#include <linux/rfkill-rk.h>
#include <linux/sensor-dev.h>
#include <linux/mfd/tps65910.h>
+#include <linux/regulator/act8931.h>
#include <linux/regulator/rk29-pwm-regulator.h>
#if defined(CONFIG_HDMI_RK30)
#include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
#include "../../../drivers/spi/rk29_spim.h"
#endif
+#include "board-rk2928-a720-camera.c"
#include "board-rk2928-a720-key.c"
#ifdef CONFIG_THREE_FB_BUFFER
#define RK30_FB0_MEM_SIZE 8*SZ_1M
#endif
+int __sramdata g_pmic_type = 0;
+
static struct spi_board_info board_spi_devices[] = {
};
#define PWM_MUX_MODE GPIO0D_PWM_0
#define PWM_MUX_MODE_GPIO GPIO0D_GPIO0D2
#define PWM_GPIO RK2928_PIN0_PD2
-#define PWM_EFFECT_VALUE 1
+#define PWM_EFFECT_VALUE 0
+#if defined(CONFIG_MACH_RK2926_M713)
+//#define LCD_DISP_ON_PIN
+#else
#define LCD_DISP_ON_PIN
+#endif
#ifdef LCD_DISP_ON_PIN
{
int ret = 0;
#ifdef LCD_DISP_ON_PIN
+ gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
gpio_free(BL_EN_PIN);
#endif
rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
return -1;
}
- gpio_direction_output(PWM_GPIO, GPIO_LOW);
+ #if defined(CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ {
+ gpio_direction_output(PWM_GPIO, GPIO_LOW);
+ }
+ #endif
+ #if defined(CONFIG_REGULATOR_ACT8931)
+ if(pmic_is_act8931())
+ {
+ gpio_direction_output(PWM_GPIO, GPIO_HIGH);
+ }
+ #endif
#ifdef LCD_DISP_ON_PIN
gpio_direction_output(BL_EN_PIN, 0);
gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
static struct rk29_bl_info rk29_bl_info = {
.pwm_id = PWM_ID,
+ .min_brightness = 80,
.bl_ref = PWM_EFFECT_VALUE,
.io_init = rk29_backlight_io_init,
.io_deinit = rk29_backlight_io_deinit,
#define LCD_MUX_NAME GPIO0C2_UART0_RTSN_NAME
#define LCD_GPIO_MODE GPIO0C_GPIO0C2
+#ifdef CONFIG_MACH_RK2926_M713
+#define LCD_EN RK2928_PIN1_PB3
+#else
#define LCD_EN RK2928_PIN0_PC2
+#endif
#define LCD_EN_VALUE GPIO_LOW
static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
}
static int rk_fb_io_disable(void)
{
+
+ #if 0//defined(CONFIG_REGULATOR_ACT8931)
+ if(pmic_is_act8931())
+ {
+ struct regulator *ldo;
+ ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd
+ regulator_disable(ldo);
+ regulator_put(ldo);
+ udelay(100);
+ }
+ #endif
gpio_set_value(LCD_EN, !LCD_EN_VALUE);
return 0;
}
static int rk_fb_io_enable(void)
{
+ #if 0//defined(CONFIG_REGULATOR_ACT8931)
+ if(pmic_is_act8931())
+ {
+ struct regulator *ldo;
+ ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd
+ regulator_enable(ldo);
+ regulator_put(ldo);
+ udelay(100);
+ msleep(300); // wait for powering on LED circuit
+ }
+ #endif
+
gpio_set_value(LCD_EN, LCD_EN_VALUE);
return 0;
}
};
#endif
+//LCDC
+#ifdef CONFIG_LCDC_RK2928
+static struct resource resource_lcdc[] = {
+ [0] = {
+ .name = "lcdc reg",
+ .start = RK2928_LCDC_PHYS,
+ .end = RK2928_LCDC_PHYS + RK2928_LCDC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .name = "lcdc irq",
+ .start = IRQ_LCDC,
+ .end = IRQ_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc = {
+ .name = "rk2928-lcdc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resource_lcdc),
+ .resource = resource_lcdc,
+ .dev = {
+ .platform_data = &lcdc_screen_info,
+ },
+};
+#endif
+
#ifdef CONFIG_ION
#define ION_RESERVE_SIZE (80 * SZ_1M)
static struct ion_platform_data rk30_ion_pdata = {
};
#endif
+
+#if defined(CONFIG_TOUCHSCREEN_SITRONIX_A720)
+
+#define TOUCH_RESET_PIN RK2928_PIN1_PA3
+#ifdef CONFIG_MACH_RK2926_M713
+#define TOUCH_INT_PIN RK2928_PIN1_PB0
+#else
+#define TOUCH_INT_PIN RK2928_PIN1_PB3
+#endif
+int ft5306_init_platform_hw(void)
+{
+
+ //printk("ft5306_init_platform_hw\n");
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("ft5306_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("ift5306_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_RESET_PIN, GPIO_HIGH);
+ mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+
+}
+
+struct ft5x0x_platform_data sitronix_info = {
+ .model = 5007,
+ .init_platform_hw= ft5306_init_platform_hw,
+};
+
+#endif
+
+
/*MMA7660 gsensor*/
#if defined (CONFIG_GS_MMA7660)
+#ifdef CONFIG_MACH_RK2926_M713
+#define MMA7660_INT_PIN RK2928_PIN1_PB2
+#else
#define MMA7660_INT_PIN RK2928_PIN1_PB1
+#endif
static int mma7660_init_platform_hw(void)
{
- rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
+#ifdef CONFIG_MACH_RK2926_M713
+ rk30_mux_api_set(GPIO1B2_SPI_RXD_UART1_SIN_NAME, GPIO1B_GPIO1B2);
+#else
+ rk30_mux_api_set(GPIO1B1_SPI_TXD_UART1_SOUT_NAME, GPIO1B_GPIO1B1);
+#endif
return 0;
}
.irq_enable = 1,
.poll_delay_ms = 30,
.init_platform_hw = mma7660_init_platform_hw,
- .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+ .orientation = {-1, 0, 0, 0, 0, -1, 0, 1, 0},
};
#endif
#if CONFIG_RK30_PWM_REGULATOR
-const static int pwm_voltage_map[] = {
+static int pwm_voltage_map[] = {
1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000
};
static struct pwm_platform_data pwm_regulator_info[1] = {
{
+#ifdef CONFIG_MACH_RK2926_M713
+ .pwm_id = 1,
+ .pwm_gpio = RK2928_PIN0_PD3,
+ .pwm_iomux_name = GPIO0D3_PWM_1_NAME,
+ .pwm_iomux_pwm = GPIO0D_PWM_1,
+ .pwm_iomux_gpio = GPIO0D_GPIO0D3,
+#else
.pwm_id = 2,
.pwm_gpio = RK2928_PIN0_PD4,
.pwm_iomux_name = GPIO0D4_PWM_2_NAME,
.pwm_iomux_pwm = GPIO0D_PWM_2,
.pwm_iomux_gpio = GPIO0D_GPIO0D4,
+#endif
.pwm_voltage = 1200000,
.suspend_voltage = 1050000,
.min_uV = 1000000,
};
#endif
+/***********************************************************
+* usb wifi
+************************************************************/
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU)
-static struct platform_device *devices[] __initdata = {
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- &rk29_device_backlight,
+static void rkusb_wifi_power(int on) {
+ struct regulator *ldo = NULL;
+
+#if defined(CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910()) {
+ ldo = regulator_get(NULL, "vmmc"); //vccio_wl
+ }
+#endif
+#if defined(CONFIG_REGULATOR_ACT8931)
+ if(pmic_is_act8931()) {
+ ldo = regulator_get(NULL, "act_ldo4"); //vccio_wl
+ }
+#endif
+
+ if(on) {
+ regulator_enable(ldo);
+ printk("%s: vccio_wl enable\n", __func__);
+ } else {
+ printk("%s: vccio_wl disable\n", __func__);
+ regulator_disable(ldo);
+ }
+
+ regulator_put(ldo);
+ udelay(100);
+}
+
+#endif
+
+/**************************************************************************************************
+ * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
+**************************************************************************************************/
+#ifdef CONFIG_SDMMC_RK29
+#include "board-rk2928-sdk-sdmmc.c"
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+#define SDMMC0_WRITE_PROTECT_PIN RK2928_PIN1_PA7 //According to your own project to set the value of write-protect-pin.
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+#define SDMMC1_WRITE_PROTECT_PIN RK2928_PIN0_PD5 //According to your own project to set the value of write-protect-pin.
+#endif
+
+#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK2928_PIN0_PB2
+
+#define RK29SDK_SD_CARD_DETECT_N RK2928_PIN2_PA7 //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting.
+
+
+#endif //endif ---#ifdef CONFIG_SDMMC_RK29
+
+#ifdef CONFIG_SDMMC0_RK29
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+ rk29_sdmmc_set_iomux(0, 0xFFFF);
+
+#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_GPIO1C1);
+ // gpio_request(RK29SDK_SD_CARD_DETECT_N, "sd-detect");
+ // gpio_direction_output(RK29SDK_SD_CARD_DETECT_N,GPIO_HIGH);//set mmc0-data1 to high.
+#else
+ rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_MMC0_DETN);
+#endif
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+ gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+#endif
+
+ return 0;
+}
+
+#define CONFIG_SDMMC0_USE_DMA
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc0_cfg_gpio,
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+ .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ .detect_irq = RK29SDK_SD_CARD_DETECT_N,
+ .insert_card_level = RK29SDK_SD_CARD_INSERT_LEVEL,
+#else
+ .detect_irq = INVALID_GPIO,
+#endif
+
+ .enable_sd_wakeup = 0,
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+};
+#endif // CONFIG_SDMMC0_RK29
+
+#ifdef CONFIG_SND_SOC_RK2928
+static struct resource resources_acodec[] = {
+ {
+ .start = RK2928_ACODEC_PHYS,
+ .end = RK2928_ACODEC_PHYS + RK2928_ACODEC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = RK2928_PIN1_PA0,
+ .end = RK2928_PIN1_PA0,
+ .flags = IORESOURCE_IO,
+ },
+};
+
+static struct platform_device device_acodec = {
+ .name = "rk2928-codec",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resources_acodec),
+ .resource = resources_acodec,
+};
#endif
+
+#ifdef CONFIG_BATTERY_RK30_ADC_FAC
+static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
+ .dc_det_pin = INVALID_GPIO,
+ .batt_low_pin = INVALID_GPIO,
+ .charge_set_pin = INVALID_GPIO,
+ .charge_ok_pin = INVALID_GPIO,
+};
+
+static struct platform_device rk30_device_adc_battery = {
+ .name = "rk30-battery",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk30_adc_battery_platdata,
+ },
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_FB_ROCKCHIP
&device_fb,
#endif
+#ifdef CONFIG_LCDC_RK2928
+ &device_lcdc,
+#endif
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ &rk29_device_backlight,
+#endif
#ifdef CONFIG_ION
&device_ion,
#endif
+#ifdef CONFIG_SND_SOC_RK2928
+ &device_acodec,
+#endif
+#ifdef CONFIG_BATTERY_RK30_ADC_FAC
+ &rk30_device_adc_battery,
+#endif
};
//i2c
#ifdef CONFIG_I2C0_RK30
#define TPS65910_HOST_IRQ RK2928_PIN1_PB2
#include "board-rk2928-a720-tps65910.c"
#endif
+#ifdef CONFIG_REGULATOR_ACT8931
+#ifdef CONFIG_MACH_RK2926_M713
+#define ACT8931_HOST_IRQ RK2928_PIN1_PB1
+#else
+#define ACT8931_HOST_IRQ RK2928_PIN1_PB2
+#endif
+#include "board-rk2928-sdk-act8931.c"
+#endif
+
static struct i2c_board_info __initdata i2c0_info[] = {
#if defined (CONFIG_MFD_TPS65910)
{
.platform_data = &tps65910_data,
},
#endif
+#if defined (CONFIG_REGULATOR_ACT8931)
+ {
+ .type = "act8931",
+ .addr = 0x5b,
+ .flags = 0,
+ .irq = ACT8931_HOST_IRQ,
+ .platform_data=&act8931_data,
+ },
+#endif
+#ifdef CONFIG_MACH_RK2926_M713
+#if defined (CONFIG_RTC_HYM8563)
+ {
+ .type = "rtc_hym8563",
+ .addr = 0x51,
+ .flags = 0,
+ .irq = RK2928_PIN1_PA5,
+ },
+#endif
+#endif
};
#endif
+
+#ifdef CONFIG_MACH_RK2926_M713
+int __sramdata gpio0d3_iomux,gpio0d3_do,gpio0d3_dir;
+#else
+int __sramdata gpio0d4_iomux,gpio0d4_do,gpio0d4_dir;
+#endif
+
+#define gpio0_readl(offset) readl_relaxed(RK2928_GPIO0_BASE + offset)
+#define gpio0_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO0_BASE + offset); dsb(); } while (0)
+
+void __sramfunc rk30_pwm_logic_suspend_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+
+#ifdef CONFIG_MACH_RK2926_M713
+ sram_udelay(10000);
+ gpio0d3_iomux = readl_relaxed(GRF_GPIO0D_IOMUX);
+ gpio0d3_do = gpio0_readl(GPIO_SWPORTA_DR);
+ gpio0d3_dir = gpio0_readl(GPIO_SWPORTA_DDR);
+
+ writel_relaxed((gpio0d3_iomux |(1<<22)) & (~(1<<6)), GRF_GPIO0D_IOMUX);
+ gpio0_writel(gpio0d3_dir |(1<<27), GPIO_SWPORTA_DDR);
+ gpio0_writel(gpio0d3_do |(1<<27), GPIO_SWPORTA_DR);
+#else
+// int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
+ sram_udelay(10000);
+ gpio0d4_iomux = readl_relaxed(GRF_GPIO0D_IOMUX);
+ gpio0d4_do = gpio0_readl(GPIO_SWPORTA_DR);
+ gpio0d4_dir = gpio0_readl(GPIO_SWPORTA_DDR);
+
+ writel_relaxed((gpio0d4_iomux |(1<<24)) & (~(1<<8)), GRF_GPIO0D_IOMUX);
+ gpio0_writel(gpio0d4_dir |(1<<28), GPIO_SWPORTA_DDR);
+ gpio0_writel(gpio0d4_do |(1<<28), GPIO_SWPORTA_DR);
+#endif
+
+#endif
+}
+void __sramfunc rk30_pwm_logic_resume_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+#ifdef CONFIG_MACH_RK2926_M713
+ writel_relaxed((1<<22)|gpio0d3_iomux, GRF_GPIO0D_IOMUX);
+ gpio0_writel(gpio0d3_dir, GPIO_SWPORTA_DDR);
+ gpio0_writel(gpio0d3_do, GPIO_SWPORTA_DR);
+ sram_udelay(10000);
+#else
+ writel_relaxed((1<<24)|gpio0d4_iomux, GRF_GPIO0D_IOMUX);
+ gpio0_writel(gpio0d4_dir, GPIO_SWPORTA_DDR);
+ gpio0_writel(gpio0d4_do, GPIO_SWPORTA_DR);
+ sram_udelay(10000);
+#endif
+
+#endif
+
+}
+extern void pwm_suspend_voltage(void);
+extern void pwm_resume_voltage(void);
+void rk30_pwm_suspend_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_suspend_voltage();
+#endif
+}
+void rk30_pwm_resume_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_resume_voltage();
+#endif
+}
+
+void __sramfunc board_pmu_suspend(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ board_pmu_tps65910_suspend();
+ #endif
+}
+void __sramfunc board_pmu_resume(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ board_pmu_tps65910_resume();
+ #endif
+}
+
#ifdef CONFIG_I2C1_RK30
static struct i2c_board_info __initdata i2c1_info[] = {
#if defined (CONFIG_GS_MMA7660)
#endif
#ifdef CONFIG_I2C2_RK30
static struct i2c_board_info __initdata i2c2_info[] = {
+#if defined (CONFIG_TOUCHSCREEN_SITRONIX_A720)
+{
+ .type ="sitronix",
+#ifdef CONFIG_MACH_RK2926_M713
+ .addr = 0x60,
+#else
+ .addr = 0x38,
+#endif
+ .flags = 0,
+ .irq = TOUCH_INT_PIN,
+ .platform_data = &sitronix_info,
+},
+#endif
};
#endif
#ifdef CONFIG_I2C3_RK30
}
//end of i2c
-#define POWER_ON_PIN RK2928_PIN1_PA4 //power_hold
+#define POWER_ON_PIN RK2928_PIN1_PA2 //power_hold
+#if defined(CONFIG_REGULATOR_ACT8931)
+extern int act8931_charge_det ;
+#endif
static void rk2928_pm_power_off(void)
{
printk(KERN_ERR "rk2928_pm_power_off start...\n");
+
+ #if defined(CONFIG_REGULATOR_ACT8931)
+ if(pmic_is_act8931())
+ {
+ if(act8931_charge_det)
+ arm_pm_restart(0, NULL);
+ }
+ #endif
- #if defined(CONFIG_MFD_TPS65910)
+ #if defined(CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ {
tps65910_device_shutdown();//tps65910 shutdown
+ }
#endif
gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
{
gpio_request(POWER_ON_PIN, "poweronpin");
gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
- gpio_free(POWER_ON_PIN);
-
+
pm_power_off = rk2928_pm_power_off;
rk30_i2c_register_board_info();
* comments : min arm/logic voltage
*/
static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
- {.frequency = 216 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},//0.975V/1.000V
- {.frequency = 312 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},//0.975V/1.000V
- {.frequency = 408 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},//1.000V/1.025V
- {.frequency = 504 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},//1.000V/1.025V
- {.frequency = 600 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000},//1.025V/1.050V
- //{.frequency = 696 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.000V/1.025V
- //{.frequency = 816 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
- //{.frequency = 912 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
+#if defined(CONFIG_MACH_RK2926_M713)
+ {.frequency = 216 * 1000, .cpu_volt = 850 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 312 * 1000, .cpu_volt = 900 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 408 * 1000, .cpu_volt = 950 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 504 * 1000, .cpu_volt = 1000 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 600 * 1000, .cpu_volt = 1100 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 696 * 1000, .cpu_volt = 1175 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 816 * 1000, .cpu_volt = 1250 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 912 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1008 * 1000, .cpu_volt = 1450 * 1000, .logic_volt = 1200 * 1000},
+#else
+ {.frequency = 216 * 1000, .cpu_volt = 850 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 312 * 1000, .cpu_volt = 900 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 408 * 1000, .cpu_volt = 975 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 504 * 1000, .cpu_volt = 1050 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 600 * 1000, .cpu_volt = 1150 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 696 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 816 * 1000, .cpu_volt = 1325 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 912 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1008 * 1000, .cpu_volt = 1475 * 1000, .logic_volt = 1200 * 1000},
+#endif
#if 0
- {.frequency = 1008 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
- {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
- {.frequency = 1200 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
- {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
- {.frequency = 1248 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
+ {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1200 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
+ {.frequency = 1248 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000},
#endif
- //{.frequency = 1000 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},//1.150V/1.100V
{.frequency = CPUFREQ_TABLE_END},
};