1 //===- SLPVectorizer.cpp - A bottom up SLP Vectorizer ---------------------===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
9 // This pass implements the Bottom Up SLP vectorizer. It detects consecutive
10 // stores that can be put together into vector-stores. Next, it attempts to
11 // construct vectorizable tree using the use-def chains. If a profitable tree
12 // was found, the SLP vectorizer performs vectorization on the tree.
14 // The pass is inspired by the work described in the paper:
15 // "Loop-Aware SLP in GCC" by Ira Rosen, Dorit Nuzman, Ayal Zaks.
17 //===----------------------------------------------------------------------===//
18 #define SV_NAME "slp-vectorizer"
19 #define DEBUG_TYPE "SLP"
21 #include "llvm/Transforms/Vectorize.h"
22 #include "llvm/ADT/MapVector.h"
23 #include "llvm/ADT/PostOrderIterator.h"
24 #include "llvm/ADT/SetVector.h"
25 #include "llvm/Analysis/AliasAnalysis.h"
26 #include "llvm/Analysis/ScalarEvolution.h"
27 #include "llvm/Analysis/ScalarEvolutionExpressions.h"
28 #include "llvm/Analysis/AliasAnalysis.h"
29 #include "llvm/Analysis/TargetTransformInfo.h"
30 #include "llvm/Analysis/Verifier.h"
31 #include "llvm/Analysis/LoopInfo.h"
32 #include "llvm/IR/DataLayout.h"
33 #include "llvm/IR/Instructions.h"
34 #include "llvm/IR/IntrinsicInst.h"
35 #include "llvm/IR/IRBuilder.h"
36 #include "llvm/IR/Module.h"
37 #include "llvm/IR/Type.h"
38 #include "llvm/IR/Value.h"
39 #include "llvm/Pass.h"
40 #include "llvm/Support/CommandLine.h"
41 #include "llvm/Support/Debug.h"
42 #include "llvm/Support/raw_ostream.h"
49 SLPCostThreshold("slp-threshold", cl::init(0), cl::Hidden,
50 cl::desc("Only vectorize if you gain more than this "
54 static const unsigned MinVecRegSize = 128;
56 static const unsigned RecursionMaxDepth = 12;
58 /// RAII pattern to save the insertion point of the IR builder.
59 class BuilderLocGuard {
61 BuilderLocGuard(IRBuilder<> &B) : Builder(B), Loc(B.GetInsertPoint()) {}
62 ~BuilderLocGuard() { if (Loc) Builder.SetInsertPoint(Loc); }
66 BuilderLocGuard(const BuilderLocGuard &);
67 BuilderLocGuard &operator=(const BuilderLocGuard &);
69 AssertingVH<Instruction> Loc;
72 /// A helper class for numbering instructions in multible blocks.
73 /// Numbers starts at zero for each basic block.
74 struct BlockNumbering {
76 BlockNumbering(BasicBlock *Bb) : BB(Bb), Valid(false) {}
78 BlockNumbering() : BB(0), Valid(false) {}
80 void numberInstructions() {
84 // Number the instructions in the block.
85 for (BasicBlock::iterator it = BB->begin(), e = BB->end(); it != e; ++it) {
87 InstrVec.push_back(it);
88 assert(InstrVec[InstrIdx[it]] == it && "Invalid allocation");
93 int getIndex(Instruction *I) {
94 assert(I->getParent() == BB && "Invalid instruction");
97 assert(InstrIdx.count(I) && "Unknown instruction");
101 Instruction *getInstruction(unsigned loc) {
103 numberInstructions();
104 assert(InstrVec.size() > loc && "Invalid Index");
105 return InstrVec[loc];
108 void forget() { Valid = false; }
111 /// The block we are numbering.
113 /// Is the block numbered.
115 /// Maps instructions to numbers and back.
116 SmallDenseMap<Instruction *, int> InstrIdx;
117 /// Maps integers to Instructions.
118 std::vector<Instruction *> InstrVec;
121 /// \returns the parent basic block if all of the instructions in \p VL
122 /// are in the same block or null otherwise.
123 static BasicBlock *getSameBlock(ArrayRef<Value *> VL) {
124 Instruction *I0 = dyn_cast<Instruction>(VL[0]);
127 BasicBlock *BB = I0->getParent();
128 for (int i = 1, e = VL.size(); i < e; i++) {
129 Instruction *I = dyn_cast<Instruction>(VL[i]);
133 if (BB != I->getParent())
139 /// \returns True if all of the values in \p VL are constants.
140 static bool allConstant(ArrayRef<Value *> VL) {
141 for (unsigned i = 0, e = VL.size(); i < e; ++i)
142 if (!isa<Constant>(VL[i]))
147 /// \returns True if all of the values in \p VL are identical.
148 static bool isSplat(ArrayRef<Value *> VL) {
149 for (unsigned i = 1, e = VL.size(); i < e; ++i)
155 /// \returns The opcode if all of the Instructions in \p VL have the same
157 static unsigned getSameOpcode(ArrayRef<Value *> VL) {
158 Instruction *I0 = dyn_cast<Instruction>(VL[0]);
161 unsigned Opcode = I0->getOpcode();
162 for (int i = 1, e = VL.size(); i < e; i++) {
163 Instruction *I = dyn_cast<Instruction>(VL[i]);
164 if (!I || Opcode != I->getOpcode())
170 /// \returns The type that all of the values in \p VL have or null if there
171 /// are different types.
172 static Type* getSameType(ArrayRef<Value *> VL) {
173 Type *Ty = VL[0]->getType();
174 for (int i = 1, e = VL.size(); i < e; i++)
175 if (VL[i]->getType() != Ty)
181 /// \returns True if the ExtractElement instructions in VL can be vectorized
182 /// to use the original vector.
183 static bool CanReuseExtract(ArrayRef<Value *> VL) {
184 assert(Instruction::ExtractElement == getSameOpcode(VL) && "Invalid opcode");
185 // Check if all of the extracts come from the same vector and from the
188 ExtractElementInst *E0 = cast<ExtractElementInst>(VL0);
189 Value *Vec = E0->getOperand(0);
191 // We have to extract from the same vector type.
192 unsigned NElts = Vec->getType()->getVectorNumElements();
194 if (NElts != VL.size())
197 // Check that all of the indices extract from the correct offset.
198 ConstantInt *CI = dyn_cast<ConstantInt>(E0->getOperand(1));
199 if (!CI || CI->getZExtValue())
202 for (unsigned i = 1, e = VL.size(); i < e; ++i) {
203 ExtractElementInst *E = cast<ExtractElementInst>(VL[i]);
204 ConstantInt *CI = dyn_cast<ConstantInt>(E->getOperand(1));
206 if (!CI || CI->getZExtValue() != i || E->getOperand(0) != Vec)
213 /// Bottom Up SLP Vectorizer.
216 typedef SmallVector<Value *, 8> ValueList;
217 typedef SmallVector<Instruction *, 16> InstrList;
218 typedef SmallPtrSet<Value *, 16> ValueSet;
219 typedef SmallVector<StoreInst *, 8> StoreList;
221 BoUpSLP(Function *Func, ScalarEvolution *Se, DataLayout *Dl,
222 TargetTransformInfo *Tti, AliasAnalysis *Aa, LoopInfo *Li,
224 F(Func), SE(Se), DL(Dl), TTI(Tti), AA(Aa), LI(Li), DT(Dt),
225 Builder(Se->getContext()) {
226 // Setup the block numbering utility for all of the blocks in the
228 for (Function::iterator it = F->begin(), e = F->end(); it != e; ++it) {
230 BlocksNumbers[BB] = BlockNumbering(BB);
234 /// \brief Vectorize the tree that starts with the elements in \p VL.
235 void vectorizeTree();
237 /// \returns the vectorization cost of the subtree that starts at \p VL.
238 /// A negative number means that this is profitable.
241 /// Construct a vectorizable tree that starts at \p Roots.
242 void buildTree(ArrayRef<Value *> Roots);
244 /// Clear the internal data structures that are created by 'buildTree'.
246 VectorizableTree.clear();
247 ScalarToTreeEntry.clear();
249 ExternalUses.clear();
250 MemBarrierIgnoreList.clear();
253 /// \returns true if the memory operations A and B are consecutive.
254 bool isConsecutiveAccess(Value *A, Value *B);
256 /// \brief Perform LICM and CSE on the newly generated gather sequences.
257 void optimizeGatherSequence();
261 /// \returns the cost of the vectorizable entry.
262 int getEntryCost(TreeEntry *E);
264 /// This is the recursive part of buildTree.
265 void buildTree_rec(ArrayRef<Value *> Roots, unsigned Depth);
267 /// Vectorizer a single entry in the tree.
268 Value *vectorizeTree(TreeEntry *E);
270 /// Vectorizer a single entry in the tree, starting in \p VL.
271 Value *vectorizeTree(ArrayRef<Value *> VL);
273 /// \brief Take the pointer operand from the Load/Store instruction.
274 /// \returns NULL if this is not a valid Load/Store instruction.
275 static Value *getPointerOperand(Value *I);
277 /// \brief Take the address space operand from the Load/Store instruction.
278 /// \returns -1 if this is not a valid Load/Store instruction.
279 static unsigned getAddressSpaceOperand(Value *I);
281 /// \returns the scalarization cost for this type. Scalarization in this
282 /// context means the creation of vectors from a group of scalars.
283 int getGatherCost(Type *Ty);
285 /// \returns the scalarization cost for this list of values. Assuming that
286 /// this subtree gets vectorized, we may need to extract the values from the
287 /// roots. This method calculates the cost of extracting the values.
288 int getGatherCost(ArrayRef<Value *> VL);
290 /// \returns the AA location that is being access by the instruction.
291 AliasAnalysis::Location getLocation(Instruction *I);
293 /// \brief Checks if it is possible to sink an instruction from
294 /// \p Src to \p Dst.
295 /// \returns the pointer to the barrier instruction if we can't sink.
296 Value *getSinkBarrier(Instruction *Src, Instruction *Dst);
298 /// \returns the index of the last instrucion in the BB from \p VL.
299 int getLastIndex(ArrayRef<Value *> VL);
301 /// \returns the Instrucion in the bundle \p VL.
302 Instruction *getLastInstruction(ArrayRef<Value *> VL);
304 /// \returns the Instruction at index \p Index which is in Block \p BB.
305 Instruction *getInstructionForIndex(unsigned Index, BasicBlock *BB);
307 /// \returns the index of the first User of \p VL.
308 int getFirstUserIndex(ArrayRef<Value *> VL);
310 /// \returns a vector from a collection of scalars in \p VL.
311 Value *Gather(ArrayRef<Value *> VL, VectorType *Ty);
314 TreeEntry() : Scalars(), VectorizedValue(0), LastScalarIndex(0),
317 /// \returns true if the scalars in VL are equal to this entry.
318 bool isSame(ArrayRef<Value *> VL) {
319 assert(VL.size() == Scalars.size() && "Invalid size");
320 for (int i = 0, e = VL.size(); i != e; ++i)
321 if (VL[i] != Scalars[i])
326 /// A vector of scalars.
329 /// The Scalars are vectorized into this value. It is initialized to Null.
330 Value *VectorizedValue;
332 /// The index in the basic block of the last scalar.
335 /// Do we need to gather this sequence ?
339 /// Create a new VectorizableTree entry.
340 TreeEntry *newTreeEntry(ArrayRef<Value *> VL, bool Vectorized) {
341 VectorizableTree.push_back(TreeEntry());
342 int idx = VectorizableTree.size() - 1;
343 TreeEntry *Last = &VectorizableTree[idx];
344 Last->Scalars.insert(Last->Scalars.begin(), VL.begin(), VL.end());
345 Last->NeedToGather = !Vectorized;
347 Last->LastScalarIndex = getLastIndex(VL);
348 for (int i = 0, e = VL.size(); i != e; ++i) {
349 assert(!ScalarToTreeEntry.count(VL[i]) && "Scalar already in tree!");
350 ScalarToTreeEntry[VL[i]] = idx;
353 Last->LastScalarIndex = 0;
354 MustGather.insert(VL.begin(), VL.end());
359 /// -- Vectorization State --
360 /// Holds all of the tree entries.
361 std::vector<TreeEntry> VectorizableTree;
363 /// Maps a specific scalar to its tree entry.
364 SmallDenseMap<Value*, int> ScalarToTreeEntry;
366 /// A list of scalars that we found that we need to keep as scalars.
369 /// This POD struct describes one external user in the vectorized tree.
370 struct ExternalUser {
371 ExternalUser (Value *S, llvm::User *U, int L) :
372 Scalar(S), User(U), Lane(L){};
373 // Which scalar in our function.
375 // Which user that uses the scalar.
377 // Which lane does the scalar belong to.
380 typedef SmallVector<ExternalUser, 16> UserList;
382 /// A list of values that need to extracted out of the tree.
383 /// This list holds pairs of (Internal Scalar : External User).
384 UserList ExternalUses;
386 /// A list of instructions to ignore while sinking
387 /// memory instructions. This map must be reset between runs of getCost.
388 ValueSet MemBarrierIgnoreList;
390 /// Holds all of the instructions that we gathered.
391 SetVector<Instruction *> GatherSeq;
393 /// Numbers instructions in different blocks.
394 std::map<BasicBlock *, BlockNumbering> BlocksNumbers;
396 // Analysis and block reference.
400 TargetTransformInfo *TTI;
404 /// Instruction builder to construct the vectorized tree.
408 void BoUpSLP::buildTree(ArrayRef<Value *> Roots) {
410 if (!getSameType(Roots))
412 buildTree_rec(Roots, 0);
414 // Collect the values that we need to extract from the tree.
415 for (int EIdx = 0, EE = VectorizableTree.size(); EIdx < EE; ++EIdx) {
416 TreeEntry *Entry = &VectorizableTree[EIdx];
419 for (int Lane = 0, LE = Entry->Scalars.size(); Lane != LE; ++Lane) {
420 Value *Scalar = Entry->Scalars[Lane];
422 // No need to handle users of gathered values.
423 if (Entry->NeedToGather)
426 for (Value::use_iterator User = Scalar->use_begin(),
427 UE = Scalar->use_end(); User != UE; ++User) {
428 DEBUG(dbgs() << "SLP: Checking user:" << **User << ".\n");
430 bool Gathered = MustGather.count(*User);
432 // Skip in-tree scalars that become vectors.
433 if (ScalarToTreeEntry.count(*User) && !Gathered) {
434 DEBUG(dbgs() << "SLP: \tInternal user will be removed:" <<
436 int Idx = ScalarToTreeEntry[*User]; (void) Idx;
437 assert(!VectorizableTree[Idx].NeedToGather && "Bad state");
441 if (!isa<Instruction>(*User))
444 DEBUG(dbgs() << "SLP: Need to extract:" << **User << " from lane " <<
445 Lane << " from " << *Scalar << ".\n");
446 ExternalUses.push_back(ExternalUser(Scalar, *User, Lane));
453 void BoUpSLP::buildTree_rec(ArrayRef<Value *> VL, unsigned Depth) {
454 bool SameTy = getSameType(VL); (void)SameTy;
455 assert(SameTy && "Invalid types!");
457 if (Depth == RecursionMaxDepth) {
458 DEBUG(dbgs() << "SLP: Gathering due to max recursion depth.\n");
459 newTreeEntry(VL, false);
463 // Don't handle vectors.
464 if (VL[0]->getType()->isVectorTy()) {
465 DEBUG(dbgs() << "SLP: Gathering due to vector type.\n");
466 newTreeEntry(VL, false);
470 if (StoreInst *SI = dyn_cast<StoreInst>(VL[0]))
471 if (SI->getValueOperand()->getType()->isVectorTy()) {
472 DEBUG(dbgs() << "SLP: Gathering due to store vector type.\n");
473 newTreeEntry(VL, false);
477 // If all of the operands are identical or constant we have a simple solution.
478 if (allConstant(VL) || isSplat(VL) || !getSameBlock(VL) ||
479 !getSameOpcode(VL)) {
480 DEBUG(dbgs() << "SLP: Gathering due to C,S,B,O. \n");
481 newTreeEntry(VL, false);
485 // We now know that this is a vector of instructions of the same type from
488 // Check if this is a duplicate of another entry.
489 if (ScalarToTreeEntry.count(VL[0])) {
490 int Idx = ScalarToTreeEntry[VL[0]];
491 TreeEntry *E = &VectorizableTree[Idx];
492 for (unsigned i = 0, e = VL.size(); i != e; ++i) {
493 DEBUG(dbgs() << "SLP: \tChecking bundle: " << *VL[i] << ".\n");
494 if (E->Scalars[i] != VL[i]) {
495 DEBUG(dbgs() << "SLP: Gathering due to partial overlap.\n");
496 newTreeEntry(VL, false);
500 DEBUG(dbgs() << "SLP: Perfect diamond merge at " << *VL[0] << ".\n");
504 // Check that none of the instructions in the bundle are already in the tree.
505 for (unsigned i = 0, e = VL.size(); i != e; ++i) {
506 if (ScalarToTreeEntry.count(VL[i])) {
507 DEBUG(dbgs() << "SLP: The instruction (" << *VL[i] <<
508 ") is already in tree.\n");
509 newTreeEntry(VL, false);
514 // If any of the scalars appears in the table OR it is marked as a value that
515 // needs to stat scalar then we need to gather the scalars.
516 for (unsigned i = 0, e = VL.size(); i != e; ++i) {
517 if (ScalarToTreeEntry.count(VL[i]) || MustGather.count(VL[i])) {
518 DEBUG(dbgs() << "SLP: Gathering due to gathered scalar. \n");
519 newTreeEntry(VL, false);
524 // Check that all of the users of the scalars that we want to vectorize are
526 Instruction *VL0 = cast<Instruction>(VL[0]);
527 int MyLastIndex = getLastIndex(VL);
528 BasicBlock *BB = cast<Instruction>(VL0)->getParent();
530 for (unsigned i = 0, e = VL.size(); i != e; ++i) {
531 Instruction *Scalar = cast<Instruction>(VL[i]);
532 DEBUG(dbgs() << "SLP: Checking users of " << *Scalar << ". \n");
533 for (Value::use_iterator U = Scalar->use_begin(), UE = Scalar->use_end();
535 DEBUG(dbgs() << "SLP: \tUser " << **U << ". \n");
536 Instruction *User = dyn_cast<Instruction>(*U);
538 DEBUG(dbgs() << "SLP: Gathering due unknown user. \n");
539 newTreeEntry(VL, false);
543 // We don't care if the user is in a different basic block.
544 BasicBlock *UserBlock = User->getParent();
545 if (UserBlock != BB) {
546 DEBUG(dbgs() << "SLP: User from a different basic block "
551 // If this is a PHINode within this basic block then we can place the
552 // extract wherever we want.
553 if (isa<PHINode>(*User)) {
554 DEBUG(dbgs() << "SLP: \tWe can schedule PHIs:" << *User << ". \n");
558 // Check if this is a safe in-tree user.
559 if (ScalarToTreeEntry.count(User)) {
560 int Idx = ScalarToTreeEntry[User];
561 int VecLocation = VectorizableTree[Idx].LastScalarIndex;
562 if (VecLocation <= MyLastIndex) {
563 DEBUG(dbgs() << "SLP: Gathering due to unschedulable vector. \n");
564 newTreeEntry(VL, false);
567 DEBUG(dbgs() << "SLP: In-tree user (" << *User << ") at #" <<
568 VecLocation << " vector value (" << *Scalar << ") at #"
569 << MyLastIndex << ".\n");
573 // Make sure that we can schedule this unknown user.
574 BlockNumbering &BN = BlocksNumbers[BB];
575 int UserIndex = BN.getIndex(User);
576 if (UserIndex < MyLastIndex) {
578 DEBUG(dbgs() << "SLP: Can't schedule extractelement for "
580 newTreeEntry(VL, false);
586 // Check that every instructions appears once in this bundle.
587 for (unsigned i = 0, e = VL.size(); i < e; ++i)
588 for (unsigned j = i+1; j < e; ++j)
589 if (VL[i] == VL[j]) {
590 DEBUG(dbgs() << "SLP: Scalar used twice in bundle.\n");
591 newTreeEntry(VL, false);
595 // Check that instructions in this bundle don't reference other instructions.
596 // The runtime of this check is O(N * N-1 * uses(N)) and a typical N is 4.
597 for (unsigned i = 0, e = VL.size(); i < e; ++i) {
598 for (Value::use_iterator U = VL[i]->use_begin(), UE = VL[i]->use_end();
600 for (unsigned j = 0; j < e; ++j) {
601 if (i != j && *U == VL[j]) {
602 DEBUG(dbgs() << "SLP: Intra-bundle dependencies!" << **U << ". \n");
603 newTreeEntry(VL, false);
610 DEBUG(dbgs() << "SLP: We are able to schedule this bundle.\n");
612 unsigned Opcode = getSameOpcode(VL);
614 // Check if it is safe to sink the loads or the stores.
615 if (Opcode == Instruction::Load || Opcode == Instruction::Store) {
616 Instruction *Last = getLastInstruction(VL);
618 for (unsigned i = 0, e = VL.size(); i < e; ++i) {
621 Value *Barrier = getSinkBarrier(cast<Instruction>(VL[i]), Last);
623 DEBUG(dbgs() << "SLP: Can't sink " << *VL[i] << "\n down to " << *Last
624 << "\n because of " << *Barrier << ". Gathering.\n");
625 newTreeEntry(VL, false);
632 case Instruction::PHI: {
633 PHINode *PH = dyn_cast<PHINode>(VL0);
634 newTreeEntry(VL, true);
635 DEBUG(dbgs() << "SLP: added a vector of PHINodes.\n");
637 for (unsigned i = 0, e = PH->getNumIncomingValues(); i < e; ++i) {
639 // Prepare the operand vector.
640 for (unsigned j = 0; j < VL.size(); ++j)
641 Operands.push_back(cast<PHINode>(VL[j])->getIncomingValue(i));
643 buildTree_rec(Operands, Depth + 1);
647 case Instruction::ExtractElement: {
648 bool Reuse = CanReuseExtract(VL);
650 DEBUG(dbgs() << "SLP: Reusing extract sequence.\n");
652 newTreeEntry(VL, Reuse);
655 case Instruction::Load: {
656 // Check if the loads are consecutive or of we need to swizzle them.
657 for (unsigned i = 0, e = VL.size() - 1; i < e; ++i)
658 if (!isConsecutiveAccess(VL[i], VL[i + 1])) {
659 newTreeEntry(VL, false);
660 DEBUG(dbgs() << "SLP: Need to swizzle loads.\n");
664 newTreeEntry(VL, true);
665 DEBUG(dbgs() << "SLP: added a vector of loads.\n");
668 case Instruction::ZExt:
669 case Instruction::SExt:
670 case Instruction::FPToUI:
671 case Instruction::FPToSI:
672 case Instruction::FPExt:
673 case Instruction::PtrToInt:
674 case Instruction::IntToPtr:
675 case Instruction::SIToFP:
676 case Instruction::UIToFP:
677 case Instruction::Trunc:
678 case Instruction::FPTrunc:
679 case Instruction::BitCast: {
680 Type *SrcTy = VL0->getOperand(0)->getType();
681 for (unsigned i = 0; i < VL.size(); ++i) {
682 Type *Ty = cast<Instruction>(VL[i])->getOperand(0)->getType();
683 if (Ty != SrcTy || Ty->isAggregateType() || Ty->isVectorTy()) {
684 newTreeEntry(VL, false);
685 DEBUG(dbgs() << "SLP: Gathering casts with different src types.\n");
689 newTreeEntry(VL, true);
690 DEBUG(dbgs() << "SLP: added a vector of casts.\n");
692 for (unsigned i = 0, e = VL0->getNumOperands(); i < e; ++i) {
694 // Prepare the operand vector.
695 for (unsigned j = 0; j < VL.size(); ++j)
696 Operands.push_back(cast<Instruction>(VL[j])->getOperand(i));
698 buildTree_rec(Operands, Depth+1);
702 case Instruction::ICmp:
703 case Instruction::FCmp: {
704 // Check that all of the compares have the same predicate.
705 CmpInst::Predicate P0 = dyn_cast<CmpInst>(VL0)->getPredicate();
706 for (unsigned i = 1, e = VL.size(); i < e; ++i) {
707 CmpInst *Cmp = cast<CmpInst>(VL[i]);
708 if (Cmp->getPredicate() != P0) {
709 newTreeEntry(VL, false);
710 DEBUG(dbgs() << "SLP: Gathering cmp with different predicate.\n");
715 newTreeEntry(VL, true);
716 DEBUG(dbgs() << "SLP: added a vector of compares.\n");
718 for (unsigned i = 0, e = VL0->getNumOperands(); i < e; ++i) {
720 // Prepare the operand vector.
721 for (unsigned j = 0; j < VL.size(); ++j)
722 Operands.push_back(cast<Instruction>(VL[j])->getOperand(i));
724 buildTree_rec(Operands, Depth+1);
728 case Instruction::Select:
729 case Instruction::Add:
730 case Instruction::FAdd:
731 case Instruction::Sub:
732 case Instruction::FSub:
733 case Instruction::Mul:
734 case Instruction::FMul:
735 case Instruction::UDiv:
736 case Instruction::SDiv:
737 case Instruction::FDiv:
738 case Instruction::URem:
739 case Instruction::SRem:
740 case Instruction::FRem:
741 case Instruction::Shl:
742 case Instruction::LShr:
743 case Instruction::AShr:
744 case Instruction::And:
745 case Instruction::Or:
746 case Instruction::Xor: {
747 newTreeEntry(VL, true);
748 DEBUG(dbgs() << "SLP: added a vector of bin op.\n");
750 for (unsigned i = 0, e = VL0->getNumOperands(); i < e; ++i) {
752 // Prepare the operand vector.
753 for (unsigned j = 0; j < VL.size(); ++j)
754 Operands.push_back(cast<Instruction>(VL[j])->getOperand(i));
756 buildTree_rec(Operands, Depth+1);
760 case Instruction::Store: {
761 // Check if the stores are consecutive or of we need to swizzle them.
762 for (unsigned i = 0, e = VL.size() - 1; i < e; ++i)
763 if (!isConsecutiveAccess(VL[i], VL[i + 1])) {
764 newTreeEntry(VL, false);
765 DEBUG(dbgs() << "SLP: Non consecutive store.\n");
769 newTreeEntry(VL, true);
770 DEBUG(dbgs() << "SLP: added a vector of stores.\n");
773 for (unsigned j = 0; j < VL.size(); ++j)
774 Operands.push_back(cast<Instruction>(VL[j])->getOperand(0));
776 // We can ignore these values because we are sinking them down.
777 MemBarrierIgnoreList.insert(VL.begin(), VL.end());
778 buildTree_rec(Operands, Depth + 1);
782 newTreeEntry(VL, false);
783 DEBUG(dbgs() << "SLP: Gathering unknown instruction.\n");
788 int BoUpSLP::getEntryCost(TreeEntry *E) {
789 ArrayRef<Value*> VL = E->Scalars;
791 Type *ScalarTy = VL[0]->getType();
792 if (StoreInst *SI = dyn_cast<StoreInst>(VL[0]))
793 ScalarTy = SI->getValueOperand()->getType();
794 VectorType *VecTy = VectorType::get(ScalarTy, VL.size());
796 if (E->NeedToGather) {
800 return TTI->getShuffleCost(TargetTransformInfo::SK_Broadcast, VecTy, 0);
802 return getGatherCost(E->Scalars);
805 assert(getSameOpcode(VL) && getSameType(VL) && getSameBlock(VL) &&
807 Instruction *VL0 = cast<Instruction>(VL[0]);
808 unsigned Opcode = VL0->getOpcode();
810 case Instruction::PHI: {
813 case Instruction::ExtractElement: {
814 if (CanReuseExtract(VL))
816 return getGatherCost(VecTy);
818 case Instruction::ZExt:
819 case Instruction::SExt:
820 case Instruction::FPToUI:
821 case Instruction::FPToSI:
822 case Instruction::FPExt:
823 case Instruction::PtrToInt:
824 case Instruction::IntToPtr:
825 case Instruction::SIToFP:
826 case Instruction::UIToFP:
827 case Instruction::Trunc:
828 case Instruction::FPTrunc:
829 case Instruction::BitCast: {
830 Type *SrcTy = VL0->getOperand(0)->getType();
832 // Calculate the cost of this instruction.
833 int ScalarCost = VL.size() * TTI->getCastInstrCost(VL0->getOpcode(),
834 VL0->getType(), SrcTy);
836 VectorType *SrcVecTy = VectorType::get(SrcTy, VL.size());
837 int VecCost = TTI->getCastInstrCost(VL0->getOpcode(), VecTy, SrcVecTy);
838 return VecCost - ScalarCost;
840 case Instruction::FCmp:
841 case Instruction::ICmp:
842 case Instruction::Select:
843 case Instruction::Add:
844 case Instruction::FAdd:
845 case Instruction::Sub:
846 case Instruction::FSub:
847 case Instruction::Mul:
848 case Instruction::FMul:
849 case Instruction::UDiv:
850 case Instruction::SDiv:
851 case Instruction::FDiv:
852 case Instruction::URem:
853 case Instruction::SRem:
854 case Instruction::FRem:
855 case Instruction::Shl:
856 case Instruction::LShr:
857 case Instruction::AShr:
858 case Instruction::And:
859 case Instruction::Or:
860 case Instruction::Xor: {
861 // Calculate the cost of this instruction.
864 if (Opcode == Instruction::FCmp || Opcode == Instruction::ICmp ||
865 Opcode == Instruction::Select) {
866 VectorType *MaskTy = VectorType::get(Builder.getInt1Ty(), VL.size());
867 ScalarCost = VecTy->getNumElements() *
868 TTI->getCmpSelInstrCost(Opcode, ScalarTy, Builder.getInt1Ty());
869 VecCost = TTI->getCmpSelInstrCost(Opcode, VecTy, MaskTy);
871 ScalarCost = VecTy->getNumElements() *
872 TTI->getArithmeticInstrCost(Opcode, ScalarTy);
873 VecCost = TTI->getArithmeticInstrCost(Opcode, VecTy);
875 return VecCost - ScalarCost;
877 case Instruction::Load: {
878 // Cost of wide load - cost of scalar loads.
879 int ScalarLdCost = VecTy->getNumElements() *
880 TTI->getMemoryOpCost(Instruction::Load, ScalarTy, 1, 0);
881 int VecLdCost = TTI->getMemoryOpCost(Instruction::Load, ScalarTy, 1, 0);
882 return VecLdCost - ScalarLdCost;
884 case Instruction::Store: {
885 // We know that we can merge the stores. Calculate the cost.
886 int ScalarStCost = VecTy->getNumElements() *
887 TTI->getMemoryOpCost(Instruction::Store, ScalarTy, 1, 0);
888 int VecStCost = TTI->getMemoryOpCost(Instruction::Store, ScalarTy, 1, 0);
889 return VecStCost - ScalarStCost;
892 llvm_unreachable("Unknown instruction");
896 int BoUpSLP::getTreeCost() {
898 DEBUG(dbgs() << "SLP: Calculating cost for tree of size " <<
899 VectorizableTree.size() << ".\n");
901 if (!VectorizableTree.size()) {
902 assert(!ExternalUses.size() && "We should not have any external users");
906 unsigned BundleWidth = VectorizableTree[0].Scalars.size();
908 for (unsigned i = 0, e = VectorizableTree.size(); i != e; ++i) {
909 int C = getEntryCost(&VectorizableTree[i]);
910 DEBUG(dbgs() << "SLP: Adding cost " << C << " for bundle that starts with "
911 << *VectorizableTree[i].Scalars[0] << " .\n");
916 for (UserList::iterator I = ExternalUses.begin(), E = ExternalUses.end();
919 VectorType *VecTy = VectorType::get(I->Scalar->getType(), BundleWidth);
920 ExtractCost += TTI->getVectorInstrCost(Instruction::ExtractElement, VecTy,
925 DEBUG(dbgs() << "SLP: Total Cost " << Cost + ExtractCost<< ".\n");
926 return Cost + ExtractCost;
929 int BoUpSLP::getGatherCost(Type *Ty) {
931 for (unsigned i = 0, e = cast<VectorType>(Ty)->getNumElements(); i < e; ++i)
932 Cost += TTI->getVectorInstrCost(Instruction::InsertElement, Ty, i);
936 int BoUpSLP::getGatherCost(ArrayRef<Value *> VL) {
937 // Find the type of the operands in VL.
938 Type *ScalarTy = VL[0]->getType();
939 if (StoreInst *SI = dyn_cast<StoreInst>(VL[0]))
940 ScalarTy = SI->getValueOperand()->getType();
941 VectorType *VecTy = VectorType::get(ScalarTy, VL.size());
942 // Find the cost of inserting/extracting values from the vector.
943 return getGatherCost(VecTy);
946 AliasAnalysis::Location BoUpSLP::getLocation(Instruction *I) {
947 if (StoreInst *SI = dyn_cast<StoreInst>(I))
948 return AA->getLocation(SI);
949 if (LoadInst *LI = dyn_cast<LoadInst>(I))
950 return AA->getLocation(LI);
951 return AliasAnalysis::Location();
954 Value *BoUpSLP::getPointerOperand(Value *I) {
955 if (LoadInst *LI = dyn_cast<LoadInst>(I))
956 return LI->getPointerOperand();
957 if (StoreInst *SI = dyn_cast<StoreInst>(I))
958 return SI->getPointerOperand();
962 unsigned BoUpSLP::getAddressSpaceOperand(Value *I) {
963 if (LoadInst *L = dyn_cast<LoadInst>(I))
964 return L->getPointerAddressSpace();
965 if (StoreInst *S = dyn_cast<StoreInst>(I))
966 return S->getPointerAddressSpace();
970 bool BoUpSLP::isConsecutiveAccess(Value *A, Value *B) {
971 Value *PtrA = getPointerOperand(A);
972 Value *PtrB = getPointerOperand(B);
973 unsigned ASA = getAddressSpaceOperand(A);
974 unsigned ASB = getAddressSpaceOperand(B);
976 // Check that the address spaces match and that the pointers are valid.
977 if (!PtrA || !PtrB || (ASA != ASB))
980 // Check that A and B are of the same type.
981 if (PtrA->getType() != PtrB->getType())
984 // Calculate the distance.
985 const SCEV *PtrSCEVA = SE->getSCEV(PtrA);
986 const SCEV *PtrSCEVB = SE->getSCEV(PtrB);
987 const SCEV *OffsetSCEV = SE->getMinusSCEV(PtrSCEVA, PtrSCEVB);
988 const SCEVConstant *ConstOffSCEV = dyn_cast<SCEVConstant>(OffsetSCEV);
990 // Non constant distance.
994 int64_t Offset = ConstOffSCEV->getValue()->getSExtValue();
995 Type *Ty = cast<PointerType>(PtrA->getType())->getElementType();
996 // The Instructions are connsecutive if the size of the first load/store is
997 // the same as the offset.
998 int64_t Sz = DL->getTypeStoreSize(Ty);
999 return ((-Offset) == Sz);
1002 Value *BoUpSLP::getSinkBarrier(Instruction *Src, Instruction *Dst) {
1003 assert(Src->getParent() == Dst->getParent() && "Not the same BB");
1004 BasicBlock::iterator I = Src, E = Dst;
1005 /// Scan all of the instruction from SRC to DST and check if
1006 /// the source may alias.
1007 for (++I; I != E; ++I) {
1008 // Ignore store instructions that are marked as 'ignore'.
1009 if (MemBarrierIgnoreList.count(I))
1011 if (Src->mayWriteToMemory()) /* Write */ {
1012 if (!I->mayReadOrWriteMemory())
1015 if (!I->mayWriteToMemory())
1018 AliasAnalysis::Location A = getLocation(&*I);
1019 AliasAnalysis::Location B = getLocation(Src);
1021 if (!A.Ptr || !B.Ptr || AA->alias(A, B))
1027 int BoUpSLP::getLastIndex(ArrayRef<Value *> VL) {
1028 BasicBlock *BB = cast<Instruction>(VL[0])->getParent();
1029 assert(BB == getSameBlock(VL) && BlocksNumbers.count(BB) && "Invalid block");
1030 BlockNumbering &BN = BlocksNumbers[BB];
1032 int MaxIdx = BN.getIndex(BB->getFirstNonPHI());
1033 for (unsigned i = 0, e = VL.size(); i < e; ++i)
1034 MaxIdx = std::max(MaxIdx, BN.getIndex(cast<Instruction>(VL[i])));
1038 Instruction *BoUpSLP::getLastInstruction(ArrayRef<Value *> VL) {
1039 BasicBlock *BB = cast<Instruction>(VL[0])->getParent();
1040 assert(BB == getSameBlock(VL) && BlocksNumbers.count(BB) && "Invalid block");
1041 BlockNumbering &BN = BlocksNumbers[BB];
1043 int MaxIdx = BN.getIndex(cast<Instruction>(VL[0]));
1044 for (unsigned i = 1, e = VL.size(); i < e; ++i)
1045 MaxIdx = std::max(MaxIdx, BN.getIndex(cast<Instruction>(VL[i])));
1046 Instruction *I = BN.getInstruction(MaxIdx);
1047 assert(I && "bad location");
1051 Instruction *BoUpSLP::getInstructionForIndex(unsigned Index, BasicBlock *BB) {
1052 BlockNumbering &BN = BlocksNumbers[BB];
1053 return BN.getInstruction(Index);
1056 int BoUpSLP::getFirstUserIndex(ArrayRef<Value *> VL) {
1057 BasicBlock *BB = getSameBlock(VL);
1058 assert(BB && "All instructions must come from the same block");
1059 BlockNumbering &BN = BlocksNumbers[BB];
1061 // Find the first user of the values.
1062 int FirstUser = BN.getIndex(BB->getTerminator());
1063 for (unsigned i = 0, e = VL.size(); i < e; ++i) {
1064 for (Value::use_iterator U = VL[i]->use_begin(), UE = VL[i]->use_end();
1066 Instruction *Instr = dyn_cast<Instruction>(*U);
1068 if (!Instr || Instr->getParent() != BB)
1071 FirstUser = std::min(FirstUser, BN.getIndex(Instr));
1077 Value *BoUpSLP::Gather(ArrayRef<Value *> VL, VectorType *Ty) {
1078 Value *Vec = UndefValue::get(Ty);
1079 // Generate the 'InsertElement' instruction.
1080 for (unsigned i = 0; i < Ty->getNumElements(); ++i) {
1081 Vec = Builder.CreateInsertElement(Vec, VL[i], Builder.getInt32(i));
1082 if (Instruction *Insrt = dyn_cast<Instruction>(Vec)) {
1083 GatherSeq.insert(Insrt);
1085 // Add to our 'need-to-extract' list.
1086 if (ScalarToTreeEntry.count(VL[i])) {
1087 int Idx = ScalarToTreeEntry[VL[i]];
1088 TreeEntry *E = &VectorizableTree[Idx];
1089 // Find which lane we need to extract.
1091 for (unsigned Lane = 0, LE = VL.size(); Lane != LE; ++Lane) {
1092 // Is this the lane of the scalar that we are looking for ?
1093 if (E->Scalars[Lane] == VL[i]) {
1098 assert(FoundLane >= 0 && "Could not find the correct lane");
1099 ExternalUses.push_back(ExternalUser(VL[i], Insrt, FoundLane));
1107 Value *BoUpSLP::vectorizeTree(ArrayRef<Value *> VL) {
1108 if (ScalarToTreeEntry.count(VL[0])) {
1109 int Idx = ScalarToTreeEntry[VL[0]];
1110 TreeEntry *E = &VectorizableTree[Idx];
1112 return vectorizeTree(E);
1115 Type *ScalarTy = VL[0]->getType();
1116 if (StoreInst *SI = dyn_cast<StoreInst>(VL[0]))
1117 ScalarTy = SI->getValueOperand()->getType();
1118 VectorType *VecTy = VectorType::get(ScalarTy, VL.size());
1120 return Gather(VL, VecTy);
1123 Value *BoUpSLP::vectorizeTree(TreeEntry *E) {
1124 BuilderLocGuard Guard(Builder);
1126 if (E->VectorizedValue) {
1127 DEBUG(dbgs() << "SLP: Diamond merged for " << *E->Scalars[0] << ".\n");
1128 return E->VectorizedValue;
1131 Type *ScalarTy = E->Scalars[0]->getType();
1132 if (StoreInst *SI = dyn_cast<StoreInst>(E->Scalars[0]))
1133 ScalarTy = SI->getValueOperand()->getType();
1134 VectorType *VecTy = VectorType::get(ScalarTy, E->Scalars.size());
1136 if (E->NeedToGather) {
1137 return Gather(E->Scalars, VecTy);
1140 Instruction *VL0 = cast<Instruction>(E->Scalars[0]);
1141 unsigned Opcode = VL0->getOpcode();
1142 assert(Opcode == getSameOpcode(E->Scalars) && "Invalid opcode");
1145 case Instruction::PHI: {
1146 PHINode *PH = dyn_cast<PHINode>(VL0);
1147 Builder.SetInsertPoint(PH->getParent()->getFirstInsertionPt());
1148 PHINode *NewPhi = Builder.CreatePHI(VecTy, PH->getNumIncomingValues());
1149 E->VectorizedValue = NewPhi;
1151 for (unsigned i = 0, e = PH->getNumIncomingValues(); i < e; ++i) {
1153 BasicBlock *IBB = PH->getIncomingBlock(i);
1155 // Prepare the operand vector.
1156 for (unsigned j = 0; j < E->Scalars.size(); ++j)
1157 Operands.push_back(cast<PHINode>(E->Scalars[j])->
1158 getIncomingValueForBlock(IBB));
1160 Builder.SetInsertPoint(IBB->getTerminator());
1161 Value *Vec = vectorizeTree(Operands);
1162 NewPhi->addIncoming(Vec, IBB);
1165 assert(NewPhi->getNumIncomingValues() == PH->getNumIncomingValues() &&
1166 "Invalid number of incoming values");
1170 case Instruction::ExtractElement: {
1171 if (CanReuseExtract(E->Scalars)) {
1172 Value *V = VL0->getOperand(0);
1173 E->VectorizedValue = V;
1176 return Gather(E->Scalars, VecTy);
1178 case Instruction::ZExt:
1179 case Instruction::SExt:
1180 case Instruction::FPToUI:
1181 case Instruction::FPToSI:
1182 case Instruction::FPExt:
1183 case Instruction::PtrToInt:
1184 case Instruction::IntToPtr:
1185 case Instruction::SIToFP:
1186 case Instruction::UIToFP:
1187 case Instruction::Trunc:
1188 case Instruction::FPTrunc:
1189 case Instruction::BitCast: {
1191 for (int i = 0, e = E->Scalars.size(); i < e; ++i)
1192 INVL.push_back(cast<Instruction>(E->Scalars[i])->getOperand(0));
1194 Builder.SetInsertPoint(getLastInstruction(E->Scalars));
1195 Value *InVec = vectorizeTree(INVL);
1196 CastInst *CI = dyn_cast<CastInst>(VL0);
1197 Value *V = Builder.CreateCast(CI->getOpcode(), InVec, VecTy);
1198 E->VectorizedValue = V;
1201 case Instruction::FCmp:
1202 case Instruction::ICmp: {
1203 ValueList LHSV, RHSV;
1204 for (int i = 0, e = E->Scalars.size(); i < e; ++i) {
1205 LHSV.push_back(cast<Instruction>(E->Scalars[i])->getOperand(0));
1206 RHSV.push_back(cast<Instruction>(E->Scalars[i])->getOperand(1));
1209 Builder.SetInsertPoint(getLastInstruction(E->Scalars));
1210 Value *L = vectorizeTree(LHSV);
1211 Value *R = vectorizeTree(RHSV);
1214 CmpInst::Predicate P0 = dyn_cast<CmpInst>(VL0)->getPredicate();
1215 if (Opcode == Instruction::FCmp)
1216 V = Builder.CreateFCmp(P0, L, R);
1218 V = Builder.CreateICmp(P0, L, R);
1220 E->VectorizedValue = V;
1223 case Instruction::Select: {
1224 ValueList TrueVec, FalseVec, CondVec;
1225 for (int i = 0, e = E->Scalars.size(); i < e; ++i) {
1226 CondVec.push_back(cast<Instruction>(E->Scalars[i])->getOperand(0));
1227 TrueVec.push_back(cast<Instruction>(E->Scalars[i])->getOperand(1));
1228 FalseVec.push_back(cast<Instruction>(E->Scalars[i])->getOperand(2));
1231 Builder.SetInsertPoint(getLastInstruction(E->Scalars));
1232 Value *Cond = vectorizeTree(CondVec);
1233 Value *True = vectorizeTree(TrueVec);
1234 Value *False = vectorizeTree(FalseVec);
1235 Value *V = Builder.CreateSelect(Cond, True, False);
1236 E->VectorizedValue = V;
1239 case Instruction::Add:
1240 case Instruction::FAdd:
1241 case Instruction::Sub:
1242 case Instruction::FSub:
1243 case Instruction::Mul:
1244 case Instruction::FMul:
1245 case Instruction::UDiv:
1246 case Instruction::SDiv:
1247 case Instruction::FDiv:
1248 case Instruction::URem:
1249 case Instruction::SRem:
1250 case Instruction::FRem:
1251 case Instruction::Shl:
1252 case Instruction::LShr:
1253 case Instruction::AShr:
1254 case Instruction::And:
1255 case Instruction::Or:
1256 case Instruction::Xor: {
1257 ValueList LHSVL, RHSVL;
1258 for (int i = 0, e = E->Scalars.size(); i < e; ++i) {
1259 LHSVL.push_back(cast<Instruction>(E->Scalars[i])->getOperand(0));
1260 RHSVL.push_back(cast<Instruction>(E->Scalars[i])->getOperand(1));
1263 Builder.SetInsertPoint(getLastInstruction(E->Scalars));
1264 Value *LHS = vectorizeTree(LHSVL);
1265 Value *RHS = vectorizeTree(RHSVL);
1267 if (LHS == RHS && isa<Instruction>(LHS)) {
1268 assert((VL0->getOperand(0) == VL0->getOperand(1)) && "Invalid order");
1271 BinaryOperator *BinOp = cast<BinaryOperator>(VL0);
1272 Value *V = Builder.CreateBinOp(BinOp->getOpcode(), LHS, RHS);
1273 E->VectorizedValue = V;
1276 case Instruction::Load: {
1277 // Loads are inserted at the head of the tree because we don't want to
1278 // sink them all the way down past store instructions.
1279 Builder.SetInsertPoint(getLastInstruction(E->Scalars));
1280 LoadInst *LI = cast<LoadInst>(VL0);
1282 Builder.CreateBitCast(LI->getPointerOperand(), VecTy->getPointerTo());
1283 unsigned Alignment = LI->getAlignment();
1284 LI = Builder.CreateLoad(VecPtr);
1285 LI->setAlignment(Alignment);
1286 E->VectorizedValue = LI;
1289 case Instruction::Store: {
1290 StoreInst *SI = cast<StoreInst>(VL0);
1291 unsigned Alignment = SI->getAlignment();
1294 for (int i = 0, e = E->Scalars.size(); i < e; ++i)
1295 ValueOp.push_back(cast<StoreInst>(E->Scalars[i])->getValueOperand());
1297 Builder.SetInsertPoint(getLastInstruction(E->Scalars));
1298 Value *VecValue = vectorizeTree(ValueOp);
1300 Builder.CreateBitCast(SI->getPointerOperand(), VecTy->getPointerTo());
1301 StoreInst *S = Builder.CreateStore(VecValue, VecPtr);
1302 S->setAlignment(Alignment);
1303 E->VectorizedValue = S;
1307 llvm_unreachable("unknown inst");
1312 void BoUpSLP::vectorizeTree() {
1313 Builder.SetInsertPoint(F->getEntryBlock().begin());
1314 vectorizeTree(&VectorizableTree[0]);
1316 DEBUG(dbgs() << "SLP: Extracting " << ExternalUses.size() << " values .\n");
1318 // Extract all of the elements with the external uses.
1319 for (UserList::iterator it = ExternalUses.begin(), e = ExternalUses.end();
1321 Value *Scalar = it->Scalar;
1322 llvm::User *User = it->User;
1324 // Skip users that we already RAUW. This happens when one instruction
1325 // has multiple uses of the same value.
1326 if (std::find(Scalar->use_begin(), Scalar->use_end(), User) ==
1329 assert(ScalarToTreeEntry.count(Scalar) && "Invalid scalar");
1331 int Idx = ScalarToTreeEntry[Scalar];
1332 TreeEntry *E = &VectorizableTree[Idx];
1333 assert(!E->NeedToGather && "Extracting from a gather list");
1335 Value *Vec = E->VectorizedValue;
1336 assert(Vec && "Can't find vectorizable value");
1338 // Generate extracts for out-of-tree users.
1339 // Find the insertion point for the extractelement lane.
1340 Instruction *Loc = 0;
1341 if (PHINode *PN = dyn_cast<PHINode>(Vec)) {
1342 Loc = PN->getParent()->getFirstInsertionPt();
1343 } else if (isa<Instruction>(Vec)){
1344 if (PHINode *PH = dyn_cast<PHINode>(User)) {
1345 for (int i = 0, e = PH->getNumIncomingValues(); i != e; ++i) {
1346 if (PH->getIncomingValue(i) == Scalar) {
1347 Loc = PH->getIncomingBlock(i)->getTerminator();
1351 assert(Loc && "Unable to find incoming value for the PHI");
1353 Loc = cast<Instruction>(User);
1356 Loc = F->getEntryBlock().begin();
1359 Builder.SetInsertPoint(Loc);
1360 Value *Ex = Builder.CreateExtractElement(Vec, Builder.getInt32(it->Lane));
1361 User->replaceUsesOfWith(Scalar, Ex);
1362 DEBUG(dbgs() << "SLP: Replaced:" << *User << ".\n");
1365 // For each vectorized value:
1366 for (int EIdx = 0, EE = VectorizableTree.size(); EIdx < EE; ++EIdx) {
1367 TreeEntry *Entry = &VectorizableTree[EIdx];
1370 for (int Lane = 0, LE = Entry->Scalars.size(); Lane != LE; ++Lane) {
1371 Value *Scalar = Entry->Scalars[Lane];
1373 // No need to handle users of gathered values.
1374 if (Entry->NeedToGather)
1377 assert(Entry->VectorizedValue && "Can't find vectorizable value");
1379 Type *Ty = Scalar->getType();
1380 if (!Ty->isVoidTy()) {
1381 for (Value::use_iterator User = Scalar->use_begin(), UE = Scalar->use_end();
1382 User != UE; ++User) {
1383 DEBUG(dbgs() << "SLP: \tvalidating user:" << **User << ".\n");
1384 assert(!MustGather.count(*User) &&
1385 "Replacing gathered value with undef");
1386 assert(ScalarToTreeEntry.count(*User) &&
1387 "Replacing out-of-tree value with undef");
1389 Value *Undef = UndefValue::get(Ty);
1390 Scalar->replaceAllUsesWith(Undef);
1392 DEBUG(dbgs() << "SLP: \tErasing scalar:" << *Scalar << ".\n");
1393 cast<Instruction>(Scalar)->eraseFromParent();
1397 for (Function::iterator it = F->begin(), e = F->end(); it != e; ++it) {
1398 BlocksNumbers[it].forget();
1400 Builder.ClearInsertionPoint();
1403 void BoUpSLP::optimizeGatherSequence() {
1404 DEBUG(dbgs() << "SLP: Optimizing " << GatherSeq.size()
1405 << " gather sequences instructions.\n");
1406 // LICM InsertElementInst sequences.
1407 for (SetVector<Instruction *>::iterator it = GatherSeq.begin(),
1408 e = GatherSeq.end(); it != e; ++it) {
1409 InsertElementInst *Insert = dyn_cast<InsertElementInst>(*it);
1414 // Check if this block is inside a loop.
1415 Loop *L = LI->getLoopFor(Insert->getParent());
1419 // Check if it has a preheader.
1420 BasicBlock *PreHeader = L->getLoopPreheader();
1424 // If the vector or the element that we insert into it are
1425 // instructions that are defined in this basic block then we can't
1426 // hoist this instruction.
1427 Instruction *CurrVec = dyn_cast<Instruction>(Insert->getOperand(0));
1428 Instruction *NewElem = dyn_cast<Instruction>(Insert->getOperand(1));
1429 if (CurrVec && L->contains(CurrVec))
1431 if (NewElem && L->contains(NewElem))
1434 // We can hoist this instruction. Move it to the pre-header.
1435 Insert->moveBefore(PreHeader->getTerminator());
1438 // Perform O(N^2) search over the gather sequences and merge identical
1439 // instructions. TODO: We can further optimize this scan if we split the
1440 // instructions into different buckets based on the insert lane.
1441 SmallPtrSet<Instruction*, 16> Visited;
1442 SmallVector<Instruction*, 16> ToRemove;
1443 ReversePostOrderTraversal<Function*> RPOT(F);
1444 for (ReversePostOrderTraversal<Function*>::rpo_iterator I = RPOT.begin(),
1445 E = RPOT.end(); I != E; ++I) {
1446 BasicBlock *BB = *I;
1447 // For all instructions in the function:
1448 for (BasicBlock::iterator it = BB->begin(), e = BB->end(); it != e; ++it) {
1449 Instruction *In = it;
1450 if ((!isa<InsertElementInst>(In) && !isa<ExtractElementInst>(In)) ||
1451 !GatherSeq.count(In))
1454 // Check if we can replace this instruction with any of the
1455 // visited instructions.
1456 for (SmallPtrSet<Instruction*, 16>::iterator v = Visited.begin(),
1457 ve = Visited.end(); v != ve; ++v) {
1458 if (In->isIdenticalTo(*v) &&
1459 DT->dominates((*v)->getParent(), In->getParent())) {
1460 In->replaceAllUsesWith(*v);
1461 ToRemove.push_back(In);
1471 // Erase all of the instructions that we RAUWed.
1472 for (SmallVectorImpl<Instruction *>::iterator v = ToRemove.begin(),
1473 ve = ToRemove.end(); v != ve; ++v) {
1474 assert((*v)->getNumUses() == 0 && "Can't remove instructions with uses");
1475 (*v)->eraseFromParent();
1479 /// The SLPVectorizer Pass.
1480 struct SLPVectorizer : public FunctionPass {
1481 typedef SmallVector<StoreInst *, 8> StoreList;
1482 typedef MapVector<Value *, StoreList> StoreListMap;
1484 /// Pass identification, replacement for typeid
1487 explicit SLPVectorizer() : FunctionPass(ID) {
1488 initializeSLPVectorizerPass(*PassRegistry::getPassRegistry());
1491 ScalarEvolution *SE;
1493 TargetTransformInfo *TTI;
1498 virtual bool runOnFunction(Function &F) {
1499 SE = &getAnalysis<ScalarEvolution>();
1500 DL = getAnalysisIfAvailable<DataLayout>();
1501 TTI = &getAnalysis<TargetTransformInfo>();
1502 AA = &getAnalysis<AliasAnalysis>();
1503 LI = &getAnalysis<LoopInfo>();
1504 DT = &getAnalysis<DominatorTree>();
1507 bool Changed = false;
1509 // Must have DataLayout. We can't require it because some tests run w/o
1514 DEBUG(dbgs() << "SLP: Analyzing blocks in " << F.getName() << ".\n");
1516 // Use the bollom up slp vectorizer to construct chains that start with
1517 // he store instructions.
1518 BoUpSLP R(&F, SE, DL, TTI, AA, LI, DT);
1520 // Scan the blocks in the function in post order.
1521 for (po_iterator<BasicBlock*> it = po_begin(&F.getEntryBlock()),
1522 e = po_end(&F.getEntryBlock()); it != e; ++it) {
1523 BasicBlock *BB = *it;
1525 // Vectorize trees that end at reductions.
1526 Changed |= vectorizeChainsInBlock(BB, R);
1528 // Vectorize trees that end at stores.
1529 if (unsigned count = collectStores(BB, R)) {
1531 DEBUG(dbgs() << "SLP: Found " << count << " stores to vectorize.\n");
1532 Changed |= vectorizeStoreChains(R);
1537 R.optimizeGatherSequence();
1538 DEBUG(dbgs() << "SLP: vectorized \"" << F.getName() << "\"\n");
1539 DEBUG(verifyFunction(F));
1544 virtual void getAnalysisUsage(AnalysisUsage &AU) const {
1545 FunctionPass::getAnalysisUsage(AU);
1546 AU.addRequired<ScalarEvolution>();
1547 AU.addRequired<AliasAnalysis>();
1548 AU.addRequired<TargetTransformInfo>();
1549 AU.addRequired<LoopInfo>();
1550 AU.addRequired<DominatorTree>();
1551 AU.addPreserved<LoopInfo>();
1552 AU.addPreserved<DominatorTree>();
1553 AU.setPreservesCFG();
1558 /// \brief Collect memory references and sort them according to their base
1559 /// object. We sort the stores to their base objects to reduce the cost of the
1560 /// quadratic search on the stores. TODO: We can further reduce this cost
1561 /// if we flush the chain creation every time we run into a memory barrier.
1562 unsigned collectStores(BasicBlock *BB, BoUpSLP &R);
1564 /// \brief Try to vectorize a chain that starts at two arithmetic instrs.
1565 bool tryToVectorizePair(Value *A, Value *B, BoUpSLP &R);
1567 /// \brief Try to vectorize a list of operands.
1568 /// \returns true if a value was vectorized.
1569 bool tryToVectorizeList(ArrayRef<Value *> VL, BoUpSLP &R);
1571 /// \brief Try to vectorize a chain that may start at the operands of \V;
1572 bool tryToVectorize(BinaryOperator *V, BoUpSLP &R);
1574 /// \brief Vectorize the stores that were collected in StoreRefs.
1575 bool vectorizeStoreChains(BoUpSLP &R);
1577 /// \brief Scan the basic block and look for patterns that are likely to start
1578 /// a vectorization chain.
1579 bool vectorizeChainsInBlock(BasicBlock *BB, BoUpSLP &R);
1581 bool vectorizeStoreChain(ArrayRef<Value *> Chain, int CostThreshold,
1584 bool vectorizeStores(ArrayRef<StoreInst *> Stores, int costThreshold,
1587 StoreListMap StoreRefs;
1590 bool SLPVectorizer::vectorizeStoreChain(ArrayRef<Value *> Chain,
1591 int CostThreshold, BoUpSLP &R) {
1592 unsigned ChainLen = Chain.size();
1593 DEBUG(dbgs() << "SLP: Analyzing a store chain of length " << ChainLen
1595 Type *StoreTy = cast<StoreInst>(Chain[0])->getValueOperand()->getType();
1596 unsigned Sz = DL->getTypeSizeInBits(StoreTy);
1597 unsigned VF = MinVecRegSize / Sz;
1599 if (!isPowerOf2_32(Sz) || VF < 2)
1602 bool Changed = false;
1603 // Look for profitable vectorizable trees at all offsets, starting at zero.
1604 for (unsigned i = 0, e = ChainLen; i < e; ++i) {
1607 DEBUG(dbgs() << "SLP: Analyzing " << VF << " stores at offset " << i
1609 ArrayRef<Value *> Operands = Chain.slice(i, VF);
1611 R.buildTree(Operands);
1613 int Cost = R.getTreeCost();
1615 DEBUG(dbgs() << "SLP: Found cost=" << Cost << " for VF=" << VF << "\n");
1616 if (Cost < CostThreshold) {
1617 DEBUG(dbgs() << "SLP: Decided to vectorize cost=" << Cost << "\n");
1620 // Move to the next bundle.
1626 if (Changed || ChainLen > VF)
1629 // Handle short chains. This helps us catch types such as <3 x float> that
1630 // are smaller than vector size.
1633 int Cost = R.getTreeCost();
1635 if (Cost < CostThreshold) {
1636 DEBUG(dbgs() << "SLP: Found store chain cost = " << Cost
1637 << " for size = " << ChainLen << "\n");
1645 bool SLPVectorizer::vectorizeStores(ArrayRef<StoreInst *> Stores,
1646 int costThreshold, BoUpSLP &R) {
1647 SetVector<Value *> Heads, Tails;
1648 SmallDenseMap<Value *, Value *> ConsecutiveChain;
1650 // We may run into multiple chains that merge into a single chain. We mark the
1651 // stores that we vectorized so that we don't visit the same store twice.
1652 BoUpSLP::ValueSet VectorizedStores;
1653 bool Changed = false;
1655 // Do a quadratic search on all of the given stores and find
1656 // all of the pairs of loads that follow each other.
1657 for (unsigned i = 0, e = Stores.size(); i < e; ++i)
1658 for (unsigned j = 0; j < e; ++j) {
1662 if (R.isConsecutiveAccess(Stores[i], Stores[j])) {
1663 Tails.insert(Stores[j]);
1664 Heads.insert(Stores[i]);
1665 ConsecutiveChain[Stores[i]] = Stores[j];
1669 // For stores that start but don't end a link in the chain:
1670 for (SetVector<Value *>::iterator it = Heads.begin(), e = Heads.end();
1672 if (Tails.count(*it))
1675 // We found a store instr that starts a chain. Now follow the chain and try
1677 BoUpSLP::ValueList Operands;
1679 // Collect the chain into a list.
1680 while (Tails.count(I) || Heads.count(I)) {
1681 if (VectorizedStores.count(I))
1683 Operands.push_back(I);
1684 // Move to the next value in the chain.
1685 I = ConsecutiveChain[I];
1688 bool Vectorized = vectorizeStoreChain(Operands, costThreshold, R);
1690 // Mark the vectorized stores so that we don't vectorize them again.
1692 VectorizedStores.insert(Operands.begin(), Operands.end());
1693 Changed |= Vectorized;
1700 unsigned SLPVectorizer::collectStores(BasicBlock *BB, BoUpSLP &R) {
1703 for (BasicBlock::iterator it = BB->begin(), e = BB->end(); it != e; ++it) {
1704 StoreInst *SI = dyn_cast<StoreInst>(it);
1708 // Check that the pointer points to scalars.
1709 Type *Ty = SI->getValueOperand()->getType();
1710 if (Ty->isAggregateType() || Ty->isVectorTy())
1713 // Find the base of the GEP.
1714 Value *Ptr = SI->getPointerOperand();
1715 if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Ptr))
1716 Ptr = GEP->getPointerOperand();
1718 // Save the store locations.
1719 StoreRefs[Ptr].push_back(SI);
1725 bool SLPVectorizer::tryToVectorizePair(Value *A, Value *B, BoUpSLP &R) {
1728 Value *VL[] = { A, B };
1729 return tryToVectorizeList(VL, R);
1732 bool SLPVectorizer::tryToVectorizeList(ArrayRef<Value *> VL, BoUpSLP &R) {
1736 DEBUG(dbgs() << "SLP: Vectorizing a list of length = " << VL.size() << ".\n");
1738 // Check that all of the parts are scalar instructions of the same type.
1739 Instruction *I0 = dyn_cast<Instruction>(VL[0]);
1743 unsigned Opcode0 = I0->getOpcode();
1745 for (int i = 0, e = VL.size(); i < e; ++i) {
1746 Type *Ty = VL[i]->getType();
1747 if (Ty->isAggregateType() || Ty->isVectorTy())
1749 Instruction *Inst = dyn_cast<Instruction>(VL[i]);
1750 if (!Inst || Inst->getOpcode() != Opcode0)
1755 int Cost = R.getTreeCost();
1757 if (Cost >= -SLPCostThreshold)
1760 DEBUG(dbgs() << "SLP: Vectorizing pair at cost:" << Cost << ".\n");
1765 bool SLPVectorizer::tryToVectorize(BinaryOperator *V, BoUpSLP &R) {
1769 // Try to vectorize V.
1770 if (tryToVectorizePair(V->getOperand(0), V->getOperand(1), R))
1773 BinaryOperator *A = dyn_cast<BinaryOperator>(V->getOperand(0));
1774 BinaryOperator *B = dyn_cast<BinaryOperator>(V->getOperand(1));
1776 if (B && B->hasOneUse()) {
1777 BinaryOperator *B0 = dyn_cast<BinaryOperator>(B->getOperand(0));
1778 BinaryOperator *B1 = dyn_cast<BinaryOperator>(B->getOperand(1));
1779 if (tryToVectorizePair(A, B0, R)) {
1783 if (tryToVectorizePair(A, B1, R)) {
1790 if (A && A->hasOneUse()) {
1791 BinaryOperator *A0 = dyn_cast<BinaryOperator>(A->getOperand(0));
1792 BinaryOperator *A1 = dyn_cast<BinaryOperator>(A->getOperand(1));
1793 if (tryToVectorizePair(A0, B, R)) {
1797 if (tryToVectorizePair(A1, B, R)) {
1805 bool SLPVectorizer::vectorizeChainsInBlock(BasicBlock *BB, BoUpSLP &R) {
1806 bool Changed = false;
1807 SmallVector<Value *, 4> Incoming;
1808 // Collect the incoming values from the PHIs.
1809 for (BasicBlock::iterator instr = BB->begin(), ie = BB->end(); instr != ie;
1811 PHINode *P = dyn_cast<PHINode>(instr);
1816 // Stop constructing the list when you reach a different type.
1817 if (Incoming.size() && P->getType() != Incoming[0]->getType()) {
1818 Changed |= tryToVectorizeList(Incoming, R);
1822 Incoming.push_back(P);
1825 if (Incoming.size() > 1)
1826 Changed |= tryToVectorizeList(Incoming, R);
1828 for (BasicBlock::iterator it = BB->begin(), e = BB->end(); it != e; ++it) {
1829 if (isa<DbgInfoIntrinsic>(it))
1832 // Try to vectorize reductions that use PHINodes.
1833 if (PHINode *P = dyn_cast<PHINode>(it)) {
1834 // Check that the PHI is a reduction PHI.
1835 if (P->getNumIncomingValues() != 2)
1838 (P->getIncomingBlock(0) == BB
1839 ? (P->getIncomingValue(0))
1840 : (P->getIncomingBlock(1) == BB ? P->getIncomingValue(1) : 0));
1841 // Check if this is a Binary Operator.
1842 BinaryOperator *BI = dyn_cast_or_null<BinaryOperator>(Rdx);
1846 Value *Inst = BI->getOperand(0);
1848 Inst = BI->getOperand(1);
1850 Changed |= tryToVectorize(dyn_cast<BinaryOperator>(Inst), R);
1854 // Try to vectorize trees that start at compare instructions.
1855 if (CmpInst *CI = dyn_cast<CmpInst>(it)) {
1856 if (tryToVectorizePair(CI->getOperand(0), CI->getOperand(1), R)) {
1860 for (int i = 0; i < 2; ++i)
1861 if (BinaryOperator *BI = dyn_cast<BinaryOperator>(CI->getOperand(i)))
1863 tryToVectorizePair(BI->getOperand(0), BI->getOperand(1), R);
1871 bool SLPVectorizer::vectorizeStoreChains(BoUpSLP &R) {
1872 bool Changed = false;
1873 // Attempt to sort and vectorize each of the store-groups.
1874 for (StoreListMap::iterator it = StoreRefs.begin(), e = StoreRefs.end();
1876 if (it->second.size() < 2)
1879 DEBUG(dbgs() << "SLP: Analyzing a store chain of length "
1880 << it->second.size() << ".\n");
1882 Changed |= vectorizeStores(it->second, -SLPCostThreshold, R);
1887 } // end anonymous namespace
1889 char SLPVectorizer::ID = 0;
1890 static const char lv_name[] = "SLP Vectorizer";
1891 INITIALIZE_PASS_BEGIN(SLPVectorizer, SV_NAME, lv_name, false, false)
1892 INITIALIZE_AG_DEPENDENCY(AliasAnalysis)
1893 INITIALIZE_AG_DEPENDENCY(TargetTransformInfo)
1894 INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
1895 INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
1896 INITIALIZE_PASS_END(SLPVectorizer, SV_NAME, lv_name, false, false)
1899 Pass *createSLPVectorizerPass() { return new SLPVectorizer(); }