M68k M68k architecture is enabled.
These options have more detailed description inside of
Documentation/m68k/kernel-options.txt.
- MCA MCA bus support is enabled.
MDA MDA console support is enabled.
MIPS MIPS architecture is enabled.
MOUSE Appropriate mouse support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
V4L Video For Linux support is enabled.
+ VMMIO Driver for memory mapped virtio devices is enabled.
VGA The VGA console has been enabled.
VT Virtual terminal support is enabled.
WDT Watchdog support is enabled.
ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
time. See Documentation/dynamic-debug-howto.txt for
- details.
+ details. Deprecated, see dyndbg.
debug [KNL] Enable kernel debugging (events log level).
dscc4.setup= [NET]
+ dyndbg[="val"] [KNL,DYNAMIC_DEBUG]
+ module.dyndbg[="val"]
+ Enable debug messages at boot time. See
+ Documentation/dynamic-debug-howto.txt for details.
+
earlycon= [KNL] Output early console device and options.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
on: Turn realloc on
realloc same as realloc=on
noari do not use PCIe ARI.
+ pcie_scan_all Scan all possible PCIe devices. Otherwise we
+ only look for one device below a PCIe downstream
+ port.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/blockdev/ramdisk.txt.
- rcupdate.blimit= [KNL,BOOT]
+ rcutree.blimit= [KNL,BOOT]
Set maximum number of finished RCU callbacks to process
in one batch.
- rcupdate.qhimark= [KNL,BOOT]
+ rcutree.qhimark= [KNL,BOOT]
Set threshold of queued
RCU callbacks over which batch limiting is disabled.
- rcupdate.qlowmark= [KNL,BOOT]
+ rcutree.qlowmark= [KNL,BOOT]
Set threshold of queued RCU callbacks below which
batch limiting is re-enabled.
+ rcutree.rcu_cpu_stall_suppress= [KNL,BOOT]
+ Suppress RCU CPU stall warning messages.
+
+ rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
+ Set timeout for RCU CPU stall warning messages.
+
+ rcutorture.fqs_duration= [KNL,BOOT]
+ Set duration of force_quiescent_state bursts.
+
+ rcutorture.fqs_holdoff= [KNL,BOOT]
+ Set holdoff time within force_quiescent_state bursts.
+
+ rcutorture.fqs_stutter= [KNL,BOOT]
+ Set wait time between force_quiescent_state bursts.
+
+ rcutorture.irqreader= [KNL,BOOT]
+ Test RCU readers from irq handlers.
+
+ rcutorture.n_barrier_cbs= [KNL,BOOT]
+ Set callbacks/threads for rcu_barrier() testing.
+
+ rcutorture.nfakewriters= [KNL,BOOT]
+ Set number of concurrent RCU writers. These just
+ stress RCU, they don't participate in the actual
+ test, hence the "fake".
+
+ rcutorture.nreaders= [KNL,BOOT]
+ Set number of RCU readers.
+
+ rcutorture.onoff_holdoff= [KNL,BOOT]
+ Set time (s) after boot for CPU-hotplug testing.
+
+ rcutorture.onoff_interval= [KNL,BOOT]
+ Set time (s) between CPU-hotplug operations, or
+ zero to disable CPU-hotplug testing.
+
+ rcutorture.shuffle_interval= [KNL,BOOT]
+ Set task-shuffle interval (s). Shuffling tasks
+ allows some CPUs to go into dyntick-idle mode
+ during the rcutorture test.
+
+ rcutorture.shutdown_secs= [KNL,BOOT]
+ Set time (s) after boot system shutdown. This
+ is useful for hands-off automated testing.
+
+ rcutorture.stall_cpu= [KNL,BOOT]
+ Duration of CPU stall (s) to test RCU CPU stall
+ warnings, zero to disable.
+
+ rcutorture.stall_cpu_holdoff= [KNL,BOOT]
+ Time to wait (s) after boot before inducing stall.
+
+ rcutorture.stat_interval= [KNL,BOOT]
+ Time (s) between statistics printk()s.
+
+ rcutorture.stutter= [KNL,BOOT]
+ Time (s) to stutter testing, for example, specifying
+ five seconds causes the test to run for five seconds,
+ wait for five seconds, and so on. This tests RCU's
+ ability to transition abruptly to and from idle.
+
+ rcutorture.test_boost= [KNL,BOOT]
+ Test RCU priority boosting? 0=no, 1=maybe, 2=yes.
+ "Maybe" means test if the RCU implementation
+ under test support RCU priority boosting.
+
+ rcutorture.test_boost_duration= [KNL,BOOT]
+ Duration (s) of each individual boost test.
+
+ rcutorture.test_boost_interval= [KNL,BOOT]
+ Interval (s) between each boost test.
+
+ rcutorture.test_no_idle_hz= [KNL,BOOT]
+ Test RCU's dyntick-idle handling. See also the
+ rcutorture.shuffle_interval parameter.
+
+ rcutorture.torture_type= [KNL,BOOT]
+ Specify the RCU implementation to test.
+
+ rcutorture.verbose= [KNL,BOOT]
+ Enable additional printk() statements.
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
resume= [SWSUSP]
Specify the partition device for software suspend
+ Format:
+ {/dev/<dev> | PARTUUID=<uuid> | <int>:<int> | <hex>}
resume_offset= [SWSUSP]
Specify the offset from the beginning of the partition
video= [FB] Frame buffer configuration
See Documentation/fb/modedb.txt.
+ virtio_mmio.device=
+ [VMMIO] Memory mapped virtio (platform) device.
+
+ <size>@<baseaddr>:<irq>[:<id>]
+ where:
+ <size> := size (can use standard suffixes
+ like K, M and G)
+ <baseaddr> := physical base address
+ <irq> := interrupt number (as passed to
+ request_irq())
+ <id> := (optional) platform device id
+ example:
+ virtio_mmio.device=1K@0x100b0000:48:7
+
+ Can be used multiple times for multiple devices.
+
vga= [BOOT,X86-32] Select a particular video mode
See Documentation/x86/boot.txt and
Documentation/svga.txt.