ARM: mxs: rename dts files with soc name being the prefix

[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / imx28-tx28.dts

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
new file mode 100644 (file)
index 0000000..62bf767
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -0,0 +1,97 @@
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+       model = "Ka-Ro electronics TX28 module";
+       compatible = "karo,tx28", "fsl,imx28";
+
+       memory {
+               reg = <0x40000000 0x08000000>;
+       };
+
+       apb@80000000 {
+               apbh@80000000 {
+                       ssp0: ssp@80010000 {
+                               compatible = "fsl,imx28-mmc";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&mmc0_4bit_pins_a
+                                            &mmc0_cd_cfg
+                                            &mmc0_sck_cfg>;
+                               bus-width = <4>;
+                               status = "okay";
+                       };
+
+                       pinctrl@80018000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&hog_pins_a>;
+
+                               hog_pins_a: hog-gpios@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <0>;
+                               };
+                       };
+               };
+
+               apbx@80040000 {
+                       i2c0: i2c@80058000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&i2c0_pins_a>;
+                               status = "okay";
+
+                               ds1339: rtc@68 {
+                                       compatible = "mxim,ds1339";
+                                       reg = <0x68>;
+                               };
+                       };
+
+                       pwm: pwm@80064000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pwm0_pins_a>;
+                               status = "okay";
+                       };
+
+                       duart: serial@80074000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&duart_4pins_a>;
+                               status = "okay";
+                       };
+
+                       auart1: serial@8006c000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&auart1_pins_a>;
+                               status = "okay";
+                       };
+               };
+       };
+
+       ahb@80080000 {
+               mac0: ethernet@800f0000 {
+                       phy-mode = "rmii";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mac0_pins_a>;
+                       status = "okay";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               user {
+                       label = "Heartbeat";
+                       gpios = <&gpio4 10 0>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <6>;
+       };
+};