Merge remote-tracking branches 'regulator/topic/88pm800', 'regulator/topic/ab8500...
[firefly-linux-kernel-4.4.55.git] / drivers / video / fbdev / bfin-lq035q1-fb.c
1 /*
2  * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02
3  *
4  * Copyright 2008-2009 Analog Devices Inc.
5  * Licensed under the GPL-2 or later.
6  */
7
8 #define DRIVER_NAME "bfin-lq035q1"
9 #define pr_fmt(fmt) DRIVER_NAME ": " fmt
10
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/errno.h>
14 #include <linux/string.h>
15 #include <linux/fb.h>
16 #include <linux/gpio.h>
17 #include <linux/slab.h>
18 #include <linux/init.h>
19 #include <linux/types.h>
20 #include <linux/interrupt.h>
21 #include <linux/device.h>
22 #include <linux/backlight.h>
23 #include <linux/lcd.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/platform_device.h>
26 #include <linux/spi/spi.h>
27
28 #include <asm/blackfin.h>
29 #include <asm/irq.h>
30 #include <asm/dma.h>
31 #include <asm/portmux.h>
32 #include <asm/gptimers.h>
33
34 #include <asm/bfin-lq035q1.h>
35
36 #if defined(BF533_FAMILY) || defined(BF538_FAMILY)
37 #define TIMER_HSYNC_id                  TIMER1_id
38 #define TIMER_HSYNCbit                  TIMER1bit
39 #define TIMER_HSYNC_STATUS_TRUN         TIMER_STATUS_TRUN1
40 #define TIMER_HSYNC_STATUS_TIMIL        TIMER_STATUS_TIMIL1
41 #define TIMER_HSYNC_STATUS_TOVF         TIMER_STATUS_TOVF1
42
43 #define TIMER_VSYNC_id                  TIMER2_id
44 #define TIMER_VSYNCbit                  TIMER2bit
45 #define TIMER_VSYNC_STATUS_TRUN         TIMER_STATUS_TRUN2
46 #define TIMER_VSYNC_STATUS_TIMIL        TIMER_STATUS_TIMIL2
47 #define TIMER_VSYNC_STATUS_TOVF         TIMER_STATUS_TOVF2
48 #else
49 #define TIMER_HSYNC_id                  TIMER0_id
50 #define TIMER_HSYNCbit                  TIMER0bit
51 #define TIMER_HSYNC_STATUS_TRUN         TIMER_STATUS_TRUN0
52 #define TIMER_HSYNC_STATUS_TIMIL        TIMER_STATUS_TIMIL0
53 #define TIMER_HSYNC_STATUS_TOVF         TIMER_STATUS_TOVF0
54
55 #define TIMER_VSYNC_id                  TIMER1_id
56 #define TIMER_VSYNCbit                  TIMER1bit
57 #define TIMER_VSYNC_STATUS_TRUN         TIMER_STATUS_TRUN1
58 #define TIMER_VSYNC_STATUS_TIMIL        TIMER_STATUS_TIMIL1
59 #define TIMER_VSYNC_STATUS_TOVF         TIMER_STATUS_TOVF1
60 #endif
61
62 #define LCD_X_RES               320     /* Horizontal Resolution */
63 #define LCD_Y_RES               240     /* Vertical Resolution */
64 #define DMA_BUS_SIZE            16
65 #define U_LINE                  4       /* Blanking Lines */
66
67
68 /* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD)
69  * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
70  */
71
72
73 #define BFIN_LCD_NBR_PALETTE_ENTRIES    256
74
75 #define PPI_TX_MODE                     0x2
76 #define PPI_XFER_TYPE_11                0xC
77 #define PPI_PORT_CFG_01                 0x10
78 #define PPI_POLS_1                      0x8000
79
80 #define LQ035_INDEX                     0x74
81 #define LQ035_DATA                      0x76
82
83 #define LQ035_DRIVER_OUTPUT_CTL         0x1
84 #define LQ035_SHUT_CTL                  0x11
85
86 #define LQ035_DRIVER_OUTPUT_MASK        (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV)
87 #define LQ035_DRIVER_OUTPUT_DEFAULT     (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK)
88
89 #define LQ035_SHUT                      (1 << 0)        /* Shutdown */
90 #define LQ035_ON                        (0 << 0)        /* Shutdown */
91
92 struct bfin_lq035q1fb_info {
93         struct fb_info *fb;
94         struct device *dev;
95         struct spi_driver spidrv;
96         struct bfin_lq035q1fb_disp_info *disp_info;
97         unsigned char *fb_buffer;       /* RGB Buffer */
98         dma_addr_t dma_handle;
99         int lq035_open_cnt;
100         int irq;
101         spinlock_t lock;        /* lock */
102         u32 pseudo_pal[16];
103
104         u32 lcd_bpp;
105         u32 h_actpix;
106         u32 h_period;
107         u32 h_pulse;
108         u32 h_start;
109         u32 v_lines;
110         u32 v_pulse;
111         u32 v_period;
112 };
113
114 static int nocursor;
115 module_param(nocursor, int, 0644);
116 MODULE_PARM_DESC(nocursor, "cursor enable/disable");
117
118 struct spi_control {
119         unsigned short mode;
120 };
121
122 static int lq035q1_control(struct spi_device *spi, unsigned char reg, unsigned short value)
123 {
124         int ret;
125         u8 regs[3] = { LQ035_INDEX, 0, 0 };
126         u8 dat[3] = { LQ035_DATA, 0, 0 };
127
128         if (!spi)
129                 return -ENODEV;
130
131         regs[2] = reg;
132         dat[1] = value >> 8;
133         dat[2] = value & 0xFF;
134
135         ret = spi_write(spi, regs, ARRAY_SIZE(regs));
136         ret |= spi_write(spi, dat, ARRAY_SIZE(dat));
137         return ret;
138 }
139
140 static int lq035q1_spidev_probe(struct spi_device *spi)
141 {
142         int ret;
143         struct spi_control *ctl;
144         struct bfin_lq035q1fb_info *info = container_of(spi->dev.driver,
145                                                 struct bfin_lq035q1fb_info,
146                                                 spidrv.driver);
147
148         ctl = kzalloc(sizeof(*ctl), GFP_KERNEL);
149
150         if (!ctl)
151                 return -ENOMEM;
152
153         ctl->mode = (info->disp_info->mode &
154                 LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT;
155
156         ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
157         ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
158         if (ret) {
159                 kfree(ctl);
160                 return ret;
161         }
162
163         spi_set_drvdata(spi, ctl);
164
165         return 0;
166 }
167
168 static int lq035q1_spidev_remove(struct spi_device *spi)
169 {
170         return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
171 }
172
173 #ifdef CONFIG_PM_SLEEP
174 static int lq035q1_spidev_suspend(struct device *dev)
175 {
176         struct spi_device *spi = to_spi_device(dev);
177
178         return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
179 }
180
181 static int lq035q1_spidev_resume(struct device *dev)
182 {
183         struct spi_device *spi = to_spi_device(dev);
184         struct spi_control *ctl = spi_get_drvdata(spi);
185         int ret;
186
187         ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
188         if (ret)
189                 return ret;
190
191         return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
192 }
193
194 static SIMPLE_DEV_PM_OPS(lq035q1_spidev_pm_ops, lq035q1_spidev_suspend,
195         lq035q1_spidev_resume);
196 #define LQ035Q1_SPIDEV_PM_OPS (&lq035q1_spidev_pm_ops)
197
198 #else
199 #define LQ035Q1_SPIDEV_PM_OPS NULL
200 #endif
201
202 /* Power down all displays on reboot, poweroff or halt */
203 static void lq035q1_spidev_shutdown(struct spi_device *spi)
204 {
205         lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
206 }
207
208 static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg)
209 {
210         if (info->disp_info->use_bl)
211                 gpio_set_value(info->disp_info->gpio_bl, arg);
212
213         return 0;
214 }
215
216 static int bfin_lq035q1_calc_timing(struct bfin_lq035q1fb_info *fbi)
217 {
218         unsigned long clocks_per_pix, cpld_pipeline_delay_cor;
219
220         /*
221          * Interface 16/18-bit TFT over an 8-bit wide PPI using a small
222          * Programmable Logic Device (CPLD)
223          * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165
224          */
225
226         switch (fbi->disp_info->ppi_mode) {
227         case USE_RGB565_16_BIT_PPI:
228                 fbi->lcd_bpp = 16;
229                 clocks_per_pix = 1;
230                 cpld_pipeline_delay_cor = 0;
231                 break;
232         case USE_RGB565_8_BIT_PPI:
233                 fbi->lcd_bpp = 16;
234                 clocks_per_pix = 2;
235                 cpld_pipeline_delay_cor = 3;
236                 break;
237         case USE_RGB888_8_BIT_PPI:
238                 fbi->lcd_bpp = 24;
239                 clocks_per_pix = 3;
240                 cpld_pipeline_delay_cor = 5;
241                 break;
242         default:
243                 return -EINVAL;
244         }
245
246         /*
247          * HS and VS timing parameters (all in number of PPI clk ticks)
248          */
249
250         fbi->h_actpix = (LCD_X_RES * clocks_per_pix);   /* active horizontal pixel */
251         fbi->h_period = (336 * clocks_per_pix);         /* HS period */
252         fbi->h_pulse = (2 * clocks_per_pix);                            /* HS pulse width */
253         fbi->h_start = (7 * clocks_per_pix + cpld_pipeline_delay_cor);  /* first valid pixel */
254
255         fbi->v_lines = (LCD_Y_RES + U_LINE);            /* total vertical lines */
256         fbi->v_pulse = (2 * clocks_per_pix);            /* VS pulse width (1-5 H_PERIODs) */
257         fbi->v_period = (fbi->h_period * fbi->v_lines); /* VS period */
258
259         return 0;
260 }
261
262 static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi)
263 {
264         unsigned ppi_pmode;
265
266         if (fbi->disp_info->ppi_mode == USE_RGB565_16_BIT_PPI)
267                 ppi_pmode = DLEN_16;
268         else
269                 ppi_pmode = (DLEN_8 | PACK_EN);
270
271         bfin_write_PPI_DELAY(fbi->h_start);
272         bfin_write_PPI_COUNT(fbi->h_actpix - 1);
273         bfin_write_PPI_FRAME(fbi->v_lines);
274
275         bfin_write_PPI_CONTROL(PPI_TX_MODE |       /* output mode , PORT_DIR */
276                                 PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
277                                 PPI_PORT_CFG_01 |  /* two frame sync PORT_CFG */
278                                 ppi_pmode |        /* 8/16 bit data length / PACK_EN? */
279                                 PPI_POLS_1);       /* faling edge syncs POLS */
280 }
281
282 static inline void bfin_lq035q1_disable_ppi(void)
283 {
284         bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
285 }
286
287 static inline void bfin_lq035q1_enable_ppi(void)
288 {
289         bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
290 }
291
292 static void bfin_lq035q1_start_timers(void)
293 {
294         enable_gptimers(TIMER_VSYNCbit | TIMER_HSYNCbit);
295 }
296
297 static void bfin_lq035q1_stop_timers(void)
298 {
299         disable_gptimers(TIMER_HSYNCbit | TIMER_VSYNCbit);
300
301         set_gptimer_status(0, TIMER_HSYNC_STATUS_TRUN | TIMER_VSYNC_STATUS_TRUN |
302                                 TIMER_HSYNC_STATUS_TIMIL | TIMER_VSYNC_STATUS_TIMIL |
303                                  TIMER_HSYNC_STATUS_TOVF | TIMER_VSYNC_STATUS_TOVF);
304
305 }
306
307 static void bfin_lq035q1_init_timers(struct bfin_lq035q1fb_info *fbi)
308 {
309
310         bfin_lq035q1_stop_timers();
311
312         set_gptimer_period(TIMER_HSYNC_id, fbi->h_period);
313         set_gptimer_pwidth(TIMER_HSYNC_id, fbi->h_pulse);
314         set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
315                                       TIMER_TIN_SEL | TIMER_CLK_SEL|
316                                       TIMER_EMU_RUN);
317
318         set_gptimer_period(TIMER_VSYNC_id, fbi->v_period);
319         set_gptimer_pwidth(TIMER_VSYNC_id, fbi->v_pulse);
320         set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
321                                       TIMER_TIN_SEL | TIMER_CLK_SEL |
322                                       TIMER_EMU_RUN);
323
324 }
325
326 static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi)
327 {
328
329
330         set_dma_config(CH_PPI,
331                        set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
332                                            INTR_DISABLE, DIMENSION_2D,
333                                            DATA_SIZE_16,
334                                            DMA_NOSYNC_KEEP_DMA_BUF));
335         set_dma_x_count(CH_PPI, (LCD_X_RES * fbi->lcd_bpp) / DMA_BUS_SIZE);
336         set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
337         set_dma_y_count(CH_PPI, fbi->v_lines);
338
339         set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
340         set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
341
342 }
343
344 static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
345                             P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
346                             P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
347                             P_PPI0_D6, P_PPI0_D7, P_PPI0_D8,
348                             P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
349                             P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
350                             P_PPI0_D15, 0};
351
352 static const u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
353                             P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
354                             P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
355                             P_PPI0_D6, P_PPI0_D7, 0};
356
357 static inline void bfin_lq035q1_free_ports(unsigned ppi16)
358 {
359         if (ppi16)
360                 peripheral_free_list(ppi0_req_16);
361         else
362                 peripheral_free_list(ppi0_req_8);
363
364         if (ANOMALY_05000400)
365                 gpio_free(P_IDENT(P_PPI0_FS3));
366 }
367
368 static int bfin_lq035q1_request_ports(struct platform_device *pdev,
369                                       unsigned ppi16)
370 {
371         int ret;
372         /* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode:
373          * Drive PPI_FS3 Low
374          */
375         if (ANOMALY_05000400) {
376                 int ret = gpio_request_one(P_IDENT(P_PPI0_FS3),
377                                         GPIOF_OUT_INIT_LOW, "PPI_FS3");
378                 if (ret)
379                         return ret;
380         }
381
382         if (ppi16)
383                 ret = peripheral_request_list(ppi0_req_16, DRIVER_NAME);
384         else
385                 ret = peripheral_request_list(ppi0_req_8, DRIVER_NAME);
386
387         if (ret) {
388                 dev_err(&pdev->dev, "requesting peripherals failed\n");
389                 return -EFAULT;
390         }
391
392         return 0;
393 }
394
395 static int bfin_lq035q1_fb_open(struct fb_info *info, int user)
396 {
397         struct bfin_lq035q1fb_info *fbi = info->par;
398
399         spin_lock(&fbi->lock);
400         fbi->lq035_open_cnt++;
401
402         if (fbi->lq035_open_cnt <= 1) {
403
404                 bfin_lq035q1_disable_ppi();
405                 SSYNC();
406
407                 bfin_lq035q1_config_dma(fbi);
408                 bfin_lq035q1_config_ppi(fbi);
409                 bfin_lq035q1_init_timers(fbi);
410
411                 /* start dma */
412                 enable_dma(CH_PPI);
413                 bfin_lq035q1_enable_ppi();
414                 bfin_lq035q1_start_timers();
415                 lq035q1_backlight(fbi, 1);
416         }
417
418         spin_unlock(&fbi->lock);
419
420         return 0;
421 }
422
423 static int bfin_lq035q1_fb_release(struct fb_info *info, int user)
424 {
425         struct bfin_lq035q1fb_info *fbi = info->par;
426
427         spin_lock(&fbi->lock);
428
429         fbi->lq035_open_cnt--;
430
431         if (fbi->lq035_open_cnt <= 0) {
432                 lq035q1_backlight(fbi, 0);
433                 bfin_lq035q1_disable_ppi();
434                 SSYNC();
435                 disable_dma(CH_PPI);
436                 bfin_lq035q1_stop_timers();
437         }
438
439         spin_unlock(&fbi->lock);
440
441         return 0;
442 }
443
444 static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var,
445                                      struct fb_info *info)
446 {
447         struct bfin_lq035q1fb_info *fbi = info->par;
448
449         if (var->bits_per_pixel == fbi->lcd_bpp) {
450                 var->red.offset = info->var.red.offset;
451                 var->green.offset = info->var.green.offset;
452                 var->blue.offset = info->var.blue.offset;
453                 var->red.length = info->var.red.length;
454                 var->green.length = info->var.green.length;
455                 var->blue.length = info->var.blue.length;
456                 var->transp.offset = 0;
457                 var->transp.length = 0;
458                 var->transp.msb_right = 0;
459                 var->red.msb_right = 0;
460                 var->green.msb_right = 0;
461                 var->blue.msb_right = 0;
462         } else {
463                 pr_debug("%s: depth not supported: %u BPP\n", __func__,
464                          var->bits_per_pixel);
465                 return -EINVAL;
466         }
467
468         if (info->var.xres != var->xres || info->var.yres != var->yres ||
469             info->var.xres_virtual != var->xres_virtual ||
470             info->var.yres_virtual != var->yres_virtual) {
471                 pr_debug("%s: Resolution not supported: X%u x Y%u \n",
472                          __func__, var->xres, var->yres);
473                 return -EINVAL;
474         }
475
476         /*
477          *  Memory limit
478          */
479
480         if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
481                 pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
482                          __func__, var->yres_virtual);
483                 return -ENOMEM;
484         }
485
486
487         return 0;
488 }
489
490 int bfin_lq035q1_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
491 {
492         if (nocursor)
493                 return 0;
494         else
495                 return -EINVAL; /* just to force soft_cursor() call */
496 }
497
498 static int bfin_lq035q1_fb_setcolreg(u_int regno, u_int red, u_int green,
499                                    u_int blue, u_int transp,
500                                    struct fb_info *info)
501 {
502         if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
503                 return -EINVAL;
504
505         if (info->var.grayscale) {
506                 /* grayscale = 0.30*R + 0.59*G + 0.11*B */
507                 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
508         }
509
510         if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
511
512                 u32 value;
513                 /* Place color in the pseudopalette */
514                 if (regno > 16)
515                         return -EINVAL;
516
517                 red >>= (16 - info->var.red.length);
518                 green >>= (16 - info->var.green.length);
519                 blue >>= (16 - info->var.blue.length);
520
521                 value = (red << info->var.red.offset) |
522                     (green << info->var.green.offset) |
523                     (blue << info->var.blue.offset);
524                 value &= 0xFFFFFF;
525
526                 ((u32 *) (info->pseudo_palette))[regno] = value;
527
528         }
529
530         return 0;
531 }
532
533 static struct fb_ops bfin_lq035q1_fb_ops = {
534         .owner = THIS_MODULE,
535         .fb_open = bfin_lq035q1_fb_open,
536         .fb_release = bfin_lq035q1_fb_release,
537         .fb_check_var = bfin_lq035q1_fb_check_var,
538         .fb_fillrect = cfb_fillrect,
539         .fb_copyarea = cfb_copyarea,
540         .fb_imageblit = cfb_imageblit,
541         .fb_cursor = bfin_lq035q1_fb_cursor,
542         .fb_setcolreg = bfin_lq035q1_fb_setcolreg,
543 };
544
545 static irqreturn_t bfin_lq035q1_irq_error(int irq, void *dev_id)
546 {
547         /*struct bfin_lq035q1fb_info *info = (struct bfin_lq035q1fb_info *)dev_id;*/
548
549         u16 status = bfin_read_PPI_STATUS();
550         bfin_write_PPI_STATUS(-1);
551
552         if (status) {
553                 bfin_lq035q1_disable_ppi();
554                 disable_dma(CH_PPI);
555
556                 /* start dma */
557                 enable_dma(CH_PPI);
558                 bfin_lq035q1_enable_ppi();
559                 bfin_write_PPI_STATUS(-1);
560         }
561
562         return IRQ_HANDLED;
563 }
564
565 static int bfin_lq035q1_probe(struct platform_device *pdev)
566 {
567         struct bfin_lq035q1fb_info *info;
568         struct fb_info *fbinfo;
569         u32 active_video_mem_offset;
570         int ret;
571
572         ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI");
573         if (ret < 0) {
574                 dev_err(&pdev->dev, "PPI DMA unavailable\n");
575                 goto out1;
576         }
577
578         fbinfo = framebuffer_alloc(sizeof(*info), &pdev->dev);
579         if (!fbinfo) {
580                 ret = -ENOMEM;
581                 goto out2;
582         }
583
584         info = fbinfo->par;
585         info->fb = fbinfo;
586         info->dev = &pdev->dev;
587         spin_lock_init(&info->lock);
588
589         info->disp_info = pdev->dev.platform_data;
590
591         platform_set_drvdata(pdev, fbinfo);
592
593         ret = bfin_lq035q1_calc_timing(info);
594         if (ret < 0) {
595                 dev_err(&pdev->dev, "Failed PPI Mode\n");
596                 goto out3;
597         }
598
599         strcpy(fbinfo->fix.id, DRIVER_NAME);
600
601         fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
602         fbinfo->fix.type_aux = 0;
603         fbinfo->fix.xpanstep = 0;
604         fbinfo->fix.ypanstep = 0;
605         fbinfo->fix.ywrapstep = 0;
606         fbinfo->fix.accel = FB_ACCEL_NONE;
607         fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
608
609         fbinfo->var.nonstd = 0;
610         fbinfo->var.activate = FB_ACTIVATE_NOW;
611         fbinfo->var.height = -1;
612         fbinfo->var.width = -1;
613         fbinfo->var.accel_flags = 0;
614         fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
615
616         fbinfo->var.xres = LCD_X_RES;
617         fbinfo->var.xres_virtual = LCD_X_RES;
618         fbinfo->var.yres = LCD_Y_RES;
619         fbinfo->var.yres_virtual = LCD_Y_RES;
620         fbinfo->var.bits_per_pixel = info->lcd_bpp;
621
622         if (info->disp_info->mode & LQ035_BGR) {
623                 if (info->lcd_bpp == 24) {
624                         fbinfo->var.red.offset = 0;
625                         fbinfo->var.green.offset = 8;
626                         fbinfo->var.blue.offset = 16;
627                 } else {
628                         fbinfo->var.red.offset = 0;
629                         fbinfo->var.green.offset = 5;
630                         fbinfo->var.blue.offset = 11;
631                 }
632         } else {
633                 if (info->lcd_bpp == 24) {
634                         fbinfo->var.red.offset = 16;
635                         fbinfo->var.green.offset = 8;
636                         fbinfo->var.blue.offset = 0;
637                 } else {
638                         fbinfo->var.red.offset = 11;
639                         fbinfo->var.green.offset = 5;
640                         fbinfo->var.blue.offset = 0;
641                 }
642         }
643
644         fbinfo->var.transp.offset = 0;
645
646         if (info->lcd_bpp == 24) {
647                 fbinfo->var.red.length = 8;
648                 fbinfo->var.green.length = 8;
649                 fbinfo->var.blue.length = 8;
650         } else {
651                 fbinfo->var.red.length = 5;
652                 fbinfo->var.green.length = 6;
653                 fbinfo->var.blue.length = 5;
654         }
655
656         fbinfo->var.transp.length = 0;
657
658         active_video_mem_offset = ((U_LINE / 2) * LCD_X_RES * (info->lcd_bpp / 8));
659
660         fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * info->lcd_bpp / 8
661                                 + active_video_mem_offset;
662
663         fbinfo->fix.line_length = fbinfo->var.xres_virtual *
664             fbinfo->var.bits_per_pixel / 8;
665
666
667         fbinfo->fbops = &bfin_lq035q1_fb_ops;
668         fbinfo->flags = FBINFO_FLAG_DEFAULT;
669
670         info->fb_buffer =
671             dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
672                                GFP_KERNEL);
673
674         if (NULL == info->fb_buffer) {
675                 dev_err(&pdev->dev, "couldn't allocate dma buffer\n");
676                 ret = -ENOMEM;
677                 goto out3;
678         }
679
680         fbinfo->screen_base = (void *)info->fb_buffer + active_video_mem_offset;
681         fbinfo->fix.smem_start = (int)info->fb_buffer + active_video_mem_offset;
682
683         fbinfo->fbops = &bfin_lq035q1_fb_ops;
684
685         fbinfo->pseudo_palette = &info->pseudo_pal;
686
687         ret = fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0);
688         if (ret < 0) {
689                 dev_err(&pdev->dev, "failed to allocate colormap (%d entries)\n",
690                        BFIN_LCD_NBR_PALETTE_ENTRIES);
691                 goto out4;
692         }
693
694         ret = bfin_lq035q1_request_ports(pdev,
695                         info->disp_info->ppi_mode == USE_RGB565_16_BIT_PPI);
696         if (ret) {
697                 dev_err(&pdev->dev, "couldn't request gpio port\n");
698                 goto out6;
699         }
700
701         info->irq = platform_get_irq(pdev, 0);
702         if (info->irq < 0) {
703                 ret = -EINVAL;
704                 goto out7;
705         }
706
707         ret = request_irq(info->irq, bfin_lq035q1_irq_error, 0,
708                         DRIVER_NAME" PPI ERROR", info);
709         if (ret < 0) {
710                 dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n");
711                 goto out7;
712         }
713
714         info->spidrv.driver.name = DRIVER_NAME"-spi";
715         info->spidrv.probe    = lq035q1_spidev_probe;
716         info->spidrv.remove   = lq035q1_spidev_remove;
717         info->spidrv.shutdown = lq035q1_spidev_shutdown;
718         info->spidrv.driver.pm = LQ035Q1_SPIDEV_PM_OPS;
719
720         ret = spi_register_driver(&info->spidrv);
721         if (ret < 0) {
722                 dev_err(&pdev->dev, "couldn't register SPI Interface\n");
723                 goto out8;
724         }
725
726         if (info->disp_info->use_bl) {
727                 ret = gpio_request_one(info->disp_info->gpio_bl,
728                                         GPIOF_OUT_INIT_LOW, "LQ035 Backlight");
729
730                 if (ret) {
731                         dev_err(&pdev->dev, "failed to request GPIO %d\n",
732                                 info->disp_info->gpio_bl);
733                         goto out9;
734                 }
735         }
736
737         ret = register_framebuffer(fbinfo);
738         if (ret < 0) {
739                 dev_err(&pdev->dev, "unable to register framebuffer\n");
740                 goto out10;
741         }
742
743         dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n",
744                 LCD_X_RES, LCD_Y_RES, info->lcd_bpp);
745
746         return 0;
747
748  out10:
749         if (info->disp_info->use_bl)
750                 gpio_free(info->disp_info->gpio_bl);
751  out9:
752         spi_unregister_driver(&info->spidrv);
753  out8:
754         free_irq(info->irq, info);
755  out7:
756         bfin_lq035q1_free_ports(info->disp_info->ppi_mode ==
757                                 USE_RGB565_16_BIT_PPI);
758  out6:
759         fb_dealloc_cmap(&fbinfo->cmap);
760  out4:
761         dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
762                           info->dma_handle);
763  out3:
764         framebuffer_release(fbinfo);
765  out2:
766         free_dma(CH_PPI);
767  out1:
768
769         return ret;
770 }
771
772 static int bfin_lq035q1_remove(struct platform_device *pdev)
773 {
774         struct fb_info *fbinfo = platform_get_drvdata(pdev);
775         struct bfin_lq035q1fb_info *info = fbinfo->par;
776
777         if (info->disp_info->use_bl)
778                 gpio_free(info->disp_info->gpio_bl);
779
780         spi_unregister_driver(&info->spidrv);
781
782         unregister_framebuffer(fbinfo);
783
784         free_dma(CH_PPI);
785         free_irq(info->irq, info);
786
787         if (info->fb_buffer != NULL)
788                 dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
789                                   info->dma_handle);
790
791         fb_dealloc_cmap(&fbinfo->cmap);
792
793         bfin_lq035q1_free_ports(info->disp_info->ppi_mode ==
794                                 USE_RGB565_16_BIT_PPI);
795
796         framebuffer_release(fbinfo);
797
798         dev_info(&pdev->dev, "unregistered LCD driver\n");
799
800         return 0;
801 }
802
803 #ifdef CONFIG_PM
804 static int bfin_lq035q1_suspend(struct device *dev)
805 {
806         struct fb_info *fbinfo = dev_get_drvdata(dev);
807         struct bfin_lq035q1fb_info *info = fbinfo->par;
808
809         if (info->lq035_open_cnt) {
810                 lq035q1_backlight(info, 0);
811                 bfin_lq035q1_disable_ppi();
812                 SSYNC();
813                 disable_dma(CH_PPI);
814                 bfin_lq035q1_stop_timers();
815                 bfin_write_PPI_STATUS(-1);
816         }
817
818         return 0;
819 }
820
821 static int bfin_lq035q1_resume(struct device *dev)
822 {
823         struct fb_info *fbinfo = dev_get_drvdata(dev);
824         struct bfin_lq035q1fb_info *info = fbinfo->par;
825
826         if (info->lq035_open_cnt) {
827                 bfin_lq035q1_disable_ppi();
828                 SSYNC();
829
830                 bfin_lq035q1_config_dma(info);
831                 bfin_lq035q1_config_ppi(info);
832                 bfin_lq035q1_init_timers(info);
833
834                 /* start dma */
835                 enable_dma(CH_PPI);
836                 bfin_lq035q1_enable_ppi();
837                 bfin_lq035q1_start_timers();
838                 lq035q1_backlight(info, 1);
839         }
840
841         return 0;
842 }
843
844 static struct dev_pm_ops bfin_lq035q1_dev_pm_ops = {
845         .suspend = bfin_lq035q1_suspend,
846         .resume  = bfin_lq035q1_resume,
847 };
848 #endif
849
850 static struct platform_driver bfin_lq035q1_driver = {
851         .probe   = bfin_lq035q1_probe,
852         .remove  = bfin_lq035q1_remove,
853         .driver = {
854                 .name = DRIVER_NAME,
855 #ifdef CONFIG_PM
856                 .pm   = &bfin_lq035q1_dev_pm_ops,
857 #endif
858         },
859 };
860
861 module_platform_driver(bfin_lq035q1_driver);
862
863 MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
864 MODULE_LICENSE("GPL");