#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#define NAND_CS 0
+static struct pwm_lookup pwm_lookup[] = {
+ /* LEDB -> PMU_STAT */
+ PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"),
+};
+
+static struct led_pwm pwm_leds[] = {
+ {
+ .name = "beagleboard::pmu_stat",
+ .max_brightness = 127,
+ .pwm_period_ns = 7812500,
+ },
+};
+
+static struct led_pwm_platform_data pwm_data = {
+ .num_leds = ARRAY_SIZE(pwm_leds),
+ .leds = pwm_leds,
+};
+
+static struct platform_device leds_pwm = {
+ .name = "leds_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_data,
+ },
+};
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
return 0;
}
.default_trigger = "mmc0",
.gpio = 149,
},
- {
- .name = "beagleboard::pmu_stat",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- },
};
static struct gpio_led_platform_data gpio_led_info = {
&leds_gpio,
&keys_gpio,
&madc_hwmon,
+ &leds_pwm,
};
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
}
return 0;
}
-device_initcall(beagle_opp_init);
+omap_device_initcall(beagle_opp_init);
static void __init omap3_beagle_init(void)
{
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle");
+ omap_twl4030_audio_init("omap3beagle", NULL);
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+ pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
.init_late = omap3_init_late,
- .timer = &omap3_secure_timer,
+ .init_time = omap3_secure_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END