-
-/// X86II - This namespace holds all of the target specific flags that
-/// instruction info tracks.
-///
-namespace X86II {
- enum {
- //===------------------------------------------------------------------===//
- // Instruction encodings. These are the standard/most common forms for X86
- // instructions.
- //
-
- // PseudoFrm - This represents an instruction that is a pseudo instruction
- // or one that has not been implemented yet. It is illegal to code generate
- // it, but tolerated for intermediate implementation stages.
- Pseudo = 0,
-
- /// Raw - This form is for instructions that don't have any operands, so
- /// they are just a fixed opcode value, like 'leave'.
- RawFrm = 1,
-
- /// AddRegFrm - This form is used for instructions like 'push r32' that have
- /// their one register operand added to their opcode.
- AddRegFrm = 2,
-
- /// MRMDestReg - This form is used for instructions that use the Mod/RM byte
- /// to specify a destination, which in this case is a register.
- ///
- MRMDestReg = 3,
-
- /// MRMDestMem - This form is used for instructions that use the Mod/RM byte
- /// to specify a destination, which in this case is memory.
- ///
- MRMDestMem = 4,
-
- /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte
- /// to specify a source, which in this case is a register.
- ///
- MRMSrcReg = 5,
-
- /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte
- /// to specify a source, which in this case is memory.
- ///
- MRMSrcMem = 6,
-
- /// MRM[0-7][rm] - These forms are used to represent instructions that use
- /// a Mod/RM byte, and use the middle field to hold extended opcode
- /// information. In the intel manual these are represented as /0, /1, ...
- ///
-
- // First, instructions that operate on a register r/m operand...
- MRM0r = 16, MRM1r = 17, MRM2r = 18, MRM3r = 19, // Format /0 /1 /2 /3
- MRM4r = 20, MRM5r = 21, MRM6r = 22, MRM7r = 23, // Format /4 /5 /6 /7
-
- // Next, instructions that operate on a memory r/m operand...
- MRM0m = 24, MRM1m = 25, MRM2m = 26, MRM3m = 27, // Format /0 /1 /2 /3
- MRM4m = 28, MRM5m = 29, MRM6m = 30, MRM7m = 31, // Format /4 /5 /6 /7
-
- // MRMInitReg - This form is used for instructions whose source and
- // destinations are the same register.
- MRMInitReg = 32,
-
- //// MRM_C1 - A mod/rm byte of exactly 0xC1.
- MRM_C1 = 33,
- MRM_C2 = 34,
- MRM_C3 = 35,
- MRM_C4 = 36,
- MRM_C8 = 37,
- MRM_C9 = 38,
- MRM_E8 = 39,
- MRM_F0 = 40,
- MRM_F8 = 41,
- MRM_F9 = 42,
-
- FormMask = 63,
-
- //===------------------------------------------------------------------===//
- // Actual flags...
-
- // OpSize - Set if this instruction requires an operand size prefix (0x66),
- // which most often indicates that the instruction operates on 16 bit data
- // instead of 32 bit data.
- OpSize = 1 << 6,
-
- // AsSize - Set if this instruction requires an operand size prefix (0x67),
- // which most often indicates that the instruction address 16 bit address
- // instead of 32 bit address (or 32 bit address in 64 bit mode).
- AdSize = 1 << 7,
-
- //===------------------------------------------------------------------===//
- // Op0Mask - There are several prefix bytes that are used to form two byte
- // opcodes. These are currently 0x0F, 0xF3, and 0xD8-0xDF. This mask is
- // used to obtain the setting of this field. If no bits in this field is
- // set, there is no prefix byte for obtaining a multibyte opcode.
- //
- Op0Shift = 8,
- Op0Mask = 0xF << Op0Shift,
-
- // TB - TwoByte - Set if this instruction has a two byte opcode, which
- // starts with a 0x0F byte before the real opcode.
- TB = 1 << Op0Shift,
-
- // REP - The 0xF3 prefix byte indicating repetition of the following
- // instruction.
- REP = 2 << Op0Shift,
-
- // D8-DF - These escape opcodes are used by the floating point unit. These
- // values must remain sequential.
- D8 = 3 << Op0Shift, D9 = 4 << Op0Shift,
- DA = 5 << Op0Shift, DB = 6 << Op0Shift,
- DC = 7 << Op0Shift, DD = 8 << Op0Shift,
- DE = 9 << Op0Shift, DF = 10 << Op0Shift,
-
- // XS, XD - These prefix codes are for single and double precision scalar
- // floating point operations performed in the SSE registers.
- XD = 11 << Op0Shift, XS = 12 << Op0Shift,
-
- // T8, TA - Prefix after the 0x0F prefix.
- T8 = 13 << Op0Shift, TA = 14 << Op0Shift,
-
- // TF - Prefix before and after 0x0F
- TF = 15 << Op0Shift,
-
- //===------------------------------------------------------------------===//
- // REX_W - REX prefixes are instruction prefixes used in 64-bit mode.
- // They are used to specify GPRs and SSE registers, 64-bit operand size,
- // etc. We only cares about REX.W and REX.R bits and only the former is
- // statically determined.
- //
- REXShift = 12,
- REX_W = 1 << REXShift,
-
- //===------------------------------------------------------------------===//
- // This three-bit field describes the size of an immediate operand. Zero is
- // unused so that we can tell if we forgot to set a value.
- ImmShift = 13,
- ImmMask = 7 << ImmShift,
- Imm8 = 1 << ImmShift,
- Imm8PCRel = 2 << ImmShift,
- Imm16 = 3 << ImmShift,
- Imm16PCRel = 4 << ImmShift,
- Imm32 = 5 << ImmShift,
- Imm32PCRel = 6 << ImmShift,
- Imm64 = 7 << ImmShift,
-
- //===------------------------------------------------------------------===//
- // FP Instruction Classification... Zero is non-fp instruction.
-
- // FPTypeMask - Mask for all of the FP types...
- FPTypeShift = 16,
- FPTypeMask = 7 << FPTypeShift,
-
- // NotFP - The default, set for instructions that do not use FP registers.
- NotFP = 0 << FPTypeShift,
-
- // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0
- ZeroArgFP = 1 << FPTypeShift,
-
- // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst
- OneArgFP = 2 << FPTypeShift,
-
- // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a
- // result back to ST(0). For example, fcos, fsqrt, etc.
- //
- OneArgFPRW = 3 << FPTypeShift,
-
- // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an
- // explicit argument, storing the result to either ST(0) or the implicit
- // argument. For example: fadd, fsub, fmul, etc...
- TwoArgFP = 4 << FPTypeShift,
-
- // CompareFP - 2 arg FP instructions which implicitly read ST(0) and an
- // explicit argument, but have no destination. Example: fucom, fucomi, ...
- CompareFP = 5 << FPTypeShift,
-
- // CondMovFP - "2 operand" floating point conditional move instructions.
- CondMovFP = 6 << FPTypeShift,
-
- // SpecialFP - Special instruction forms. Dispatch by opcode explicitly.
- SpecialFP = 7 << FPTypeShift,
-
- // Lock prefix
- LOCKShift = 19,
- LOCK = 1 << LOCKShift,
-
- // Segment override prefixes. Currently we just need ability to address
- // stuff in gs and fs segments.
- SegOvrShift = 20,
- SegOvrMask = 3 << SegOvrShift,
- FS = 1 << SegOvrShift,
- GS = 2 << SegOvrShift,
-
- // Execution domain for SSE instructions in bits 22, 23.
- // 0 in bits 22-23 means normal, non-SSE instruction.
- SSEDomainShift = 22,
-
- OpcodeShift = 24,
- OpcodeMask = 0xFF << OpcodeShift,
-
- //===------------------------------------------------------------------===//
- // VEX - The opcode prefix used by AVX instructions
- VEX = 1ULL << 32,
-
- // VEX_W - Has a opcode specific functionality, but is used in the same
- // way as REX_W is for regular SSE instructions.
- VEX_W = 1ULL << 33,
-
- // VEX_4V - Used to specify an additional AVX/SSE register. Several 2
- // address instructions in SSE are represented as 3 address ones in AVX
- // and the additional register is encoded in VEX_VVVV prefix.
- VEX_4V = 1ULL << 34,
-
- // VEX_I8IMM - Specifies that the last register used in a AVX instruction,
- // must be encoded in the i8 immediate field. This usually happens in
- // instructions with 4 operands.
- VEX_I8IMM = 1ULL << 35
- };
-
- // getBaseOpcodeFor - This function returns the "base" X86 opcode for the
- // specified machine instruction.
- //
- static inline unsigned char getBaseOpcodeFor(uint64_t TSFlags) {
- return TSFlags >> X86II::OpcodeShift;
- }
-
- static inline bool hasImm(uint64_t TSFlags) {
- return (TSFlags & X86II::ImmMask) != 0;
- }
-
- /// getSizeOfImm - Decode the "size of immediate" field from the TSFlags field
- /// of the specified instruction.
- static inline unsigned getSizeOfImm(uint64_t TSFlags) {
- switch (TSFlags & X86II::ImmMask) {
- default: assert(0 && "Unknown immediate size");
- case X86II::Imm8:
- case X86II::Imm8PCRel: return 1;
- case X86II::Imm16:
- case X86II::Imm16PCRel: return 2;
- case X86II::Imm32:
- case X86II::Imm32PCRel: return 4;
- case X86II::Imm64: return 8;
- }
- }
-
- /// isImmPCRel - Return true if the immediate of the specified instruction's
- /// TSFlags indicates that it is pc relative.
- static inline unsigned isImmPCRel(uint64_t TSFlags) {
- switch (TSFlags & X86II::ImmMask) {
- default: assert(0 && "Unknown immediate size");
- case X86II::Imm8PCRel:
- case X86II::Imm16PCRel:
- case X86II::Imm32PCRel:
- return true;
- case X86II::Imm8:
- case X86II::Imm16:
- case X86II::Imm32:
- case X86II::Imm64:
- return false;
- }
- }
-
- /// getMemoryOperandNo - The function returns the MCInst operand # for the
- /// first field of the memory operand. If the instruction doesn't have a
- /// memory operand, this returns -1.
- ///
- /// Note that this ignores tied operands. If there is a tied register which
- /// is duplicated in the MCInst (e.g. "EAX = addl EAX, [mem]") it is only
- /// counted as one operand.
- ///
- static inline int getMemoryOperandNo(uint64_t TSFlags) {
- switch (TSFlags & X86II::FormMask) {
- case X86II::MRMInitReg: assert(0 && "FIXME: Remove this form");
- default: assert(0 && "Unknown FormMask value in getMemoryOperandNo!");
- case X86II::Pseudo:
- case X86II::RawFrm:
- case X86II::AddRegFrm:
- case X86II::MRMDestReg:
- case X86II::MRMSrcReg:
- return -1;
- case X86II::MRMDestMem:
- return 0;
- case X86II::MRMSrcMem: {
- bool HasVEX_4V = TSFlags & X86II::VEX_4V;
- unsigned FirstMemOp = 1;
- if (HasVEX_4V)
- ++FirstMemOp;// Skip the register source (which is encoded in VEX_VVVV).
-
- // FIXME: Maybe lea should have its own form? This is a horrible hack.
- //if (Opcode == X86::LEA64r || Opcode == X86::LEA64_32r ||
- // Opcode == X86::LEA16r || Opcode == X86::LEA32r)
- return FirstMemOp;
- }
- case X86II::MRM0r: case X86II::MRM1r:
- case X86II::MRM2r: case X86II::MRM3r:
- case X86II::MRM4r: case X86II::MRM5r:
- case X86II::MRM6r: case X86II::MRM7r:
- return -1;
- case X86II::MRM0m: case X86II::MRM1m:
- case X86II::MRM2m: case X86II::MRM3m:
- case X86II::MRM4m: case X86II::MRM5m:
- case X86II::MRM6m: case X86II::MRM7m:
- return 0;
- case X86II::MRM_C1:
- case X86II::MRM_C2:
- case X86II::MRM_C3:
- case X86II::MRM_C4:
- case X86II::MRM_C8:
- case X86II::MRM_C9:
- case X86II::MRM_E8:
- case X86II::MRM_F0:
- case X86II::MRM_F8:
- case X86II::MRM_F9:
- return -1;
- }
- }
-}