echo "-numa numa aware"
echo "-eventmonitor turn on transaction event trace recording"
echo
+echo OOOJava options
+echo -coreprof, turn on profiling API
+echo -coreprof-eventwords NUM, space in words/thread for coreprof events
+echo -coreprof-checkoverflow, ONLY use for debugging event overflow
+echo -coreprof-enable EVENTNAME, only enable desired events to reduce overhead
+echo EVENTNAME can be: cpe_main, cpe_runmalloc, cpe_runfree, cpe_poolalloc, cpe_count_poolalloc, cpe_count_poolreuse, cpe_workschedgrab, cpe_taskdispatch, cpe_preparememq, cpe_taskexecute, cpe_taskretire, cpe_taskstallvar, cpe_taskstallmem
+echo "-ooojava <numberofcores> <maxseseage>"
+echo -ooodebug general OOOJava debugging messages
+echo -ooodebug-disable-task-mem-pool this is a tricky module, disable for simpler runtime
+echo -mempool-detect-misuse turn on to find code misusing pool-allocated records
+echo -rcr turn on runtime conflict resolver
+echo -rcr_debug Shows weakly connected heaproots and which allocation sites were considered for traversal
+echo -rcr_debug_verbose in addition to above, also prints out effects passed in, internal representation of effects, and internal representation of reach graph
+echo -squeue use single queue
+echo -corepin use core pinning
+echo -nostalltr turn off RCR traversers that only handle conflicts between task and stallsite
+echo -nolock turn off synchronization lock
+echo
+echo Disjoint Reachability Analysis options
+echo -disjoint enable analysis
+echo -disjoint-k set k-limit for heap nodes per allocation site
+echo "-disjoint-write-dots <all/final> write reach graphs for all method sols. or only final sols."
+echo -disjoint-write-initial-contexts write reach graphs for callee initial contexts from all call sites
+echo -disjoint-write-ihms write reach graphs for each call site\'s Initial Heap Model
+echo "-disjoint-alias-file <filename> <normal/tabbed> write sharing for normal human reading or LaTeX tabbed"
+echo "-disjoint-debug-callsite <callee> <caller> <visit to start> <num caps> <T/F stop after>"
+echo " To debug call site, give callee caller symbols (ie foo) the analysis visit to start capturing, num captures to take, and whether to halt analysis after capturing"
+echo "-disjoint-debug-snap-method <method> <visit to start> <num caps> <T/F stop after>"
+echo " To take snapshots at statements, give method symbol, the analysis visit to start capturing, num captures to take, and whether to halt analsyis after capturing"
+echo "-disjoint-dvisit-stack use stack strat to visit descriptors (tasks or methods)"
+echo -disjoint-dvisit-stack-callees-on-top alternate stack strat
+echo -disjoint-dvisit-pqueue use prio. q strat to visit descriptors
+echo -disjoint-desire-determinism set above interproc for determinism
+echo -disjoint-debug-scheduling debug when methods are scheduled for analysis
+echo
+echo -pointsto-check-v-runtime check allocation site of pointer targets at runtime to help verify heap analysis results
+echo
+echo "-mlp <num cores> <max sese age> build mlp code"
+echo -mlpdebug if mlp, report progress and interim results
+echo
echo DSM options
echo -dsm distributed shared memory
echo -abortreaders abort readers immediately
echo
echo BAMBOO Multicore options
echo -scheduling do task scheduling
+echo "-distributioninfo execute to collect distribution info for simulated annealing in multi-core version"
+echo "-disall execute to collect whole distribution"
+echo "-disstart specify the start number of distribution information collection"
echo -multicore generate multi-core version binary
echo "-numcore set the number of cores (should be used together with -multicore), defaultly set as 1"
-echo "-cacheflush enable cache flush in raw version binary (should be used togethere with -raw)"
echo "-interrupt generate raw version binary with interruption (should be used togethere with -raw)"
echo "-rawpath print out execute path information for raw version (should be used together with -raw)"
echo "-useprofile use profiling data for scheduling (should be used together with -raw)"
echo -printscheduling print out scheduling graphs
echo -printschedulesim print out scheduling simulator result graphs
-echo -abcclose close the array boundary check
+echo "-tilera_output_dir specify the output directory for the generated TILERA code"
echo "-tilera_bme generate tilera version binary for Bare Mental Environment (should be used together with -multicore"
-echo "-tilera_zlinux generate tilera version binary for Zero-Overhead Linux (should be used together with -multicore"
+echo "-tilera_zlinux generate tilera version binary for Zero-Overhead Linux with multi-process mode (should be used together with -multicore"
echo "-tileraconfig config tilera simulator/pci as nxm (should be used together with -tilera)"
echo "-raw generate raw version binary (should be used together with -multicore)"
echo "-rawconfig config raw simulator as 4xn (should be used together with -raw)"
-echo -threadsimulate generate multi-thread simulate version binary
+echo "-tilera_memprof build the memprof version (should be used together with -tilera_xx) "
+echo -accurateprofile build with accurate profile information including pre/post task processing info
+echo -profile_interrupt build with profile information of interrupts
+echo "-useio use standard io to output profiling data (should be used together with -raw and -profile), it only works with single core version"
+echo -gccachecoherent turns on the cache coherence during gc
+echo
+echo Multicore GC options
+echo -perfcount performance counters
+echo -memperfcount Memory performance counters
echo -multicoregc generate multi-core binary with garbage collection
+echo -pmc parallel collector
echo "-numcore4gc set the number of cores for gc (should be used together with -multicoregc), defaultly set as 0"
+echo "-gcmem_local set the gc shared memory allocation strategy as local (should be used together with -multicoregc)"
+echo "-gcmem_fixed set the gc shared memory allocation strategy as fixed (should be used together with -multicoregc)"
+echo "-gcmem_mixed set the gc shared memory allocation strategy as mixed (should be used together with -multicoregc)"
+echo "-gcmem_global set the gc shared memory allocation strategy as global (should be used together with -multicoregc)"
+echo "-gccache_local set the gc shared memory cache strategy as local (should be used together with -multicoregc)"
+echo "-gccache_ran set the gc shared memory cache strategy as random (should be used together with -multicoregc)"
+echo "-gccontroller_near set the gc shared memory to use the nearest controller for each core (should be used together with -multicoregc)"
+echo "-gccontroller_remote set the gc shared memory to use a remote controller for each core (should be used together with -multicoregc)"
+echo "-gcsmallpagesize(2) set the gc shared memory to use small page size (should be used together with -multicoregc)"
+echo "-gclargepagesize set the gc shared memory to use large page size (should be used together with -multicoregc)"
+echo "-gclargesharedheap(2) set the gc shared memory as large (should be used together with -multicoregc)"
+echo "-tilera_page_size set the page size in multicore code"
+echo "-tilera_page_size_bits set the page size bits in multicore code"
+echo "-tilera_num_blocks set the total number of blocks in multicore code"
+echo "-tilera_num_pages_per_block set the number of pages per block in multicore code"
+echo "-gccacheadapt setup as cacheadaptable mode (should be used together with -multicoregc)"
echo -gcprofile build with gcprofile options
-echo -accurateprofile build with accurate profile information including pre/post task processing info
-echo "-useio use standard io to output profiling data (should be used together with -raw and -profile), it only works with single core version"
+echo -mgc generate Multicore GC binary without task stuff
+echo -objectlockdebug generate OBJECT_LOCK_DEBUG code
+echo -gctbldebug generate GC_TBL_DEBUG code
+echo
+echo SSJava options
+echo -ssjava enables SSJava
+echo -ssjavadebug reports interim results
echo
echo Other options
+echo -jni enable jni
+echo -abcclose turnoff array boundary checks
echo -builddir setup different build directory
echo -robustroot set up the ROBUSTROOT to directory other than default one
echo -readset turn on readset
echo -64bit compile for 64 bit machine
echo -32bit compile for 32 bit machine
echo -joptimize java compiler optimizations
+echo -noloop turnoff loop optimizations
echo -recover compile task code
echo -fastcheck fast checkpointing for Bristlecone
echo -specdir directory
echo -optional enable optional
echo -debug generate debug symbols
echo -prefetch do prefetch analysis
+echo -heapsize-mb NUM set initial heap size in MB, default is 256
echo -garbagestats Print garbage collection statistics
echo -webinterface enable web interface
echo -runtimedebug printout runtime debug messages
echo -profile build with profile options
echo "-enable-assertions execute assert statements during compilation"
echo -justanalyze exit after compiler analyses complete
-echo "-distributioninfo execute to collect distribution info for simulated annealing in multi-core version"
-echo "-disall execute to collect whole distribution"
-echo "-disstart specify the start number of distribution information collection"
echo -assembly generate assembly
echo -recovery compile recovery code
echo -dsmtask support work and task class library
echo -recoverystats print out recovery record
+echo -src-after-pp prints source code after preprocessor to tmp.c
+echo -capture-null-dereferences generates code to warn before derefencing null
+echo -printlinenum print out line numbers in generated C codes
echo -help help
}
tmpbuilddirectory="tmpbuilddirectory"
+JNI=false
+SSJAVA=false
+SRCAFTERPP=false;
+COREPROF=false;
NUMA=false;
SANDBOX=false;
ABORTREADERS=false;
DSMRECOVERYRUNTIME=$ROBUSTROOT/Runtime/DSTM/interface_recovery/
REPAIRROOT=~/research/Repair/RepairCompiler/
CURDIR=`pwd`
+SQUEUE=false
DSMFLAG=false
DSMRECOVERY=false
FASTMEMCPY=false
CHECKFLAG=false
RECOVERFLAG=false
MLP_ON=false
+RCR=false
+RCR_DEBUG=false
+RCR_DEBUG_VERBOSE=false
MLPDEBUG=false
MULTICOREFLAG=false
RAWFLAG=false
TILERAFLAG=false
TILERABMEFLAG=false
TILERAZLINUXFLAG=false
+TILERAMEMPROFFLAG=false
TILERACONFIG=''
-CACHEFLUSHFLAG=false
+TILERACORES=''
RAWCONFIG=''
DEBUGFLAG=false
RAWPATHFLAG=false
PROFILEFLAG=false
GCPROFILEFLAG=false
+GCPROFILESFLAG=false
ACCURATEPROFILEFLAG=false
+PROFILEINTERRUPTFLAG=false
USEIOFLAG=false
INTERRUPTFLAG=false
THREADSIMULATEFLAG=false;
MULTICOREGCFLAG=false;
+PERFCOUNT=false;
+MEMPERFCOUNT=false;
+PMCFLAG=false;
+GCMEMLOCALFLAG=false;
+GCMEMFIXEDFLAG=false;
+GCMEMMIXEDFLAG=false;
+GCMEMGLOBALFLAG=false;
+GCCACHELOCALFLAG=false;
+GCCACHERANFLAG=false;
+GCCONTROLLERNEARFLAG=false;
+GCCONTROLLERREMOTEFLAG=false;
+GCSMALLPAGESIZEFLAG=false;
+GCLARGEPAGESIZEFLAG=false;
+GCLARGEPAGESIZE2FLAG=false;
+GCLARGESHAREDHEAPFLAG=false;
+GCSMALLPAGESIZEFLAG2=false;
+GCLARGESHAREDHEAPFLAG2=false;
+GCCACHEADAPTFLAG=false
+GCCACHEADAPTPOLICYFLAG=false
+GCCACHEADAPTPOLICY=''
+GCCACHESAMPLINGFLAG=false
+MGCFLAG=false
+MGCINTELFLAG=false
+OBJECTLOCKDEBUGFLAG=false
+GCTBLDEBUGFLAG=false
USEDMALLOC=false
THREADFLAG=false
FASTCHECK=false
EXITAFTERANALYSIS=false
ASSEMBLY=false
GCCORES=''
+TILERAN1COREFLAG=false
+TILERA56COREFLAG=false
+TILERAOUTPUTDIR="tilera"
+TILERA_PAGE_SIZE="0x10000"
+TILERA_PAGE_SIZE_BITS="16"
+TILERA_NUM_BLOCKS="20"
+TILERA_NUM_PAGES_PER_BLOCK="16"
+GCCACHECOHERENTFLAG=false
if [[ -z $1 ]]
then
then
printhelp
exit
+elif [[ $1 = '-jni' ]]
+then
+JNI=true
+JAVAOPTS="$JAVAOPTS -jni"
+EXTRAOPTIONS="$EXTRAOPTIONS -DJNI -I$ROBUSTROOT/Runtime/jni"
elif [[ $1 = '-justanalyze' ]]
then
EXITAFTERANALYSIS=true
+elif [[ $1 = '-capture-null-dereferences' ]]
+then
+JAVAOPTS="$JAVAOPTS -capture-null-dereferences"
+EXTRAOPTIONS="$EXTRAOPTIONS -DCAPTURE_NULL_DEREFERENCES"
+elif [[ $1 = '-src-after-pp' ]]
+then
+SRCAFTERPP=true
elif [[ $1 = '-assembly' ]]
then
ASSEMBLY=true
elif [[ $1 = '-mac' ]]
then
EXTRAOPTIONS="$EXTRAOPTIONS -DMAC"
+elif [[ $1 = '-squeue' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DSQUEUE"
+elif [[ $1 = '-corepin' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DCOREPIN"
+SQUEUE=true
elif [[ $1 = '-profile' ]]
then
PROFILEFLAG=true
elif [[ $1 = '-gcprofile' ]]
then
GCPROFILEFLAG=true
+elif [[ $1 = '-gcprofile_s' ]]
+then
+GCPROFILESFLAG=true
elif [[ $1 = '-accurateprofile' ]]
then
ACCURATEPROFILEFLAG=true
+elif [[ $1 = '-profile_interrupt' ]]
+then
+PROFILEINTERRUPTFLAG=true
elif [[ $1 = '-useio' ]]
then
USEIOFLAG=true
+elif [[ $1 = '-gccachecoherent' ]]
+then
+GCCACHECOHERENTFLAG=true
elif [[ $1 = '-taskstate' ]]
then
JAVAOPTS="$JAVAOPTS -taskstate"
elif [[ $1 = '-numcore' ]]
then
JAVAOPTS="$JAVAOPTS -numcore $2"
+TILERACORES="$2"
+if [[ "$2" -gt "1" ]]
+then
+TILERAN1COREFLAG=true
+if [[ "$2" -eq "56" ]]
+then
+TILERA56COREFLAG=true
+fi
+fi
shift
elif [[ $1 = '-numcore4gc' ]]
then
then
RAWFLAG=true
JAVAOPTS="$JAVAOPTS -raw"
+elif [[ $1 = '-tilera_output_dir' ]]
+then
+TILERAOUTPUTDIR="$2"
+shift
+elif [[ $1 = '-tilera_page_size' ]]
+then
+TILERA_PAGE_SIZE="$2"
+shift
+elif [[ $1 = '-tilera_page_size_bits' ]]
+then
+TILERA_PAGE_SIZE_BITS="$2"
+shift
+elif [[ $1 = '-tilera_num_blocks' ]]
+then
+TILERA_NUM_BLOCKS="$2"
+shift
+elif [[ $1 = '-tilera_num_pages_per_block' ]]
+then
+TILERA_NUM_PAGES_PER_BLOCK="$2"
+shift
elif [[ $1 = '-tilera_bme' ]]
then
TILERAFLAG=true
then
TILERAFLAG=true
TILERAZLINUXFLAG=true
+elif [[ $1 = '-tilera_memprof' ]]
+then
+TILERAMEMPROFFLAG=true
elif [[ $1 = '-tileraconfig' ]]
then
TILERACONFIG="$2"
shift
-elif [[ $1 = '-cacheflush' ]]
-then
-CACHEFLUSHFLAG=true
elif [[ $1 = '-rawconfig' ]]
then
RAWCONFIG="$2"
elif [[ $1 = '-interrupt' ]]
then
INTERRUPTFLAG=true
-elif [[ $1 = '-threadsimulate' ]]
-then
-THREADSIMULATEFLAG=true
elif [[ $1 = '-abcclose' ]]
then
JAVAOPTS="$JAVAOPTS -abcclose"
then
MULTICOREGCFLAG=true
JAVAOPTS="$JAVAOPTS -multicoregc"
+elif [[ $1 = '-pmc' ]]
+then
+PMCFLAG=true
+JAVAOPTS="$JAVAOPTS -pmc"
+elif [[ $1 = '-perfcount' ]]
+then
+PERFCOUNT=true
+elif [[ $1 = '-memperfcount' ]]
+then
+MEMPERFCOUNT=true
+elif [[ $1 = '-gcmem_local' ]]
+then
+GCMEMLOCALFLAG=true
+elif [[ $1 = '-gcmem_fixed' ]]
+then
+GCMEMFIXEDFLAG=true
+elif [[ $1 = '-gcmem_mixed' ]]
+then
+GCMEMMIXEDFLAG=true
+elif [[ $1 = '-gcmem_global' ]]
+then
+GCMEMGLOBALFLAG=true
+elif [[ $1 = '-gccache_local' ]]
+then
+GCCACHELOCALFLAG=true
+elif [[ $1 = '-gccache_ran' ]]
+then
+GCCACHERANFLAG=true
+elif [[ $1 = '-gccontroller_near' ]]
+then
+GCCONTROLLERNEARFLAG=true
+elif [[ $1 = '-gccontroller_remote' ]]
+then
+GCCONTROLLERREMOTEFLAG=true
+elif [[ $1 = '-gcsmallpagesize' ]]
+then
+GCSMALLPAGESIZEFLAG=true
+elif [[ $1 = '-gcsmallpagesize2' ]]
+then
+GCSMALLPAGESIZEFLAG2=true
+elif [[ $1 = '-gclargepagesize' ]]
+then
+GCLARGEPAGESIZEFLAG=true
+elif [[ $1 = '-gclargepagesize2' ]]
+then
+GCLARGEPAGESIZE2FLAG=true
+elif [[ $1 = '-gclargesharedheap' ]]
+then
+GCLARGESHAREDHEAPFLAG=true
+elif [[ $1 = '-gclargesharedheap2' ]]
+then
+GCLARGESHAREDHEAPFLAG2=true
+elif [[ $1 = '-gccacheadapt' ]]
+then
+GCCACHEADAPTFLAG=true
+elif [[ $1 = '-gccacheadaptpolicy' ]]
+then
+GCCACHEADAPTPOLICYFLAG=true
+GCCACHEADAPTPOLICY="$2"
+shift
+elif [[ $1 = '-gccachesampling' ]]
+then
+GCCACHESAMPLINGFLAG=true
+elif [[ $1 = '-mgc' ]]
+then
+MGCFLAG=true
+JAVAOPTS="$JAVAOPTS -mgc"
+elif [[ $1 = '-mgcintel' ]]
+then
+MGCINTELFLAG=true
+elif [[ $1 = '-objectlockdebug' ]]
+then
+OBJECTLOCKDEBUGFLAG=true
+JAVAOPTS="$JAVAOPTS -objectlockdebug"
+elif [[ $1 = '-gctbldebug' ]]
+then
+GCTBLDEBUGFLAG=true
elif [[ $1 = '-dmalloc' ]]
then
USEDMALLOC=true
elif [[ $1 = '-joptimize' ]]
then
JAVAOPTS="$JAVAOPTS -optimize"
+elif [[ $1 = '-noloop' ]]
+then
+JAVAOPTS="$JAVAOPTS -noloop"
elif [[ $1 = '-dcopts' ]]
then
JAVAOPTS="$JAVAOPTS -dcopts"
then
JAVAOPTS="$JAVAOPTS -minimize"
+elif [[ $1 = '-ooojava' ]]
+then
+MLP_ON=true
+JAVAOPTS="$JAVAOPTS -ooojava $2 $3"
+EXTRAOPTIONS="$EXTRAOPTIONS -DPRECISE_GC -lpthread -DMLP"
+shift
+shift
+
+elif [[ $1 = '-ooodebug-disable-task-mem-pool' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DOOO_DISABLE_TASKMEMPOOL"
+
+elif [[ $1 = '-ssjava' ]]
+then
+SSJAVA=true
+JAVAOPTS="$JAVAOPTS -ssjava"
+
+elif [[ $1 = '-ssjavadebug' ]]
+then
+JAVAOPTS="$JAVAOPTS -ssjavadebug"
+
+elif [[ $1 = '-mempool-detect-misuse' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DMEMPOOL_DETECT_MISUSE"
+
+elif [[ $1 = '-heapsize-mb' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DINITIALHEAPSIZE_MB=($2)"
+shift
+
+elif [[ $1 = '-nostalltr' ]]
+then
+JAVAOPTS="$JAVAOPTS -nostalltr"
+
+elif [[ $1 = '-printlinenum' ]]
+then
+JAVAOPTS="$JAVAOPTS -printlinenum"
+
+elif [[ $1 = '-rcr' ]]
+then
+JAVAOPTS="$JAVAOPTS -rcr"
+RCR=true
+EXTRAOPTIONS="$EXTRAOPTIONS -DRCR -I$ROBUSTROOT/Runtime/oooJava"
+
+elif [[ $1 = '-rcr_debug' ]]
+then
+JAVAOPTS="$JAVAOPTS -rcr_debug"
+RCR_DEBUG=true
+
+elif [[ $1 = '-rcr_debug_verbose' ]]
+then
+JAVAOPTS="$JAVAOPTS -rcr_debug_verbose"
+RCR_DEBUG_VERBOSE=true
+
+elif [[ $1 = '-debug-deque' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DDEBUG_DEQUE"
+
+elif [[ $1 = '-nolock' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DNOLOCK"
+
+elif [[ $1 = '-coreprof' ]]
+then
+COREPROF=true
+JAVAOPTS="$JAVAOPTS -coreprof"
+EXTRAOPTIONS="$EXTRAOPTIONS -DCOREPROF -I$ROBUSTROOT/Runtime/coreprof"
+
+elif [[ $1 = '-coreprof-eventwords' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DCP_MAXEVENTWORDS=($2)"
+shift
+
+elif [[ $1 = '-coreprof-checkoverflow' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -DCOREPROF_CHECKOVERFLOW"
+
+elif [[ $1 = '-coreprof-enable' ]]
+then
+EXTRAOPTIONS="$EXTRAOPTIONS -D$2"
+shift
+
elif [[ $1 = '-mlp' ]]
then
MLP_ON=true
BUILDDIR="$CURDIR/$tmpbuilddirectory"
+BAMBOORUNTIME=$ROBUSTROOT/Runtime/bamboo
+
cd $1
cd $CURDIR
shift
JAVAOPTS="$JAVAOPTS -struct structfile"
fi
+# for tilera code, generate multicorememsize.h
+./generate_memsize.sh ${TILERA_PAGE_SIZE} ${TILERA_PAGE_SIZE_BITS} ${TILERA_NUM_BLOCKS} ${TILERA_NUM_PAGES_PER_BLOCK} ${BUILDDIR}
+
+
+#########################
# Setup class path
+#########################
+if $JNI
+ then
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/classpath/ -classlibrary $ROBUSTROOT/classpath/vm/reference"
+
+elif $MGCINTELFLAG
+ then
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/MGC/ -classlibrary $ROBUSTROOT/ClassLibrary/MGC/gnu/"
+
+elif $MGCFLAG
+ then
+ #base multicore gc files
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/MGC/ -classlibrary $ROBUSTROOT/ClassLibrary/MGC/gnu/"
+
+elif $SSJAVA
+ then
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/SSJava"
-if $RECOVERFLAG
-then
-if $FASTCHECK
-then
-#fast transactions
-JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/FastCheck"
-else
-#base bristlecone files
-JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/Bristlecone"
-fi
else
-if $DSMFLAG
-then
-#dsm stuff
-JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/JavaDSM"
-elif $STM
-then
-JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/JavaSTM"
-elif $THREADFLAG
-then
-#threading java stuff
-JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/JavaThread"
+ if $RECOVERFLAG
+ then
+ if $FASTCHECK
+ then
+ #fast transactions
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/FastCheck"
+ else
+ #base bristlecone files
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/Bristlecone"
+ fi
+
+ elif $DSMFLAG
+ then
+ #dsm stuff
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/JavaDSM"
+
+ elif $STM
+ then
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/JavaSTM"
+
+ elif $THREADFLAG
+ then
+ #threading java stuff
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/JavaThread"
+
+ else
+ #base java stuff
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/Java"
+ fi
fi
-#base java stuff
-JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/Java"
+
+# everyone gets this except ssjava!
+if ! $SSJAVA
+ then
+ JAVAOPTS="$JAVAOPTS -classlibrary $ROBUSTROOT/ClassLibrary/ -classlibrary $ROBUSTROOT/ClassLibrary/gnu/"
fi
+#########################
+# end classpath
+#########################
+
+
# Build bristlecone/java sources
if $MULTICOREFLAG
-then
-if ! ${ROBUSTROOT}/ourjava -Xms50m -Xmx1500m $JAVAFORWARDOPTS -classpath $ROBUSTROOT/../cup/:$ROBUSTROOT Main.Main -classlibrary \
-$ROBUSTROOT/ClassLibrary/ -classlibrary $ROBUSTROOT/ClassLibrary/gnu/ \
--dir $BUILDDIR $JAVAOPTS $SRCFILES
-then exit $?
-fi
+ then
+ if ! ${ROBUSTROOT}/ourjava -Xms50m -Xmx1500m $JAVAFORWARDOPTS -classpath $ROBUSTROOT/../cup/:$ROBUSTROOT Main.Main \
+ -dir $BUILDDIR $JAVAOPTS $SRCFILES
+ then exit $?
+ fi
+
else
-#if ! ${ROBUSTROOT}/ourjava -Xms5m -Xmx100m $JAVAFORWARDOPTS -classpath $ROBUSTROOT/../cup/:$ROBUSTROOT Main.Main -classlibrary \
-if ! $NOJAVA
-then
-if ! ${ROBUSTROOT}/ourjava -Xms50m -Xmx1500m $JAVAFORWARDOPTS -classpath $ROBUSTROOT/../cup/:$ROBUSTROOT Main.Main -classlibrary \
-$ROBUSTROOT/ClassLibrary/ -classlibrary $ROBUSTROOT/ClassLibrary/gnu/ -dir $BUILDDIR -precise \
-$JAVAOPTS $SRCFILES
-then exit $?
-fi
-fi
+
+ if $MGCINTELFLAG
+ then
+ if ! ${ROBUSTROOT}/ourjava -Xms50m -Xmx1500m $JAVAFORWARDOPTS -classpath $ROBUSTROOT/../cup/:$ROBUSTROOT Main.Main $JAVAOPTS \
+ -dir $BUILDDIR -precise $SRCFILES
+ then exit $?
+ fi
+
+ else
+ if ! $NOJAVA
+ then
+ if ! ${ROBUSTROOT}/ourjava -Xms50m -Xmx1500m $JAVAFORWARDOPTS -classpath $ROBUSTROOT/../cup/:$ROBUSTROOT Main.Main \
+ -dir $BUILDDIR -precise $JAVAOPTS $SRCFILES
+ then exit $?
+ fi
+ fi
+ fi
fi
if $EXITAFTERANALYSIS
export RAWRGCCFLAGS="-DTASK -DMULTICORE -DRAW"
-if $CACHEFLUSHFLAG
-then # print path
-RAWRGCCFLAGS="${RAWRGCCFLAGS} -DCACHEFLUSH"
-fi
-
if $RAWPATHFLAG
then # print path
RAWRGCCFLAGS="${RAWRGCCFLAGS} -DRAWPATH"
MAKEFILE="$MAKEFILE.$RAWCONFIG"
fi #useio version
-cp $ROBUSTROOT/Runtime/RAW/$MAKEFILE ./Makefile
+cp $BAMBOORUNTIME/RAW/$MAKEFILE ./Makefile
cp ../Runtime/*.c ./
cp ../Runtime/*.h ./
cp ../Runtime/*.S ./
cp ../Runtime/*.s ./
-cp ../Runtime/RAW/*.c ./
-cp ../Runtime/RAW/*.h ./
-cp ../Runtime/RAW/*.S ./
-cp ../Runtime/RAW/*.s ./
+cp $BAMBOORUNTIME/*.c ./
+cp $BAMBOORUNTIME/*.h ./
+cp $BAMBOORUNTIME/RAW/*.c ./
+cp $BAMBOORUNTIME/RAW/*.h ./
+cp $BAMBOORUNTIME/RAW/*.S ./
+cp $BAMBOORUNTIME/RAW/*.s ./
cp ../$tmpbuilddirectory/*.c ./
cp ../$tmpbuilddirectory/*.h ./
elif $TILERAFLAG
then # TILERAFLAG
-TILERADIR="$CURDIR/tilera"
+TILERADIR="$CURDIR/${TILERAOUTPUTDIR}"
if $TILERABMEFLAG
then # TILERABMEFLAG
TILERA_INDIR="BME"
-MAKEFILE="Makefile.tilera.$TILERACONFIG"
-SIMHVC="sim.hvc.$TILERACONFIG"
-PCIHVC="pci.hvc.$TILERACONFIG"
+MAKEFILE="Makefile.tilera.$TILERACORES"
+#SIMHVC="sim.hvc.$TILERACONFIG"
+PCIHVC="pci.hvc.$TILERACORES"
+if $TILERA56COREFLAG
+then
+ PCIHVC="$PCIHVC.56"
+fi
elif $TILERAZLINUXFLAG
then # TILERAZLINUXFLAG
TILERA_INDIR="ZLinux"
MAKEFILE="Makefile.tilera.$TILERACONFIG"
fi
+
mkdir $TILERADIR
cd $TILERADIR
make clean
rm ./*
+if $MGCFLAG
+then
+export TILERACFLAGS="-DMULTICORE -DCLOSE_PRINT -DTILERA"
+else
export TILERACFLAGS="-DTASK -DMULTICORE -DCLOSE_PRINT -DTILERA"
+fi
+
+if $GCTBLDEBUGFLAG
+then
+TILERACFLAGS="${TILERACFLAGS} -DGC_TBL_DEBUG"
+fi
+
+if $OBJECTLOCKDEBUGFLAG
+then
+TILERACFLAGS="${TILERACFLAGS} -DOBJECT_LOCK_DEBUG"
+fi
+
+if $TILERAMEMPROFFLAG
+then # not only with 1 core
+ PCIHVC="$PCIHVC.memprof"
+ TILERACFLAGS="${TILERACFLAGS} -DBAMBOO_MEMPROF"
+fi
if $TILERABMEFLAG
then # TILERABMEFLAG
TILERACFLAGS="${TILERACFLAGS} -DTILERA_ZLINUX"
fi
-if $CACHEFLUSHFLAG
-then # print path
-TILERACFLAGS="${TILERACFLAGS} -DCACHEFLUSH"
-fi
-
if $RAWPATHFLAG
then # print path
TILERACFLAGS="${TILERACFLAGS} -DRAWPATH"
TILERACFLAGS="${TILERACFLAGS} -DACCURATEPROFILE"
fi
+if $PROFILEINTERRUPTFLAG
+then # profile_interrupt version
+TILERACFLAGS="${TILERACFLAGS} -DPROFILE_INTERRUPT"
+fi
+
if $USEIOFLAG
then # useio version
TILERACFLAGS="${TILERACFLAGS} -DUSEIO"
TILERACFLAGS="${TILERACFLAGS} -DINTERRUPT"
fi #INTERRUPT version
+if $MGCFLAG
+then #MGCFLAG
+TILERACFLAGS="${TILERACFLAGS} -DMGC -DMGC_SPEC"
+fi
+
if $MULTICOREGCFLAG
then #MULTICOREGC version
TILERACFLAGS="${TILERACFLAGS} -DMULTICORE_GC -D${GCCORES}"
fi
+if $PMCFLAG
+then #MULTICOREGC version
+TILERACFLAGS="${TILERACFLAGS} -DPMC_GC -D${GCCORES}"
+fi
+
+if $PERFCOUNT
+then #MULTICOREGC version
+TILERACFLAGS="${TILERACFLAGS} -DPERFCOUNT"
+fi
+
+if $MEMPERFCOUNT
+then #MULTICOREGC version
+TILERACFLAGS="${TILERACFLAGS} -DMEMPERFCOUNT"
+fi
+
if $GCPROFILEFLAG
then # GC_PROFILE version
TILERACFLAGS="${TILERACFLAGS} -DGC_PROFILE"
fi
+if $GCPROFILESFLAG
+then # GC_PROFILE_S version
+TILERACFLAGS="${TILERACFLAGS} -DGC_PROFILE_S"
+fi
+
+if $GCMEMLOCALFLAG
+then # SMEMLOCAL version
+TILERACFLAGS="${TILERACFLAGS} -DSMEML"
+fi
+
+if $GCMEMFIXEDFLAG
+then # SMEMFIXED version
+TILERACFLAGS="${TILERACFLAGS} -DSMEMF"
+fi
+
+if $GCMEMMIXEDFLAG
+then # SMEMMIXED version
+TILERACFLAGS="${TILERACFLAGS} -DSMEMM"
+fi
+
+if $GCMEMGLOBALFLAG
+then # SMEMGLOBAL version
+TILERACFLAGS="${TILERACFLAGS} -DSMEMG"
+fi
+
+if $GCCACHELOCALFLAG
+then # CACHE_LOCAL version
+TILERACFLAGS="${TILERACFLAGS} -DCACHE_LOCAL"
+fi
+
+if $GCCACHERANFLAG
+then # CACHE_RAN version
+TILERACFLAGS="${TILERACFLAGS} -DCACHE_RAN"
+fi
+
+if $GCCONTROLLERNEARFLAG
+then # CONTROLLER_NEAR version
+TILERACFLAGS="${TILERACFLAGS} -DCONTROLLER_NEAR"
+fi
+
+if $GCCONTROLLERREMOTEFLAG
+then # CONTROLLER_REMOTE version
+TILERACFLAGS="${TILERACFLAGS} -DCONTROLLER_REMOTE"
+fi
+
+if $GCSMALLPAGESIZEFLAG
+then # GC_SMALLPAGESIZE version
+TILERACFLAGS="${TILERACFLAGS} -DGC_SMALLPAGESIZE"
+fi
+
+if $GCLARGEPAGESIZEFLAG
+then # GC_LARGEPAGESIZE version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGEPAGESIZE"
+fi
+
+if $GCLARGEPAGESIZE2FLAG
+then # GC_LARGEPAGESIZE2 version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGEPAGESIZE2"
+fi
+
+if $GCLARGESHAREDHEAPFLAG
+then # GC_LARGESHAREDHEAP version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGESHAREDHEAP"
+fi
+
+if $GCSMALLPAGESIZEFLAG2
+then # GC_SMALLPAGESIZE2 version
+TILERACFLAGS="${TILERACFLAGS} -DGC_SMALLPAGESIZE2"
+fi
+
+if $GCLARGESHAREDHEAPFLAG2
+then # GC_LARGESHAREDHEAP2 version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGESHAREDHEAP2"
+fi
+
+if $GCCACHEADAPTFLAG
+then # GC_CACHE_ADAPT version
+TILERACFLAGS="${TILERACFLAGS} -DGC_CACHE_ADAPT"
+fi
+
+if $GCCACHEADAPTPOLICYFLAG
+then # GC_CACHE_ADAPT version
+TILERACFLAGS="${TILERACFLAGS} -DGC_CACHE_ADAPT_POLICY${GCCACHEADAPTPOLICY}"
+fi
+
+if $GCCACHESAMPLINGFLAG
+then # GC_CACHE_ADAPT version
+TILERACFLAGS="${TILERACFLAGS} -DGC_CACHE_SAMPLING"
+fi
+
+if $GCCACHECOHERENTFLAG
+then # gc cache coherent version
+TILERACFLAGS="${TILERACFLAGS} -DGC_CACHE_COHERENT_ON"
+fi
+
+if $PMCFLAG
+then
+cp $ROBUSTROOT/Tilera/Runtime/PMC/$MAKEFILE ./Makefile
+elif $MGCFLAG
+then
+cp $ROBUSTROOT/Tilera/Runtime/MGC/$MAKEFILE ./Makefile
+else
cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/$MAKEFILE ./Makefile
+fi
if $TILERABMEFLAG
then # TILERABMEFLAG
-cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/$SIMHVC ./sim.hvc
+#cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/$SIMHVC ./sim.hvc
cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/$PCIHVC ./pci.hvc
+if $TILERA56COREFLAG
+then
+cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/bamboo-vmlinux-pci.hvc.56 ./bamboo-vmlinux-pci.hvc.56
+else
cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/bamboo-vmlinux-pci.hvc ./bamboo-vmlinux-pci.hvc
fi
-cp ../Runtime/multicoretask.c ./
-cp ../Runtime/multicoreruntime.c ./
+fi
cp ../Runtime/Queue.c ./
cp ../Runtime/file.c ./
cp ../Runtime/math.c ./
+if [ !$MGCFLAG ]
+then
cp ../Runtime/object.c ./
+fi
cp ../Runtime/GenericHashtable.c ./
cp ../Runtime/SimpleHash.c ./
cp ../Runtime/ObjectHash.c ./
cp ../Runtime/socket.c ./
cp ../Runtime/mem.c ./
-cp ../Runtime/multicoregarbage.c ./
-cp ../Runtime/MGCHash.c ./
cp ../Runtime/GenericHashtable.h ./
cp ../Runtime/mem.h ./
-cp ../Runtime/multicoreruntime.h ./
+if [ !$MGCFLAG ]
+then
cp ../Runtime/object.h ./
+fi
cp ../Runtime/ObjectHash.h ./
cp ../Runtime/Queue.h ./
cp ../Runtime/runtime.h ./
cp ../Runtime/SimpleHash.h ./
-cp ../Runtime/multicoregc.h ./
-cp ../Runtime/multicoregarbage.h ./
-cp ../Runtime/multicorehelper.h ./
-cp ../Runtime/MGCHash.h ./
+cp ../Runtime/objtypes.h ./
+cp $BAMBOORUNTIME/*.c ./
+cp $BAMBOORUNTIME/*.h ./
cp ../Tilera/Runtime/*.c ./
cp ../Tilera/Runtime/*.h ./
cp ../Tilera/Runtime/$TILERA_INDIR/*.c ./
then # TILERAZLINUXFLAG
cp ../Tilera/Runtime/$TILERA_INDIR/*.S ./
fi
+#if $TILERAMEMPROFFLAG
+#then # TILERAMEMPROFFLAG
+cp ../Tilera/Runtime/$TILERA_INDIR/linux_client.c ./
+#fi
+if $MGCFLAG
+then
+cp ../Tilera/Runtime/MGC/*.c ./
+cp ../Tilera/Runtime/MGC/*.h ./
+fi
cp ../Tilera/lib/* ./
cp ../$tmpbuilddirectory/*.c ./
cp ../$tmpbuilddirectory/*.h ./
+echo $TILERACFLAGS > ./tileracflags.txt
+
make
else #!RAWFLAG && !TILERABMEFLAG && ! TILERAZLINUXFLAG
if $MULTICOREFLAG
then
-RUNTIMEFILE="$ROBUSTROOT/Runtime/multicoreruntime.c $ROBUSTROOT/Runtime/multicoretask.c"
+RUNTIMEFILE="$BAMBOORUNTIME/multicoreruntime.c $BAMBOORUNTIME/multicoretask.c"
+INCLUDES="$INCLUDES -I$BAMBOORUNTIME"
else
RUNTIMEFILE="$ROBUSTROOT/Runtime/runtime.c $ROBUSTROOT/Runtime/task.c"
fi
$ROBUSTROOT/Runtime/SimpleHash.c $ROBUSTROOT/Runtime/option.c \
$ROBUSTROOT/Runtime/ObjectHash.c \
$ROBUSTROOT/Runtime/garbage.c $ROBUSTROOT/Runtime/socket.c \
+$ROBUSTROOT/Runtime/taskgarbage.c $ROBUSTROOT/Runtime/oojgarbage.c \
$ROBUSTROOT/Runtime/math.c \
$ROBUSTROOT/Runtime/GenericHashtable.c $ROBUSTROOT/Runtime/object.c"
+if $JNI
+then
+FILES="$FILES $ROBUSTROOT/Runtime/jni/jni.c $ROBUSTROOT/Runtime/jni/jni-stuff.c"
+fi
+
if $NUMA
then
FILES="$FILES $ROBUSTROOT/Runtime/affinity.c"
if $DSMRECOVERY
then
EXTRAOPTIONS="$EXTRAOPTIONS -lpthread -DCOMPILER -DDSTM -I$DSMRECOVERYRUNTIME"
-FILES="$FILES $DSMRECOVERYRUNTIME/trans.c $DSMRECOVERYRUNTIME/mcpileq.c $DSMRECOVERYRUNTIME/objstr.c $DSMRECOVERYRUNTIME/dstm.c $DSMRECOVERYRUNTIME/altmlookup.c $DSMRECOVERYRUNTIME/clookup.c $DSMRECOVERYRUNTIME/llookup.c $DSMRECOVERYRUNTIME/tlookup.c $DSMRECOVERYRUNTIME/threadnotify.c $DSMRECOVERYRUNTIME/dstmserver.c $DSMRECOVERYRUNTIME/plookup.c $DSMRECOVERYRUNTIME/ip.c $DSMRECOVERYRUNTIME/queue.c $DSMRECOVERYRUNTIME/prelookup.c $DSMRECOVERYRUNTIME/machinepile.c $ROBUSTROOT/Runtime/localobjects.c $ROBUSTROOT/Runtime/thread.c $DSMRECOVERYRUNTIME/sockpool.c $DSMRECOVERYRUNTIME/addUdpEnhance.c $DSMRECOVERYRUNTIME/signal.c $DSMRECOVERYRUNTIME/gCollect.c $DSMRECOVERYRUNTIME/addPrefetchEnhance.c $DSMRECOVERYRUNTIME/dsmlock.c"
+FILES="$FILES $DSMRECOVERYRUNTIME/trans.c $DSMRECOVERYRUNTIME/mcpileq.c $DSMRECOVERYRUNTIME/objstr.c $DSMRECOVERYRUNTIME/dstm.c $DSMRECOVERYRUNTIME/altmlookup.c $DSMRECOVERYRUNTIME/clookup.c $DSMRECOVERYRUNTIME/llookup.c $DSMRECOVERYRUNTIME/tlookup.c $DSMRECOVERYRUNTIME/threadnotify.c $DSMRECOVERYRUNTIME/dstmserver.c $DSMRECOVERYRUNTIME/plookup.c $DSMRECOVERYRUNTIME/ip.c $DSMRECOVERYRUNTIME/queue.c $DSMRECOVERYRUNTIME/altprelookup.c $DSMRECOVERYRUNTIME/machinepile.c $ROBUSTROOT/Runtime/localobjects.c $ROBUSTROOT/Runtime/thread.c $DSMRECOVERYRUNTIME/sockpool.c $DSMRECOVERYRUNTIME/addUdpEnhance.c $DSMRECOVERYRUNTIME/signal.c $DSMRECOVERYRUNTIME/gCollect.c $DSMRECOVERYRUNTIME/addPrefetchEnhance.c $DSMRECOVERYRUNTIME/dsmlock.c $DSMRECOVERYRUNTIME/translist.c $DSMRECOVERYRUNTIME/paxos.c"
else
EXTRAOPTIONS="$EXTRAOPTIONS -lpthread -DCOMPILER -DDSTM -I$DSMRUNTIME"
FILES="$FILES $DSMRUNTIME/trans.c $DSMRUNTIME/mcpileq.c $DSMRUNTIME/objstr.c $DSMRUNTIME/dstm.c $DSMRUNTIME/clookup.c $DSMRUNTIME/llookup.c $DSMRUNTIME/threadnotify.c $DSMRUNTIME/dstmserver.c $DSMRUNTIME/plookup.c $DSMRUNTIME/ip.c $DSMRUNTIME/queue.c $DSMRUNTIME/altprelookup.c $DSMRUNTIME/machinepile.c $ROBUSTROOT/Runtime/localobjects.c $ROBUSTROOT/Runtime/thread.c $DSMRUNTIME/sockpool.c $DSMRUNTIME/addUdpEnhance.c $DSMRUNTIME/signal.c $DSMRUNTIME/gCollect.c $DSMRUNTIME/addPrefetchEnhance.c $DSMRUNTIME/dsmlock.c $DSMRUNTIME/prefetch.c $DSMRUNTIME/altmlookup.c"
FILES="$FILES $ROBUSTROOT/Runtime/localobjects.c"
fi
+if $COREPROF
+then
+FILES="$FILES $ROBUSTROOT/Runtime/coreprof/coreprof.c"
+fi
+
+if $RCR
+then
+FILES="$FILES $tmpbuilddirectory/RuntimeConflictResolver.c $ROBUSTROOT/Runtime/oooJava/hashRCR.c $ROBUSTROOT/Runtime/oooJava/Queue_RCR.c $ROBUSTROOT/Runtime/oooJava/hashStructure.c $ROBUSTROOT/Runtime/oooJava/trqueue.c $ROBUSTROOT/Runtime/oooJava/rcr_runtime.c"
+fi
+
if $MLP_ON
then
FILES="$FILES $ROBUSTROOT/Runtime/mlp_runtime.c"
FILES="$FILES $ROBUSTROOT/Runtime/psemaphore.c"
FILES="$FILES $ROBUSTROOT/Runtime/workschedule.c"
+if ! $SQUEUE
+then
+FILES="$FILES $ROBUSTROOT/Runtime/deque.c"
+fi
fi
if $RECOVERFLAG
EXTRAOPTIONS="$EXTRAOPTIONS -ldmalloc -DDMALLOC"
fi
+echo Compiling C...
+echo EXTRAOPTIONS=$EXTRAOPTIONS
+
if $ASSEMBLY
then
gcc -S $INCLUDES $EXTRAOPTIONS -DPRECISE_GC \
if $MULTICOREFLAG
then
-gcc $INCLUDES $EXTRAOPTIONS \
-$tmpbuilddirectory/methods.c $FILES -lm -o $MAINFILE.bin
+NONMULTICOREOPTS=
else
-gcc $INCLUDES $EXTRAOPTIONS -DPRECISE_GC \
-$tmpbuilddirectory/methods.c $FILES -lm -o $MAINFILE.bin
+NONMULTICOREOPTS=-DPRECISE_GC
+fi
+
+if $SRCAFTERPP
+then
+gcc -E $INCLUDES $EXTRAOPTIONS $NONMULTICOREOPTS \
+$tmpbuilddirectory/methods.c $FILES > tmp.c
fi
+gcc $INCLUDES $EXTRAOPTIONS $NONMULTICOREOPTS \
+$tmpbuilddirectory/methods.c $FILES -lm -o $MAINFILE.bin
+
+
fi #!RAWFLAG