2 tristate "SoC I2S Audio for the ADI Blackfin chip"
4 select SND_BF5XX_SOC_SPORT if !BF60x
5 select SND_BF6XX_SOC_SPORT if BF60x
7 Say Y or M if you want to add support for codecs attached to
8 the Blackfin SPORT (synchronous serial ports) interface in I2S
9 mode (supports single stereo In/Out).
10 You will also need to select the audio interfaces to support below.
12 config SND_BF5XX_SOC_SSM2602
13 tristate "SoC SSM2602 Audio Codec Add-On Card support"
14 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
15 select SND_BF5XX_SOC_I2S if !BF60x
16 select SND_BF6XX_SOC_I2S if BF60x
17 select SND_SOC_SSM2602
19 Say Y if you want to add support for the Analog Devices
20 SSM2602 Audio Codec Add-On Card.
22 config SND_SOC_BFIN_EVAL_ADAU1701
23 tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
24 depends on SND_BF5XX_I2S && I2C
25 select SND_BF5XX_SOC_I2S
26 select SND_SOC_ADAU1701
28 Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
29 board connected to one of the Blackfin evaluation boards like the
30 BF5XX-STAMP or BF5XX-EZKIT.
32 config SND_SOC_BFIN_EVAL_ADAU1373
33 tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
34 depends on SND_BF5XX_I2S && I2C
35 select SND_BF5XX_SOC_I2S
36 select SND_SOC_ADAU1373
38 Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
39 board connected to one of the Blackfin evaluation boards like the
40 BF5XX-STAMP or BF5XX-EZKIT.
42 Note: This driver assumes that first ADAU1373 DAI is connected to the
43 first SPORT port on the BF5XX board.
45 config SND_SOC_BFIN_EVAL_ADAV80X
46 tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
47 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
48 select SND_BF5XX_SOC_I2S
49 select SND_SOC_ADAV80X
51 Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
52 EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
53 like the BF5XX-STAMP or BF5XX-EZKIT.
55 Note: This driver assumes that the ADAV80X digital record and playback
56 interfaces are connected to the first SPORT port on the BF5XX board.
58 config SND_BF5XX_SOC_AD1836
59 tristate "SoC AD1836 Audio support for BF5xx"
60 depends on SND_BF5XX_I2S && SPI_MASTER
61 select SND_BF5XX_SOC_I2S
64 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
66 config SND_BF5XX_SOC_AD193X
67 tristate "SoC AD193X Audio support for Blackfin"
68 depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
69 select SND_BF5XX_SOC_I2S
72 Say Y if you want to add support for AD193X codec on Blackfin.
73 This driver supports AD1936, AD1937, AD1938 and AD1939.
75 config SND_BF5XX_SOC_AD73311
76 tristate "SoC AD73311 Audio support for Blackfin"
77 depends on SND_BF5XX_I2S
78 select SND_BF5XX_SOC_I2S
79 select SND_SOC_AD73311
81 Say Y if you want to add support for AD73311 codec on Blackfin.
83 config SND_BFIN_AD73311_SE
84 int "PF pin for AD73311L Chip Select"
85 depends on SND_BF5XX_SOC_AD73311
88 Enter the GPIO used to control AD73311's SE pin. Acceptable
92 tristate "SoC AC97 Audio for the ADI BF5xx chip"
95 select SND_SOC_AC97_BUS
96 select SND_BF5XX_SOC_SPORT
97 select SND_BF5XX_SOC_AC97
99 Say Y or M if you want to add support for codecs attached to
100 the Blackfin SPORT (synchronous serial ports) interface in slot 16
101 mode (pseudo AC97 interface).
102 You will also need to select the audio interfaces to support below.
105 AC97 codecs which do not implement the slot-16 mode will not function
106 properly with this driver. This driver is known to work with the
107 Analog Devices line of AC97 codecs.
109 config SND_BF5XX_MMAP_SUPPORT
110 bool "Enable MMAP Support"
111 depends on SND_BF5XX_AC97
114 Say y if you want AC97 driver to support mmap mode.
115 We introduce an intermediate buffer to simulate mmap.
117 config SND_BF5XX_MULTICHAN_SUPPORT
118 bool "Enable Multichannel Support"
119 depends on SND_BF5XX_AC97
122 Say y if you want AC97 driver to support up to 5.1 channel audio.
123 this mode will consume much more memory for DMA.
125 config SND_BF5XX_HAVE_COLD_RESET
126 bool "BOARD has COLD Reset GPIO"
127 depends on SND_BF5XX_AC97
128 default y if BFIN548_EZKIT
129 default n if !BFIN548_EZKIT
131 config SND_BF5XX_RESET_GPIO_NUM
132 int "Set a GPIO for cold reset"
133 depends on SND_BF5XX_HAVE_COLD_RESET
135 default 19 if BFIN548_EZKIT
136 default 5 if BFIN537_STAMP
139 Set the correct GPIO for RESET the sound chip.
141 config SND_BF5XX_SOC_AD1980
142 tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
143 depends on SND_BF5XX_AC97
144 select SND_BF5XX_SOC_AC97
145 select SND_SOC_AD1980
147 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
150 Because Analog Devices Inc. discontinued the ad1980 sound chip since
151 Sep. 2009, this ad1980 driver is not maintained, tested and supported
154 config SND_BF5XX_SOC_SPORT
157 config SND_BF6XX_SOC_SPORT
160 config SND_BF5XX_SOC_I2S
163 config SND_BF6XX_SOC_I2S
166 config SND_BF5XX_SOC_AC97
169 config SND_BF5XX_SPORT_NUM
170 int "Set a SPORT for Sound chip"
171 depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)
176 Set the correct SPORT for sound chip.