1 //===- IndVarSimplify.cpp - Induction Variable Elimination ----------------===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This transformation analyzes and transforms the induction variables (and
11 // computations derived from them) into simpler forms suitable for subsequent
12 // analysis and transformation.
14 // If the trip count of a loop is computable, this pass also makes the following
16 // 1. The exit condition for the loop is canonicalized to compare the
17 // induction value against the exit value. This turns loops like:
18 // 'for (i = 7; i*i < 1000; ++i)' into 'for (i = 0; i != 25; ++i)'
19 // 2. Any use outside of the loop of an expression derived from the indvar
20 // is changed to compute the derived value outside of the loop, eliminating
21 // the dependence on the exit value of the induction variable. If the only
22 // purpose of the loop is to compute the exit value of some derived
23 // expression, this transformation will make the loop dead.
25 //===----------------------------------------------------------------------===//
27 #define DEBUG_TYPE "indvars"
28 #include "llvm/Transforms/Scalar.h"
29 #include "llvm/ADT/DenseMap.h"
30 #include "llvm/ADT/SmallVector.h"
31 #include "llvm/ADT/Statistic.h"
32 #include "llvm/Analysis/Dominators.h"
33 #include "llvm/Analysis/LoopInfo.h"
34 #include "llvm/Analysis/LoopPass.h"
35 #include "llvm/Analysis/ScalarEvolutionExpander.h"
36 #include "llvm/IR/BasicBlock.h"
37 #include "llvm/IR/Constants.h"
38 #include "llvm/IR/DataLayout.h"
39 #include "llvm/IR/Instructions.h"
40 #include "llvm/IR/IntrinsicInst.h"
41 #include "llvm/IR/LLVMContext.h"
42 #include "llvm/IR/Type.h"
43 #include "llvm/Support/CFG.h"
44 #include "llvm/Support/CommandLine.h"
45 #include "llvm/Support/Debug.h"
46 #include "llvm/Support/raw_ostream.h"
47 #include "llvm/Target/TargetLibraryInfo.h"
48 #include "llvm/Transforms/Utils/BasicBlockUtils.h"
49 #include "llvm/Transforms/Utils/Local.h"
50 #include "llvm/Transforms/Utils/SimplifyIndVar.h"
53 STATISTIC(NumWidened , "Number of indvars widened");
54 STATISTIC(NumReplaced , "Number of exit values replaced");
55 STATISTIC(NumLFTR , "Number of loop exit tests replaced");
56 STATISTIC(NumElimExt , "Number of IV sign/zero extends eliminated");
57 STATISTIC(NumElimIV , "Number of congruent IVs eliminated");
59 // Trip count verification can be enabled by default under NDEBUG if we
60 // implement a strong expression equivalence checker in SCEV. Until then, we
61 // use the verify-indvars flag, which may assert in some cases.
62 static cl::opt<bool> VerifyIndvars(
63 "verify-indvars", cl::Hidden,
64 cl::desc("Verify the ScalarEvolution result after running indvars"));
66 static cl::opt<bool> ReduceLiveIVs("liv-reduce", cl::Hidden,
67 cl::desc("Reduce live induction variables."));
70 class IndVarSimplify : public LoopPass {
75 TargetLibraryInfo *TLI;
77 SmallVector<WeakVH, 16> DeadInsts;
81 static char ID; // Pass identification, replacement for typeid
82 IndVarSimplify() : LoopPass(ID), LI(0), SE(0), DT(0), TD(0),
84 initializeIndVarSimplifyPass(*PassRegistry::getPassRegistry());
87 virtual bool runOnLoop(Loop *L, LPPassManager &LPM);
89 virtual void getAnalysisUsage(AnalysisUsage &AU) const {
90 AU.addRequired<DominatorTree>();
91 AU.addRequired<LoopInfo>();
92 AU.addRequired<ScalarEvolution>();
93 AU.addRequiredID(LoopSimplifyID);
94 AU.addRequiredID(LCSSAID);
95 AU.addPreserved<ScalarEvolution>();
96 AU.addPreservedID(LoopSimplifyID);
97 AU.addPreservedID(LCSSAID);
102 virtual void releaseMemory() {
106 bool isValidRewrite(Value *FromVal, Value *ToVal);
108 void HandleFloatingPointIV(Loop *L, PHINode *PH);
109 void RewriteNonIntegerIVs(Loop *L);
111 void SimplifyAndExtend(Loop *L, SCEVExpander &Rewriter, LPPassManager &LPM);
113 void RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter);
115 Value *LinearFunctionTestReplace(Loop *L, const SCEV *BackedgeTakenCount,
116 PHINode *IndVar, SCEVExpander &Rewriter);
118 void SinkUnusedInvariants(Loop *L);
122 char IndVarSimplify::ID = 0;
123 INITIALIZE_PASS_BEGIN(IndVarSimplify, "indvars",
124 "Induction Variable Simplification", false, false)
125 INITIALIZE_PASS_DEPENDENCY(DominatorTree)
126 INITIALIZE_PASS_DEPENDENCY(LoopInfo)
127 INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
128 INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
129 INITIALIZE_PASS_DEPENDENCY(LCSSA)
130 INITIALIZE_PASS_END(IndVarSimplify, "indvars",
131 "Induction Variable Simplification", false, false)
133 Pass *llvm::createIndVarSimplifyPass() {
134 return new IndVarSimplify();
137 /// isValidRewrite - Return true if the SCEV expansion generated by the
138 /// rewriter can replace the original value. SCEV guarantees that it
139 /// produces the same value, but the way it is produced may be illegal IR.
140 /// Ideally, this function will only be called for verification.
141 bool IndVarSimplify::isValidRewrite(Value *FromVal, Value *ToVal) {
142 // If an SCEV expression subsumed multiple pointers, its expansion could
143 // reassociate the GEP changing the base pointer. This is illegal because the
144 // final address produced by a GEP chain must be inbounds relative to its
145 // underlying object. Otherwise basic alias analysis, among other things,
146 // could fail in a dangerous way. Ultimately, SCEV will be improved to avoid
147 // producing an expression involving multiple pointers. Until then, we must
150 // Retrieve the pointer operand of the GEP. Don't use GetUnderlyingObject
151 // because it understands lcssa phis while SCEV does not.
152 Value *FromPtr = FromVal;
153 Value *ToPtr = ToVal;
154 if (GEPOperator *GEP = dyn_cast<GEPOperator>(FromVal)) {
155 FromPtr = GEP->getPointerOperand();
157 if (GEPOperator *GEP = dyn_cast<GEPOperator>(ToVal)) {
158 ToPtr = GEP->getPointerOperand();
160 if (FromPtr != FromVal || ToPtr != ToVal) {
161 // Quickly check the common case
162 if (FromPtr == ToPtr)
165 // SCEV may have rewritten an expression that produces the GEP's pointer
166 // operand. That's ok as long as the pointer operand has the same base
167 // pointer. Unlike GetUnderlyingObject(), getPointerBase() will find the
168 // base of a recurrence. This handles the case in which SCEV expansion
169 // converts a pointer type recurrence into a nonrecurrent pointer base
170 // indexed by an integer recurrence.
172 // If the GEP base pointer is a vector of pointers, abort.
173 if (!FromPtr->getType()->isPointerTy() || !ToPtr->getType()->isPointerTy())
176 const SCEV *FromBase = SE->getPointerBase(SE->getSCEV(FromPtr));
177 const SCEV *ToBase = SE->getPointerBase(SE->getSCEV(ToPtr));
178 if (FromBase == ToBase)
181 DEBUG(dbgs() << "INDVARS: GEP rewrite bail out "
182 << *FromBase << " != " << *ToBase << "\n");
189 /// Determine the insertion point for this user. By default, insert immediately
190 /// before the user. SCEVExpander or LICM will hoist loop invariants out of the
191 /// loop. For PHI nodes, there may be multiple uses, so compute the nearest
192 /// common dominator for the incoming blocks.
193 static Instruction *getInsertPointForUses(Instruction *User, Value *Def,
195 PHINode *PHI = dyn_cast<PHINode>(User);
199 Instruction *InsertPt = 0;
200 for (unsigned i = 0, e = PHI->getNumIncomingValues(); i != e; ++i) {
201 if (PHI->getIncomingValue(i) != Def)
204 BasicBlock *InsertBB = PHI->getIncomingBlock(i);
206 InsertPt = InsertBB->getTerminator();
209 InsertBB = DT->findNearestCommonDominator(InsertPt->getParent(), InsertBB);
210 InsertPt = InsertBB->getTerminator();
212 assert(InsertPt && "Missing phi operand");
213 assert((!isa<Instruction>(Def) ||
214 DT->dominates(cast<Instruction>(Def), InsertPt)) &&
215 "def does not dominate all uses");
219 //===----------------------------------------------------------------------===//
220 // RewriteNonIntegerIVs and helpers. Prefer integer IVs.
221 //===----------------------------------------------------------------------===//
223 /// ConvertToSInt - Convert APF to an integer, if possible.
224 static bool ConvertToSInt(const APFloat &APF, int64_t &IntVal) {
225 bool isExact = false;
226 // See if we can convert this to an int64_t
228 if (APF.convertToInteger(&UIntVal, 64, true, APFloat::rmTowardZero,
229 &isExact) != APFloat::opOK || !isExact)
235 /// HandleFloatingPointIV - If the loop has floating induction variable
236 /// then insert corresponding integer induction variable if possible.
238 /// for(double i = 0; i < 10000; ++i)
240 /// is converted into
241 /// for(int i = 0; i < 10000; ++i)
244 void IndVarSimplify::HandleFloatingPointIV(Loop *L, PHINode *PN) {
245 unsigned IncomingEdge = L->contains(PN->getIncomingBlock(0));
246 unsigned BackEdge = IncomingEdge^1;
248 // Check incoming value.
249 ConstantFP *InitValueVal =
250 dyn_cast<ConstantFP>(PN->getIncomingValue(IncomingEdge));
253 if (!InitValueVal || !ConvertToSInt(InitValueVal->getValueAPF(), InitValue))
256 // Check IV increment. Reject this PN if increment operation is not
257 // an add or increment value can not be represented by an integer.
258 BinaryOperator *Incr =
259 dyn_cast<BinaryOperator>(PN->getIncomingValue(BackEdge));
260 if (Incr == 0 || Incr->getOpcode() != Instruction::FAdd) return;
262 // If this is not an add of the PHI with a constantfp, or if the constant fp
263 // is not an integer, bail out.
264 ConstantFP *IncValueVal = dyn_cast<ConstantFP>(Incr->getOperand(1));
266 if (IncValueVal == 0 || Incr->getOperand(0) != PN ||
267 !ConvertToSInt(IncValueVal->getValueAPF(), IncValue))
270 // Check Incr uses. One user is PN and the other user is an exit condition
271 // used by the conditional terminator.
272 Value::use_iterator IncrUse = Incr->use_begin();
273 Instruction *U1 = cast<Instruction>(*IncrUse++);
274 if (IncrUse == Incr->use_end()) return;
275 Instruction *U2 = cast<Instruction>(*IncrUse++);
276 if (IncrUse != Incr->use_end()) return;
278 // Find exit condition, which is an fcmp. If it doesn't exist, or if it isn't
279 // only used by a branch, we can't transform it.
280 FCmpInst *Compare = dyn_cast<FCmpInst>(U1);
282 Compare = dyn_cast<FCmpInst>(U2);
283 if (Compare == 0 || !Compare->hasOneUse() ||
284 !isa<BranchInst>(Compare->use_back()))
287 BranchInst *TheBr = cast<BranchInst>(Compare->use_back());
289 // We need to verify that the branch actually controls the iteration count
290 // of the loop. If not, the new IV can overflow and no one will notice.
291 // The branch block must be in the loop and one of the successors must be out
293 assert(TheBr->isConditional() && "Can't use fcmp if not conditional");
294 if (!L->contains(TheBr->getParent()) ||
295 (L->contains(TheBr->getSuccessor(0)) &&
296 L->contains(TheBr->getSuccessor(1))))
300 // If it isn't a comparison with an integer-as-fp (the exit value), we can't
302 ConstantFP *ExitValueVal = dyn_cast<ConstantFP>(Compare->getOperand(1));
304 if (ExitValueVal == 0 ||
305 !ConvertToSInt(ExitValueVal->getValueAPF(), ExitValue))
308 // Find new predicate for integer comparison.
309 CmpInst::Predicate NewPred = CmpInst::BAD_ICMP_PREDICATE;
310 switch (Compare->getPredicate()) {
311 default: return; // Unknown comparison.
312 case CmpInst::FCMP_OEQ:
313 case CmpInst::FCMP_UEQ: NewPred = CmpInst::ICMP_EQ; break;
314 case CmpInst::FCMP_ONE:
315 case CmpInst::FCMP_UNE: NewPred = CmpInst::ICMP_NE; break;
316 case CmpInst::FCMP_OGT:
317 case CmpInst::FCMP_UGT: NewPred = CmpInst::ICMP_SGT; break;
318 case CmpInst::FCMP_OGE:
319 case CmpInst::FCMP_UGE: NewPred = CmpInst::ICMP_SGE; break;
320 case CmpInst::FCMP_OLT:
321 case CmpInst::FCMP_ULT: NewPred = CmpInst::ICMP_SLT; break;
322 case CmpInst::FCMP_OLE:
323 case CmpInst::FCMP_ULE: NewPred = CmpInst::ICMP_SLE; break;
326 // We convert the floating point induction variable to a signed i32 value if
327 // we can. This is only safe if the comparison will not overflow in a way
328 // that won't be trapped by the integer equivalent operations. Check for this
330 // TODO: We could use i64 if it is native and the range requires it.
332 // The start/stride/exit values must all fit in signed i32.
333 if (!isInt<32>(InitValue) || !isInt<32>(IncValue) || !isInt<32>(ExitValue))
336 // If not actually striding (add x, 0.0), avoid touching the code.
340 // Positive and negative strides have different safety conditions.
342 // If we have a positive stride, we require the init to be less than the
344 if (InitValue >= ExitValue)
347 uint32_t Range = uint32_t(ExitValue-InitValue);
348 // Check for infinite loop, either:
349 // while (i <= Exit) or until (i > Exit)
350 if (NewPred == CmpInst::ICMP_SLE || NewPred == CmpInst::ICMP_SGT) {
351 if (++Range == 0) return; // Range overflows.
354 unsigned Leftover = Range % uint32_t(IncValue);
356 // If this is an equality comparison, we require that the strided value
357 // exactly land on the exit value, otherwise the IV condition will wrap
358 // around and do things the fp IV wouldn't.
359 if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
363 // If the stride would wrap around the i32 before exiting, we can't
365 if (Leftover != 0 && int32_t(ExitValue+IncValue) < ExitValue)
369 // If we have a negative stride, we require the init to be greater than the
371 if (InitValue <= ExitValue)
374 uint32_t Range = uint32_t(InitValue-ExitValue);
375 // Check for infinite loop, either:
376 // while (i >= Exit) or until (i < Exit)
377 if (NewPred == CmpInst::ICMP_SGE || NewPred == CmpInst::ICMP_SLT) {
378 if (++Range == 0) return; // Range overflows.
381 unsigned Leftover = Range % uint32_t(-IncValue);
383 // If this is an equality comparison, we require that the strided value
384 // exactly land on the exit value, otherwise the IV condition will wrap
385 // around and do things the fp IV wouldn't.
386 if ((NewPred == CmpInst::ICMP_EQ || NewPred == CmpInst::ICMP_NE) &&
390 // If the stride would wrap around the i32 before exiting, we can't
392 if (Leftover != 0 && int32_t(ExitValue+IncValue) > ExitValue)
396 IntegerType *Int32Ty = Type::getInt32Ty(PN->getContext());
398 // Insert new integer induction variable.
399 PHINode *NewPHI = PHINode::Create(Int32Ty, 2, PN->getName()+".int", PN);
400 NewPHI->addIncoming(ConstantInt::get(Int32Ty, InitValue),
401 PN->getIncomingBlock(IncomingEdge));
404 BinaryOperator::CreateAdd(NewPHI, ConstantInt::get(Int32Ty, IncValue),
405 Incr->getName()+".int", Incr);
406 NewPHI->addIncoming(NewAdd, PN->getIncomingBlock(BackEdge));
408 ICmpInst *NewCompare = new ICmpInst(TheBr, NewPred, NewAdd,
409 ConstantInt::get(Int32Ty, ExitValue),
412 // In the following deletions, PN may become dead and may be deleted.
413 // Use a WeakVH to observe whether this happens.
416 // Delete the old floating point exit comparison. The branch starts using the
418 NewCompare->takeName(Compare);
419 Compare->replaceAllUsesWith(NewCompare);
420 RecursivelyDeleteTriviallyDeadInstructions(Compare, TLI);
422 // Delete the old floating point increment.
423 Incr->replaceAllUsesWith(UndefValue::get(Incr->getType()));
424 RecursivelyDeleteTriviallyDeadInstructions(Incr, TLI);
426 // If the FP induction variable still has uses, this is because something else
427 // in the loop uses its value. In order to canonicalize the induction
428 // variable, we chose to eliminate the IV and rewrite it in terms of an
431 // We give preference to sitofp over uitofp because it is faster on most
434 Value *Conv = new SIToFPInst(NewPHI, PN->getType(), "indvar.conv",
435 PN->getParent()->getFirstInsertionPt());
436 PN->replaceAllUsesWith(Conv);
437 RecursivelyDeleteTriviallyDeadInstructions(PN, TLI);
442 void IndVarSimplify::RewriteNonIntegerIVs(Loop *L) {
443 // First step. Check to see if there are any floating-point recurrences.
444 // If there are, change them into integer recurrences, permitting analysis by
445 // the SCEV routines.
447 BasicBlock *Header = L->getHeader();
449 SmallVector<WeakVH, 8> PHIs;
450 for (BasicBlock::iterator I = Header->begin();
451 PHINode *PN = dyn_cast<PHINode>(I); ++I)
454 for (unsigned i = 0, e = PHIs.size(); i != e; ++i)
455 if (PHINode *PN = dyn_cast_or_null<PHINode>(&*PHIs[i]))
456 HandleFloatingPointIV(L, PN);
458 // If the loop previously had floating-point IV, ScalarEvolution
459 // may not have been able to compute a trip count. Now that we've done some
460 // re-writing, the trip count may be computable.
465 //===----------------------------------------------------------------------===//
466 // RewriteLoopExitValues - Optimize IV users outside the loop.
467 // As a side effect, reduces the amount of IV processing within the loop.
468 //===----------------------------------------------------------------------===//
470 /// RewriteLoopExitValues - Check to see if this loop has a computable
471 /// loop-invariant execution count. If so, this means that we can compute the
472 /// final value of any expressions that are recurrent in the loop, and
473 /// substitute the exit values from the loop into any instructions outside of
474 /// the loop that use the final values of the current expressions.
476 /// This is mostly redundant with the regular IndVarSimplify activities that
477 /// happen later, except that it's more powerful in some cases, because it's
478 /// able to brute-force evaluate arbitrary instructions as long as they have
479 /// constant operands at the beginning of the loop.
480 void IndVarSimplify::RewriteLoopExitValues(Loop *L, SCEVExpander &Rewriter) {
481 // Verify the input to the pass in already in LCSSA form.
482 assert(L->isLCSSAForm(*DT));
484 SmallVector<BasicBlock*, 8> ExitBlocks;
485 L->getUniqueExitBlocks(ExitBlocks);
487 // Find all values that are computed inside the loop, but used outside of it.
488 // Because of LCSSA, these values will only occur in LCSSA PHI Nodes. Scan
489 // the exit blocks of the loop to find them.
490 for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
491 BasicBlock *ExitBB = ExitBlocks[i];
493 // If there are no PHI nodes in this exit block, then no values defined
494 // inside the loop are used on this path, skip it.
495 PHINode *PN = dyn_cast<PHINode>(ExitBB->begin());
498 unsigned NumPreds = PN->getNumIncomingValues();
500 // Iterate over all of the PHI nodes.
501 BasicBlock::iterator BBI = ExitBB->begin();
502 while ((PN = dyn_cast<PHINode>(BBI++))) {
504 continue; // dead use, don't replace it
506 // SCEV only supports integer expressions for now.
507 if (!PN->getType()->isIntegerTy() && !PN->getType()->isPointerTy())
510 // It's necessary to tell ScalarEvolution about this explicitly so that
511 // it can walk the def-use list and forget all SCEVs, as it may not be
512 // watching the PHI itself. Once the new exit value is in place, there
513 // may not be a def-use connection between the loop and every instruction
514 // which got a SCEVAddRecExpr for that loop.
517 // Iterate over all of the values in all the PHI nodes.
518 for (unsigned i = 0; i != NumPreds; ++i) {
519 // If the value being merged in is not integer or is not defined
520 // in the loop, skip it.
521 Value *InVal = PN->getIncomingValue(i);
522 if (!isa<Instruction>(InVal))
525 // If this pred is for a subloop, not L itself, skip it.
526 if (LI->getLoopFor(PN->getIncomingBlock(i)) != L)
527 continue; // The Block is in a subloop, skip it.
529 // Check that InVal is defined in the loop.
530 Instruction *Inst = cast<Instruction>(InVal);
531 if (!L->contains(Inst))
534 // Okay, this instruction has a user outside of the current loop
535 // and varies predictably *inside* the loop. Evaluate the value it
536 // contains when the loop exits, if possible.
537 const SCEV *ExitValue = SE->getSCEVAtScope(Inst, L->getParentLoop());
538 if (!SE->isLoopInvariant(ExitValue, L) ||
539 !isSafeToExpand(ExitValue, *SE))
542 // Computing the value outside of the loop brings no benefit if :
543 // - it is definitely used inside the loop in a way which can not be
545 // - no use outside of the loop can take advantage of hoisting the
546 // computation out of the loop
547 if (ExitValue->getSCEVType()>=scMulExpr) {
548 unsigned NumHardInternalUses = 0;
549 unsigned NumSoftExternalUses = 0;
550 unsigned NumUses = 0;
551 for (Value::use_iterator IB=Inst->use_begin(), IE=Inst->use_end();
552 IB!=IE && NumUses<=6 ; ++IB) {
553 Instruction *UseInstr = cast<Instruction>(*IB);
554 unsigned Opc = UseInstr->getOpcode();
556 if (L->contains(UseInstr)) {
557 if (Opc == Instruction::Call || Opc == Instruction::Ret)
558 NumHardInternalUses++;
560 if (Opc == Instruction::PHI) {
561 // Do not count the Phi as a use. LCSSA may have inserted
562 // plenty of trivial ones.
564 for (Value::use_iterator PB=UseInstr->use_begin(),
565 PE=UseInstr->use_end();
566 PB!=PE && NumUses<=6 ; ++PB, ++NumUses) {
567 unsigned PhiOpc = cast<Instruction>(*PB)->getOpcode();
568 if (PhiOpc != Instruction::Call && PhiOpc != Instruction::Ret)
569 NumSoftExternalUses++;
573 if (Opc != Instruction::Call && Opc != Instruction::Ret)
574 NumSoftExternalUses++;
577 if (NumUses <= 6 && NumHardInternalUses && !NumSoftExternalUses)
581 Value *ExitVal = Rewriter.expandCodeFor(ExitValue, PN->getType(), Inst);
583 DEBUG(dbgs() << "INDVARS: RLEV: AfterLoopVal = " << *ExitVal << '\n'
584 << " LoopVal = " << *Inst << "\n");
586 if (!isValidRewrite(Inst, ExitVal)) {
587 DeadInsts.push_back(ExitVal);
593 PN->setIncomingValue(i, ExitVal);
595 // If this instruction is dead now, delete it. Don't do it now to avoid
596 // invalidating iterators.
597 if (isInstructionTriviallyDead(Inst, TLI))
598 DeadInsts.push_back(Inst);
601 // Completely replace a single-pred PHI. This is safe, because the
602 // NewVal won't be variant in the loop, so we don't need an LCSSA phi
604 PN->replaceAllUsesWith(ExitVal);
605 PN->eraseFromParent();
609 // Clone the PHI and delete the original one. This lets IVUsers and
610 // any other maps purge the original user from their records.
611 PHINode *NewPN = cast<PHINode>(PN->clone());
613 NewPN->insertBefore(PN);
614 PN->replaceAllUsesWith(NewPN);
615 PN->eraseFromParent();
620 // The insertion point instruction may have been deleted; clear it out
621 // so that the rewriter doesn't trip over it later.
622 Rewriter.clearInsertPoint();
625 //===----------------------------------------------------------------------===//
626 // IV Widening - Extend the width of an IV to cover its widest uses.
627 //===----------------------------------------------------------------------===//
630 // Collect information about induction variables that are used by sign/zero
631 // extend operations. This information is recorded by CollectExtend and
632 // provides the input to WidenIV.
635 Type *WidestNativeType; // Widest integer type created [sz]ext
636 bool IsSigned; // Was an sext user seen before a zext?
638 WideIVInfo() : NarrowIV(0), WidestNativeType(0), IsSigned(false) {}
641 class WideIVVisitor : public IVVisitor {
643 const DataLayout *TD;
648 WideIVVisitor(PHINode *NarrowIV, ScalarEvolution *SCEV,
649 const DataLayout *TData, const DominatorTree *DTree):
650 SE(SCEV), TD(TData) {
652 WI.NarrowIV = NarrowIV;
655 // Implement the interface used by simplifyUsersOfIV.
656 virtual void visitCast(CastInst *Cast);
660 /// visitCast - Update information about the induction variable that is
661 /// extended by this sign or zero extend operation. This is used to determine
662 /// the final width of the IV before actually widening it.
663 void WideIVVisitor::visitCast(CastInst *Cast) {
664 bool IsSigned = Cast->getOpcode() == Instruction::SExt;
665 if (!IsSigned && Cast->getOpcode() != Instruction::ZExt)
668 Type *Ty = Cast->getType();
669 uint64_t Width = SE->getTypeSizeInBits(Ty);
670 if (TD && !TD->isLegalInteger(Width))
673 if (!WI.WidestNativeType) {
674 WI.WidestNativeType = SE->getEffectiveSCEVType(Ty);
675 WI.IsSigned = IsSigned;
679 // We extend the IV to satisfy the sign of its first user, arbitrarily.
680 if (WI.IsSigned != IsSigned)
683 if (Width > SE->getTypeSizeInBits(WI.WidestNativeType))
684 WI.WidestNativeType = SE->getEffectiveSCEVType(Ty);
689 /// NarrowIVDefUse - Record a link in the Narrow IV def-use chain along with the
690 /// WideIV that computes the same value as the Narrow IV def. This avoids
691 /// caching Use* pointers.
692 struct NarrowIVDefUse {
693 Instruction *NarrowDef;
694 Instruction *NarrowUse;
695 Instruction *WideDef;
697 NarrowIVDefUse(): NarrowDef(0), NarrowUse(0), WideDef(0) {}
699 NarrowIVDefUse(Instruction *ND, Instruction *NU, Instruction *WD):
700 NarrowDef(ND), NarrowUse(NU), WideDef(WD) {}
703 /// WidenIV - The goal of this transform is to remove sign and zero extends
704 /// without creating any new induction variables. To do this, it creates a new
705 /// phi of the wider type and redirects all users, either removing extends or
706 /// inserting truncs whenever we stop propagating the type.
722 Instruction *WideInc;
723 const SCEV *WideIncExpr;
724 SmallVectorImpl<WeakVH> &DeadInsts;
726 SmallPtrSet<Instruction*,16> Widened;
727 SmallVector<NarrowIVDefUse, 8> NarrowIVUsers;
730 WidenIV(const WideIVInfo &WI, LoopInfo *LInfo,
731 ScalarEvolution *SEv, DominatorTree *DTree,
732 SmallVectorImpl<WeakVH> &DI) :
733 OrigPhi(WI.NarrowIV),
734 WideType(WI.WidestNativeType),
735 IsSigned(WI.IsSigned),
737 L(LI->getLoopFor(OrigPhi->getParent())),
744 assert(L->getHeader() == OrigPhi->getParent() && "Phi must be an IV");
747 PHINode *CreateWideIV(SCEVExpander &Rewriter);
750 Value *getExtend(Value *NarrowOper, Type *WideType, bool IsSigned,
753 Instruction *CloneIVUser(NarrowIVDefUse DU);
755 const SCEVAddRecExpr *GetWideRecurrence(Instruction *NarrowUse);
757 const SCEVAddRecExpr* GetExtendedOperandRecurrence(NarrowIVDefUse DU);
759 Instruction *WidenIVUse(NarrowIVDefUse DU, SCEVExpander &Rewriter);
761 void pushNarrowIVUsers(Instruction *NarrowDef, Instruction *WideDef);
763 } // anonymous namespace
765 /// isLoopInvariant - Perform a quick domtree based check for loop invariance
766 /// assuming that V is used within the loop. LoopInfo::isLoopInvariant() seems
767 /// gratuitous for this purpose.
768 static bool isLoopInvariant(Value *V, const Loop *L, const DominatorTree *DT) {
769 Instruction *Inst = dyn_cast<Instruction>(V);
773 return DT->properlyDominates(Inst->getParent(), L->getHeader());
776 Value *WidenIV::getExtend(Value *NarrowOper, Type *WideType, bool IsSigned,
778 // Set the debug location and conservative insertion point.
779 IRBuilder<> Builder(Use);
780 // Hoist the insertion point into loop preheaders as far as possible.
781 for (const Loop *L = LI->getLoopFor(Use->getParent());
782 L && L->getLoopPreheader() && isLoopInvariant(NarrowOper, L, DT);
783 L = L->getParentLoop())
784 Builder.SetInsertPoint(L->getLoopPreheader()->getTerminator());
786 return IsSigned ? Builder.CreateSExt(NarrowOper, WideType) :
787 Builder.CreateZExt(NarrowOper, WideType);
790 /// CloneIVUser - Instantiate a wide operation to replace a narrow
791 /// operation. This only needs to handle operations that can evaluation to
792 /// SCEVAddRec. It can safely return 0 for any operation we decide not to clone.
793 Instruction *WidenIV::CloneIVUser(NarrowIVDefUse DU) {
794 unsigned Opcode = DU.NarrowUse->getOpcode();
798 case Instruction::Add:
799 case Instruction::Mul:
800 case Instruction::UDiv:
801 case Instruction::Sub:
802 case Instruction::And:
803 case Instruction::Or:
804 case Instruction::Xor:
805 case Instruction::Shl:
806 case Instruction::LShr:
807 case Instruction::AShr:
808 DEBUG(dbgs() << "Cloning IVUser: " << *DU.NarrowUse << "\n");
810 // Replace NarrowDef operands with WideDef. Otherwise, we don't know
811 // anything about the narrow operand yet so must insert a [sz]ext. It is
812 // probably loop invariant and will be folded or hoisted. If it actually
813 // comes from a widened IV, it should be removed during a future call to
815 Value *LHS = (DU.NarrowUse->getOperand(0) == DU.NarrowDef) ? DU.WideDef :
816 getExtend(DU.NarrowUse->getOperand(0), WideType, IsSigned, DU.NarrowUse);
817 Value *RHS = (DU.NarrowUse->getOperand(1) == DU.NarrowDef) ? DU.WideDef :
818 getExtend(DU.NarrowUse->getOperand(1), WideType, IsSigned, DU.NarrowUse);
820 BinaryOperator *NarrowBO = cast<BinaryOperator>(DU.NarrowUse);
821 BinaryOperator *WideBO = BinaryOperator::Create(NarrowBO->getOpcode(),
823 NarrowBO->getName());
824 IRBuilder<> Builder(DU.NarrowUse);
825 Builder.Insert(WideBO);
826 if (const OverflowingBinaryOperator *OBO =
827 dyn_cast<OverflowingBinaryOperator>(NarrowBO)) {
828 if (OBO->hasNoUnsignedWrap()) WideBO->setHasNoUnsignedWrap();
829 if (OBO->hasNoSignedWrap()) WideBO->setHasNoSignedWrap();
835 /// No-wrap operations can transfer sign extension of their result to their
836 /// operands. Generate the SCEV value for the widened operation without
837 /// actually modifying the IR yet. If the expression after extending the
838 /// operands is an AddRec for this loop, return it.
839 const SCEVAddRecExpr* WidenIV::GetExtendedOperandRecurrence(NarrowIVDefUse DU) {
840 // Handle the common case of add<nsw/nuw>
841 if (DU.NarrowUse->getOpcode() != Instruction::Add)
844 // One operand (NarrowDef) has already been extended to WideDef. Now determine
845 // if extending the other will lead to a recurrence.
846 unsigned ExtendOperIdx = DU.NarrowUse->getOperand(0) == DU.NarrowDef ? 1 : 0;
847 assert(DU.NarrowUse->getOperand(1-ExtendOperIdx) == DU.NarrowDef && "bad DU");
849 const SCEV *ExtendOperExpr = 0;
850 const OverflowingBinaryOperator *OBO =
851 cast<OverflowingBinaryOperator>(DU.NarrowUse);
852 if (IsSigned && OBO->hasNoSignedWrap())
853 ExtendOperExpr = SE->getSignExtendExpr(
854 SE->getSCEV(DU.NarrowUse->getOperand(ExtendOperIdx)), WideType);
855 else if(!IsSigned && OBO->hasNoUnsignedWrap())
856 ExtendOperExpr = SE->getZeroExtendExpr(
857 SE->getSCEV(DU.NarrowUse->getOperand(ExtendOperIdx)), WideType);
861 // When creating this AddExpr, don't apply the current operations NSW or NUW
862 // flags. This instruction may be guarded by control flow that the no-wrap
863 // behavior depends on. Non-control-equivalent instructions can be mapped to
864 // the same SCEV expression, and it would be incorrect to transfer NSW/NUW
865 // semantics to those operations.
866 const SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(
867 SE->getAddExpr(SE->getSCEV(DU.WideDef), ExtendOperExpr));
869 if (!AddRec || AddRec->getLoop() != L)
874 /// GetWideRecurrence - Is this instruction potentially interesting from
875 /// IVUsers' perspective after widening it's type? In other words, can the
876 /// extend be safely hoisted out of the loop with SCEV reducing the value to a
877 /// recurrence on the same loop. If so, return the sign or zero extended
878 /// recurrence. Otherwise return NULL.
879 const SCEVAddRecExpr *WidenIV::GetWideRecurrence(Instruction *NarrowUse) {
880 if (!SE->isSCEVable(NarrowUse->getType()))
883 const SCEV *NarrowExpr = SE->getSCEV(NarrowUse);
884 if (SE->getTypeSizeInBits(NarrowExpr->getType())
885 >= SE->getTypeSizeInBits(WideType)) {
886 // NarrowUse implicitly widens its operand. e.g. a gep with a narrow
887 // index. So don't follow this use.
891 const SCEV *WideExpr = IsSigned ?
892 SE->getSignExtendExpr(NarrowExpr, WideType) :
893 SE->getZeroExtendExpr(NarrowExpr, WideType);
894 const SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(WideExpr);
895 if (!AddRec || AddRec->getLoop() != L)
900 /// This IV user cannot be widen. Replace this use of the original narrow IV
901 /// with a truncation of the new wide IV to isolate and eliminate the narrow IV.
902 static void truncateIVUse(NarrowIVDefUse DU, DominatorTree *DT) {
903 IRBuilder<> Builder(getInsertPointForUses(DU.NarrowUse, DU.NarrowDef, DT));
904 Value *Trunc = Builder.CreateTrunc(DU.WideDef, DU.NarrowDef->getType());
905 DU.NarrowUse->replaceUsesOfWith(DU.NarrowDef, Trunc);
908 /// WidenIVUse - Determine whether an individual user of the narrow IV can be
909 /// widened. If so, return the wide clone of the user.
910 Instruction *WidenIV::WidenIVUse(NarrowIVDefUse DU, SCEVExpander &Rewriter) {
912 // Stop traversing the def-use chain at inner-loop phis or post-loop phis.
913 if (isa<PHINode>(DU.NarrowUse) &&
914 LI->getLoopFor(DU.NarrowUse->getParent()) != L) {
915 truncateIVUse(DU, DT);
918 // Our raison d'etre! Eliminate sign and zero extension.
919 if (IsSigned ? isa<SExtInst>(DU.NarrowUse) : isa<ZExtInst>(DU.NarrowUse)) {
920 Value *NewDef = DU.WideDef;
921 if (DU.NarrowUse->getType() != WideType) {
922 unsigned CastWidth = SE->getTypeSizeInBits(DU.NarrowUse->getType());
923 unsigned IVWidth = SE->getTypeSizeInBits(WideType);
924 if (CastWidth < IVWidth) {
925 // The cast isn't as wide as the IV, so insert a Trunc.
926 IRBuilder<> Builder(DU.NarrowUse);
927 NewDef = Builder.CreateTrunc(DU.WideDef, DU.NarrowUse->getType());
930 // A wider extend was hidden behind a narrower one. This may induce
931 // another round of IV widening in which the intermediate IV becomes
932 // dead. It should be very rare.
933 DEBUG(dbgs() << "INDVARS: New IV " << *WidePhi
934 << " not wide enough to subsume " << *DU.NarrowUse << "\n");
935 DU.NarrowUse->replaceUsesOfWith(DU.NarrowDef, DU.WideDef);
936 NewDef = DU.NarrowUse;
939 if (NewDef != DU.NarrowUse) {
940 DEBUG(dbgs() << "INDVARS: eliminating " << *DU.NarrowUse
941 << " replaced by " << *DU.WideDef << "\n");
943 DU.NarrowUse->replaceAllUsesWith(NewDef);
944 DeadInsts.push_back(DU.NarrowUse);
946 // Now that the extend is gone, we want to expose it's uses for potential
947 // further simplification. We don't need to directly inform SimplifyIVUsers
948 // of the new users, because their parent IV will be processed later as a
949 // new loop phi. If we preserved IVUsers analysis, we would also want to
950 // push the uses of WideDef here.
952 // No further widening is needed. The deceased [sz]ext had done it for us.
956 // Does this user itself evaluate to a recurrence after widening?
957 const SCEVAddRecExpr *WideAddRec = GetWideRecurrence(DU.NarrowUse);
959 WideAddRec = GetExtendedOperandRecurrence(DU);
962 // This user does not evaluate to a recurence after widening, so don't
963 // follow it. Instead insert a Trunc to kill off the original use,
964 // eventually isolating the original narrow IV so it can be removed.
965 truncateIVUse(DU, DT);
968 // Assume block terminators cannot evaluate to a recurrence. We can't to
969 // insert a Trunc after a terminator if there happens to be a critical edge.
970 assert(DU.NarrowUse != DU.NarrowUse->getParent()->getTerminator() &&
971 "SCEV is not expected to evaluate a block terminator");
973 // Reuse the IV increment that SCEVExpander created as long as it dominates
975 Instruction *WideUse = 0;
976 if (WideAddRec == WideIncExpr
977 && Rewriter.hoistIVInc(WideInc, DU.NarrowUse))
980 WideUse = CloneIVUser(DU);
984 // Evaluation of WideAddRec ensured that the narrow expression could be
985 // extended outside the loop without overflow. This suggests that the wide use
986 // evaluates to the same expression as the extended narrow use, but doesn't
987 // absolutely guarantee it. Hence the following failsafe check. In rare cases
988 // where it fails, we simply throw away the newly created wide use.
989 if (WideAddRec != SE->getSCEV(WideUse)) {
990 DEBUG(dbgs() << "Wide use expression mismatch: " << *WideUse
991 << ": " << *SE->getSCEV(WideUse) << " != " << *WideAddRec << "\n");
992 DeadInsts.push_back(WideUse);
996 // Returning WideUse pushes it on the worklist.
1000 /// pushNarrowIVUsers - Add eligible users of NarrowDef to NarrowIVUsers.
1002 void WidenIV::pushNarrowIVUsers(Instruction *NarrowDef, Instruction *WideDef) {
1003 for (Value::use_iterator UI = NarrowDef->use_begin(),
1004 UE = NarrowDef->use_end(); UI != UE; ++UI) {
1005 Instruction *NarrowUse = cast<Instruction>(*UI);
1007 // Handle data flow merges and bizarre phi cycles.
1008 if (!Widened.insert(NarrowUse))
1011 NarrowIVUsers.push_back(NarrowIVDefUse(NarrowDef, NarrowUse, WideDef));
1015 /// CreateWideIV - Process a single induction variable. First use the
1016 /// SCEVExpander to create a wide induction variable that evaluates to the same
1017 /// recurrence as the original narrow IV. Then use a worklist to forward
1018 /// traverse the narrow IV's def-use chain. After WidenIVUse has processed all
1019 /// interesting IV users, the narrow IV will be isolated for removal by
1022 /// It would be simpler to delete uses as they are processed, but we must avoid
1023 /// invalidating SCEV expressions.
1025 PHINode *WidenIV::CreateWideIV(SCEVExpander &Rewriter) {
1026 // Is this phi an induction variable?
1027 const SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(SE->getSCEV(OrigPhi));
1031 // Widen the induction variable expression.
1032 const SCEV *WideIVExpr = IsSigned ?
1033 SE->getSignExtendExpr(AddRec, WideType) :
1034 SE->getZeroExtendExpr(AddRec, WideType);
1036 assert(SE->getEffectiveSCEVType(WideIVExpr->getType()) == WideType &&
1037 "Expect the new IV expression to preserve its type");
1039 // Can the IV be extended outside the loop without overflow?
1040 AddRec = dyn_cast<SCEVAddRecExpr>(WideIVExpr);
1041 if (!AddRec || AddRec->getLoop() != L)
1044 // An AddRec must have loop-invariant operands. Since this AddRec is
1045 // materialized by a loop header phi, the expression cannot have any post-loop
1046 // operands, so they must dominate the loop header.
1047 assert(SE->properlyDominates(AddRec->getStart(), L->getHeader()) &&
1048 SE->properlyDominates(AddRec->getStepRecurrence(*SE), L->getHeader())
1049 && "Loop header phi recurrence inputs do not dominate the loop");
1051 // The rewriter provides a value for the desired IV expression. This may
1052 // either find an existing phi or materialize a new one. Either way, we
1053 // expect a well-formed cyclic phi-with-increments. i.e. any operand not part
1054 // of the phi-SCC dominates the loop entry.
1055 Instruction *InsertPt = L->getHeader()->begin();
1056 WidePhi = cast<PHINode>(Rewriter.expandCodeFor(AddRec, WideType, InsertPt));
1058 // Remembering the WideIV increment generated by SCEVExpander allows
1059 // WidenIVUse to reuse it when widening the narrow IV's increment. We don't
1060 // employ a general reuse mechanism because the call above is the only call to
1061 // SCEVExpander. Henceforth, we produce 1-to-1 narrow to wide uses.
1062 if (BasicBlock *LatchBlock = L->getLoopLatch()) {
1064 cast<Instruction>(WidePhi->getIncomingValueForBlock(LatchBlock));
1065 WideIncExpr = SE->getSCEV(WideInc);
1068 DEBUG(dbgs() << "Wide IV: " << *WidePhi << "\n");
1071 // Traverse the def-use chain using a worklist starting at the original IV.
1072 assert(Widened.empty() && NarrowIVUsers.empty() && "expect initial state" );
1074 Widened.insert(OrigPhi);
1075 pushNarrowIVUsers(OrigPhi, WidePhi);
1077 while (!NarrowIVUsers.empty()) {
1078 NarrowIVDefUse DU = NarrowIVUsers.pop_back_val();
1080 // Process a def-use edge. This may replace the use, so don't hold a
1081 // use_iterator across it.
1082 Instruction *WideUse = WidenIVUse(DU, Rewriter);
1084 // Follow all def-use edges from the previous narrow use.
1086 pushNarrowIVUsers(DU.NarrowUse, WideUse);
1088 // WidenIVUse may have removed the def-use edge.
1089 if (DU.NarrowDef->use_empty())
1090 DeadInsts.push_back(DU.NarrowDef);
1095 //===----------------------------------------------------------------------===//
1096 // Simplification of IV users based on SCEV evaluation.
1097 //===----------------------------------------------------------------------===//
1100 /// SimplifyAndExtend - Iteratively perform simplification on a worklist of IV
1101 /// users. Each successive simplification may push more users which may
1102 /// themselves be candidates for simplification.
1104 /// Sign/Zero extend elimination is interleaved with IV simplification.
1106 void IndVarSimplify::SimplifyAndExtend(Loop *L,
1107 SCEVExpander &Rewriter,
1108 LPPassManager &LPM) {
1109 SmallVector<WideIVInfo, 8> WideIVs;
1111 SmallVector<PHINode*, 8> LoopPhis;
1112 for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ++I) {
1113 LoopPhis.push_back(cast<PHINode>(I));
1115 // Each round of simplification iterates through the SimplifyIVUsers worklist
1116 // for all current phis, then determines whether any IVs can be
1117 // widened. Widening adds new phis to LoopPhis, inducing another round of
1118 // simplification on the wide IVs.
1119 while (!LoopPhis.empty()) {
1120 // Evaluate as many IV expressions as possible before widening any IVs. This
1121 // forces SCEV to set no-wrap flags before evaluating sign/zero
1122 // extension. The first time SCEV attempts to normalize sign/zero extension,
1123 // the result becomes final. So for the most predictable results, we delay
1124 // evaluation of sign/zero extend evaluation until needed, and avoid running
1125 // other SCEV based analysis prior to SimplifyAndExtend.
1127 PHINode *CurrIV = LoopPhis.pop_back_val();
1129 // Information about sign/zero extensions of CurrIV.
1130 WideIVVisitor WIV(CurrIV, SE, TD, DT);
1132 WIV.setSplitOverflowIntrinsics();
1134 Changed |= simplifyUsersOfIV(CurrIV, SE, &LPM, DeadInsts, &WIV);
1136 if (WIV.WI.WidestNativeType) {
1137 WideIVs.push_back(WIV.WI);
1139 } while(!LoopPhis.empty());
1141 for (; !WideIVs.empty(); WideIVs.pop_back()) {
1142 WidenIV Widener(WideIVs.back(), LI, SE, DT, DeadInsts);
1143 if (PHINode *WidePhi = Widener.CreateWideIV(Rewriter)) {
1145 LoopPhis.push_back(WidePhi);
1151 //===----------------------------------------------------------------------===//
1152 // LinearFunctionTestReplace and its kin. Rewrite the loop exit condition.
1153 //===----------------------------------------------------------------------===//
1155 /// Check for expressions that ScalarEvolution generates to compute
1156 /// BackedgeTakenInfo. If these expressions have not been reduced, then
1157 /// expanding them may incur additional cost (albeit in the loop preheader).
1158 static bool isHighCostExpansion(const SCEV *S, BranchInst *BI,
1159 SmallPtrSet<const SCEV*, 8> &Processed,
1160 ScalarEvolution *SE) {
1161 if (!Processed.insert(S))
1164 // If the backedge-taken count is a UDiv, it's very likely a UDiv that
1165 // ScalarEvolution's HowFarToZero or HowManyLessThans produced to compute a
1166 // precise expression, rather than a UDiv from the user's code. If we can't
1167 // find a UDiv in the code with some simple searching, assume the former and
1168 // forego rewriting the loop.
1169 if (isa<SCEVUDivExpr>(S)) {
1170 ICmpInst *OrigCond = dyn_cast<ICmpInst>(BI->getCondition());
1171 if (!OrigCond) return true;
1172 const SCEV *R = SE->getSCEV(OrigCond->getOperand(1));
1173 R = SE->getMinusSCEV(R, SE->getConstant(R->getType(), 1));
1175 const SCEV *L = SE->getSCEV(OrigCond->getOperand(0));
1176 L = SE->getMinusSCEV(L, SE->getConstant(L->getType(), 1));
1182 // Recurse past add expressions, which commonly occur in the
1183 // BackedgeTakenCount. They may already exist in program code, and if not,
1184 // they are not too expensive rematerialize.
1185 if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
1186 for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
1188 if (isHighCostExpansion(*I, BI, Processed, SE))
1194 // HowManyLessThans uses a Max expression whenever the loop is not guarded by
1195 // the exit condition.
1196 if (isa<SCEVSMaxExpr>(S) || isa<SCEVUMaxExpr>(S))
1199 // If we haven't recognized an expensive SCEV pattern, assume it's an
1200 // expression produced by program code.
1204 /// canExpandBackedgeTakenCount - Return true if this loop's backedge taken
1205 /// count expression can be safely and cheaply expanded into an instruction
1206 /// sequence that can be used by LinearFunctionTestReplace.
1208 /// TODO: This fails for pointer-type loop counters with greater than one byte
1209 /// strides, consequently preventing LFTR from running. For the purpose of LFTR
1210 /// we could skip this check in the case that the LFTR loop counter (chosen by
1211 /// FindLoopCounter) is also pointer type. Instead, we could directly convert
1212 /// the loop test to an inequality test by checking the target data's alignment
1213 /// of element types (given that the initial pointer value originates from or is
1214 /// used by ABI constrained operation, as opposed to inttoptr/ptrtoint).
1215 /// However, we don't yet have a strong motivation for converting loop tests
1216 /// into inequality tests.
1217 static bool canExpandBackedgeTakenCount(Loop *L, ScalarEvolution *SE) {
1218 const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
1219 if (isa<SCEVCouldNotCompute>(BackedgeTakenCount) ||
1220 BackedgeTakenCount->isZero())
1223 if (!L->getExitingBlock())
1226 // Can't rewrite non-branch yet.
1227 BranchInst *BI = dyn_cast<BranchInst>(L->getExitingBlock()->getTerminator());
1231 SmallPtrSet<const SCEV*, 8> Processed;
1232 if (isHighCostExpansion(BackedgeTakenCount, BI, Processed, SE))
1238 /// getLoopPhiForCounter - Return the loop header phi IFF IncV adds a loop
1239 /// invariant value to the phi.
1240 static PHINode *getLoopPhiForCounter(Value *IncV, Loop *L, DominatorTree *DT) {
1241 Instruction *IncI = dyn_cast<Instruction>(IncV);
1245 switch (IncI->getOpcode()) {
1246 case Instruction::Add:
1247 case Instruction::Sub:
1249 case Instruction::GetElementPtr:
1250 // An IV counter must preserve its type.
1251 if (IncI->getNumOperands() == 2)
1257 PHINode *Phi = dyn_cast<PHINode>(IncI->getOperand(0));
1258 if (Phi && Phi->getParent() == L->getHeader()) {
1259 if (isLoopInvariant(IncI->getOperand(1), L, DT))
1263 if (IncI->getOpcode() == Instruction::GetElementPtr)
1266 // Allow add/sub to be commuted.
1267 Phi = dyn_cast<PHINode>(IncI->getOperand(1));
1268 if (Phi && Phi->getParent() == L->getHeader()) {
1269 if (isLoopInvariant(IncI->getOperand(0), L, DT))
1275 /// Return the compare guarding the loop latch, or NULL for unrecognized tests.
1276 static ICmpInst *getLoopTest(Loop *L) {
1277 assert(L->getExitingBlock() && "expected loop exit");
1279 BasicBlock *LatchBlock = L->getLoopLatch();
1280 // Don't bother with LFTR if the loop is not properly simplified.
1284 BranchInst *BI = dyn_cast<BranchInst>(L->getExitingBlock()->getTerminator());
1285 assert(BI && "expected exit branch");
1287 return dyn_cast<ICmpInst>(BI->getCondition());
1290 /// needsLFTR - LinearFunctionTestReplace policy. Return true unless we can show
1291 /// that the current exit test is already sufficiently canonical.
1292 static bool needsLFTR(Loop *L, DominatorTree *DT) {
1293 // Do LFTR to simplify the exit condition to an ICMP.
1294 ICmpInst *Cond = getLoopTest(L);
1298 // Do LFTR to simplify the exit ICMP to EQ/NE
1299 ICmpInst::Predicate Pred = Cond->getPredicate();
1300 if (Pred != ICmpInst::ICMP_NE && Pred != ICmpInst::ICMP_EQ)
1303 // Look for a loop invariant RHS
1304 Value *LHS = Cond->getOperand(0);
1305 Value *RHS = Cond->getOperand(1);
1306 if (!isLoopInvariant(RHS, L, DT)) {
1307 if (!isLoopInvariant(LHS, L, DT))
1309 std::swap(LHS, RHS);
1311 // Look for a simple IV counter LHS
1312 PHINode *Phi = dyn_cast<PHINode>(LHS);
1314 Phi = getLoopPhiForCounter(LHS, L, DT);
1319 // Do LFTR if PHI node is defined in the loop, but is *not* a counter.
1320 int Idx = Phi->getBasicBlockIndex(L->getLoopLatch());
1324 // Do LFTR if the exit condition's IV is *not* a simple counter.
1325 Value *IncV = Phi->getIncomingValue(Idx);
1326 return Phi != getLoopPhiForCounter(IncV, L, DT);
1329 /// Recursive helper for hasConcreteDef(). Unfortunately, this currently boils
1330 /// down to checking that all operands are constant and listing instructions
1331 /// that may hide undef.
1332 static bool hasConcreteDefImpl(Value *V, SmallPtrSet<Value*, 8> &Visited,
1334 if (isa<Constant>(V))
1335 return !isa<UndefValue>(V);
1340 // Conservatively handle non-constant non-instructions. For example, Arguments
1342 Instruction *I = dyn_cast<Instruction>(V);
1346 // Load and return values may be undef.
1347 if(I->mayReadFromMemory() || isa<CallInst>(I) || isa<InvokeInst>(I))
1350 // Optimistically handle other instructions.
1351 for (User::op_iterator OI = I->op_begin(), E = I->op_end(); OI != E; ++OI) {
1352 if (!Visited.insert(*OI))
1354 if (!hasConcreteDefImpl(*OI, Visited, Depth+1))
1360 /// Return true if the given value is concrete. We must prove that undef can
1363 /// TODO: If we decide that this is a good approach to checking for undef, we
1364 /// may factor it into a common location.
1365 static bool hasConcreteDef(Value *V) {
1366 SmallPtrSet<Value*, 8> Visited;
1368 return hasConcreteDefImpl(V, Visited, 0);
1371 /// AlmostDeadIV - Return true if this IV has any uses other than the (soon to
1372 /// be rewritten) loop exit test.
1373 static bool AlmostDeadIV(PHINode *Phi, BasicBlock *LatchBlock, Value *Cond) {
1374 int LatchIdx = Phi->getBasicBlockIndex(LatchBlock);
1375 Value *IncV = Phi->getIncomingValue(LatchIdx);
1377 for (Value::use_iterator UI = Phi->use_begin(), UE = Phi->use_end();
1379 if (*UI != Cond && *UI != IncV) return false;
1382 for (Value::use_iterator UI = IncV->use_begin(), UE = IncV->use_end();
1384 if (*UI != Cond && *UI != Phi) return false;
1389 /// FindLoopCounter - Find an affine IV in canonical form.
1391 /// BECount may be an i8* pointer type. The pointer difference is already
1392 /// valid count without scaling the address stride, so it remains a pointer
1393 /// expression as far as SCEV is concerned.
1395 /// Currently only valid for LFTR. See the comments on hasConcreteDef below.
1397 /// FIXME: Accept -1 stride and set IVLimit = IVInit - BECount
1399 /// FIXME: Accept non-unit stride as long as SCEV can reduce BECount * Stride.
1400 /// This is difficult in general for SCEV because of potential overflow. But we
1401 /// could at least handle constant BECounts.
1403 FindLoopCounter(Loop *L, const SCEV *BECount,
1404 ScalarEvolution *SE, DominatorTree *DT, const DataLayout *TD) {
1405 uint64_t BCWidth = SE->getTypeSizeInBits(BECount->getType());
1408 cast<BranchInst>(L->getExitingBlock()->getTerminator())->getCondition();
1410 // Loop over all of the PHI nodes, looking for a simple counter.
1411 PHINode *BestPhi = 0;
1412 const SCEV *BestInit = 0;
1413 BasicBlock *LatchBlock = L->getLoopLatch();
1414 assert(LatchBlock && "needsLFTR should guarantee a loop latch");
1416 for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ++I) {
1417 PHINode *Phi = cast<PHINode>(I);
1418 if (!SE->isSCEVable(Phi->getType()))
1421 // Avoid comparing an integer IV against a pointer Limit.
1422 if (BECount->getType()->isPointerTy() && !Phi->getType()->isPointerTy())
1425 const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(SE->getSCEV(Phi));
1426 if (!AR || AR->getLoop() != L || !AR->isAffine())
1429 // AR may be a pointer type, while BECount is an integer type.
1430 // AR may be wider than BECount. With eq/ne tests overflow is immaterial.
1431 // AR may not be a narrower type, or we may never exit.
1432 uint64_t PhiWidth = SE->getTypeSizeInBits(AR->getType());
1433 if (PhiWidth < BCWidth || (TD && !TD->isLegalInteger(PhiWidth)))
1436 const SCEV *Step = dyn_cast<SCEVConstant>(AR->getStepRecurrence(*SE));
1437 if (!Step || !Step->isOne())
1440 int LatchIdx = Phi->getBasicBlockIndex(LatchBlock);
1441 Value *IncV = Phi->getIncomingValue(LatchIdx);
1442 if (getLoopPhiForCounter(IncV, L, DT) != Phi)
1445 // Avoid reusing a potentially undef value to compute other values that may
1446 // have originally had a concrete definition.
1447 if (!hasConcreteDef(Phi)) {
1448 // We explicitly allow unknown phis as long as they are already used by
1449 // the loop test. In this case we assume that performing LFTR could not
1450 // increase the number of undef users.
1451 if (ICmpInst *Cond = getLoopTest(L)) {
1452 if (Phi != getLoopPhiForCounter(Cond->getOperand(0), L, DT)
1453 && Phi != getLoopPhiForCounter(Cond->getOperand(1), L, DT)) {
1458 const SCEV *Init = AR->getStart();
1460 if (BestPhi && !AlmostDeadIV(BestPhi, LatchBlock, Cond)) {
1461 // Don't force a live loop counter if another IV can be used.
1462 if (AlmostDeadIV(Phi, LatchBlock, Cond))
1465 // Prefer to count-from-zero. This is a more "canonical" counter form. It
1466 // also prefers integer to pointer IVs.
1467 if (BestInit->isZero() != Init->isZero()) {
1468 if (BestInit->isZero())
1471 // If two IVs both count from zero or both count from nonzero then the
1472 // narrower is likely a dead phi that has been widened. Use the wider phi
1473 // to allow the other to be eliminated.
1474 else if (PhiWidth <= SE->getTypeSizeInBits(BestPhi->getType()))
1483 /// genLoopLimit - Help LinearFunctionTestReplace by generating a value that
1484 /// holds the RHS of the new loop test.
1485 static Value *genLoopLimit(PHINode *IndVar, const SCEV *IVCount, Loop *L,
1486 SCEVExpander &Rewriter, ScalarEvolution *SE) {
1487 const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(SE->getSCEV(IndVar));
1488 assert(AR && AR->getLoop() == L && AR->isAffine() && "bad loop counter");
1489 const SCEV *IVInit = AR->getStart();
1491 // IVInit may be a pointer while IVCount is an integer when FindLoopCounter
1492 // finds a valid pointer IV. Sign extend BECount in order to materialize a
1493 // GEP. Avoid running SCEVExpander on a new pointer value, instead reusing
1494 // the existing GEPs whenever possible.
1495 if (IndVar->getType()->isPointerTy()
1496 && !IVCount->getType()->isPointerTy()) {
1498 // IVOffset will be the new GEP offset that is interpreted by GEP as a
1499 // signed value. IVCount on the other hand represents the loop trip count,
1500 // which is an unsigned value. FindLoopCounter only allows induction
1501 // variables that have a positive unit stride of one. This means we don't
1502 // have to handle the case of negative offsets (yet) and just need to zero
1504 Type *OfsTy = SE->getEffectiveSCEVType(IVInit->getType());
1505 const SCEV *IVOffset = SE->getTruncateOrZeroExtend(IVCount, OfsTy);
1507 // Expand the code for the iteration count.
1508 assert(SE->isLoopInvariant(IVOffset, L) &&
1509 "Computed iteration count is not loop invariant!");
1510 BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
1511 Value *GEPOffset = Rewriter.expandCodeFor(IVOffset, OfsTy, BI);
1513 Value *GEPBase = IndVar->getIncomingValueForBlock(L->getLoopPreheader());
1514 assert(AR->getStart() == SE->getSCEV(GEPBase) && "bad loop counter");
1515 // We could handle pointer IVs other than i8*, but we need to compensate for
1516 // gep index scaling. See canExpandBackedgeTakenCount comments.
1517 assert(SE->getSizeOfExpr(IntegerType::getInt64Ty(IndVar->getContext()),
1518 cast<PointerType>(GEPBase->getType())->getElementType())->isOne()
1519 && "unit stride pointer IV must be i8*");
1521 IRBuilder<> Builder(L->getLoopPreheader()->getTerminator());
1522 return Builder.CreateGEP(GEPBase, GEPOffset, "lftr.limit");
1525 // In any other case, convert both IVInit and IVCount to integers before
1526 // comparing. This may result in SCEV expension of pointers, but in practice
1527 // SCEV will fold the pointer arithmetic away as such:
1528 // BECount = (IVEnd - IVInit - 1) => IVLimit = IVInit (postinc).
1530 // Valid Cases: (1) both integers is most common; (2) both may be pointers
1531 // for simple memset-style loops.
1533 // IVInit integer and IVCount pointer would only occur if a canonical IV
1534 // were generated on top of case #2, which is not expected.
1536 const SCEV *IVLimit = 0;
1537 // For unit stride, IVCount = Start + BECount with 2's complement overflow.
1538 // For non-zero Start, compute IVCount here.
1539 if (AR->getStart()->isZero())
1542 assert(AR->getStepRecurrence(*SE)->isOne() && "only handles unit stride");
1543 const SCEV *IVInit = AR->getStart();
1545 // For integer IVs, truncate the IV before computing IVInit + BECount.
1546 if (SE->getTypeSizeInBits(IVInit->getType())
1547 > SE->getTypeSizeInBits(IVCount->getType()))
1548 IVInit = SE->getTruncateExpr(IVInit, IVCount->getType());
1550 IVLimit = SE->getAddExpr(IVInit, IVCount);
1552 // Expand the code for the iteration count.
1553 BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
1554 IRBuilder<> Builder(BI);
1555 assert(SE->isLoopInvariant(IVLimit, L) &&
1556 "Computed iteration count is not loop invariant!");
1557 // Ensure that we generate the same type as IndVar, or a smaller integer
1558 // type. In the presence of null pointer values, we have an integer type
1559 // SCEV expression (IVInit) for a pointer type IV value (IndVar).
1560 Type *LimitTy = IVCount->getType()->isPointerTy() ?
1561 IndVar->getType() : IVCount->getType();
1562 return Rewriter.expandCodeFor(IVLimit, LimitTy, BI);
1566 /// LinearFunctionTestReplace - This method rewrites the exit condition of the
1567 /// loop to be a canonical != comparison against the incremented loop induction
1568 /// variable. This pass is able to rewrite the exit tests of any loop where the
1569 /// SCEV analysis can determine a loop-invariant trip count of the loop, which
1570 /// is actually a much broader range than just linear tests.
1571 Value *IndVarSimplify::
1572 LinearFunctionTestReplace(Loop *L,
1573 const SCEV *BackedgeTakenCount,
1575 SCEVExpander &Rewriter) {
1576 assert(canExpandBackedgeTakenCount(L, SE) && "precondition");
1578 // Initialize CmpIndVar and IVCount to their preincremented values.
1579 Value *CmpIndVar = IndVar;
1580 const SCEV *IVCount = BackedgeTakenCount;
1582 // If the exiting block is the same as the backedge block, we prefer to
1583 // compare against the post-incremented value, otherwise we must compare
1584 // against the preincremented value.
1585 if (L->getExitingBlock() == L->getLoopLatch()) {
1586 // Add one to the "backedge-taken" count to get the trip count.
1587 // This addition may overflow, which is valid as long as the comparison is
1588 // truncated to BackedgeTakenCount->getType().
1589 IVCount = SE->getAddExpr(BackedgeTakenCount,
1590 SE->getConstant(BackedgeTakenCount->getType(), 1));
1591 // The BackedgeTaken expression contains the number of times that the
1592 // backedge branches to the loop header. This is one less than the
1593 // number of times the loop executes, so use the incremented indvar.
1594 CmpIndVar = IndVar->getIncomingValueForBlock(L->getExitingBlock());
1597 Value *ExitCnt = genLoopLimit(IndVar, IVCount, L, Rewriter, SE);
1598 assert(ExitCnt->getType()->isPointerTy() == IndVar->getType()->isPointerTy()
1599 && "genLoopLimit missed a cast");
1601 // Insert a new icmp_ne or icmp_eq instruction before the branch.
1602 BranchInst *BI = cast<BranchInst>(L->getExitingBlock()->getTerminator());
1603 ICmpInst::Predicate P;
1604 if (L->contains(BI->getSuccessor(0)))
1605 P = ICmpInst::ICMP_NE;
1607 P = ICmpInst::ICMP_EQ;
1609 DEBUG(dbgs() << "INDVARS: Rewriting loop exit condition to:\n"
1610 << " LHS:" << *CmpIndVar << '\n'
1612 << (P == ICmpInst::ICMP_NE ? "!=" : "==") << "\n"
1613 << " RHS:\t" << *ExitCnt << "\n"
1614 << " IVCount:\t" << *IVCount << "\n");
1616 IRBuilder<> Builder(BI);
1618 // LFTR can ignore IV overflow and truncate to the width of
1619 // BECount. This avoids materializing the add(zext(add)) expression.
1620 unsigned CmpIndVarSize = SE->getTypeSizeInBits(CmpIndVar->getType());
1621 unsigned ExitCntSize = SE->getTypeSizeInBits(ExitCnt->getType());
1622 if (CmpIndVarSize > ExitCntSize) {
1623 const SCEVAddRecExpr *AR = cast<SCEVAddRecExpr>(SE->getSCEV(IndVar));
1624 const SCEV *ARStart = AR->getStart();
1625 const SCEV *ARStep = AR->getStepRecurrence(*SE);
1626 // For constant IVCount, avoid truncation.
1627 if (isa<SCEVConstant>(ARStart) && isa<SCEVConstant>(IVCount)) {
1628 const APInt &Start = cast<SCEVConstant>(ARStart)->getValue()->getValue();
1629 APInt Count = cast<SCEVConstant>(IVCount)->getValue()->getValue();
1630 // Note that the post-inc value of BackedgeTakenCount may have overflowed
1631 // above such that IVCount is now zero.
1632 if (IVCount != BackedgeTakenCount && Count == 0) {
1633 Count = APInt::getMaxValue(Count.getBitWidth()).zext(CmpIndVarSize);
1637 Count = Count.zext(CmpIndVarSize);
1639 if (cast<SCEVConstant>(ARStep)->getValue()->isNegative())
1640 NewLimit = Start - Count;
1642 NewLimit = Start + Count;
1643 ExitCnt = ConstantInt::get(CmpIndVar->getType(), NewLimit);
1645 DEBUG(dbgs() << " Widen RHS:\t" << *ExitCnt << "\n");
1647 CmpIndVar = Builder.CreateTrunc(CmpIndVar, ExitCnt->getType(),
1651 Value *Cond = Builder.CreateICmp(P, CmpIndVar, ExitCnt, "exitcond");
1652 Value *OrigCond = BI->getCondition();
1653 // It's tempting to use replaceAllUsesWith here to fully replace the old
1654 // comparison, but that's not immediately safe, since users of the old
1655 // comparison may not be dominated by the new comparison. Instead, just
1656 // update the branch to use the new comparison; in the common case this
1657 // will make old comparison dead.
1658 BI->setCondition(Cond);
1659 DeadInsts.push_back(OrigCond);
1666 //===----------------------------------------------------------------------===//
1667 // SinkUnusedInvariants. A late subpass to cleanup loop preheaders.
1668 //===----------------------------------------------------------------------===//
1670 /// If there's a single exit block, sink any loop-invariant values that
1671 /// were defined in the preheader but not used inside the loop into the
1672 /// exit block to reduce register pressure in the loop.
1673 void IndVarSimplify::SinkUnusedInvariants(Loop *L) {
1674 BasicBlock *ExitBlock = L->getExitBlock();
1675 if (!ExitBlock) return;
1677 BasicBlock *Preheader = L->getLoopPreheader();
1678 if (!Preheader) return;
1680 Instruction *InsertPt = ExitBlock->getFirstInsertionPt();
1681 BasicBlock::iterator I = Preheader->getTerminator();
1682 while (I != Preheader->begin()) {
1684 // New instructions were inserted at the end of the preheader.
1685 if (isa<PHINode>(I))
1688 // Don't move instructions which might have side effects, since the side
1689 // effects need to complete before instructions inside the loop. Also don't
1690 // move instructions which might read memory, since the loop may modify
1691 // memory. Note that it's okay if the instruction might have undefined
1692 // behavior: LoopSimplify guarantees that the preheader dominates the exit
1694 if (I->mayHaveSideEffects() || I->mayReadFromMemory())
1697 // Skip debug info intrinsics.
1698 if (isa<DbgInfoIntrinsic>(I))
1701 // Skip landingpad instructions.
1702 if (isa<LandingPadInst>(I))
1705 // Don't sink alloca: we never want to sink static alloca's out of the
1706 // entry block, and correctly sinking dynamic alloca's requires
1707 // checks for stacksave/stackrestore intrinsics.
1708 // FIXME: Refactor this check somehow?
1709 if (isa<AllocaInst>(I))
1712 // Determine if there is a use in or before the loop (direct or
1714 bool UsedInLoop = false;
1715 for (Value::use_iterator UI = I->use_begin(), UE = I->use_end();
1718 BasicBlock *UseBB = cast<Instruction>(U)->getParent();
1719 if (PHINode *P = dyn_cast<PHINode>(U)) {
1721 PHINode::getIncomingValueNumForOperand(UI.getOperandNo());
1722 UseBB = P->getIncomingBlock(i);
1724 if (UseBB == Preheader || L->contains(UseBB)) {
1730 // If there is, the def must remain in the preheader.
1734 // Otherwise, sink it to the exit block.
1735 Instruction *ToMove = I;
1738 if (I != Preheader->begin()) {
1739 // Skip debug info intrinsics.
1742 } while (isa<DbgInfoIntrinsic>(I) && I != Preheader->begin());
1744 if (isa<DbgInfoIntrinsic>(I) && I == Preheader->begin())
1750 ToMove->moveBefore(InsertPt);
1756 //===----------------------------------------------------------------------===//
1757 // IndVarSimplify driver. Manage several subpasses of IV simplification.
1758 //===----------------------------------------------------------------------===//
1760 bool IndVarSimplify::runOnLoop(Loop *L, LPPassManager &LPM) {
1761 // If LoopSimplify form is not available, stay out of trouble. Some notes:
1762 // - LSR currently only supports LoopSimplify-form loops. Indvars'
1763 // canonicalization can be a pessimization without LSR to "clean up"
1765 // - We depend on having a preheader; in particular,
1766 // Loop::getCanonicalInductionVariable only supports loops with preheaders,
1767 // and we're in trouble if we can't find the induction variable even when
1768 // we've manually inserted one.
1769 if (!L->isLoopSimplifyForm())
1772 LI = &getAnalysis<LoopInfo>();
1773 SE = &getAnalysis<ScalarEvolution>();
1774 DT = &getAnalysis<DominatorTree>();
1775 TD = getAnalysisIfAvailable<DataLayout>();
1776 TLI = getAnalysisIfAvailable<TargetLibraryInfo>();
1781 // If there are any floating-point recurrences, attempt to
1782 // transform them to use integer recurrences.
1783 RewriteNonIntegerIVs(L);
1785 const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
1787 // Create a rewriter object which we'll use to transform the code with.
1788 SCEVExpander Rewriter(*SE, "indvars");
1790 Rewriter.setDebugType(DEBUG_TYPE);
1793 // Eliminate redundant IV users.
1795 // Simplification works best when run before other consumers of SCEV. We
1796 // attempt to avoid evaluating SCEVs for sign/zero extend operations until
1797 // other expressions involving loop IVs have been evaluated. This helps SCEV
1798 // set no-wrap flags before normalizing sign/zero extension.
1799 Rewriter.disableCanonicalMode();
1800 SimplifyAndExtend(L, Rewriter, LPM);
1802 // Check to see if this loop has a computable loop-invariant execution count.
1803 // If so, this means that we can compute the final value of any expressions
1804 // that are recurrent in the loop, and substitute the exit values from the
1805 // loop into any instructions outside of the loop that use the final values of
1806 // the current expressions.
1808 if (!isa<SCEVCouldNotCompute>(BackedgeTakenCount))
1809 RewriteLoopExitValues(L, Rewriter);
1811 // Eliminate redundant IV cycles.
1812 NumElimIV += Rewriter.replaceCongruentIVs(L, DT, DeadInsts);
1814 // If we have a trip count expression, rewrite the loop's exit condition
1815 // using it. We can currently only handle loops with a single exit.
1816 if (canExpandBackedgeTakenCount(L, SE) && needsLFTR(L, DT)) {
1817 PHINode *IndVar = FindLoopCounter(L, BackedgeTakenCount, SE, DT, TD);
1819 // Check preconditions for proper SCEVExpander operation. SCEV does not
1820 // express SCEVExpander's dependencies, such as LoopSimplify. Instead any
1821 // pass that uses the SCEVExpander must do it. This does not work well for
1822 // loop passes because SCEVExpander makes assumptions about all loops, while
1823 // LoopPassManager only forces the current loop to be simplified.
1825 // FIXME: SCEV expansion has no way to bail out, so the caller must
1826 // explicitly check any assumptions made by SCEV. Brittle.
1827 const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(BackedgeTakenCount);
1828 if (!AR || AR->getLoop()->getLoopPreheader())
1829 (void)LinearFunctionTestReplace(L, BackedgeTakenCount, IndVar,
1833 // Clear the rewriter cache, because values that are in the rewriter's cache
1834 // can be deleted in the loop below, causing the AssertingVH in the cache to
1838 // Now that we're done iterating through lists, clean up any instructions
1839 // which are now dead.
1840 while (!DeadInsts.empty())
1841 if (Instruction *Inst =
1842 dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val()))
1843 RecursivelyDeleteTriviallyDeadInstructions(Inst, TLI);
1845 // The Rewriter may not be used from this point on.
1847 // Loop-invariant instructions in the preheader that aren't used in the
1848 // loop may be sunk below the loop to reduce register pressure.
1849 SinkUnusedInvariants(L);
1851 // Clean up dead instructions.
1852 Changed |= DeleteDeadPHIs(L->getHeader(), TLI);
1853 // Check a post-condition.
1854 assert(L->isLCSSAForm(*DT) &&
1855 "Indvars did not leave the loop in lcssa form!");
1857 // Verify that LFTR, and any other change have not interfered with SCEV's
1858 // ability to compute trip count.
1860 if (VerifyIndvars && !isa<SCEVCouldNotCompute>(BackedgeTakenCount)) {
1862 const SCEV *NewBECount = SE->getBackedgeTakenCount(L);
1863 if (SE->getTypeSizeInBits(BackedgeTakenCount->getType()) <
1864 SE->getTypeSizeInBits(NewBECount->getType()))
1865 NewBECount = SE->getTruncateOrNoop(NewBECount,
1866 BackedgeTakenCount->getType());
1868 BackedgeTakenCount = SE->getTruncateOrNoop(BackedgeTakenCount,
1869 NewBECount->getType());
1870 assert(BackedgeTakenCount == NewBECount && "indvars must preserve SCEV");