target/linux/lantiq/dts/VR200v.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "VR200v - TP-LINK Archer VR200v";
   9
  10         chosen {
  11                 bootargs = "init=/etc/preinit";
  12         };
  13
  14         aliases {
  15                 led-boot = &power;
  16                 led-failsafe = &power;
  17
  18                 led-dsl = &dsl;
  19                 led-internet = &internet;
  20                 led-usb = &usb;
  21                 led-usb2 = &usb;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x7f00000>;
  26         };
  27
  28         fpi@10000000 {
  29                 gpio: pinmux@E100B10 {
  30                         pinctrl-names = "default";
  31                         pinctrl-0 = <&state_default>;
  32
  33                         state_default: pinmux {
  34                                 mdio {
  35                                         lantiq,groups = "mdio";
  36                                         lantiq,function = "mdio";
  37                                 };
  38                                 gphy-leds {
  39                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  40                                         lantiq,function = "gphy";
  41                                         lantiq,pull = <2>;
  42                                         lantiq,open-drain = <0>;
  43                                         lantiq,output = <1>;
  44                                 };
  45                                 phy-rst {
  46                                         lantiq,pins = "io42";
  47                                         lantiq,pull = <0>;
  48                                         lantiq,open-drain = <0>;
  49                                         lantiq,output = <1>;
  50                                 };
  51                                 pcie-rst {
  52                                         lantiq,pins = "io38";
  53                                         lantiq,pull = <0>;
  54                                         lantiq,output = <1>;
  55                                 };
  56                         };
  57                         pins_spi_default: pins_spi_default {
  58                                 spi_in {
  59                                         lantiq,groups = "spi_di";
  60                                         lantiq,function = "spi";
  61                                 };
  62                                 spi_out {
  63                                         lantiq,groups = "spi_do", "spi_clk",
  64                                                 "spi_cs4";
  65                                         lantiq,function = "spi";
  66                                         lantiq,output = <1>;
  67                                 };
  68                         };
  69                 };
  70
  71                 ifxhcd@E101000 {
  72                         status = "okay";
  73                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  74                         lantiq,portmask = <0x3>;
  75                 };
  76
  77                 ifxhcd@E106000 {
  78                         status = "okay";
  79                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  80                 };
  81         };
  82
  83         gphy-xrx200 {
  84                 compatible = "lantiq,phy-xrx200";
  85                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  86                 phys = [ 00 01 ];
  87         };
  88
  89         gpio-keys-polled {
  90                 compatible = "gpio-keys-polled";
  91                 #address-cells = <1>;
  92                 #size-cells = <0>;
  93                 poll-interval = <100>;
  94                 reset {
  95                         label = "reset";
  96                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_RESTART>;
  98                 };
  99
 100                 wifi {
 101                         label = "wifi";
 102                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 103                         linux,code = <KEY_RFKILL>;
 104                         linux,input-type = <EV_SW>;
 105                 };
 106
 107                 wps {
 108                         label = "wps";
 109                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_WPS_BUTTON>;
 111                 };
 112
 113                 dect_paging {
 114                         label = "dect_paging";
 115                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 116                         linux,code = <KEY_PHONE>;
 117                 };
 118         };
 119
 120         gpio-leds {
 121                 compatible = "gpio-leds";
 122                 power: power {
 123                         label = "vr200v:blue:power";
 124                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 125                 };
 126                 dsl: dsl {
 127                         label = "vr200v:blue:dsl";
 128                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 129                 };
 130                 internet: internet {
 131                         label = "vr200v:blue:internet";
 132                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 133                 };
 134                 usb: usb {
 135                         label = "vr200v:blue:usb";
 136                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 137                 };
 138                 eth {
 139                         label = "vr200v:blue:lan";
 140                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
 141                 };
 142                 wlan {
 143                         label = "vr200v:blue:wlan";
 144                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
 145                 };
 146                 wlan5g {
 147                         label = "vr200v:blue:wlan5g";
 148                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 149                 };
 150                 phone {
 151                         label = "vr200v:blue:phone";
 152                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 153                 };
 154         };
 155 };
 156
 157 &spi {
 158         pinctrl-names = "default";
 159         pinctrl-0 = <&pins_spi_default>;
 160
 161         status = "ok";
 162
 163         m25p80@4 {
 164                 #address-cells = <1>;
 165                 #size-cells = <1>;
 166                 compatible = "jedec,spi-nor";
 167                 reg = <4 0>;
 168                 spi-max-frequency = <33250000>;
 169                 m25p,fast-read;
 170
 171                 partitions {
 172                         compatible = "fixed-partitions";
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175
 176                         partition@0 {
 177                                 reg = <0x0 0x20000>;
 178                                 label = "u-boot";
 179                                 read-only;
 180                         };
 181
 182                         partition@20000 {
 183                                 reg = <0x20000 0xf90000>;
 184                                 label = "firmware";
 185                         };
 186
 187                         partition@fb0000 {
 188                                 reg = <0xfb0000 0x10000>;
 189                                 label = "radioDECT";
 190                                 read-only;
 191                         };
 192
 193                         partition@fc0000 {
 194                                 reg = <0xfc0000 0x10000>;
 195                                 label = "config";
 196                                 read-only;
 197                         };
 198
 199                         romfile: partition@fd0000 {
 200                                 reg = <0xfd0000 0x10000>;
 201                                 label = "romfile";
 202                                 read-only;
 203                         };
 204
 205                         partition@fe0000 {
 206                                 reg = <0xfe0000 0x10000>;
 207                                 label = "rom";
 208                                 read-only;
 209                         };
 210
 211                         partition@ff0000 {
 212                                 reg = <0xff0000 0x10000>;
 213                                 label = "radio";
 214                                 read-only;
 215                         };
 216                 };
 217         };
 218 };
 219
 220 &eth0 {
 221         lan: interface@0 {
 222                 compatible = "lantiq,xrx200-pdi";
 223                 #address-cells = <1>;
 224                 #size-cells = <0>;
 225                 reg = <0>;
 226                 mtd-mac-address = <&romfile 0xf100>;
 227                 lantiq,switch;
 228
 229                 ethernet@0 {
 230                         compatible = "lantiq,xrx200-pdi-port";
 231                         reg = <0>;
 232                         phy-mode = "rgmii";
 233                         phy-handle = <&phy0>;
 234                         // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 235                 };
 236                 ethernet@5 {
 237                         compatible = "lantiq,xrx200-pdi-port";
 238                         reg = <5>;
 239                         phy-mode = "rgmii";
 240                         phy-handle = <&phy5>;
 241                 };
 242                 ethernet@2 {
 243                         compatible = "lantiq,xrx200-pdi-port";
 244                         reg = <2>;
 245                         phy-mode = "gmii";
 246                         phy-handle = <&phy11>;
 247                 };
 248                 ethernet@3 {
 249                         compatible = "lantiq,xrx200-pdi-port";
 250                         reg = <4>;
 251                         phy-mode = "gmii";
 252                         phy-handle = <&phy13>;
 253                 };
 254         };
 255
 256         mdio@0 {
 257                 #address-cells = <1>;
 258                 #size-cells = <0>;
 259                 compatible = "lantiq,xrx200-mdio";
 260                 phy0: ethernet-phy@0 {
 261                         reg = <0x0>;
 262                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 263                 };
 264                 phy5: ethernet-phy@5 {
 265                         reg = <0x5>;
 266                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 267                 };
 268                 phy11: ethernet-phy@11 {
 269                         reg = <0x11>;
 270                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 271                 };
 272                 phy13: ethernet-phy@13 {
 273                         reg = <0x13>;
 274                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 275                 };
 276         };
 277 };