#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/mach-types.h>
-#include <plat/gpmc.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
+#include <asm/mach-types.h>
#include "soc.h"
#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
#define DEVICE_NAME "omap-gpmc"
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
/* GPMC ECC control settings */
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
#define GPMC_ECC_CTRL_ECCREG8 0x008
#define GPMC_ECC_CTRL_ECCREG9 0x009
+#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
+#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
+#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
+#define GPMC_CONFIG4_WEEXTRADELAY BIT(23)
+#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6)
+#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7)
+
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
+#define GPMC_BCH_SIZE 0x10
#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
return __raw_readl(gpmc_base + idx);
}
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- __raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- return __raw_readb(reg_addr);
-}
-
void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
return ticks * gpmc_get_fclk_period() / 1000;
}
+static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
+{
+ return ticks * gpmc_get_fclk_period();
+}
+
+static unsigned int gpmc_round_ps_to_ticks(unsigned int time_ps)
+{
+ unsigned long ticks = gpmc_ps_to_ticks(time_ps);
+
+ return ticks * gpmc_get_fclk_period();
+}
+
+static inline void gpmc_cs_modify_reg(int cs, int reg, u32 mask, bool value)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, reg);
+ if (value)
+ l |= mask;
+ else
+ l &= ~mask;
+ gpmc_cs_write_reg(cs, reg, l);
+}
+
+static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
+{
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_TIME_PARA_GRAN,
+ p->time_para_granularity);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG2,
+ GPMC_CONFIG2_CSEXTRADELAY, p->cs_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG3,
+ GPMC_CONFIG3_ADVEXTRADELAY, p->adv_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
+ GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
+ GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
+ GPMC_CONFIG6_CYCLE2CYCLESAMECSEN,
+ p->cycle2cyclesamecsen);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
+ GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN,
+ p->cycle2cyclediffcsen);
+}
+
#ifdef DEBUG
static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
int time, const char *name)
return -1
#endif
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
{
int div;
u32 l;
int div;
u32 l;
- div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
+
if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
if (gpmc_capability & GPMC_HAS_WR_ACCESS)
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
}
+ gpmc_cs_bool_timings(cs, &t->bool_timings);
+
return 0;
}
}
EXPORT_SYMBOL(gpmc_cs_free);
-/**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
- int status = -EINVAL;
- u32 regval = 0;
-
- switch (cmd) {
- case GPMC_GET_IRQ_STATUS:
- status = gpmc_read_reg(GPMC_IRQSTATUS);
- break;
-
- case GPMC_PREFETCH_FIFO_CNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
- break;
-
- case GPMC_PREFETCH_COUNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_COUNT(regval);
- break;
-
- case GPMC_STATUS_BUFFER:
- regval = gpmc_read_reg(GPMC_STATUS);
- /* 1 : buffer is available to write */
- status = regval & GPMC_STATUS_BUFF_EMPTY;
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_status: Not supported\n");
- }
- return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
/**
* gpmc_cs_configure - write request to configure gpmc
* @cs: chip select number
}
EXPORT_SYMBOL(gpmc_cs_configure);
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
- int rval = -EINVAL;
-
- switch (cmd) {
- case GPMC_NAND_DATA:
- rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
- }
- return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
- int err = 0;
-
- switch (cmd) {
- case GPMC_NAND_COMMAND:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
- break;
-
- case GPMC_NAND_ADDRESS:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
- break;
-
- case GPMC_NAND_DATA:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
- default:
- printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
- err = -EINVAL;
- }
- return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write)
-{
-
- if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
- pr_err("gpmc: fifo threshold is not supported\n");
- return -1;
- } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
- /* Set the amount of bytes to be prefetched */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
- /* Set dma/mpu mode, the prefetch read / post write and
- * enable the engine. Set which cs is has requested for.
- */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
- PREFETCH_FIFOTHRESHOLD(fifo_th) |
- ENABLE_PREFETCH |
- (dma_mode << DMA_MPU_MODE) |
- (0x1 & is_write)));
-
- /* Start the prefetch engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
- } else {
- return -EBUSY;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
- u32 config1;
-
- /* check if the same module/cs is trying to reset */
- config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
- if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
- return -EINVAL;
-
- /* Stop the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
- /* Reset/disable the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
+ int i;
+
reg->gpmc_status = gpmc_base + GPMC_STATUS;
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
- reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+
+ for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+ reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+ GPMC_BCH_SIZE * i;
+ }
}
int gpmc_get_client_irq(unsigned irq_config)
return 0;
}
+static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
+{
+ u32 temp;
+ int div;
+
+ div = gpmc_calc_divider(sync_clk);
+ temp = gpmc_ps_to_ticks(time_ps);
+ temp = (temp + div - 1) / div;
+ return gpmc_ticks_to_ps(temp * div);
+}
+
+/* XXX: can the cycles be avoided ? */
+static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ bool mux = dev_t->mux;
+ u32 temp;
+
+ /* adv_rd_off */
+ temp = dev_t->t_avdp_r;
+ /* XXX: mux check required ? */
+ if (mux) {
+ /* XXX: t_avdp not to be required for sync, only added for tusb
+ * this indirectly necessitates requirement of t_avdp_r and
+ * t_avdp_w instead of having a single t_avdp
+ */
+ temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_avdh);
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ }
+ gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
+
+ /* oe_on */
+ temp = dev_t->t_oeasu; /* XXX: remove this ? */
+ if (mux) {
+ temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_ach);
+ temp = max_t(u32, temp, gpmc_t->adv_rd_off +
+ gpmc_ticks_to_ps(dev_t->cyc_aavdh_oe));
+ }
+ gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
+
+ /* access */
+ /* XXX: any scope for improvement ?, by combining oe_on
+ * and clk_activation, need to check whether
+ * access = clk_activation + round to sync clk ?
+ */
+ temp = max_t(u32, dev_t->t_iaa, dev_t->cyc_iaa * gpmc_t->sync_clk);
+ temp += gpmc_t->clk_activation;
+ if (dev_t->cyc_oe)
+ temp = max_t(u32, temp, gpmc_t->oe_on +
+ gpmc_ticks_to_ps(dev_t->cyc_oe));
+ gpmc_t->access = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
+ gpmc_t->cs_rd_off = gpmc_t->oe_off;
+
+ /* rd_cycle */
+ temp = max_t(u32, dev_t->t_cez_r, dev_t->t_oez);
+ temp = gpmc_round_ps_to_sync_clk(temp, gpmc_t->sync_clk) +
+ gpmc_t->access;
+ /* XXX: barter t_ce_rdyz with t_cez_r ? */
+ if (dev_t->t_ce_rdyz)
+ temp = max_t(u32, temp, gpmc_t->cs_rd_off + dev_t->t_ce_rdyz);
+ gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ bool mux = dev_t->mux;
+ u32 temp;
+
+ /* adv_wr_off */
+ temp = dev_t->t_avdp_w;
+ if (mux) {
+ temp = max_t(u32, temp,
+ gpmc_t->clk_activation + dev_t->t_avdh);
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ }
+ gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
+
+ /* wr_data_mux_bus */
+ temp = max_t(u32, dev_t->t_weasu,
+ gpmc_t->clk_activation + dev_t->t_rdyo);
+ /* XXX: shouldn't mux be kept as a whole for wr_data_mux_bus ?,
+ * and in that case remember to handle we_on properly
+ */
+ if (mux) {
+ temp = max_t(u32, temp,
+ gpmc_t->adv_wr_off + dev_t->t_aavdh);
+ temp = max_t(u32, temp, gpmc_t->adv_wr_off +
+ gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
+ }
+ gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
+
+ /* we_on */
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
+ gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
+ else
+ gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
+
+ /* wr_access */
+ /* XXX: gpmc_capability check reqd ? , even if not, will not harm */
+ gpmc_t->wr_access = gpmc_t->access;
+
+ /* we_off */
+ temp = gpmc_t->we_on + dev_t->t_wpl;
+ temp = max_t(u32, temp,
+ gpmc_t->wr_access + gpmc_ticks_to_ps(1));
+ temp = max_t(u32, temp,
+ gpmc_t->we_on + gpmc_ticks_to_ps(dev_t->cyc_wpl));
+ gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
+ dev_t->t_wph);
+
+ /* wr_cycle */
+ temp = gpmc_round_ps_to_sync_clk(dev_t->t_cez_w, gpmc_t->sync_clk);
+ temp += gpmc_t->wr_access;
+ /* XXX: barter t_ce_rdyz with t_cez_w ? */
+ if (dev_t->t_ce_rdyz)
+ temp = max_t(u32, temp,
+ gpmc_t->cs_wr_off + dev_t->t_ce_rdyz);
+ gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ bool mux = dev_t->mux;
+ u32 temp;
+
+ /* adv_rd_off */
+ temp = dev_t->t_avdp_r;
+ if (mux)
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
+
+ /* oe_on */
+ temp = dev_t->t_oeasu;
+ if (mux)
+ temp = max_t(u32, temp,
+ gpmc_t->adv_rd_off + dev_t->t_aavdh);
+ gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
+
+ /* access */
+ temp = max_t(u32, dev_t->t_iaa, /* XXX: remove t_iaa in async ? */
+ gpmc_t->oe_on + dev_t->t_oe);
+ temp = max_t(u32, temp,
+ gpmc_t->cs_on + dev_t->t_ce);
+ temp = max_t(u32, temp,
+ gpmc_t->adv_on + dev_t->t_aa);
+ gpmc_t->access = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
+ gpmc_t->cs_rd_off = gpmc_t->oe_off;
+
+ /* rd_cycle */
+ temp = max_t(u32, dev_t->t_rd_cycle,
+ gpmc_t->cs_rd_off + dev_t->t_cez_r);
+ temp = max_t(u32, temp, gpmc_t->oe_off + dev_t->t_oez);
+ gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ bool mux = dev_t->mux;
+ u32 temp;
+
+ /* adv_wr_off */
+ temp = dev_t->t_avdp_w;
+ if (mux)
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
+
+ /* wr_data_mux_bus */
+ temp = dev_t->t_weasu;
+ if (mux) {
+ temp = max_t(u32, temp, gpmc_t->adv_wr_off + dev_t->t_aavdh);
+ temp = max_t(u32, temp, gpmc_t->adv_wr_off +
+ gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
+ }
+ gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
+
+ /* we_on */
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
+ gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
+ else
+ gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
+
+ /* we_off */
+ temp = gpmc_t->we_on + dev_t->t_wpl;
+ gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
+ dev_t->t_wph);
+
+ /* wr_cycle */
+ temp = max_t(u32, dev_t->t_wr_cycle,
+ gpmc_t->cs_wr_off + dev_t->t_cez_w);
+ gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ u32 temp;
+
+ gpmc_t->sync_clk = gpmc_calc_divider(dev_t->clk) *
+ gpmc_get_fclk_period();
+
+ gpmc_t->page_burst_access = gpmc_round_ps_to_sync_clk(
+ dev_t->t_bacc,
+ gpmc_t->sync_clk);
+
+ temp = max_t(u32, dev_t->t_ces, dev_t->t_avds);
+ gpmc_t->clk_activation = gpmc_round_ps_to_ticks(temp);
+
+ if (gpmc_calc_divider(gpmc_t->sync_clk) != 1)
+ return 0;
+
+ if (dev_t->ce_xdelay)
+ gpmc_t->bool_timings.cs_extra_delay = true;
+ if (dev_t->avd_xdelay)
+ gpmc_t->bool_timings.adv_extra_delay = true;
+ if (dev_t->oe_xdelay)
+ gpmc_t->bool_timings.oe_extra_delay = true;
+ if (dev_t->we_xdelay)
+ gpmc_t->bool_timings.we_extra_delay = true;
+
+ return 0;
+}
+
+static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ u32 temp;
+
+ /* cs_on */
+ gpmc_t->cs_on = gpmc_round_ps_to_ticks(dev_t->t_ceasu);
+
+ /* adv_on */
+ temp = dev_t->t_avdasu;
+ if (dev_t->t_ce_avd)
+ temp = max_t(u32, temp,
+ gpmc_t->cs_on + dev_t->t_ce_avd);
+ gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
+
+ if (dev_t->sync_write || dev_t->sync_read)
+ gpmc_calc_sync_common_timings(gpmc_t, dev_t);
+
+ return 0;
+}
+
+/* TODO: remove this function once all peripherals are confirmed to
+ * work with generic timing. Simultaneously gpmc_cs_set_timings()
+ * has to be modified to handle timings in ps instead of ns
+*/
+static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
+{
+ t->cs_on /= 1000;
+ t->cs_rd_off /= 1000;
+ t->cs_wr_off /= 1000;
+ t->adv_on /= 1000;
+ t->adv_rd_off /= 1000;
+ t->adv_wr_off /= 1000;
+ t->we_on /= 1000;
+ t->we_off /= 1000;
+ t->oe_on /= 1000;
+ t->oe_off /= 1000;
+ t->page_burst_access /= 1000;
+ t->access /= 1000;
+ t->rd_cycle /= 1000;
+ t->wr_cycle /= 1000;
+ t->bus_turnaround /= 1000;
+ t->cycle2cycle_delay /= 1000;
+ t->wait_monitoring /= 1000;
+ t->clk_activation /= 1000;
+ t->wr_access /= 1000;
+ t->wr_data_mux_bus /= 1000;
+}
+
+int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ memset(gpmc_t, 0, sizeof(*gpmc_t));
+
+ gpmc_calc_common_timings(gpmc_t, dev_t);
+
+ if (dev_t->sync_read)
+ gpmc_calc_sync_read_timings(gpmc_t, dev_t);
+ else
+ gpmc_calc_async_read_timings(gpmc_t, dev_t);
+
+ if (dev_t->sync_write)
+ gpmc_calc_sync_write_timings(gpmc_t, dev_t);
+ else
+ gpmc_calc_async_write_timings(gpmc_t, dev_t);
+
+ /* TODO: remove, see function definition */
+ gpmc_convert_ps_to_ns(gpmc_t);
+
+ return 0;
+}
+
static __devinit int gpmc_probe(struct platform_device *pdev)
{
int rc;
}
}
#endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
- unsigned int val;
-
- /* check if ecc module is in used */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
-
- /* program ecc and result sizes */
- val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
- switch (mode) {
- case GPMC_ECC_READ:
- case GPMC_ECC_WRITE:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
- break;
- case GPMC_ECC_READSYN:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCDISABLE);
- break;
- default:
- printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
- break;
- }
-
- /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
- val = (dev_width << 7) | (cs << 1) | (0x1);
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
- unsigned int val = 0x0;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- /* read ecc result */
- val = gpmc_read_reg(GPMC_ECC1_RESULT);
- *ecc_code++ = val; /* P128e, ..., P1e */
- *ecc_code++ = val >> 16; /* P128o, ..., P1o */
- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- /* support only OMAP3 class */
- if (!cpu_is_omap34xx()) {
- printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /*
- * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
- * Other chips may be added if confirmed to work.
- */
- if ((nerrors == 4) &&
- (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
- printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /* sanity check */
- if (nsectors > 8) {
- printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
- nsectors);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors)
-{
- unsigned int val;
-
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-
- /*
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-
- /* BCH configuration */
- val = ((1 << 16) | /* enable BCH */
- (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
- (0x06 << 8) | /* wrap mode = 6 */
- (dev_width << 7) | /* bus width */
- (((nsectors-1) & 0x7) << 4) | /* number of sectors */
- (cs << 1) | /* ECC CS */
- (0x1)); /* enable ECC */
-
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs; and
- * left-justify the resulting polynomial.
- */
- *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
- *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
- *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
- *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
- *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
- *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
- *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2, val3, val4;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
- val3 = gpmc_read_reg(reg + 8);
- val4 = gpmc_read_reg(reg + 12);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs.
- */
- *ecc++ = 0xef ^ (val4 & 0xFF);
- *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
- *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
- *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
- *ecc++ = 0xed ^ (val3 & 0xFF);
- *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
- *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
- *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
- *ecc++ = 0x97 ^ (val2 & 0xFF);
- *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
- *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
- *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
- *ecc++ = 0xb5 ^ (val1 & 0xFF);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-
-#endif /* CONFIG_ARCH_OMAP3 */
projects / firefly-linux-kernel-4.4.55.git / blobdiff