ifneq ($(MakefileCommonIn),)
PreConditions += $(MakefileCommon)
endif
+
ifneq ($(MakefileConfigIn),)
PreConditions += $(MakefileConfig)
endif
ifdef ENABLE_PROFILING
BuildMode := Profile
- CXX.Flags := $(OPTIMIZE_OPTION) -pg
- C.Flags := $(OPTIMIZE_OPTION) -pg
- LD.Flags := $(OPTIMIZE_OPTION) -pg
+ CXX.Flags := $(OPTIMIZE_OPTION) -pg -g
+ C.Flags := $(OPTIMIZE_OPTION) -pg -g
+ LD.Flags := $(OPTIMIZE_OPTION) -pg -g
else
- ifdef ENABLE_OPTIMIZED
+ ifeq ($(ENABLE_OPTIMIZED),1)
BuildMode := Release
- # Don't use -fomit-frame-pointer on FreeBSD
+ # Don't use -fomit-frame-pointer on Darwin or FreeBSD.
ifneq ($(OS),FreeBSD)
- # Don't use -fomit-frame-pointer on Darwin, it breaks backtraces.
ifneq ($(OS),Darwin)
OmitFramePointer := -fomit-frame-pointer
endif
endif
+
+ # Darwin requires -fstrict-aliasing to be explicitly enabled.
+ ifeq ($(OS),Darwin)
+ EXTRA_OPTIONS += -fstrict-aliasing
+ endif
+
CXX.Flags := $(OPTIMIZE_OPTION) $(OmitFramePointer)
C.Flags := $(OPTIMIZE_OPTION) $(OmitFramePointer)
LD.Flags := $(OPTIMIZE_OPTION)
BuildMode := Debug
CXX.Flags := -g
C.Flags := -g
- LD.Flags := -g
+ LD.Flags := -g
KEEP_SYMBOLS := 1
endif
endif
+# IF REQUIRES_EH=1 is specified then don't disable exceptions
+ifndef REQUIRES_EH
+ CXX.Flags += -fno-exceptions
+endif
+
# If DISABLE_ASSERTIONS=1 is specified (make command line or configured),
# then disable assertions by defining the appropriate preprocessor symbols.
ifdef DISABLE_ASSERTIONS
C.Flags += -D_DEBUG
endif
-CXX.Flags += $(CXXFLAGS)
+CXX.Flags += $(CXXFLAGS) -Woverloaded-virtual
C.Flags += $(CFLAGS)
CPP.BaseFlags += $(CPPFLAGS)
LD.Flags += $(LDFLAGS)
AR.Flags := cru
LibTool.Flags := --tag=CXX
-#Make Floating point ieee complient on alpha
+# Make Floating point IEEE compliant on Alpha.
ifeq ($(ARCH),Alpha)
- CXX.Flags += -mieee
- CPP.BaseFlags += -mieee
+ CXX.Flags += -mieee -fPIC
+ CPP.BaseFlags += -mieee -fPIC
endif
#--------------------------------------------------------------------
LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT)
endif
ifndef TBLGEN
-TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
+ ifeq ($(LLVM_CROSS_COMPILING),1)
+ TBLGEN := $(LLVMToolDir)/tblgen$(BUILD_EXEEXT)
+ else
+ TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT)
+ endif
endif
+LLVM_CONFIG := $(LLVMToolDir)/llvm-config
ifndef GCCAS
GCCAS := $(LLVMToolDir)/gccas$(EXEEXT)
endif
ifndef GCCLD
GCCLD := $(LLVMToolDir)/gccld$(EXEEXT)
endif
-ifndef LDIS
+ifndef LLVMDIS
LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT)
endif
ifndef LLI
# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is
# to be built. Note that if LOADABLE_MODULE is specified then the resulting
-# shared library can be opened with dlopen
+# shared library can be opened with dlopen. Also, LOADABLE_MODULE implies
+# several other things so we force them to be defined/on.
+ifdef LOADABLE_MODULE
+ SHARED_LIBRARY := 1
+ DONT_BUILD_RELINKED := 1
+ LINK_LIBS_IN_SHARED := 1
+ LD.Flags += -module
+endif
+
ifdef SHARED_LIBRARY
LD.Flags += -rpath $(LibDir)
- ifdef LOADABLE_MODULE
- LD.Flags += -module
- endif
else
LibTool.Flags += --tag=disable-shared
endif
# Options To Invoke Tools
#----------------------------------------------------------
-CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -Wno-long-long \
- -pedantic $(EXTRA_OPTIONS)
+CompileCommonOpts := -pedantic -Wall -W -Wwrite-strings -Wno-long-long \
+ -Wunused -Wno-unused-parameter $(EXTRA_OPTIONS)
ifeq ($(OS),HP-UX)
CompileCommonOpts := -D_REENTRANT -D_HPUX_SOURCE
# If we are building a universal binary on Mac OS/X, pass extra options. This
# is useful to people that want to link the LLVM libraries into their universal
-# apps. The UNIVERSAL_SDK_PATH variable can optionally be specified as a path
-# to the SDK to use. For Mac OS/X 10.4 Intel machines, the traditional one is:
-# UNIVERSAL_SDK_PATH=/Developer/SDKs/MacOSX10.4u.sdk/
+# apps.
+#
+# The following can be optionally specified:
+# UNIVERSAL_SDK_PATH variable can be specified as a path to the SDK to use.
+# For Mac OS/X 10.4 Intel machines, the traditional one is:
+# UNIVERSAL_SDK_PATH=/Developer/SDKs/MacOSX10.4u.sdk/
+# UNIVERSAL_ARCH can be optionally specified to be a list of architectures
+# to build for, e.g. UNIVERSAL_ARCH="i386 ppc ppc64". This defaults to
+# i386/ppc only.
ifdef UNIVERSAL
- CompileCommonOpts += -arch i386 -arch ppc
- Relink.Flags := -XCClinker -arch -XCClinker i386 -XCClinker -arch \
- -XCClinker ppc
+ ifndef UNIVERSAL_ARCH
+ UNIVERSAL_ARCH := i386 ppc
+ endif
+ UNIVERSAL_ARCH_OPTIONS := $(UNIVERSAL_ARCH:%=-arch %)
+ CompileCommonOpts += $(UNIVERSAL_ARCH_OPTIONS)
+ Relink.Flags := $(UNIVERSAL_ARCH_OPTIONS:%=-XCClinker %)
ifdef UNIVERSAL_SDK_PATH
CompileCommonOpts += -isysroot $(UNIVERSAL_SDK_PATH)
Relink.Flags += -XCClinker -isysroot -XCClinker $(UNIVERSAL_SDK_PATH)
DISABLE_AUTO_DEPENDENCIES=1
endif
-# Temporary workaround for a Mac OSX compatibility issue.
-ifeq ($(OS),Darwin)
- CXX.Flags += -fno-use-cxa-atexit
-endif
-
LD.Flags += -L$(LibDir) -L$(LLVMLibDir)
CPP.BaseFlags += -D_GNU_SOURCE -D__STDC_LIMIT_MACROS
# All -I flags should go here, so that they don't confuse llvm-config.
-I$(LLVM_SRC_ROOT)/include \
$(CPP.BaseFlags)
-Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
+Compile.C = $(CC) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts) -c
LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
-BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
- $(C.Flags)
-Preprocess.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -E $(C.Flags)
+BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts)
+Preprocess.C = $(CC) $(CPP.Flags) $(C.Flags) $(CompileCommonOpts) -E
-Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
+Compile.CXX = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) -c
LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
-BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
- $(CXX.Flags)
+BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CXX.Flags) \
+ $(CompileCommonOpts)
+
Preprocess.CXX= $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -E
-Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
- $(CXX.Flags) $(CompileCommonOpts) $(LD.Flags) $(Strip)
-Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
- $(CXX.Flags) $(CompileCommonOpts) $(Relink.Flags)
+Link = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) \
+ $(LD.Flags) $(Strip)
+LTLink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Link)
+Relink = $(CXX) $(CPP.Flags) $(CXX.Flags) $(CompileCommonOpts) \
+ $(Relink.Flags)
+LTRelink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(Relink)
LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) \
$(Install.Flags)
ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755
SubDirs :=
ifdef DIRS
SubDirs += $(DIRS)
+
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
$(RecursiveTargets)::
$(Verb) for dir in $(DIRS); do \
if [ ! -f $$dir/Makefile ]; then \
fi; \
($(MAKE) -C $$dir $@ ) || exit 1; \
done
+else
+$(RecursiveTargets)::
+ $(Verb) for dir in $(DIRS); do \
+ ($(MAKE) -C $$dir $@ ) || exit 1; \
+ done
+endif
+
endif
#---------------------------------------------------------
SubDirs += $(OPTIONAL_DIRS)
+ifneq ($(PROJ_SRC_ROOT),$(PROJ_OBJ_ROOT))
$(RecursiveTargets)::
$(Verb) for dir in $(OPTIONAL_DIRS); do \
if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\
($(MAKE) -C$$dir $@ ) || exit 1; \
fi \
done
+else
+$(RecursiveTargets)::
+ $(Verb) for dir in $(OPTIONAL_DIRS); do \
+ ($(MAKE) -C$$dir $@ ) || exit 1; \
+ done
+endif
endif
#---------------------------------------------------------
# Set up variables for building libararies
###############################################################################
-#---------------------------------------------------------
-# Handle the special "JIT" value for LLVM_LIBS which is a
-# shorthand for a bunch of libraries that get the correct
-# JIT support for a library or a tool that runs JIT.
-#---------------------------------------------------------
-ifeq ($(firstword $(LLVMLIBS)),config)
-LLVM_CONFIG := $(LLVM_SRC_ROOT)/utils/llvm-config/llvm-config
-LLVMLIBS := $(shell $(LLVM_CONFIG) --libnames $(wordlist 2,9999,$(LLVMLIBS)))
-LLVMLIBS := $(patsubst lib%.a,%.a,$(LLVMLIBS))
-LLVMLIBS := $(patsubst %.o,%,$(LLVMLIBS))
-endif
-
-ifeq ($(LLVMLIBS),JIT)
-
-# Make sure we can get our own symbols in the tool
-Link += -dlopen self
-
-# Generic JIT libraries
-JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
-
-# You can enable the X86 JIT on a non-X86 host by setting the flag
-# ENABLE_X86_JIT on the make command line. If not, it will still be
-# enabled automagically on an X86 host.
-ifeq ($(ARCH), x86)
- ENABLE_X86_JIT = 1
-endif
-
-# What the X86 JIT requires
-ifdef ENABLE_X86_JIT
- JIT_LIBS += LLVMX86 LLVMSelectionDAG
-endif
-
-# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
-# ENABLE_PPC_JIT on the make command line. If not, it will still be
-# enabled automagically on an PowerPC host.
-ifeq ($(ARCH), PowerPC)
- ENABLE_PPC_JIT = 1
-endif
-
-# What the PowerPC JIT requires
-ifdef ENABLE_PPC_JIT
- JIT_LIBS += LLVMPowerPC LLVMSelectionDAG
-endif
-
-# You can enable the Alpha JIT on a non-Alpha host by setting the flag
-# ENABLE_ALPHA_JIT on the make command line. If not, it will still be
-# enabled automagically on an Alpha host.
-ifeq ($(ARCH), Alpha)
- ENABLE_ALPHA_JIT = 1
-endif
-
-# What the Alpha JIT requires
-ifdef ENABLE_ALPHA_JIT
- JIT_LIBS += LLVMAlpha LLVMSelectionDAG
-endif
-
-LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts.a LLVMTransformUtils.a LLVMAnalysis.a \
- LLVMBCReader.a LLVMTarget.a LLVMCore.a LLVMSupport.a LLVMbzip2.a \
- LLVMSystem.a $(PLATFORMLIBDL)
-endif
-
#---------------------------------------------------------
# Define various command line options pertaining to the
# libraries needed when linking. There are "Proj" libs
# (defined by the user's project) and "LLVM" libs (defined
-# by the # LLVM project).
+# by the LLVM project).
#---------------------------------------------------------
+ifdef USEDLIBS
ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions))
+ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
+endif
+
+ifdef LLVMLIBS
LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
-ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs))
LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
+endif
+
+ifeq ($(strip $(filter clean clean-local dist-clean,$(MAKECMDGOALS))),)
+ifdef LINK_COMPONENTS
+
+# If LLVM_CONFIG doesn't exist, build it. This can happen if you do a make
+# clean in tools, then do a make in tools (instead of at the top level).
+$(LLVM_CONFIG):
+ @echo "*** llvm-config doesn't exist - rebuilding it."
+ @$(MAKE) -C $(PROJ_OBJ_ROOT)/tools/llvm-config
+
+$(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT): $(LLVM_CONFIG)
+
+ProjLibsOptions = $(shell $(LLVM_CONFIG) --libs $(LINK_COMPONENTS))
+ProjLibsPaths = $(LLVM_CONFIG) \
+ $(shell $(LLVM_CONFIG) --libfiles $(LINK_COMPONENTS))
+endif
+endif
###############################################################################
# Library Build Rules: Four ways to build a library
all-local:: $(LibName.LA)
ifdef LINK_LIBS_IN_SHARED
+ifdef LOADABLE_MODULE
+SharedLibKindMessage := "Loadable Module"
+else
+SharedLibKindMessage := "Shared Library"
+endif
$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
- $(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
- $(Verb) $(Link) -o $@ $(ObjectsLO) \
- $(ProjLibsOptions) $(LLVMLibsOptions)
+ $(Echo) Linking $(BuildMode) $(SharedLibKindMessage) \
+ $(LIBRARYNAME)$(SHLIBEXT)
+ $(Verb) $(LTLink) -o $@ $(ObjectsLO) $(ProjLibsOptions) \
+ $(LLVMLibsOptions)
$(Verb) $(LTInstall) $@ $(LibDir)
else
$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
- $(Verb) $(Link) -o $@ $(ObjectsLO)
+ $(Verb) $(LTLink) -o $@ $(ObjectsLO)
$(Verb) $(LTInstall) $@ $(LibDir)
endif
$(LibName.O): $(ObjectsO) $(LibDir)/.dir
$(Echo) Linking $(BuildMode) Object Library $(notdir $@)
- $(Verb) $(Relink) -o $@ $(ObjectsO)
+ $(Verb) $(LTRelink) -o $@ $(ObjectsO)
clean-local::
ifneq ($(strip $(LibName.O)),)
ToolBuildPath := $(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT)
endif
-#---------------------------------------------------------
-# Tell make that we need to rebuild subdirectories before
-# we can link the tool. This affects things like LLI which
-# has library subdirectories.
-#---------------------------------------------------------
-$(ToolBuildPath): $(addsuffix /.makeall, $(PARALLEL_DIRS))
-
#---------------------------------------------------------
# Provide targets for building the tools
#---------------------------------------------------------
$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths)
$(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg)
- $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
+ $(Verb) $(LTLink) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \
$(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS)
$(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) \
$(StripWarnMsg)
TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) \
$(LLVM_SRC_ROOT)/lib/Target/Target.td \
$(LLVM_SRC_ROOT)/lib/Target/TargetSelectionDAG.td \
- $(LLVM_SRC_ROOT)/include/llvm/CodeGen/ValueTypes.td)
+ $(LLVM_SRC_ROOT)/include/llvm/CodeGen/ValueTypes.td) \
+ $(wildcard $(LLVM_SRC_ROOT)/include/llvm/Intrinsics*.td)
INCFiles := $(filter %.inc,$(BUILT_SOURCES))
INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
.PRECIOUS: $(INCTMPFiles) $(INCFiles)
# Rule for building the bison based parsers...
$(PROJ_SRC_DIR)/%.cpp $(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.y
+ifneq ($(BISON),)
$(Echo) "Bisoning $*.y"
$(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
$(Verb) $(MV) -f $*.tab.c $(PROJ_SRC_DIR)/$*.cpp
$(Verb) $(MV) -f $*.tab.h $(PROJ_SRC_DIR)/$*.h
+else
+ $(Echo) "Bison of $*.y SKIPPED -- bison not found"
+endif
# IFF the .y file has changed since it was last checked into CVS, copy the .y
# file to .y.cvs and the generated .cpp/.h file to .cpp.cvs/.h.cvs. We use this
ifndef DISABLE_AUTO_DEPENDENCIES
# If its not one of the cleaning targets
-ifneq ($strip($(filter-out clean clean-local dist-clean,$(MAKECMDGOALS))),)
+ifneq ($(strip $(filter-out clean clean-local dist-clean,$(MAKECMDGOALS)))),)
# Get the list of dependency files
DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources)))