ARM: dts: add Gateworks Ventana support
[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / imx6q-gw5400-a.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
new file mode 100644 (file)
index 0000000..902f983
--- /dev/null
@@ -0,0 +1,546 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+       model = "Gateworks Ventana GW5400-A";
+       compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
+
+       /* these are used by bootloader for disabling nodes */
+       aliases {
+               ethernet0 = &fec;
+               ethernet1 = &eth1;
+               i2c0 = &i2c1;
+               i2c1 = &i2c2;
+               i2c2 = &i2c3;
+               led0 = &led0;
+               led1 = &led1;
+               led2 = &led2;
+               sky2 = &eth1;
+               ssi0 = &ssi1;
+               spi0 = &ecspi1;
+               usb0 = &usbh1;
+               usb1 = &usbotg;
+               usdhc2 = &usdhc3;
+       };
+
+       chosen {
+               bootargs = "console=ttymxc1,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led0: user1 {
+                       label = "user1";
+                       gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+                       default-state = "on";
+                       linux,default-trigger = "heartbeat";
+               };
+
+               led1: user2 {
+                       label = "user2";
+                       gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+                       default-state = "off";
+               };
+
+               led2: user3 {
+                       label = "user3";
+                       gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+                       default-state = "off";
+               };
+       };
+
+       memory {
+               reg = <0x10000000 0x40000000>;
+       };
+
+       pps {
+               compatible = "pps-gpio";
+               gpios = <&gpio1 5 0>;
+               status = "okay";
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_1p0v: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "1P0V";
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1000000>;
+                       regulator-always-on;
+               };
+
+               reg_3p3v: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "3P3V";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_h1_vbus: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "usb_h1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_otg_vbus: regulator@3 {
+                       compatible = "regulator-fixed";
+                       reg = <3>;
+                       regulator-name = "usb_otg_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio3 22 0>;
+                       enable-active-high;
+               };
+       };
+
+       sound {
+               compatible = "fsl,imx6q-sabrelite-sgtl5000",
+                            "fsl,imx-audio-sgtl5000";
+               model = "imx6q-sabrelite-sgtl5000";
+               ssi-controller = <&ssi1>;
+               audio-codec = <&codec>;
+               audio-routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+               mux-int-port = <1>;
+               mux-ext-port = <4>;
+       };
+};
+
+&audmux {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_audmux>;
+       status = "okay";
+};
+
+&ecspi1 {
+       fsl,spi-num-chipselects = <1>;
+       cs-gpios = <&gpio3 19 0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi1>;
+       status = "okay";
+
+       flash: m25p80@0 {
+               compatible = "sst,w25q256";
+               spi-max-frequency = <30000000>;
+               reg = <0>;
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio1 30 0>;
+       status = "okay";
+};
+
+&i2c1 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+
+       eeprom1: eeprom@50 {
+               compatible = "atmel,24c02";
+               reg = <0x50>;
+               pagesize = <16>;
+       };
+
+       eeprom2: eeprom@51 {
+               compatible = "atmel,24c02";
+               reg = <0x51>;
+               pagesize = <16>;
+       };
+
+       eeprom3: eeprom@52 {
+               compatible = "atmel,24c02";
+               reg = <0x52>;
+               pagesize = <16>;
+       };
+
+       eeprom4: eeprom@53 {
+               compatible = "atmel,24c02";
+               reg = <0x53>;
+               pagesize = <16>;
+       };
+
+       gpio: pca9555@23 {
+               compatible = "nxp,pca9555";
+               reg = <0x23>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       hwmon: gsc@29 {
+               compatible = "gw,gsp";
+               reg = <0x29>;
+       };
+
+       rtc: ds1672@68 {
+               compatible = "dallas,ds1672";
+               reg = <0x68>;
+       };
+};
+
+&i2c2 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       status = "okay";
+
+       pmic: pfuze100@08 {
+               compatible = "fsl,pfuze100";
+               reg = <0x08>;
+
+               regulators {
+                       sw1a_reg: sw1ab {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <6250>;
+                       };
+
+                       sw1c_reg: sw1c {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <6250>;
+                       };
+
+                       sw2_reg: sw2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3950000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3a_reg: sw3a {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3b_reg: sw3b {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw4_reg: sw4 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       swbst_reg: swbst {
+                               regulator-min-microvolt = <5000000>;
+                               regulator-max-microvolt = <5150000>;
+                       };
+
+                       snvs_reg: vsnvs {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vref_reg: vrefddr {
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vgen1_reg: vgen1 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen2_reg: vgen2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen3_reg: vgen3 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       vgen4_reg: vgen4 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen5_reg: vgen5 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen6_reg: vgen6 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+               };
+       };
+
+       pciswitch: pex8609@3f {
+               compatible = "plx,pex8609";
+               reg = <0x3f>;
+       };
+
+       pciclkgen: si52147@6b {
+               compatible = "sil,si52147";
+               reg = <0x6b>;
+       };
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>;
+       status = "okay";
+
+       accelerometer: mma8450@1c {
+               compatible = "fsl,mma8450";
+               reg = <0x1c>;
+       };
+
+       codec: sgtl5000@0a {
+               compatible = "fsl,sgtl5000";
+               reg = <0x0a>;
+               clocks = <&clks 201>;
+               VDDA-supply = <&sw4_reg>;
+               VDDIO-supply = <&reg_3p3v>;
+       };
+
+       hdmiin: adv7611@4c {
+               compatible = "adi,adv7611";
+               reg = <0x4c>;
+       };
+
+       touchscreen: egalax_ts@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio7>;
+               interrupts = <12 2>; /* gpio7_12 active low */
+               wakeup-gpios = <&gpio7 12 0>;
+       };
+
+       videoout: adv7393@2a {
+               compatible = "adi,adv7393";
+               reg = <0x2a>;
+       };
+
+       videoin: adv7180@20 {
+               compatible = "adi,adv7180";
+               reg = <0x20>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       imx6q-gw5400-a {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+                               MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+                               MX6QDL_PAD_GPIO_5__GPIO1_IO05     0x80000000 /* GPS_PPS */
+                               MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+                               MX6QDL_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
+                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+                               MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+                               MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+                        >;
+               };
+
+               pinctrl_audmux: audmuxgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
+                               MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
+                               MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
+                               MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
+                       >;
+               };
+
+               pinctrl_ecspi1: ecspi1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
+                               MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
+                               MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
+                       >;
+               };
+
+               pinctrl_enet: enetgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
+                               MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
+                               MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
+                               MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
+                               MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
+                               MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
+                               MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+                               MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+                               MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+                       >;
+               };
+
+               pinctrl_i2c1: i2c1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
+                               MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
+                               MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c3: i2c3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
+                               MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
+                               MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
+                               MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart5: uart5grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
+                               MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
+                       >;
+               };
+
+               pinctrl_usbotg: usbotggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                       >;
+               };
+
+               pinctrl_usdhc3: usdhc3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
+                               MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
+                               MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
+                               MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
+                               MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
+                               MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
+                       >;
+               };
+       };
+};
+
+&ldb {
+       status = "okay";
+       lvds-channel@0 {
+               crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+       };
+};
+
+&pcie {
+       reset-gpio = <&gpio1 29 0>;
+       status = "okay";
+
+       eth1: sky2@8 { /* MAC/PHY on bus 8 */
+               compatible = "marvell,sky2";
+       };
+};
+
+&ssi1 {
+       fsl,mode = "i2s-slave";
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 0>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};