config GENERIC_GPIO
bool
- default n
config GENERIC_TIME
bool
- default n
config GENERIC_CLOCKEVENTS
bool
- default n
config GENERIC_CLOCKEVENTS_BROADCAST
bool
config NO_IOPORT
bool
- default n
config EISA
bool
config ARCH_HAS_ILOG2_U32
bool
- default n
config ARCH_HAS_ILOG2_U64
bool
- default n
config GENERIC_HWEIGHT
bool
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
This enables support for the Cirrus EP93xx series of CPUs.
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
+config ARCH_STMP3XXX
+ bool "Freescale STMP3xxx"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select USB_ARCH_HAS_EHCI
+ help
+ Support for systems based on the Freescale 3xxx CPUs.
+
config ARCH_NETX
bool "Hilscher NetX based"
select CPU_ARM926T
help
This enables support for systems based on the Hynix HMS720x
-config ARCH_IMX
- bool "IMX"
- select CPU_ARM920T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Motorola's i.MX family of processors (MX1, MXL).
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
select CPU_ARM926T
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ select COMMON_CLKDEV
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
can login www.mcuos.com or www.nuvoton.com to know more.
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
+ select HAVE_IDE
+ select COMMON_CLKDEV
+ select GENERIC_ALLOCATOR
help
Support for TI's DaVinci platform.
source "arch/arm/mach-s3c6410/Kconfig"
endif
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 && !SMP
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
endmenu
source "arch/arm/common/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
If you don't know what to do here, say N.
+config HAVE_ARM_SCU
+ bool
+ depends on SMP
+ help
+ This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+ bool
+ depends on SMP
+ help
+ This options enables support for the ARM timer and watchdog unit
+
choice
prompt "Memory split"
default VMSPLIT_3G
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
default y
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default y
- depends on FLATMEM
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_EBSA285 || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182
+ ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
correct operation of some network protocols. With an IP-only
configuration it is safe to say N, otherwise say Y.
+config UACCESS_WITH_MEMCPY
+ bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+ depends on MMU && EXPERIMENTAL
+ default y if CPU_FEROCEON
+ help
+ Implement faster copy_to_user and clear_user methods for CPU
+ cores where a 8-word STM instruction give significantly higher
+ memory write throughput than a sequence of individual 32bit stores.
+
+ A possible side effect is a slight increase in scheduling latency
+ between threads sharing the same address space if they invoke
+ such copy operations with large buffers.
+
+ However, if the CPU data cache is using a write-allocate mode,
+ this option is unlikely to provide any performance gain.
+
endmenu
menu "Boot options"
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
If in doubt, say Y.
-config CPU_FREQ_IMX
- tristate "CPUfreq driver for i.MX CPUs"
- depends on ARCH_IMX && CPU_FREQ
- default n
- help
- This enables the CPUfreq driver for i.MX CPUs.
-
- If in doubt, say N.
-
config CPU_FREQ_PXA
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x