lantiq: specify console using stdout-path instead of cmdline argument
[lede.git] / target / linux / lantiq / dts / ARV7510PW22.dts
1 /dts-v1/;
2
3 #include "danube.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8         model = "ARV7510PW22 - Astoria Networks";
9
10         chosen {
11                 bootargs = "init=/etc/preinit";
12         };
13
14         aliases {
15                 led-boot = &power;
16                 led-failsafe = &power;
17                 led-running = &power;
18
19                 led-internet = &internet;
20                 led-usb = &umts;
21                 led-wifi = &wlan;
22         };
23
24         memory@0 {
25                 reg = <0x0 0x4000000>;
26         };
27
28         sram@1F000000 {
29                 vmmc@107000 {
30                         status = "okay";
31                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
32                 };
33         };
34
35         fpi@10000000 {
36                 localbus@0 {
37                         nor-boot@0 {
38                                 compatible = "lantiq,nor";
39                                 bank-width = <2>;
40                                 reg = <0 0x0 0x1000000>;
41                                 #address-cells = <1>;
42                                 #size-cells = <1>;
43
44                                 partitions {
45                                         compatible = "fixed-partitions";
46                                         #address-cells = <1>;
47                                         #size-cells = <1>;
48
49                                         partition@0 {
50                                                 label = "uboot";
51                                                 reg = <0x00000 0x40000>;
52                                                 read-only;
53                                         };
54
55                                         partition@40000 {
56                                                 label = "uboot_env";
57                                                 reg = <0x40000 0x20000>;
58                                                 read-only;
59                                         };
60
61                                         partition@60000 {
62                                                 label = "firmware";
63                                                 reg = <0x60000 0xf80000>;
64                                         };
65
66                                         boardconfig: partition@fe0000 {
67                                                 label = "board_config";
68                                                 reg = <0xfe0000 0x20000>;
69                                                 read-only;
70                                         };
71                                 };
72                         };
73                 };
74
75                 gpio: pinmux@E100B10 {
76                         pinctrl-names = "default";
77                         pinctrl-0 = <&state_default>;
78
79                         state_default: pinmux {
80                                 exin {
81                                         lantiq,groups = "exin1";
82                                         lantiq,function = "exin";
83                                         lantiq,pull = <2>;
84                                         lantiq,output = <0>;
85                                 };
86                                 pci_in {
87                                         lantiq,groups = "req1", "req2";
88                                         lantiq,function = "pci";
89                                         lantiq,open-drain = <1>;
90                                         lantiq,pull = <2>;
91                                         lantiq,output = <0>;
92                                 };
93                                 pci_out {
94                                         lantiq,groups = "gnt1";
95                                         lantiq,function = "pci";
96                                         lantiq,output = <1>;
97                                 };
98                                 pci_rst {
99                                         lantiq,pins = "io21";
100                                         lantiq,pull = <2>;
101                                         lantiq,output = <1>;
102                                 };
103                                 pins_out {
104                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
105                                         lantiq,output = <1>;
106                                 };
107                                 pins_in {
108                                         lantiq,pins = "io11", "io12", "io28";
109                                         lantiq,open-drain = <1>;
110                                         lantiq,pull = <2>;
111                                         lantiq,output = <0>;
112                                 };
113                         };
114                 };
115
116                 ifxhcd@E101000 {
117                         status = "okay";
118                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
119                 };
120
121                 etop@E180000 {
122                         /* Switch reset 19 */
123                         phy-mode = "mii";
124                         mtd-mac-address = <&boardconfig 0x16>;
125                 };
126         };
127
128         gpio-keys-polled {
129                 compatible = "gpio-keys-polled";
130                 #address-cells = <1>;
131                 #size-cells = <0>;
132                 poll-interval = <100>;
133
134                 rfkill {
135                         label = "rfkill";
136                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
137                         linux,code = <KEY_RFKILL>;
138                 };
139                 restart {
140                         label = "restart";
141                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
142                         linux,code = <KEY_POWER>;
143                 };
144                 reset {
145                         label = "reset";
146                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
147                         linux,code = <KEY_RESTART>;
148                 };
149         };
150
151         gpio-leds {
152                 compatible = "gpio-leds";
153                 power: power {
154                         label = "power";
155                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
156                         default-state = "keep";
157                 };
158                 internet: internet {
159                         label = "internet";
160                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
161                 };
162                 wlan: wlan {
163                         label = "wlan";
164                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
165                 };
166                 umts: 3g {
167                         label = "3g";
168                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
169                 };
170                 message {
171                         label = "message";
172                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
173                 };
174         };
175 };
176
177 &pci0 {
178         status = "okay";
179         lantiq,external-clock;
180         interrupt-map = <
181                 0x7000 0 0 1 &icu0 30
182                 0x7800 0 0 1 &icu0 135
183                 0x7800 0 0 2 &icu0 135
184                 0x7800 0 0 3 &icu0 135
185         >;
186         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
187         req-mask = <0x3>;
188
189         wifi@1814,3592 {
190                 compatible = "pci1814,3592";
191                 reg = <0x7000 0 0 0 0>;
192                 ralink,mtd-eeprom = <&boardconfig 0x410>;
193                 ralink,mtd-eeprom-swap;
194         };
195 };