1 //===- MipsInstrInfo.td - Mips Register defs --------------------*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 //===----------------------------------------------------------------------===//
11 // Instruction format superclass
12 //===----------------------------------------------------------------------===//
14 include "MipsInstrFormats.td"
16 //===----------------------------------------------------------------------===//
17 // Mips profiles and nodes
18 //===----------------------------------------------------------------------===//
20 def SDT_MipsRet : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
21 def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>;
22 def SDT_MipsSelectCC : SDTypeProfile<1, 3, [SDTCisSameAs<0, 2>,
23 SDTCisSameAs<2, 3>, SDTCisInt<1>]>;
24 def SDT_MipsCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i32>]>;
25 def SDT_MipsCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i32>, SDTCisVT<1, i32>]>;
28 def MipsJmpLink : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink, [SDNPHasChain,
31 // Hi and Lo nodes are used to handle global addresses. Used on
32 // MipsISelLowering to lower stuff like GlobalAddress, ExternalSymbol
33 // static model. (nothing to do with Mips Registers Hi and Lo)
34 def MipsHi : SDNode<"MipsISD::Hi", SDTIntUnaryOp>;
35 def MipsLo : SDNode<"MipsISD::Lo", SDTIntUnaryOp>;
36 def MipsGPRel : SDNode<"MipsISD::GPRel", SDTIntUnaryOp>;
39 def MipsRet : SDNode<"MipsISD::Ret", SDT_MipsRet, [SDNPHasChain,
42 // These are target-independent nodes, but have target-specific formats.
43 def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeqStart,
44 [SDNPHasChain, SDNPOutFlag]>;
45 def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeqEnd,
46 [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;
48 // Select Condition Code
49 def MipsSelectCC : SDNode<"MipsISD::SelectCC", SDT_MipsSelectCC>;
51 //===----------------------------------------------------------------------===//
52 // Mips Instruction Predicate Definitions.
53 //===----------------------------------------------------------------------===//
54 def HasSEInReg : Predicate<"Subtarget.hasSEInReg()">;
56 //===----------------------------------------------------------------------===//
57 // Mips Operand, Complex Patterns and Transformations Definitions.
58 //===----------------------------------------------------------------------===//
60 // Instruction operand types
61 def brtarget : Operand<OtherVT>;
62 def calltarget : Operand<i32>;
63 def uimm16 : Operand<i32>;
64 def simm16 : Operand<i32>;
65 def shamt : Operand<i32>;
68 def mem : Operand<i32> {
69 let PrintMethod = "printMemOperand";
70 let MIOperandInfo = (ops simm16, CPURegs);
73 // Transformation Function - get the lower 16 bits.
74 def LO16 : SDNodeXForm<imm, [{
75 return getI32Imm((unsigned)N->getValue() & 0xFFFF);
78 // Transformation Function - get the higher 16 bits.
79 def HI16 : SDNodeXForm<imm, [{
80 return getI32Imm((unsigned)N->getValue() >> 16);
83 // Node immediate fits as 16-bit sign extended on target immediate.
85 def immSExt16 : PatLeaf<(imm), [{
86 if (N->getValueType(0) == MVT::i32)
87 return (int32_t)N->getValue() == (short)N->getValue();
89 return (int64_t)N->getValue() == (short)N->getValue();
92 // Node immediate fits as 16-bit zero extended on target immediate.
93 // The LO16 param means that only the lower 16 bits of the node
94 // immediate are caught.
96 def immZExt16 : PatLeaf<(imm), [{
97 if (N->getValueType(0) == MVT::i32)
98 return (uint32_t)N->getValue() == (unsigned short)N->getValue();
100 return (uint64_t)N->getValue() == (unsigned short)N->getValue();
103 // shamt field must fit in 5 bits.
104 def immZExt5 : PatLeaf<(imm), [{
105 return N->getValue() == ((N->getValue()) & 0x1f) ;
108 // Mips Address Mode! SDNode frameindex could possibily be a match
109 // since load and store instructions from stack used it.
110 def addr : ComplexPattern<i32, 2, "SelectAddr", [frameindex], []>;
112 //===----------------------------------------------------------------------===//
113 // Instructions specific format
114 //===----------------------------------------------------------------------===//
116 // Arithmetic 3 register operands
117 let isCommutable = 1 in
118 class ArithR<bits<6> op, bits<6> func, string instr_asm, SDNode OpNode,
119 InstrItinClass itin>:
123 (ins CPURegs:$b, CPURegs:$c),
124 !strconcat(instr_asm, "\t$dst, $b, $c"),
125 [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], itin>;
127 let isCommutable = 1 in
128 class ArithOverflowR<bits<6> op, bits<6> func, string instr_asm>:
132 (ins CPURegs:$b, CPURegs:$c),
133 !strconcat(instr_asm, "\t$dst, $b, $c"),
136 // Arithmetic 2 register operands
137 class ArithI<bits<6> op, string instr_asm, SDNode OpNode,
138 Operand Od, PatLeaf imm_type> :
141 (ins CPURegs:$b, Od:$c),
142 !strconcat(instr_asm, "\t$dst, $b, $c"),
143 [(set CPURegs:$dst, (OpNode CPURegs:$b, imm_type:$c))], IIAlu>;
145 // Arithmetic Multiply ADD/SUB
147 class MArithR<bits<6> func, string instr_asm> :
152 !strconcat(instr_asm, "\t$rs, $rt"),
156 class LogicR<bits<6> func, string instr_asm, SDNode OpNode>:
160 (ins CPURegs:$b, CPURegs:$c),
161 !strconcat(instr_asm, "\t$dst, $b, $c"),
162 [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
164 class LogicI<bits<6> op, string instr_asm, SDNode OpNode>:
167 (ins CPURegs:$b, uimm16:$c),
168 !strconcat(instr_asm, "\t$dst, $b, $c"),
169 [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt16:$c))], IIAlu>;
171 class LogicNOR<bits<6> op, bits<6> func, string instr_asm>:
175 (ins CPURegs:$b, CPURegs:$c),
176 !strconcat(instr_asm, "\t$dst, $b, $c"),
177 [(set CPURegs:$dst, (not (or CPURegs:$b, CPURegs:$c)))], IIAlu>;
181 class LogicR_shift_imm<bits<6> func, string instr_asm, SDNode OpNode>:
185 (ins CPURegs:$b, shamt:$c),
186 !strconcat(instr_asm, "\t$dst, $b, $c"),
187 [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt5:$c))], IIAlu>;
189 class LogicR_shift_reg<bits<6> func, string instr_asm, SDNode OpNode>:
193 (ins CPURegs:$b, CPURegs:$c),
194 !strconcat(instr_asm, "\t$dst, $b, $c"),
195 [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
197 // Load Upper Imediate
198 class LoadUpper<bits<6> op, string instr_asm>:
202 !strconcat(instr_asm, "\t$dst, $imm"),
206 let isSimpleLoad = 1, hasDelaySlot = 1 in
207 class LoadM<bits<6> op, string instr_asm, PatFrag OpNode>:
211 !strconcat(instr_asm, "\t$dst, $addr"),
212 [(set CPURegs:$dst, (OpNode addr:$addr))], IILoad>;
214 class StoreM<bits<6> op, string instr_asm, PatFrag OpNode>:
217 (ins CPURegs:$dst, mem:$addr),
218 !strconcat(instr_asm, "\t$dst, $addr"),
219 [(OpNode CPURegs:$dst, addr:$addr)], IIStore>;
221 // Conditional Branch
222 let isBranch = 1, isTerminator=1, hasDelaySlot = 1 in {
223 class CBranch<bits<6> op, string instr_asm, PatFrag cond_op>:
226 (ins CPURegs:$a, CPURegs:$b, brtarget:$offset),
227 !strconcat(instr_asm, "\t$a, $b, $offset"),
228 [(brcond (cond_op CPURegs:$a, CPURegs:$b), bb:$offset)],
232 class CBranchZero<bits<6> op, string instr_asm, PatFrag cond_op>:
235 (ins CPURegs:$src, brtarget:$offset),
236 !strconcat(instr_asm, "\t$src, $offset"),
237 [(brcond (cond_op CPURegs:$src, 0), bb:$offset)],
242 class SetCC_R<bits<6> op, bits<6> func, string instr_asm,
247 (ins CPURegs:$b, CPURegs:$c),
248 !strconcat(instr_asm, "\t$dst, $b, $c"),
249 [(set CPURegs:$dst, (cond_op CPURegs:$b, CPURegs:$c))],
252 class SetCC_I<bits<6> op, string instr_asm, PatFrag cond_op,
253 Operand Od, PatLeaf imm_type>:
256 (ins CPURegs:$b, Od:$c),
257 !strconcat(instr_asm, "\t$dst, $b, $c"),
258 [(set CPURegs:$dst, (cond_op CPURegs:$b, imm_type:$c))],
261 // Unconditional branch
262 let isBranch=1, isTerminator=1, isBarrier=1, hasDelaySlot = 1 in
263 class JumpFJ<bits<6> op, string instr_asm>:
266 (ins brtarget:$target),
267 !strconcat(instr_asm, "\t$target"),
268 [(br bb:$target)], IIBranch>;
270 let isBranch=1, isTerminator=1, isBarrier=1, rd=0, hasDelaySlot = 1 in
271 class JumpFR<bits<6> op, bits<6> func, string instr_asm>:
275 (ins CPURegs:$target),
276 !strconcat(instr_asm, "\t$target"),
277 [(brind CPURegs:$target)], IIBranch>;
279 // Jump and Link (Call)
280 let isCall=1, hasDelaySlot=1,
281 // All calls clobber the non-callee saved registers...
282 Defs = [AT, V0, V1, A0, A1, A2, A3, T0, T1, T2,
283 T3, T4, T5, T6, T7, T8, T9, K0, K1], Uses = [GP] in {
284 class JumpLink<bits<6> op, string instr_asm>:
287 (ins calltarget:$target),
288 !strconcat(instr_asm, "\t$target"),
289 [(MipsJmpLink imm:$target)], IIBranch>;
292 class JumpLinkReg<bits<6> op, bits<6> func, string instr_asm>:
297 !strconcat(instr_asm, "\t$rs"),
298 [(MipsJmpLink CPURegs:$rs)], IIBranch>;
300 class BranchLink<string instr_asm>:
303 (ins CPURegs:$rs, brtarget:$target),
304 !strconcat(instr_asm, "\t$rs, $target"),
309 class MulDiv<bits<6> func, string instr_asm, InstrItinClass itin>:
313 (ins CPURegs:$a, CPURegs:$b),
314 !strconcat(instr_asm, "\t$a, $b"),
318 class MoveFromTo<bits<6> func, string instr_asm>:
323 !strconcat(instr_asm, "\t$dst"),
326 // Count Leading Ones/Zeros in Word
327 class CountLeading<bits<6> func, string instr_asm>:
332 !strconcat(instr_asm, "\t$dst, $src"),
335 class EffectiveAddress<string instr_asm> :
340 [(set CPURegs:$dst, addr:$addr)], IIAlu>;
342 class SignExtInReg<bits<6> func, string instr_asm, ValueType vt>:
343 FR< 0x3f, func, (outs CPURegs:$dst), (ins CPURegs:$src),
344 !strconcat(instr_asm, "\t$dst, $src"),
345 [(set CPURegs:$dst, (sext_inreg CPURegs:$src, vt))], NoItinerary>;
348 //===----------------------------------------------------------------------===//
349 // Pseudo instructions
350 //===----------------------------------------------------------------------===//
352 // As stack alignment is always done with addiu, we need a 16-bit immediate
353 let Defs = [SP], Uses = [SP] in {
354 def ADJCALLSTACKDOWN : MipsPseudo<(outs), (ins uimm16:$amt),
355 "!ADJCALLSTACKDOWN $amt",
356 [(callseq_start imm:$amt)]>;
357 def ADJCALLSTACKUP : MipsPseudo<(outs), (ins uimm16:$amt1, uimm16:$amt2),
358 "!ADJCALLSTACKUP $amt1",
359 [(callseq_end imm:$amt1, imm:$amt2)]>;
362 // Some assembly macros need to avoid pseudoinstructions and assembler
363 // automatic reodering, we should reorder ourselves.
364 def MACRO : MipsPseudo<(outs), (ins), ".set\tmacro", []>;
365 def REORDER : MipsPseudo<(outs), (ins), ".set\treorder", []>;
366 def NOMACRO : MipsPseudo<(outs), (ins), ".set\tnomacro", []>;
367 def NOREORDER : MipsPseudo<(outs), (ins), ".set\tnoreorder", []>;
369 // When handling PIC code the assembler needs .cpload and .cprestore
370 // directives. If the real instructions corresponding these directives
371 // are used, we have the same behavior, but get also a bunch of warnings
372 // from the assembler.
373 def CPLOAD : MipsPseudo<(outs), (ins CPURegs:$picreg), ".cpload\t$picreg", []>;
374 def CPRESTORE : MipsPseudo<(outs), (ins uimm16:$loc), ".cprestore\t$loc\n", []>;
376 // The supported Mips ISAs dont have any instruction close to the SELECT_CC
377 // operation. The solution is to create a Mips pseudo SELECT_CC instruction
378 // (MipsSelectCC), use LowerSELECT_CC to generate this instruction and finally
379 // replace it for real supported nodes into EmitInstrWithCustomInserter
380 let usesCustomDAGSchedInserter = 1 in {
381 class PseudoSelCC<RegisterClass RC, string asmstr>:
382 MipsPseudo<(outs RC:$dst), (ins CPURegs:$CmpRes, RC:$T, RC:$F), asmstr,
383 [(set RC:$dst, (MipsSelectCC CPURegs:$CmpRes, RC:$T, RC:$F))]>;
386 def Select_CC : PseudoSelCC<CPURegs, "# MipsSelect_CC_i32">;
388 //===----------------------------------------------------------------------===//
389 // Instruction definition
390 //===----------------------------------------------------------------------===//
392 //===----------------------------------------------------------------------===//
393 // MipsI Instructions
394 //===----------------------------------------------------------------------===//
396 /// Arithmetic Instructions (ALU Immediate)
397 def ADDiu : ArithI<0x09, "addiu", add, uimm16, immZExt16>;
398 def ADDi : ArithI<0x08, "addi", add, simm16, immSExt16>;
399 def SLTi : SetCC_I<0x0a, "slti", setlt, simm16, immSExt16>;
400 def SLTiu : SetCC_I<0x0b, "sltiu", setult, uimm16, immZExt16>;
401 def ANDi : LogicI<0x0c, "andi", and>;
402 def ORi : LogicI<0x0d, "ori", or>;
403 def XORi : LogicI<0x0e, "xori", xor>;
404 def LUi : LoadUpper<0x0f, "lui">;
406 /// Arithmetic Instructions (3-Operand, R-Type)
407 def ADDu : ArithR<0x00, 0x21, "addu", add, IIAlu>;
408 def SUBu : ArithR<0x00, 0x23, "subu", sub, IIAlu>;
409 def ADD : ArithOverflowR<0x00, 0x20, "add">;
410 def SUB : ArithOverflowR<0x00, 0x22, "sub">;
411 def SLT : SetCC_R<0x00, 0x2a, "slt", setlt>;
412 def SLTu : SetCC_R<0x00, 0x2b, "sltu", setult>;
413 def AND : LogicR<0x24, "and", and>;
414 def OR : LogicR<0x25, "or", or>;
415 def XOR : LogicR<0x26, "xor", xor>;
416 def NOR : LogicNOR<0x00, 0x27, "nor">;
418 /// Shift Instructions
419 def SLL : LogicR_shift_imm<0x00, "sll", shl>;
420 def SRL : LogicR_shift_imm<0x02, "srl", srl>;
421 def SRA : LogicR_shift_imm<0x03, "sra", sra>;
422 def SLLV : LogicR_shift_reg<0x04, "sllv", shl>;
423 def SRLV : LogicR_shift_reg<0x06, "srlv", srl>;
424 def SRAV : LogicR_shift_reg<0x07, "srav", sra>;
426 /// Load and Store Instructions
427 def LB : LoadM<0x20, "lb", sextloadi8>;
428 def LBu : LoadM<0x24, "lbu", zextloadi8>;
429 def LH : LoadM<0x21, "lh", sextloadi16>;
430 def LHu : LoadM<0x25, "lhu", zextloadi16>;
431 def LW : LoadM<0x23, "lw", load>;
432 def SB : StoreM<0x28, "sb", truncstorei8>;
433 def SH : StoreM<0x29, "sh", truncstorei16>;
434 def SW : StoreM<0x2b, "sw", store>;
436 /// Jump and Branch Instructions
437 def J : JumpFJ<0x02, "j">;
438 def JR : JumpFR<0x00, 0x08, "jr">;
439 def JAL : JumpLink<0x03, "jal">;
440 def JALR : JumpLinkReg<0x00, 0x09, "jalr">;
441 def BEQ : CBranch<0x04, "beq", seteq>;
442 def BNE : CBranch<0x05, "bne", setne>;
445 def BGEZ : CBranchZero<0x01, "bgez", setge>;
448 def BGTZ : CBranchZero<0x07, "bgtz", setgt>;
449 def BLEZ : CBranchZero<0x07, "blez", setle>;
450 def BLTZ : CBranchZero<0x01, "bltz", setlt>;
453 def BGEZAL : BranchLink<"bgezal">;
454 def BLTZAL : BranchLink<"bltzal">;
456 let isReturn=1, isTerminator=1, hasDelaySlot=1,
457 isBarrier=1, hasCtrlDep=1, rs=0, rt=0, shamt=0 in
458 def RET : FR <0x00, 0x02, (outs), (ins CPURegs:$target),
459 "jr\t$target", [(MipsRet CPURegs:$target)], IIBranch>;
461 /// Multiply and Divide Instructions.
462 def MULT : MulDiv<0x18, "mult", IIImul>;
463 def MULTu : MulDiv<0x19, "multu", IIImul>;
464 def DIV : MulDiv<0x1a, "div", IIIdiv>;
465 def DIVu : MulDiv<0x1b, "divu", IIIdiv>;
466 def MFHI : MoveFromTo<0x10, "mfhi">;
467 def MFLO : MoveFromTo<0x12, "mflo">;
468 def MTHI : MoveFromTo<0x11, "mthi">;
469 def MTLO : MoveFromTo<0x13, "mtlo">;
471 /// Sign Ext In Register Instructions.
472 let Predicates = [HasSEInReg] in {
473 let shamt = 0x10, rs = 0 in
474 def SEB : SignExtInReg<0x21, "seb", i8>;
476 let shamt = 0x18, rs = 0 in
477 def SEH : SignExtInReg<0x20, "seh", i16>;
482 def NOP : FJ<0, (outs), (ins), "nop", [], IIAlu>;
484 // FrameIndexes are legalized when they are operands from load/store
485 // instructions. The same not happens for stack address copies, so an
486 // add op with mem ComplexPattern is used and the stack address copy
487 // can be matched. It's similar to Sparc LEA_ADDRi
488 def LEA_ADDiu : EffectiveAddress<"addiu\t$dst, ${addr:stackloc}">;
491 // CLO/CLZ are part of the newer MIPS32(tm) instruction
492 // set and not older Mips I keep this for future use
494 //def CLO : CountLeading<0x21, "clo">;
495 //def CLZ : CountLeading<0x20, "clz">;
497 // MADD*/MSUB* are not part of MipsI either.
498 //def MADD : MArithR<0x00, "madd">;
499 //def MADDU : MArithR<0x01, "maddu">;
500 //def MSUB : MArithR<0x04, "msub">;
501 //def MSUBU : MArithR<0x05, "msubu">;
503 // MUL is a assembly macro in the current used ISAs. In recent ISA's
504 // it is a real instruction.
505 //def MUL : ArithR<0x1c, 0x02, "mul", mul, IIImul>;
507 //===----------------------------------------------------------------------===//
508 // Arbitrary patterns that map to one or more instructions
509 //===----------------------------------------------------------------------===//
512 def : Pat<(i32 immSExt16:$in),
513 (ADDiu ZERO, imm:$in)>;
514 def : Pat<(i32 immZExt16:$in),
515 (ORi ZERO, imm:$in)>;
517 // Arbitrary immediates
518 def : Pat<(i32 imm:$imm),
519 (ORi (LUi (HI16 imm:$imm)), (LO16 imm:$imm))>;
522 def : Pat<(subc CPURegs:$lhs, CPURegs:$rhs),
523 (SUBu CPURegs:$lhs, CPURegs:$rhs)>;
524 def : Pat<(addc CPURegs:$lhs, CPURegs:$rhs),
525 (ADDu CPURegs:$lhs, CPURegs:$rhs)>;
526 def : Pat<(addc CPURegs:$src, imm:$imm),
527 (ADDiu CPURegs:$src, imm:$imm)>;
530 def : Pat<(MipsJmpLink (i32 tglobaladdr:$dst)),
531 (JAL tglobaladdr:$dst)>;
532 def : Pat<(MipsJmpLink (i32 texternalsym:$dst)),
533 (JAL texternalsym:$dst)>;
534 def : Pat<(MipsJmpLink CPURegs:$dst),
535 (JALR CPURegs:$dst)>;
538 def : Pat<(MipsHi tglobaladdr:$in), (LUi tglobaladdr:$in)>;
539 def : Pat<(add CPURegs:$hi, (MipsLo tglobaladdr:$lo)),
540 (ADDiu CPURegs:$hi, tglobaladdr:$lo)>;
542 def : Pat<(MipsHi tjumptable:$in), (LUi tjumptable:$in)>;
543 def : Pat<(add CPURegs:$hi, (MipsLo tjumptable:$lo)),
544 (ADDiu CPURegs:$hi, tjumptable:$lo)>;
546 def : Pat<(MipsHi tconstpool:$in), (LUi tconstpool:$in)>;
547 def : Pat<(add CPURegs:$hi, (MipsLo tconstpool:$lo)),
548 (ADDiu CPURegs:$hi, tconstpool:$lo)>;
551 def : Pat<(add CPURegs:$gp, (MipsGPRel tglobaladdr:$in)),
552 (ADDiu CPURegs:$gp, tglobaladdr:$in)>;
553 def : Pat<(add CPURegs:$gp, (MipsGPRel tconstpool:$in)),
554 (ADDiu CPURegs:$gp, tconstpool:$in)>;
556 // Mips does not have "not", so we expand our way
557 def : Pat<(not CPURegs:$in),
558 (NOR CPURegs:$in, ZERO)>;
560 // extended load and stores
561 def : Pat<(i32 (extloadi1 addr:$src)), (LBu addr:$src)>;
562 def : Pat<(i32 (extloadi8 addr:$src)), (LBu addr:$src)>;
563 def : Pat<(i32 (extloadi16 addr:$src)), (LHu addr:$src)>;
566 def : Pat<(store (i32 0), addr:$dst), (SW ZERO, addr:$dst)>;
569 // direct match equal/notequal zero branches
570 def : Pat<(brcond (setne CPURegs:$lhs, 0), bb:$dst),
571 (BNE CPURegs:$lhs, ZERO, bb:$dst)>;
572 def : Pat<(brcond (seteq CPURegs:$lhs, 0), bb:$dst),
573 (BEQ CPURegs:$lhs, ZERO, bb:$dst)>;
575 def : Pat<(brcond (setge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
576 (BGEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
577 def : Pat<(brcond (setuge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
578 (BGEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
580 def : Pat<(brcond (setgt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
581 (BGTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
582 def : Pat<(brcond (setugt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
583 (BGTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
585 def : Pat<(brcond (setle CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
586 (BLEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
587 def : Pat<(brcond (setule CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
588 (BLEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
590 def : Pat<(brcond (setlt CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
591 (BNE (SLTi CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
592 def : Pat<(brcond (setult CPURegs:$lhs, immZExt16:$rhs), bb:$dst),
593 (BNE (SLTiu CPURegs:$lhs, immZExt16:$rhs), ZERO, bb:$dst)>;
594 def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
595 (BNE (SLT CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
596 def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
597 (BNE (SLTu CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
599 def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
600 (BLTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
601 def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
602 (BLTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
604 // generic brcond pattern
605 def : Pat<(brcond CPURegs:$cond, bb:$dst),
606 (BNE CPURegs:$cond, ZERO, bb:$dst)>;
608 // setcc patterns, only matched when there
609 // is no brcond following a setcc operation
610 def : Pat<(setle CPURegs:$lhs, CPURegs:$rhs),
611 (XORi (SLT CPURegs:$rhs, CPURegs:$lhs), 1)>;
612 def : Pat<(setule CPURegs:$lhs, CPURegs:$rhs),
613 (XORi (SLTu CPURegs:$rhs, CPURegs:$lhs), 1)>;
615 def : Pat<(setgt CPURegs:$lhs, CPURegs:$rhs),
616 (SLT CPURegs:$rhs, CPURegs:$lhs)>;
617 def : Pat<(setugt CPURegs:$lhs, CPURegs:$rhs),
618 (SLTu CPURegs:$rhs, CPURegs:$lhs)>;
620 def : Pat<(setge CPURegs:$lhs, CPURegs:$rhs),
621 (XORi (SLT CPURegs:$lhs, CPURegs:$rhs), 1)>;
622 def : Pat<(setuge CPURegs:$lhs, CPURegs:$rhs),
623 (XORi (SLTu CPURegs:$lhs, CPURegs:$rhs), 1)>;
625 def : Pat<(setne CPURegs:$lhs, CPURegs:$rhs),
626 (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
627 (SLT CPURegs:$rhs, CPURegs:$lhs))>;
629 def : Pat<(seteq CPURegs:$lhs, CPURegs:$rhs),
630 (XORi (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
631 (SLT CPURegs:$rhs, CPURegs:$lhs)), 1)>;
633 def : Pat<(setge CPURegs:$lhs, immSExt16:$rhs),
634 (XORi (SLTi CPURegs:$lhs, immSExt16:$rhs), 1)>;
635 def : Pat<(setuge CPURegs:$lhs, immZExt16:$rhs),
636 (XORi (SLTiu CPURegs:$lhs, immZExt16:$rhs), 1)>;
638 //===----------------------------------------------------------------------===//
639 // Floating Point Support
640 //===----------------------------------------------------------------------===//
642 include "MipsInstrFPU.td"