Merge git://git.kvack.org/~bcrl/aio-next

[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / sun6i-a31-colombus.dts

diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 3898a7bce8317906054c3662c182e48dc9b6b9ff..546cf6eff5c796fcaa65da5f2bd58331ef0a59c1 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
 
 / {
        model = "WITS A31 Colombus Evaluation Board";
@@ -23,6 +24,45 @@
        };
 
        soc@01c00000 {
+               mmc0: mmc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+                       vmmc-supply = <&reg_vcc3v0>;
+                       bus-width = <4>;
+                       cd-gpios = <&pio 0 8 0>; /* PA8 */
+                       cd-inverted;
+                       status = "okay";
+               };
+
+               usbphy: phy@01c19400 {
+                       usb2_vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
+               ehci1: usb@01c1b000 {
+                       status = "okay";
+               };
+
+               pio: pinctrl@01c20800 {
+                       mmc0_pins_a: mmc0@0 {
+                               allwinner,pull = <1>;
+                       };
+
+                       mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+                               allwinner,pins = "PA8";
+                               allwinner,function = "gpio_in";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <1>;
+                       };
+
+                       usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+                               allwinner,pins = "PH24";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+               };
+
                uart0: serial@01c28000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&uart0_pins_a>;
@@ -47,4 +87,11 @@
                        status = "okay";
                };
        };
+
+       reg_usb2_vbus: usb2-vbus {
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb2_vbus_pin_colombus>;
+               gpio = <&pio 7 24 0>;
+               status = "okay";
+       };
 };