / sizeof(struct reginfo_t),
+
+};
+static rk_sensor_user_init_data_s* rk_init_data_sensor_0_p = &rk_init_data_sensor_0;
+static rk_sensor_user_init_data_s* rk_init_data_sensor_1_p = NULL;
+#include "../../../drivers/media/video/rk_camera.c"
+
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_GT8XX)
+#define TOUCH_RESET_PIN RK30_PIN4_PD0
+#define TOUCH_PWR_PIN INVALID_GPIO
+int goodix_init_platform_hw(void)
+{
+ int ret;
+ printk("goodix_init_platform_hw\n");
+ if(TOUCH_PWR_PIN != INVALID_GPIO)
+ {
+ ret = gpio_request(TOUCH_PWR_PIN, "goodix power pin");
+ if(ret != 0){
+ gpio_free(TOUCH_PWR_PIN);
+ printk("goodix power error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_PWR_PIN, 0);
+ gpio_set_value(TOUCH_PWR_PIN,GPIO_LOW);
+ msleep(100);
+ }
+
+ if(TOUCH_RESET_PIN != INVALID_GPIO)
+ {
+ ret = gpio_request(TOUCH_RESET_PIN, "goodix reset pin");
+ if(ret != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("goodix gpio_request error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ msleep(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(500);
+ }
+ return 0;
+}
+
+struct goodix_platform_data goodix_info = {
+ .model= 8105,
+ .irq_pin = RK30_PIN4_PC2,
+ .rest_pin = TOUCH_RESET_PIN,
+ .init_platform_hw = goodix_init_platform_hw,
+};
+#endif
/*****************************************************************************************
* author: hhb@rock-chips.com
*****************************************************************************************/
#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_TSLIB_SPI)
-#define XPT2046_GPIO_INT RK30_PIN6_PB7
+#define XPT2046_GPIO_INT RK30_PIN4_PC2
#define DEBOUNCE_REPTIME 3
.debounce_rep = DEBOUNCE_REPTIME,
.debounce_tol = 20,
.gpio_pendown = XPT2046_GPIO_INT,
- .pendown_iomux_name = GPIO6B7_TESTCLOCKOUT_NAME,
- .pendown_iomux_mode = GPIO6B_GPIO6B7,
+ .pendown_iomux_name = GPIO4C2_SMCDATA2_TRACEDATA2_NAME,
+ .pendown_iomux_mode = GPIO4C_GPIO4C2,
.touch_virtualkey_length = 60,
.penirq_recheck_delay_usecs = 1,
#if defined(CONFIG_TOUCHSCREEN_480X800)
.debounce_rep = DEBOUNCE_REPTIME,
.debounce_tol = 20,
.gpio_pendown = XPT2046_GPIO_INT,
- .pendown_iomux_name = GPIO6B7_TESTCLOCKOUT_NAME,
- .pendown_iomux_mode = GPIO6B_GPIO6B7,
+ .pendown_iomux_name = GPIO4C2_SMCDATA2_TRACEDATA2_NAME,
+ .pendown_iomux_mode = GPIO4C_GPIO4C2,
.touch_virtualkey_length = 60,
.penirq_recheck_delay_usecs = 1,
{
.modalias = "xpt2046_ts",
.chip_select = 1,// 2,
- .max_speed_hz = 1 * 1000 * 1000,/* (max sample rate @ 3V) * (cmd + data + overhead) */
+ .max_speed_hz = 1 * 1000 * 800,/* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.irq = XPT2046_GPIO_INT,
.platform_data = &xpt2046_info,
};
+/***********************************************************
+* rk30 backlight
+************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+#define PWM_ID 0
+#define PWM_MUX_NAME GPIO0A3_PWM0_NAME
+#define PWM_MUX_MODE GPIO0A_PWM0
+#define PWM_MUX_MODE_GPIO GPIO0A_GPIO0A3
+#define PWM_GPIO RK30_PIN0_PA3
+#define PWM_EFFECT_VALUE 1
+
+#define LCD_DISP_ON_PIN
+
+#ifdef LCD_DISP_ON_PIN
+//#define BL_EN_MUX_NAME GPIOF34_UART3_SEL_NAME
+//#define BL_EN_MUX_MODE IOMUXB_GPIO1_B34
+
+#define BL_EN_PIN RK30_PIN6_PB3
+#define BL_EN_VALUE GPIO_HIGH
+#endif
+static int rk29_backlight_io_init(void)
+{
+ int ret = 0;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+#ifdef LCD_DISP_ON_PIN
+ // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
+
+ ret = gpio_request(BL_EN_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(BL_EN_PIN);
+ }
+
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+ int ret = 0;
+#ifdef LCD_DISP_ON_PIN
+ gpio_free(BL_EN_PIN);
+#endif
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ return ret;
+}
+
+static int rk29_backlight_pwm_suspend(void)
+{
+ int ret = 0;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ if (gpio_request(PWM_GPIO, NULL)) {
+ printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
+ return -1;
+ }
+ gpio_direction_output(PWM_GPIO, GPIO_LOW);
+#ifdef LCD_DISP_ON_PIN
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_pwm_resume(void)
+{
+ gpio_free(PWM_GPIO);
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+#ifdef LCD_DISP_ON_PIN
+ msleep(30);
+ gpio_direction_output(BL_EN_PIN, 1);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return 0;
+}
+
+static struct rk29_bl_info rk29_bl_info = {
+ .pwm_id = PWM_ID,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+ .pwm_suspend = rk29_backlight_pwm_suspend,
+ .pwm_resume = rk29_backlight_pwm_resume,
+};
+
+
+static struct platform_device rk29_device_backlight = {
+ .name = "rk29_backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_bl_info,
+ }
+};
+
+#endif
+
+/*MMA8452 gsensor*/
+#if defined (CONFIG_GS_MMA8452)
+#define MMA8452_INT_PIN RK30_PIN4_PC0
+
+static int mma8452_init_platform_hw(void)
+{
+ rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
+
+ if(gpio_request(MMA8452_INT_PIN,NULL) != 0){
+ gpio_free(MMA8452_INT_PIN);
+ printk("mma8452_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_pull_updown(MMA8452_INT_PIN, 1);
+ return 0;
+}
+
+
+static struct mma8452_platform_data mma8452_info = {
+ .model= 8452,
+ .swap_xy = 0,
+ .swap_xyz = 1,
+ .init_platform_hw= mma8452_init_platform_hw,
+ .orientation = { -1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+static struct akm8975_platform_data akm8975_info =
+{
+ .m_layout =
+ {
+ {
+ {1, 0, 0 },
+ {0, -1, 0 },
+ {0, 0, -1 },
+ },
+
+ {
+ {1, 0, 0 },
+ {0, 1, 0 },
+ {0, 0, 1 },
+ },
+
+ {
+ {1, 0, 0 },
+ {0, 1, 0 },
+ {0, 0, 1 },
+ },
+
+ {
+ {1, 0, 0 },
+ {0, 1, 0 },
+ {0, 0, 1 },
+ },
+ }
+
+};
+
+#endif
+
+#if defined(CONFIG_GYRO_L3G4200D)
+
+#include <linux/l3g4200d.h>
+#define L3G4200D_INT_PIN RK30_PIN4_PC3
+
+static int l3g4200d_init_platform_hw(void)
+{
+ if (gpio_request(L3G4200D_INT_PIN, NULL) != 0) {
+ gpio_free(L3G4200D_INT_PIN);
+ printk("%s: request l3g4200d int pin error\n", __func__);
+ return -EIO;
+ }
+ gpio_pull_updown(L3G4200D_INT_PIN, 1);
+ return 0;
+}
+
+static struct l3g4200d_platform_data l3g4200d_info = {
+ .fs_range = 1,
+
+ .axis_map_x = 0,
+ .axis_map_y = 1,
+ .axis_map_z = 2,
+
+ .negate_x = 1,
+ .negate_y = 1,
+ .negate_z = 0,
+
+ .init = l3g4200d_init_platform_hw,
+};
+
+#endif
+
+#ifdef CONFIG_LS_CM3217
+
+#define CM3217_POWER_PIN INVALID_GPIO
+#define CM3217_IRQ_PIN INVALID_GPIO
+static int cm3217_init_hw(void)
+{
+#if 0
+ if (gpio_request(CM3217_POWER_PIN, NULL) != 0) {
+ gpio_free(CM3217_POWER_PIN);
+ printk("%s: request cm3217 power pin error\n", __func__);
+ return -EIO;
+ }
+ gpio_pull_updown(CM3217_POWER_PIN, PullDisable);
+
+ if (gpio_request(CM3217_IRQ_PIN, NULL) != 0) {
+ gpio_free(CM3217_IRQ_PIN);
+ printk("%s: request cm3217 int pin error\n", __func__);
+ return -EIO;
+ }
+ gpio_pull_updown(CM3217_IRQ_PIN, PullDisable);
+#endif
+ return 0;
+}
+
+static void cm3217_exit_hw(void)
+{
+#if 0
+ gpio_free(CM3217_POWER_PIN);
+ gpio_free(CM3217_IRQ_PIN);
+#endif
+ return;
+}
+
+struct cm3217_platform_data cm3217_info = {
+ .irq_pin = CM3217_IRQ_PIN,
+ .power_pin = CM3217_POWER_PIN,
+ .init_platform_hw = cm3217_init_hw,
+ .exit_platform_hw = cm3217_exit_hw,
+};
+#endif
+
+
+
+#ifdef CONFIG_FB_ROCKCHIP
+static struct resource resource_fb[] = {
+ [0] = {
+ .name = "fb0 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "ipp buf", //for rotate
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "fb2 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device device_fb = {
+ .name = "rk-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resource_fb),
+ .resource = resource_fb,
+};
+#endif
+
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+static struct timed_gpio timed_gpios[] = {
+ {
+ .name = "vibrator",
+ .gpio = RK30_PIN0_PA4,
+ .max_timeout = 1000,
+ .active_low = 0,
+ .adjust_time =20, //adjust for diff product
+ },
+};
+
+struct timed_gpio_platform_data rk29_vibrator_info = {
+ .num_gpios = 1,
+ .gpios = timed_gpios,
+};
+
+struct platform_device rk29_device_vibrator ={
+ .name = "timed-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_vibrator_info,
+ },
+
+};
+#endif
+
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+struct gpio_led rk29_leds[] = {
+ {
+ .name = "button-backlight",
+ .gpio = RK30_PIN4_PD7,
+ .default_trigger = "timer",
+ .active_low = 0,
+ .retain_state_suspended = 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
+
+struct gpio_led_platform_data rk29_leds_pdata = {
+ .leds = &rk29_leds,
+ .num_leds = ARRAY_SIZE(rk29_leds),
+};
+
+struct platform_device rk29_device_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_leds_pdata,
+ },
+};
+#endif
+
+#ifdef CONFIG_RK_IRDA
+#define IRDA_IRQ_PIN RK30_PIN6_PA1
+
+int irda_iomux_init(void)
+{
+ int ret = 0;
+
+ //irda irq pin
+ ret = gpio_request(IRDA_IRQ_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(IRDA_IRQ_PIN);
+ printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
+ }
+ gpio_pull_updown(IRDA_IRQ_PIN, PullDisable);
+ gpio_direction_input(IRDA_IRQ_PIN);
+
+ return 0;
+}
+
+int irda_iomux_deinit(void)
+{
+ gpio_free(IRDA_IRQ_PIN);
+ return 0;
+}
+
+static struct irda_info rk29_irda_info = {
+ .intr_pin = IRDA_IRQ_PIN,
+ .iomux_init = irda_iomux_init,
+ .iomux_deinit = irda_iomux_deinit,
+ //.irda_pwr_ctl = bu92747guw_power_ctl,
+};
+
+static struct platform_device irda_device = {
+#ifdef CONFIG_RK_IRDA_NET
+ .name = "rk_irda",
+#else
+ .name = "bu92747_irda",
+#endif
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_irda_info,
+ }
+};
+#endif
+
+
+
static struct platform_device *devices[] __initdata = {
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ &rk29_device_backlight,
+#endif
+#ifdef CONFIG_FB_ROCKCHIP
+ &device_fb,
+#endif
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+ &rk29_device_vibrator,
+#endif
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+ &rk29_device_gpio_leds,
+#endif
+#ifdef CONFIG_RK_IRDA
+ &irda_device,
+#endif
+
+
};
// i2c
#ifdef CONFIG_I2C0_RK30
static struct i2c_board_info __initdata i2c0_info[] = {
+#if defined (CONFIG_GS_MMA8452)
+ {
+ .type = "gs_mma8452",
+ .addr = 0x1c,
+ .flags = 0,
+ .irq = MMA8452_INT_PIN,
+ .platform_data = &mma8452_info,
+ },
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+ {
+ .type = "ak8975",
+ .addr = 0x0d,
+ .flags = 0,
+ .irq = RK30_PIN4_PC1,
+ .platform_data = &akm8975_info,
+ },
+#endif
+#if defined (CONFIG_GYRO_L3G4200D)
+ {
+ .type = "l3g4200d_gryo",
+ .addr = 0x69,
+ .flags = 0,
+ .irq = L3G4200D_INT_PIN,
+ .platform_data = &l3g4200d_info,
+ },
+#endif
+
+#if defined (CONFIG_SND_SOC_RK1000)
+ {
+ .type = "rk1000_i2c_codec",
+ .addr = 0x60,
+ .flags = 0,
+ },
+ {
+ .type = "rk1000_control",
+ .addr = 0x40,
+ .flags = 0,
+ },
+#endif
};
#endif
#ifdef CONFIG_I2C2_RK30
static struct i2c_board_info __initdata i2c2_info[] = {
+#if defined (CONFIG_TOUCHSCREEN_GT8XX)
+ {
+ .type = "Goodix-TS",
+ .addr = 0x55,
+ .flags =0,
+ .irq =RK30_PIN4_PC2,
+ .platform_data = &goodix_info,
+ },
+#endif
+#if defined (CONFIG_LS_CM3217)
+ {
+ .type = "lightsensor",
+ .addr = 0x20,
+ .flags = 0,
+ .irq = CM3217_IRQ_PIN,
+ .platform_data = &cm3217_info,
+ },
+#endif
+
};
#endif
static void __init rk30_reserve(void)
{
+#ifdef CONFIG_FB_ROCKCHIP
+ resource_fb[0].start = board_mem_reserve_add("fb0",RK30_FB0_MEM_SIZE);
+ resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
+ resource_fb[1].start = board_mem_reserve_add("ipp buf",RK30_FB0_MEM_SIZE);
+ resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
+ resource_fb[2].start = board_mem_reserve_add("fb2",RK30_FB0_MEM_SIZE);
+ resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
+#endif
+
+#if (MEM_CAMIPP_SIZE != 0)
+ #if CONFIG_USE_CIF_0
+ rk_camera_platform_data_host_0.meminfo.name = "camera_ipp_mem_0";
+ rk_camera_platform_data_host_0.meminfo.start = board_mem_reserve_add("camera_ipp_mem_0",MEM_CAMIPP_SIZE);
+ rk_camera_platform_data_host_0.meminfo.size= MEM_CAMIPP_SIZE;
+ #endif
+ #if CONFIG_USE_CIF_1
+ rk_camera_platform_data_host_1.meminfo.name = "camera_ipp_mem_1";
+ rk_camera_platform_data_host_1.meminfo.start =board_mem_reserve_add("camera_ipp_mem_1",MEM_CAMIPP_SIZE);
+ rk_camera_platform_data_host_1.meminfo.size= MEM_CAMIPP_SIZE;
+ #endif
+#endif
+
+#if (PMEM_CAM_SIZE != 0)
+ android_pmem_cam_pdata.start = board_mem_reserve_add("camera_pmem",PMEM_CAM_SIZE);
+ android_pmem_cam_pdata.size = PMEM_CAM_SIZE;
+#endif
+
board_mem_reserved();
}
projects / firefly-linux-kernel-4.4.55.git / blobdiff