Merge remote-tracking branches 'asoc/fix/nau8825', 'asoc/fix/ops', 'asoc/fix/rcar...

[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / r8a7791-porter.dts

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index ca59ff8619230f5743f0c7ddf4c5cebd1dd69070..fe0f12fc02a186da11f23a7d0e5aab9a87e70a48 100644 (file)
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 #include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Porter";
@@ -33,6 +34,50 @@
                device_type = "memory";
                reg = <2 0x00000000 0 0x40000000>;
        };
+
+       vcc_sdhi0: regulator@0 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+
+       vccq_sdhi0: regulator@1 {
+               compatible = "regulator-gpio";
+
+               regulator-name = "SDHI0 VccQ";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+               gpios-states = <1>;
+               states = <3300000 1
+                         1800000 0>;
+       };
+
+       vcc_sdhi2: regulator@2 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI2 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+
+       vccq_sdhi2: regulator@3 {
+               compatible = "regulator-gpio";
+
+               regulator-name = "SDHI2 VccQ";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+               gpios-states = <1>;
+               states = <3300000 1
+                         1800000 0>;
+       };
 };
 
 &extal_clk {
@@ -54,6 +99,41 @@
                renesas,groups = "intc_irq0";
                renesas,function = "intc";
        };
+
+       sdhi0_pins: sd0 {
+               renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+               renesas,function = "sdhi0";
+       };
+
+       sdhi2_pins: sd2 {
+               renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+               renesas,function = "sdhi2";
+       };
+
+       qspi_pins: spi0 {
+               renesas,groups = "qspi_ctrl", "qspi_data4";
+               renesas,function = "qspi";
+       };
+
+       i2c2_pins: i2c2 {
+               renesas,groups = "i2c2";
+               renesas,function = "i2c2";
+       };
+
+       usb0_pins: usb0 {
+               renesas,groups = "usb0";
+               renesas,function = "usb0";
+       };
+
+       usb1_pins: usb1 {
+               renesas,groups = "usb1";
+               renesas,function = "usb1";
+       };
+
+       vin0_pins: vin0 {
+               renesas,groups = "vin0_data8", "vin0_clk";
+               renesas,function = "vin0";
+       };
 };
 
 &scif0 {
@@ -78,3 +158,125 @@
                micrel,led-mode = <1>;
        };
 };
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&vcc_sdhi0>;
+       vqmmc-supply = <&vccq_sdhi0>;
+       cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+       wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&sdhi2 {
+       pinctrl-0 = <&sdhi2_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&vcc_sdhi2>;
+       vqmmc-supply = <&vccq_sdhi2>;
+       cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&qspi {
+       pinctrl-0 = <&qspi_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "spansion,s25fl512s", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <30000000>;
+               spi-tx-bus-width = <4>;
+               spi-rx-bus-width = <4>;
+               m25p,fast-read;
+
+               partition@0 {
+                       label = "loader_prg";
+                       reg = <0x00000000 0x00040000>;
+                       read-only;
+               };
+               partition@40000 {
+                       label = "user_prg";
+                       reg = <0x00040000 0x00400000>;
+                       read-only;
+               };
+               partition@440000 {
+                       label = "flash_fs";
+                       reg = <0x00440000 0x03bc0000>;
+               };
+       };
+};
+
+&i2c2 {
+       pinctrl-0 = <&i2c2_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+       clock-frequency = <400000>;
+
+       composite-in@20 {
+               compatible = "adi,adv7180";
+               reg = <0x20>;
+               remote = <&vin0>;
+
+               port {
+                       adv7180: endpoint {
+                               bus-width = <8>;
+                               remote-endpoint = <&vin0ep>;
+                       };
+               };
+       };
+};
+
+&sata0 {
+       status = "okay";
+};
+
+/* composite video input */
+&vin0 {
+       status = "ok";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep: endpoint {
+                       remote-endpoint = <&adv7180>;
+                       bus-width = <8>;
+               };
+       };
+};
+
+&pci0 {
+       pinctrl-0 = <&usb0_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&pci1 {
+       pinctrl-0 = <&usb1_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};
+
+&pcie_bus_clk {
+       status = "okay";
+};
+
+&pciec {
+       status = "okay";
+};