and use the interleaved 4 channel data.
-There are some control switchs affecting to the speaker connections:
+There are some control switches affecting to the speaker connections:
"Line-In Mode" - an enum control to change the behavior of line-in
jack. Either "Line-In", "Rear Output" or "Bass Output" can
MIDI CONTROLLER
---------------
-The MPU401-UART interface is disabled as default. You need to set
-module option "mpu_port" with a valid I/O port address to enable the
-MIDI support. The valid I/O ports are 0x300, 0x310, 0x320 and 0x330.
-Choose the value which doesn't conflict with other cards. With
-CMI8738 and newer chips, you can use "mpu_port=1" to use a PCI port
-address that does not conflict with any other card.
+With CMI8338 chips, the MPU401-UART interface is disabled as default.
+You need to set the module option "mpu_port" to a valid I/O port address
+to enable MIDI support. Valid I/O ports are 0x300, 0x310, 0x320 and
+0x330. Choose a value that doesn't conflict with other cards.
+
+With CMI8738 and newer chips, the MIDI interface is enabled by default
+and the driver automatically chooses a port address.
There is _no_ hardware wavetable function on this chip (except for
OPL3 synth below).