ARM: dts: omap3-beagle: Add USB OTG PHY details

[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / omap4-panda-common.dtsi

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index faa95b5b242ee437aeea84c8d4dde915a67c2031..3e6801cecd04378616018927275532b297500818 100644 (file)
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -60,22 +60,6 @@
                        "AFMR", "Line In";
        };
 
-       /*
-        * Temp hack: Need to be replaced with the proper gpio-controlled
-        * reset driver as soon it will be merged.
-        * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
-        */
-       /* HS USB Port 1 RESET */
-       hsusb1_reset: hsusb1_reset_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "hsusb1_reset";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&gpio2 30 0>;   /* gpio_62 */
-               startup-delay-us = <70000>;
-               enable-active-high;
-       };
-
        /* HS USB Port 1 Power */
        hsusb1_power: hsusb1_power_reg {
                compatible = "regulator-fixed";
@@ -97,7 +81,7 @@
        /* HS USB Host PHY on PORT 1 */
        hsusb1_phy: hsusb1_phy {
                compatible = "usb-nop-xceiv";
-               reset-supply = <&hsusb1_reset>;
+               reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
                vcc-supply = <&hsusb1_power>;
        /**
         * FIXME:
@@ -107,25 +91,24 @@
         */
                clock-frequency = <19200000>;
        };
-};
 
-&omap4_pmx_wkup {
-       pinctrl-names = "default";
-       pinctrl-0 = <
-                       &twl6030_wkup_pins
-       >;
-
-       twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-               pinctrl-single,pins = <
-                       0x14 (PIN_OUTPUT | MUX_MODE2)           /* fref_clk0_out.sys_drm_msecure */
-               >;
+       /* regulator for wl12xx on sdio5 */
+       wl12xx_vmmc: wl12xx_vmmc {
+               pinctrl-names = "default";
+               pinctrl-0 = <&wl12xx_gpio>;
+               compatible = "regulator-fixed";
+               regulator-name = "vwl1271";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               gpio = <&gpio2 11 0>;
+               startup-delay-us = <70000>;
+               enable-active-high;
        };
 };
 
 &omap4_pmx_core {
        pinctrl-names = "default";
        pinctrl-0 = <
-                       &twl6030_pins
                        &twl6040_pins
                        &mcpdm_pins
                        &mcbsp1_pins
@@ -134,12 +117,6 @@
                        &hsusbb1_pins
        >;
 
-       twl6030_pins: pinmux_twl6030_pins {
-               pinctrl-single,pins = <
-                       0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)        /* sys_nirq1.sys_nirq1 */
-               >;
-       };
-
        twl6040_pins: pinmux_twl6040_pins {
                pinctrl-single,pins = <
                        0xe0 (PIN_OUTPUT | MUX_MODE3)   /* hdq_sio.gpio_127 */
@@ -235,6 +212,33 @@
                        0x1c (PIN_OUTPUT | MUX_MODE3)   /* gpio_wk8 */
                >;
        };
+
+       /*
+        * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+        * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+        */
+       wl12xx_gpio: pinmux_wl12xx_gpio {
+               pinctrl-single,pins = <
+                       0x26 (PIN_OUTPUT | MUX_MODE3)           /* gpmc_a19.gpio_43 */
+                       0x2c (PIN_OUTPUT | MUX_MODE3)           /* gpmc_a22.gpio_46 */
+                       0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)    /* gpmc_a24.gpio_48 */
+                       0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)    /* gpmc_a25.gpio_49 */
+               >;
+       };
+
+       /* wl12xx GPIO inputs and SDIO pins */
+       wl12xx_pins: pinmux_wl12xx_pins {
+               pinctrl-single,pins = <
+                       0x38 (PIN_INPUT | MUX_MODE3)            /* gpmc_ncs2.gpio_52 */
+                       0x3a (PIN_INPUT | MUX_MODE3)            /* gpmc_ncs3.gpio_53 */
+                       0x108 (PIN_OUTPUT | MUX_MODE0)          /* sdmmc5_clk.sdmmc5_clk */
+                       0x10a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_cmd.sdmmc5_cmd */
+                       0x10c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat0.sdmmc5_dat0 */
+                       0x10e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat1.sdmmc5_dat1 */
+                       0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat2.sdmmc5_dat2 */
+                       0x112 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat3.sdmmc5_dat3 */
+               >;
+       };
 };
 
 &i2c1 {
@@ -265,6 +269,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
        pinctrl-names = "default";
@@ -314,8 +319,12 @@
 };
 
 &mmc5 {
-       ti,non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&wl12xx_pins>;
+       vmmc-supply = <&wl12xx_vmmc>;
+       non-removable;
        bus-width = <4>;
+       cap-power-off-card;
 };
 
 &emif1 {