echo "-numa numa aware"
echo "-eventmonitor turn on transaction event trace recording"
echo
+echo OOOJava options
+echo -coreprof turn on profiling API
+echo "-ooojava <numberofcores> <maxseseage>"
+echo -ooodebug general OOOJava debugging messages
+echo -rcr turn on runtime conflict resolver
+echo
+echo Disjoint Reachability Analysis options
+echo -disjoint enable analysis
+echo -disjoint-k set k-limit for heap nodes per allocation site
+echo "-disjoint-write-dots <all/final> write reach graphs for all method sols. or only final sols."
+echo -disjoint-write-initial-contexts write reach graphs for callee initial contexts from all call sites
+echo -disjoint-write-ihms write reach graphs for each call site\'s Initial Heap Model
+echo "-disjoint-alias-file <filename> <normal/tabbed> write sharing for normal human reading or LaTeX tabbed"
+echo "-disjoint-debug-callsite <callee> <caller> <visit to start> <num caps> <T/F stop after>"
+echo " To debug call site, give callee caller symbols (ie foo) the analysis visit to start capturing, num captures to take, and whether to halt analysis after capturing"
+echo "-disjoint-debug-snap-method <method> <visit to start> <num caps> <T/F stop after>"
+echo " To take snapshots at statements, give method symbol, the analysis visit to start capturing, num captures to take, and whether to halt analsyis after capturing"
+echo "-disjoint-dvisit-stack use stack strat to visit descriptors (tasks or methods)"
+echo -disjoint-dvisit-stack-callees-on-top alternate stack strat
+echo -disjoint-dvisit-pqueue use prio. q strat to visit descriptors
+echo -disjoint-desire-determinism set above interproc for determinism
+echo -disjoint-debug-scheduling debug when methods are scheduled for analysis
+echo
+echo "-mlp <num cores> <max sese age> build mlp code"
+echo -mlpdebug if mlp, report progress and interim results
+echo
echo DSM options
echo -dsm distributed shared memory
echo -abortreaders abort readers immediately
echo "-useprofile use profiling data for scheduling (should be used together with -raw)"
echo -printscheduling print out scheduling graphs
echo -printschedulesim print out scheduling simulator result graphs
-echo -abcclose close the array boundary check
echo "-tilera_bme generate tilera version binary for Bare Mental Environment (should be used together with -multicore"
echo "-tilera_zlinux generate tilera version binary for Zero-Overhead Linux with multi-process mode (should be used together with -multicore"
echo "-tileraconfig config tilera simulator/pci as nxm (should be used together with -tilera)"
echo "-rawconfig config raw simulator as 4xn (should be used together with -raw)"
echo -multicoregc generate multi-core binary with garbage collection
echo "-numcore4gc set the number of cores for gc (should be used together with -multicoregc), defaultly set as 0"
+echo "-gcmem_local set the gc shared memory allocation strategy as local (should be used together with -multicoregc)"
+echo "-gcmem_fixed set the gc shared memory allocation strategy as fixed (should be used together with -multicoregc)"
+echo "-gcmem_mixed set the gc shared memory allocation strategy as mixed (should be used together with -multicoregc)"
+echo "-gcmem_global set the gc shared memory allocation strategy as global (should be used together with -multicoregc)"
+echo "-gccache_local set the gc shared memory cache strategy as local (should be used together with -multicoregc)"
+echo "-gccache_ran set the gc shared memory cache strategy as random (should be used together with -multicoregc)"
+echo "-gccontroller_near set the gc shared memory to use the nearest controller for each core (should be used together with -multicoregc)"
+echo "-gccontroller_remote set the gc shared memory to use a remote controller for each core (should be used together with -multicoregc)"
+echo "-gcsmallpagesize(2) set the gc shared memory to use small page size (should be used together with -multicoregc)"
+echo "-gclargepagesize set the gc shared memory to use large page size (should be used together with -multicoregc)"
+echo "-gclargesharedheap(2) set the gc shared memory as large (should be used together with -multicoregc)"
echo -gcprofile build with gcprofile options
+echo "-tilera_memprof build the memprof version (should be used together with -tilera_xx) "
echo -accurateprofile build with accurate profile information including pre/post task processing info
echo "-useio use standard io to output profiling data (should be used together with -raw and -profile), it only works with single core version"
echo
echo Other options
+echo -abcclose turnoff array boundary checks
echo -builddir setup different build directory
echo -robustroot set up the ROBUSTROOT to directory other than default one
echo -readset turn on readset
echo -64bit compile for 64 bit machine
echo -32bit compile for 32 bit machine
echo -joptimize java compiler optimizations
+echo -noloop turnoff loop optimizations
echo -recover compile task code
echo -fastcheck fast checkpointing for Bristlecone
echo -specdir directory
}
tmpbuilddirectory="tmpbuilddirectory"
+COREPROF=false;
NUMA=false;
SANDBOX=false;
ABORTREADERS=false;
TILERAFLAG=false
TILERABMEFLAG=false
TILERAZLINUXFLAG=false
+TILERAMEMPROFFLAG=false
TILERACONFIG=''
CACHEFLUSHFLAG=false
RAWCONFIG=''
RAWPATHFLAG=false
PROFILEFLAG=false
GCPROFILEFLAG=false
+GCPROFILESFLAG=false
ACCURATEPROFILEFLAG=false
USEIOFLAG=false
INTERRUPTFLAG=false
THREADSIMULATEFLAG=false;
MULTICOREGCFLAG=false;
+GCMEMLOCALFLAG=false;
+GCMEMFIXEDFLAG=false;
+GCMEMMIXEDFLAG=false;
+GCMEMGLOBALFLAG=false;
+GCCACHELOCALFLAG=false;
+GCCACHERANFLAG=false;
+GCCONTROLLERNEARFLAG=false;
+GCCONTROLLERREMOTEFLAG=false;
+GCSMALLPAGESIZEFLAG=false;
+GCLARGEPAGESIZEFLAG=false;
+GCLARGESHAREDHEAPFLAG=false;
+GCSMALLPAGESIZEFLAG2=false;
+GCLARGESHAREDHEAPFLAG2=false;
USEDMALLOC=false
THREADFLAG=false
FASTCHECK=false
EXITAFTERANALYSIS=false
ASSEMBLY=false
GCCORES=''
+GC1COREFLAG=false
+TILERAN1COREFLAG=false
if [[ -z $1 ]]
then
elif [[ $1 = '-gcprofile' ]]
then
GCPROFILEFLAG=true
+elif [[ $1 = '-gcprofile_s' ]]
+then
+GCPROFILESFLAG=true
elif [[ $1 = '-accurateprofile' ]]
then
ACCURATEPROFILEFLAG=true
elif [[ $1 = '-numcore' ]]
then
JAVAOPTS="$JAVAOPTS -numcore $2"
+if [[ "$2" -gt "1" ]]
+then
+TILERAN1COREFLAG=true
+fi
shift
elif [[ $1 = '-numcore4gc' ]]
then
JAVAOPTS="$JAVAOPTS -numcore4gc $2"
GCCORES="GC_$2"
+if [[ "$2" -eq "1" ]]
+then
+GC1COREFLAG=true
+fi
shift
elif [[ $1 = '-raw' ]]
then
then
TILERAFLAG=true
TILERAZLINUXFLAG=true
+elif [[ $1 = '-tilera_memprof' ]]
+then
+TILERAMEMPROFFLAG=true
elif [[ $1 = '-tileraconfig' ]]
then
TILERACONFIG="$2"
then
MULTICOREGCFLAG=true
JAVAOPTS="$JAVAOPTS -multicoregc"
+elif [[ $1 = '-gcmem_local' ]]
+then
+GCMEMLOCALFLAG=true
+elif [[ $1 = '-gcmem_fixed' ]]
+then
+GCMEMFIXEDFLAG=true
+elif [[ $1 = '-gcmem_mixed' ]]
+then
+GCMEMMIXEDFLAG=true
+elif [[ $1 = '-gcmem_global' ]]
+then
+GCMEMGLOBALFLAG=true
+elif [[ $1 = '-gccache_local' ]]
+then
+GCCACHELOCALFLAG=true
+elif [[ $1 = '-gccache_ran' ]]
+then
+GCCACHERANFLAG=true
+elif [[ $1 = '-gccontroller_near' ]]
+then
+GCCONTROLLERNEARFLAG=true
+elif [[ $1 = '-gccontroller_remote' ]]
+then
+GCCONTROLLERREMOTEFLAG=true
+elif [[ $1 = '-gcsmallpagesize' ]]
+then
+GCSMALLPAGESIZEFLAG=true
+elif [[ $1 = '-gcsmallpagesize2' ]]
+then
+GCSMALLPAGESIZEFLAG2=true
+elif [[ $1 = '-gclargepagesize' ]]
+then
+GCLARGEPAGESIZEFLAG=true
+elif [[ $1 = '-gclargesharedheap' ]]
+then
+GCLARGESHAREDHEAPFLAG=true
+elif [[ $1 = '-gclargesharedheap2' ]]
+then
+GCLARGESHAREDHEAPFLAG2=true
elif [[ $1 = '-dmalloc' ]]
then
USEDMALLOC=true
elif [[ $1 = '-joptimize' ]]
then
JAVAOPTS="$JAVAOPTS -optimize"
+elif [[ $1 = '-noloop' ]]
+then
+JAVAOPTS="$JAVAOPTS -noloop"
elif [[ $1 = '-dcopts' ]]
then
JAVAOPTS="$JAVAOPTS -dcopts"
then
JAVAOPTS="$JAVAOPTS -minimize"
+elif [[ $1 = '-ooojava' ]]
+then
+MLP_ON=true
+JAVAOPTS="$JAVAOPTS -ooojava $2 $3"
+EXTRAOPTIONS="$EXTRAOPTIONS -DPRECISE_GC -lpthread -DMLP"
+shift
+shift
+
+elif [[ $1 = '-rcr' ]]
+then
+JAVAOPTS="$JAVAOPTS -rcr"
+
+elif [[ $1 = '-coreprof' ]]
+then
+COREPROF=true
+JAVAOPTS="$JAVAOPTS -coreprof"
+EXTRAOPTIONS="$EXTRAOPTIONS -DCOREPROF -I$ROBUSTROOT/Runtime/coreprof"
+
elif [[ $1 = '-mlp' ]]
then
MLP_ON=true
MAKEFILE="Makefile.tilera.$TILERACONFIG"
SIMHVC="sim.hvc.$TILERACONFIG"
PCIHVC="pci.hvc.$TILERACONFIG"
+if $GC1COREFLAG
+then # 1-core gc
+ if $TILERAN1COREFLAG
+ then # not only with 1 core
+ PCIHVC="$PCIHVC.1gc"
+ fi
+fi
elif $TILERAZLINUXFLAG
then # TILERAZLINUXFLAG
TILERA_INDIR="ZLinux"
MAKEFILE="Makefile.tilera.$TILERACONFIG"
fi
+
mkdir $TILERADIR
cd $TILERADIR
make clean
export TILERACFLAGS="-DTASK -DMULTICORE -DCLOSE_PRINT -DTILERA"
+if $TILERAMEMPROFFLAG
+then # not only with 1 core
+ PCIHVC="$PCIHVC.memprof"
+ TILERACFLAGS="${TILERACFLAGS} -DBAMBOO_MEMPROF"
+fi
+
if $TILERABMEFLAG
then # TILERABMEFLAG
TILERACFLAGS="${TILERACFLAGS} -DTILERA_BME"
TILERACFLAGS="${TILERACFLAGS} -DGC_PROFILE"
fi
+if $GCPROFILESFLAG
+then # GC_PROFILE_S version
+TILERACFLAGS="${TILERACFLAGS} -DGC_PROFILE_S"
+fi
+
+if $GCMEMLOCALFLAG
+then # SMEMLOCAL version
+TILERACFLAGS="${TILERACFLAGS} -DSMEML"
+fi
+
+if $GCMEMFIXEDFLAG
+then # SMEMFIXED version
+TILERACFLAGS="${TILERACFLAGS} -DSMEMF"
+fi
+
+if $GCMEMMIXEDFLAG
+then # SMEMMIXED version
+TILERACFLAGS="${TILERACFLAGS} -DSMEMM"
+fi
+
+if $GCMEMGLOBALFLAG
+then # SMEMGLOBAL version
+TILERACFLAGS="${TILERACFLAGS} -DSMEMG"
+fi
+
+if $GCCACHELOCALFLAG
+then # CACHE_LOCAL version
+TILERACFLAGS="${TILERACFLAGS} -DCACHE_LOCAL"
+fi
+
+if $GCCACHERANFLAG
+then # CACHE_RAN version
+TILERACFLAGS="${TILERACFLAGS} -DCACHE_RAN"
+fi
+
+if $GCCONTROLLERNEARFLAG
+then # CONTROLLER_NEAR version
+TILERACFLAGS="${TILERACFLAGS} -DCONTROLLER_NEAR"
+fi
+
+if $GCCONTROLLERREMOTEFLAG
+then # CONTROLLER_REMOTE version
+TILERACFLAGS="${TILERACFLAGS} -DCONTROLLER_REMOTE"
+fi
+
+if $GCSMALLPAGESIZEFLAG
+then # GC_SMALLPAGESIZE version
+TILERACFLAGS="${TILERACFLAGS} -DGC_SMALLPAGESIZE"
+fi
+
+if $GCLARGEPAGESIZEFLAG
+then # GC_LARGEPAGESIZE version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGEPAGESIZE"
+fi
+
+if $GCLARGESHAREDHEAPFLAG
+then # GC_LARGESHAREDHEAP version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGESHAREDHEAP"
+fi
+
+if $GCSMALLPAGESIZEFLAG2
+then # GC_SMALLPAGESIZE2 version
+TILERACFLAGS="${TILERACFLAGS} -DGC_SMALLPAGESIZE2"
+fi
+
+if $GCLARGESHAREDHEAPFLAG2
+then # GC_LARGESHAREDHEAP2 version
+TILERACFLAGS="${TILERACFLAGS} -DGC_LARGESHAREDHEAP2"
+fi
+
+
cp $ROBUSTROOT/Tilera/Runtime/$TILERA_INDIR/$MAKEFILE ./Makefile
if $TILERABMEFLAG
then # TILERABMEFLAG
cp ../Runtime/object.c ./
cp ../Runtime/GenericHashtable.c ./
cp ../Runtime/SimpleHash.c ./
+cp ../Runtime/GCSharedHash.c ./
cp ../Runtime/ObjectHash.c ./
cp ../Runtime/socket.c ./
cp ../Runtime/mem.c ./
cp ../Runtime/Queue.h ./
cp ../Runtime/runtime.h ./
cp ../Runtime/SimpleHash.h ./
+cp ../Runtime/GCSharedHash.h ./
cp ../Runtime/multicoregc.h ./
cp ../Runtime/multicoregarbage.h ./
cp ../Runtime/multicorehelper.h ./
then # TILERAZLINUXFLAG
cp ../Tilera/Runtime/$TILERA_INDIR/*.S ./
fi
+#if $TILERAMEMPROFFLAG
+#then # TILERAMEMPROFFLAG
+cp ../Tilera/Runtime/$TILERA_INDIR/linux_client.c ./
+#fi
cp ../Tilera/lib/* ./
cp ../$tmpbuilddirectory/*.c ./
cp ../$tmpbuilddirectory/*.h ./
if $DSMRECOVERY
then
EXTRAOPTIONS="$EXTRAOPTIONS -lpthread -DCOMPILER -DDSTM -I$DSMRECOVERYRUNTIME"
-FILES="$FILES $DSMRECOVERYRUNTIME/trans.c $DSMRECOVERYRUNTIME/mcpileq.c $DSMRECOVERYRUNTIME/objstr.c $DSMRECOVERYRUNTIME/dstm.c $DSMRECOVERYRUNTIME/altmlookup.c $DSMRECOVERYRUNTIME/clookup.c $DSMRECOVERYRUNTIME/llookup.c $DSMRECOVERYRUNTIME/tlookup.c $DSMRECOVERYRUNTIME/threadnotify.c $DSMRECOVERYRUNTIME/dstmserver.c $DSMRECOVERYRUNTIME/plookup.c $DSMRECOVERYRUNTIME/ip.c $DSMRECOVERYRUNTIME/queue.c $DSMRECOVERYRUNTIME/prelookup.c $DSMRECOVERYRUNTIME/machinepile.c $ROBUSTROOT/Runtime/localobjects.c $ROBUSTROOT/Runtime/thread.c $DSMRECOVERYRUNTIME/sockpool.c $DSMRECOVERYRUNTIME/addUdpEnhance.c $DSMRECOVERYRUNTIME/signal.c $DSMRECOVERYRUNTIME/gCollect.c $DSMRECOVERYRUNTIME/addPrefetchEnhance.c $DSMRECOVERYRUNTIME/dsmlock.c $DSMRECOVERYRUNTIME/translist.c $DSMRECOVERYRUNTIME/paxos.c"
+FILES="$FILES $DSMRECOVERYRUNTIME/trans.c $DSMRECOVERYRUNTIME/mcpileq.c $DSMRECOVERYRUNTIME/objstr.c $DSMRECOVERYRUNTIME/dstm.c $DSMRECOVERYRUNTIME/altmlookup.c $DSMRECOVERYRUNTIME/clookup.c $DSMRECOVERYRUNTIME/llookup.c $DSMRECOVERYRUNTIME/tlookup.c $DSMRECOVERYRUNTIME/threadnotify.c $DSMRECOVERYRUNTIME/dstmserver.c $DSMRECOVERYRUNTIME/plookup.c $DSMRECOVERYRUNTIME/ip.c $DSMRECOVERYRUNTIME/queue.c $DSMRECOVERYRUNTIME/altprelookup.c $DSMRECOVERYRUNTIME/machinepile.c $ROBUSTROOT/Runtime/localobjects.c $ROBUSTROOT/Runtime/thread.c $DSMRECOVERYRUNTIME/sockpool.c $DSMRECOVERYRUNTIME/addUdpEnhance.c $DSMRECOVERYRUNTIME/signal.c $DSMRECOVERYRUNTIME/gCollect.c $DSMRECOVERYRUNTIME/addPrefetchEnhance.c $DSMRECOVERYRUNTIME/dsmlock.c $DSMRECOVERYRUNTIME/translist.c $DSMRECOVERYRUNTIME/paxos.c"
else
EXTRAOPTIONS="$EXTRAOPTIONS -lpthread -DCOMPILER -DDSTM -I$DSMRUNTIME"
FILES="$FILES $DSMRUNTIME/trans.c $DSMRUNTIME/mcpileq.c $DSMRUNTIME/objstr.c $DSMRUNTIME/dstm.c $DSMRUNTIME/clookup.c $DSMRUNTIME/llookup.c $DSMRUNTIME/threadnotify.c $DSMRUNTIME/dstmserver.c $DSMRUNTIME/plookup.c $DSMRUNTIME/ip.c $DSMRUNTIME/queue.c $DSMRUNTIME/altprelookup.c $DSMRUNTIME/machinepile.c $ROBUSTROOT/Runtime/localobjects.c $ROBUSTROOT/Runtime/thread.c $DSMRUNTIME/sockpool.c $DSMRUNTIME/addUdpEnhance.c $DSMRUNTIME/signal.c $DSMRUNTIME/gCollect.c $DSMRUNTIME/addPrefetchEnhance.c $DSMRUNTIME/dsmlock.c $DSMRUNTIME/prefetch.c $DSMRUNTIME/altmlookup.c"
FILES="$FILES $ROBUSTROOT/Runtime/localobjects.c"
fi
+if $COREPROF
+then
+FILES="$FILES $ROBUSTROOT/Runtime/coreprof/coreprof.c"
+fi
+
if $MLP_ON
then
FILES="$FILES $ROBUSTROOT/Runtime/mlp_runtime.c"
projects / IRC.git / blobdiff