2 ##===- tools/llvm-config ---------------------------------------*- perl -*-===##
4 # The LLVM Compiler Infrastructure
6 # This file was developed by Eric Kidd and is distributed under
7 # the University of Illinois Open Source License. See LICENSE.TXT for details.
9 ##===----------------------------------------------------------------------===##
11 # Synopsis: Prints out compiler options needed to build against an installed
14 # Syntax: llvm-config OPTIONS... [COMPONENTS...]
16 ##===----------------------------------------------------------------------===##
22 #---- begin autoconf values ----
23 my $PACKAGE_NAME = q{@PACKAGE_NAME@};
24 my $VERSION = q{@PACKAGE_VERSION@};
25 my $PREFIX = q{@LLVM_PREFIX@};
26 my $LLVM_CONFIGTIME = q{@LLVM_CONFIGTIME@};
27 my $LLVM_SRC_ROOT = q{@abs_top_srcdir@};
28 my $LLVM_OBJ_ROOT = q{@abs_top_builddir@};
29 my $LLVM_ON_WIN32 = q{@LLVM_ON_WIN32@};
30 my $LLVM_ON_UNIX = q{@LLVM_ON_UNIX@};
31 my $LLVMGCCDIR = q{@LLVMGCCDIR@};
32 my $LLVMGCC = q{@LLVMGCC@};
33 my $LLVMGXX = q{@LLVMGXX@};
34 my $LLVMGCC_VERSION = q{@LLVMGCC_VERSION@};
35 my $LLVMGCC_MAJVERS = q{@LLVMGCC_MAJVERS@};
36 my $ENDIAN = q{@ENDIAN@};
37 my $SHLIBEXT = q{@SHLIBEXT@};
38 my $EXEEXT = q{@EXEEXT@};
40 my $ARCH = lc(q{@ARCH@});
41 my $TARGET_TRIPLE = q{@target@};
42 my $TARGETS_TO_BUILD = q{@TARGETS_TO_BUILD@};
43 my $TARGET_HAS_JIT = q{@TARGET_HAS_JIT@};
44 my @TARGETS_BUILT = map { lc($_) } qw{@TARGETS_TO_BUILD@};
45 #---- end autoconf values ----
47 # Must pretend x86_64 architecture is really x86, otherwise the native backend
48 # won't get linked in.
49 $ARCH = "x86" if $ARCH eq "x86_64";
51 #---- begin Makefile values ----
52 my $CFLAGS = q{@LLVM_CFLAGS@};
53 my $CXXFLAGS = q{@LLVM_CXXFLAGS@};
54 my $LDFLAGS = q{@LLVM_LDFLAGS@};
55 my $SYSTEM_LIBS = q{@LIBS@};
56 my $LLVM_BUILDMODE = q{@LLVM_BUILDMODE@};
57 #---- end Makefile values ----
59 # Figure out where llvm-config is being run from. Primarily, we care if it has
60 # been installed, or is running from the build directory, which changes the
61 # locations of some files.
63 # Convert the current executable name into its directory (e.g. ".").
64 my ($RUN_DIR) = ($0 =~ /^(.*)\/.*$/);
66 # Turn the directory into an absolute directory on the file system, also pop up
67 # from "bin" into the build or prefix dir.
68 my $ABS_RUN_DIR = `cd $RUN_DIR/..; pwd`;
71 # Compute the absolute object directory build, e.g. "foo/llvm/Debug".
72 my $ABS_OBJ_ROOT = "$LLVM_OBJ_ROOT/$LLVM_BUILDMODE";
73 $ABS_OBJ_ROOT = `cd $ABS_OBJ_ROOT; pwd` if (-d $ABS_OBJ_ROOT);
76 my $INCLUDEDIR = "$ABS_RUN_DIR/include";
77 my $LIBDIR = "$ABS_RUN_DIR/lib";
78 my $BINDIR = "$ABS_RUN_DIR/bin";
79 if ($ABS_RUN_DIR eq $ABS_OBJ_ROOT) {
80 # If we are running out of the build directory, the include dir is in the
82 $INCLUDEDIR = "$LLVM_SRC_ROOT/include";
84 # If installed, ignore the prefix the tree was configured with, use the
86 $PREFIX = $ABS_RUN_DIR;
90 sub fix_library_names (@);
91 sub fix_library_files (@);
92 sub expand_dependencies (@);
95 # Parse our command-line arguments.
100 my $want_libnames = 0;
101 my $want_libfiles = 0;
102 my $want_components = 0;
103 foreach my $arg (@ARGV) {
105 if ($arg eq "--version") {
106 $has_opt = 1; print "$VERSION\n";
107 } elsif ($arg eq "--prefix") {
108 $has_opt = 1; print "$PREFIX\n";
109 } elsif ($arg eq "--bindir") {
110 $has_opt = 1; print "$BINDIR\n";
111 } elsif ($arg eq "--includedir") {
112 $has_opt = 1; print "$INCLUDEDIR\n";
113 } elsif ($arg eq "--libdir") {
114 $has_opt = 1; print "$LIBDIR\n";
115 } elsif ($arg eq "--cflags") {
116 $has_opt = 1; print "-I$INCLUDEDIR $CFLAGS\n";
117 } elsif ($arg eq "--cxxflags") {
118 $has_opt = 1; print "-I$INCLUDEDIR $CXXFLAGS\n";
119 } elsif ($arg eq "--ldflags") {
120 $has_opt = 1; print "-L$LIBDIR $LDFLAGS $SYSTEM_LIBS\n";
121 } elsif ($arg eq "--libs") {
122 $has_opt = 1; $want_libs = 1;
123 } elsif ($arg eq "--libnames") {
124 $has_opt = 1; $want_libnames = 1;
125 } elsif ($arg eq "--libfiles") {
126 $has_opt = 1; $want_libfiles = 1;
127 } elsif ($arg eq "--components") {
128 $has_opt = 1; print join(' ', name_map_entries), "\n";
129 } elsif ($arg eq "--targets-built") {
130 $has_opt = 1; print join(' ', @TARGETS_BUILT), "\n";
131 } elsif ($arg eq "--host-target") {
132 $has_opt = 1; print "$TARGET_TRIPLE\n";
133 } elsif ($arg eq "--build-mode") {
134 $has_opt = 1; print "$LLVM_BUILDMODE\n";
135 } elsif ($arg eq "--obj-root") {
136 $has_opt = 1; print `cd $LLVM_OBJ_ROOT/; pwd`;
137 } elsif ($arg eq "--src-root") {
138 $has_opt = 1; print `cd $LLVM_SRC_ROOT/; pwd`;
143 push @components, $arg;
147 # If no options were specified, fail.
148 usage unless $has_opt;
150 # If no components were specified, default to 'all'.
151 if (@components == 0) {
152 push @components, 'all';
155 # Force component names to lower case.
156 @components = map lc, @components;
158 # Handle any arguments which require building our dependency graph.
159 if ($want_libs || $want_libnames || $want_libfiles) {
160 my @libs = expand_dependencies(@components);
161 print join(' ', fix_library_names(@libs)), "\n" if ($want_libs);
162 print join(' ', @libs), "\n" if ($want_libnames);
163 print join(' ', fix_library_files(@libs)), "\n" if ($want_libfiles);
168 #==========================================================================
170 #==========================================================================
173 print STDERR <<__EOD__;
174 Usage: llvm-config <OPTION>... [<COMPONENT>...]
176 Get various configuration information needed to compile programs which use
177 LLVM. Typically called from 'configure' scripts. Examples:
178 llvm-config --cxxflags
179 llvm-config --ldflags
180 llvm-config --libs engine bcreader scalaropts
183 --version Print LLVM version.
184 --prefix Print the installation prefix.
185 --src-root Print the source root LLVM was built from.
186 --obj-root Print the object root used to build LLVM.
187 --bindir Directory containing LLVM executables.
188 --includedir Directory containing LLVM headers.
189 --libdir Directory containing LLVM libraries.
190 --cflags C compiler flags for files that include LLVM headers.
191 --cxxflags C++ compiler flags for files that include LLVM headers.
192 --ldflags Print Linker flags.
193 --libs Libraries needed to link against LLVM components.
194 --libnames Bare library names for in-tree builds.
195 --libfiles Fully qualified library filenames for makefile depends.
196 --components List of all possible components.
197 --targets-built List of all targets currently built.
198 --build-mode Print build mode of LLVM tree (e.g. Debug or Release).
200 all All LLVM libraries (default).
201 backend Either a native backend or the C backend.
202 engine Either a native JIT or a bytecode interpreter.
207 # Use -lfoo instead of libfoo.a whenever possible, and add directories to
208 # files which can't be found using -L.
209 sub fix_library_names (@) {
212 foreach my $lib (@libs) {
213 # Transform the bare library name appropriately.
214 my ($basename) = ($lib =~ /^lib([^.]*)\.a/);
215 if (defined $basename) {
216 push @result, "-l$basename";
218 push @result, "$LIBDIR/$lib";
224 # Turn the list of libraries into a list of files.
225 sub fix_library_files(@) {
228 foreach my $lib (@libs) {
229 # Transform the bare library name into a filename.
230 push @result, "$LIBDIR/$lib";
235 #==========================================================================
236 # Library Dependency Analysis
237 #==========================================================================
238 # Given a few human-readable library names, find all their dependencies
239 # and sort them into an order which the linker will like. If we packed
240 # our libraries into fewer archives, we could make the linker do much
241 # of this work for us.
243 # Libraries have two different types of names in this code: Human-friendly
244 # "component" names entered on the command-line, and the raw file names
245 # we use internally (and ultimately pass to the linker).
247 # To understand this code, you'll need a working knowledge of Perl 5,
248 # and possibly some quality time with 'man perlref'.
250 sub load_dependencies;
252 sub have_native_backend;
253 sub find_best_engine;
254 sub expand_names (@);
255 sub find_all_required_sets (@);
256 sub find_all_required_sets_helper ($$@);
258 # Each "set" contains one or more libraries which must be included as a
259 # group (due to cyclic dependencies). Sets are represented as a Perl array
260 # reference pointing to a list of internal library names.
263 # Various mapping tables.
264 my %LIB_TO_SET_MAP; # Maps internal library names to their sets.
265 my %SET_DEPS; # Maps sets to a list of libraries they depend on.
266 my %NAME_MAP; # Maps human-entered names to internal names.
268 # Have our dependencies been loaded yet?
269 my $DEPENDENCIES_LOADED = 0;
271 # Given a list of human-friendly component names, translate them into a
272 # complete set of linker arguments.
273 sub expand_dependencies (@) {
276 my @required_sets = find_all_required_sets(expand_names(@libs));
277 my @sorted_sets = topologically_sort_sets(@required_sets);
279 # Expand the library sets into libraries.
281 foreach my $set (@sorted_sets) { push @result, @{$set}; }
285 # Load in the raw dependency data stored at the end of this file.
286 sub load_dependencies {
287 return if $DEPENDENCIES_LOADED;
288 $DEPENDENCIES_LOADED = 1;
291 my ($libs, $deps) = /^\s*([^:]+):\s*(.*)\s*$/;
292 die "Malformed dependency data" unless defined $deps;
293 my @libs = split(' ', $libs);
294 my @deps = split(' ', $deps);
296 # Record our dependency data.
299 foreach my $lib (@libs) { $LIB_TO_SET_MAP{$lib} = $set; }
300 $SET_DEPS{$set} = \@deps;
305 # Build a map converting human-friendly component names into internal
308 # Add entries for all the actual libraries.
309 foreach my $set (@SETS) {
310 foreach my $lib (sort @$set) {
311 my $short_name = $lib;
312 $short_name =~ s/^(lib)?LLVM([^.]*)\..*$/$2/;
313 $short_name =~ tr/A-Z/a-z/;
314 $NAME_MAP{$short_name} = [$lib];
318 # Add virtual entries.
319 $NAME_MAP{'native'} = have_native_backend() ? [$ARCH] : [];
320 $NAME_MAP{'backend'} = have_native_backend() ? ['native'] : ['cbackend'];
321 $NAME_MAP{'engine'} = find_best_engine;
322 $NAME_MAP{'all'} = [name_map_entries]; # Must be last.
325 # Return true if we have a native backend to use.
326 sub have_native_backend {
328 foreach my $target (@TARGETS_BUILT) { $BUILT{$target} = 1; }
329 return defined $NAME_MAP{$ARCH} && defined $BUILT{$ARCH};
332 # Find a working subclass of ExecutionEngine for this platform.
333 sub find_best_engine {
334 if (have_native_backend && $TARGET_HAS_JIT) {
335 return ['jit', 'native'];
337 return ['interpreter'];
341 # Get all the human-friendly component names.
342 sub name_map_entries {
344 return sort keys %NAME_MAP;
347 # Map human-readable names to internal library names.
348 sub expand_names (@) {
351 foreach my $name (@names) {
352 if (defined $LIB_TO_SET_MAP{$name}) {
353 # We've hit bottom: An actual library name.
355 } elsif (defined $NAME_MAP{$name}) {
356 # We've found a short name to expand.
357 push @result, expand_names(@{$NAME_MAP{$name}});
359 print STDERR "llvm-config: unknown component name: $name\n";
366 # Given a list of internal library names, return all sets of libraries which
367 # will need to be included by the linker (in no particular order).
368 sub find_all_required_sets (@) {
372 find_all_required_sets_helper(\%sets_added, \@result, @libs);
376 # Recursive closures are pretty broken in Perl, so we're going to separate
377 # this function from find_all_required_sets and pass in the state we need
378 # manually, as references. Yes, this is fairly unpleasant.
379 sub find_all_required_sets_helper ($$@) {
380 my ($sets_added, $result, @libs) = @_;
381 foreach my $lib (@libs) {
382 my $set = $LIB_TO_SET_MAP{$lib};
383 next if defined $$sets_added{$set};
384 $$sets_added{$set} = 1;
386 find_all_required_sets_helper($sets_added, $result, @{$SET_DEPS{$set}});
390 # Print a list of sets, with a label. Used for debugging.
391 sub print_sets ($@) {
392 my ($label, @sets) = @_;
394 foreach my $set (@sets) { push @output, join(',', @$set); }
395 print "$label: ", join(';', @output), "\n";
398 # Returns true if $lib is a key in $added.
399 sub has_lib_been_added ($$) {
400 my ($added, $lib) = @_;
401 return defined $$added{$LIB_TO_SET_MAP{$lib}};
404 # Returns true if all the dependencies of $set appear in $added.
405 sub have_all_deps_been_added ($$) {
406 my ($added, $set) = @_;
407 #print_sets(" Checking", $set);
408 #print_sets(" Wants", $SET_DEPS{$set});
409 foreach my $lib (@{$SET_DEPS{$set}}) {
410 return 0 unless has_lib_been_added($added, $lib);
415 # Given a list of sets, topologically sort them using dependencies.
416 sub topologically_sort_sets (@) {
420 SCAN: while (@sets) { # We'll delete items from @sets as we go.
421 #print_sets("So far", reverse(@result));
422 #print_sets("Remaining", @sets);
423 for (my $i = 0; $i < @sets; ++$i) {
425 if (have_all_deps_been_added(\%added, $set)) {
428 #print "Removing $i.\n";
429 splice(@sets, $i, 1);
430 next SCAN; # Restart our scan.
433 die "Can't find a library with no dependencies";
435 return reverse(@result);
438 # Our library dependency data will be added after the '__END__' token, and will
439 # be read through the magic <DATA> filehandle.