drivers/usb/serial/quatech2.c

   1 /*
   2  * usb-serial driver for Quatech USB 2 devices
   3  *
   4  * Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu)
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License version 2
   8  * as published by the Free Software Foundation.
   9  *
  10  *
  11  *  These devices all have only 1 bulk in and 1 bulk out that is shared
  12  *  for all serial ports.
  13  *
  14  */
  15
  16 #include <asm/unaligned.h>
  17 #include <linux/errno.h>
  18 #include <linux/init.h>
  19 #include <linux/slab.h>
  20 #include <linux/tty.h>
  21 #include <linux/tty_driver.h>
  22 #include <linux/tty_flip.h>
  23 #include <linux/module.h>
  24 #include <linux/serial.h>
  25 #include <linux/usb.h>
  26 #include <linux/usb/serial.h>
  27 #include <linux/serial_reg.h>
  28 #include <linux/uaccess.h>
  29
  30 /* default urb timeout for usb operations */
  31 #define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT
  32
  33 #define QT_OPEN_CLOSE_CHANNEL       0xca
  34 #define QT_SET_GET_DEVICE           0xc2
  35 #define QT_SET_GET_REGISTER         0xc0
  36 #define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
  37 #define QT_SET_ATF                  0xcd
  38 #define QT_TRANSFER_IN              0xc0
  39 #define QT_HW_FLOW_CONTROL_MASK     0xc5
  40 #define QT_SW_FLOW_CONTROL_MASK     0xc6
  41 #define QT2_BREAK_CONTROL           0xc8
  42 #define QT2_GET_SET_UART            0xc1
  43 #define QT2_FLUSH_DEVICE            0xc4
  44 #define QT2_GET_SET_QMCR            0xe1
  45 #define QT2_QMCR_RS232              0x40
  46 #define QT2_QMCR_RS422              0x10
  47
  48 #define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
  49
  50 #define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
  51
  52 /* status bytes for the device */
  53 #define QT2_CONTROL_BYTE    0x1b
  54 #define QT2_LINE_STATUS     0x00  /* following 1 byte is line status */
  55 #define QT2_MODEM_STATUS    0x01  /* following 1 byte is modem status */
  56 #define QT2_XMIT_HOLD       0x02  /* following 2 bytes are ?? */
  57 #define QT2_CHANGE_PORT     0x03  /* following 1 byte is port to change to */
  58 #define QT2_REC_FLUSH       0x04  /* no following info */
  59 #define QT2_XMIT_FLUSH      0x05  /* no following info */
  60 #define QT2_CONTROL_ESCAPE  0xff  /* pass through previous 2 control bytes */
  61
  62 #define  MAX_BAUD_RATE              921600
  63 #define  DEFAULT_BAUD_RATE          9600
  64
  65 #define QT2_WRITE_BUFFER_SIZE   512  /* size of write buffer */
  66 #define QT2_WRITE_CONTROL_SIZE  5    /* control bytes used for a write */
  67
  68 #define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
  69
  70 #define USB_VENDOR_ID_QUATECH   0x061d
  71 #define QUATECH_SSU2_100        0xC120  /* RS232 single port */
  72 #define QUATECH_DSU2_100        0xC140  /* RS232 dual port */
  73 #define QUATECH_DSU2_400        0xC150  /* RS232/422/485 dual port */
  74 #define QUATECH_QSU2_100        0xC160  /* RS232 four port */
  75 #define QUATECH_QSU2_400        0xC170  /* RS232/422/485 four port */
  76 #define QUATECH_ESU2_100        0xC1A0  /* RS232 eight port */
  77 #define QUATECH_ESU2_400        0xC180  /* RS232/422/485 eight port */
  78
  79 struct qt2_device_detail {
  80         int product_id;
  81         int num_ports;
  82 };
  83
  84 #define QT_DETAILS(prod, ports) \
  85         .product_id = (prod),   \
  86         .num_ports = (ports)
  87
  88 static const struct qt2_device_detail qt2_device_details[] = {
  89         {QT_DETAILS(QUATECH_SSU2_100, 1)},
  90         {QT_DETAILS(QUATECH_DSU2_400, 2)},
  91         {QT_DETAILS(QUATECH_DSU2_100, 2)},
  92         {QT_DETAILS(QUATECH_QSU2_400, 4)},
  93         {QT_DETAILS(QUATECH_QSU2_100, 4)},
  94         {QT_DETAILS(QUATECH_ESU2_400, 8)},
  95         {QT_DETAILS(QUATECH_ESU2_100, 8)},
  96         {QT_DETAILS(0, 0)}      /* Terminating entry */
  97 };
  98
  99 static const struct usb_device_id id_table[] = {
 100         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
 101         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
 102         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
 103         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
 104         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
 105         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
 106         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
 107         {}                      /* Terminating entry */
 108 };
 109 MODULE_DEVICE_TABLE(usb, id_table);
 110
 111 struct qt2_serial_private {
 112         unsigned char current_port;  /* current port for incoming data */
 113
 114         struct urb      *read_urb;   /* shared among all ports */
 115         char            read_buffer[512];
 116 };
 117
 118 struct qt2_port_private {
 119         u8   device_port;
 120
 121         spinlock_t urb_lock;
 122         bool       urb_in_use;
 123         struct urb *write_urb;
 124         char       write_buffer[QT2_WRITE_BUFFER_SIZE];
 125
 126         spinlock_t  lock;
 127         u8          shadowLSR;
 128         u8          shadowMSR;
 129
 130         struct usb_serial_port *port;
 131 };
 132
 133 static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch);
 134 static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch);
 135 static void qt2_write_bulk_callback(struct urb *urb);
 136 static void qt2_read_bulk_callback(struct urb *urb);
 137
 138 static void qt2_release(struct usb_serial *serial)
 139 {
 140         struct qt2_serial_private *serial_priv;
 141
 142         serial_priv = usb_get_serial_data(serial);
 143
 144         usb_free_urb(serial_priv->read_urb);
 145         kfree(serial_priv);
 146 }
 147
 148 static inline int calc_baud_divisor(int baudrate)
 149 {
 150         int divisor, rem;
 151
 152         divisor = MAX_BAUD_RATE / baudrate;
 153         rem = MAX_BAUD_RATE % baudrate;
 154         /* Round to nearest divisor */
 155         if (((rem * 2) >= baudrate) && (baudrate != 110))
 156                 divisor++;
 157
 158         return divisor;
 159 }
 160
 161 static inline int qt2_set_port_config(struct usb_device *dev,
 162                                       unsigned char port_number,
 163                                       u16 baudrate, u16 lcr)
 164 {
 165         int divisor = calc_baud_divisor(baudrate);
 166         u16 index = ((u16) (lcr << 8) | (u16) (port_number));
 167
 168         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 169                                QT2_GET_SET_UART, 0x40,
 170                                divisor, index, NULL, 0, QT2_USB_TIMEOUT);
 171 }
 172
 173 static inline int qt2_control_msg(struct usb_device *dev,
 174                                   u8 request, u16 data, u16 index)
 175 {
 176         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 177                                request, 0x40, data, index,
 178                                NULL, 0, QT2_USB_TIMEOUT);
 179 }
 180
 181 static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
 182 {
 183         u16 x = ((u16) (data[1] << 8) | (u16) (data[0]));
 184
 185         return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
 186 }
 187
 188
 189 static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
 190 {
 191         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 192                                QT_SET_GET_DEVICE, 0xc0, 0, 0,
 193                                data, 3, QT2_USB_TIMEOUT);
 194 }
 195
 196 static inline int qt2_getregister(struct usb_device *dev,
 197                                   u8 uart,
 198                                   u8 reg,
 199                                   u8 *data)
 200 {
 201         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 202                                QT_SET_GET_REGISTER, 0xc0, reg,
 203                                uart, data, sizeof(*data), QT2_USB_TIMEOUT);
 204
 205 }
 206
 207 static inline int qt2_setregister(struct usb_device *dev,
 208                                   u8 uart, u8 reg, u16 data)
 209 {
 210         u16 value = (data << 8) | reg;
 211
 212         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 213                                QT_SET_GET_REGISTER, 0x40, value, uart,
 214                                NULL, 0, QT2_USB_TIMEOUT);
 215 }
 216
 217 static inline int update_mctrl(struct qt2_port_private *port_priv,
 218                                unsigned int set, unsigned int clear)
 219 {
 220         struct usb_serial_port *port = port_priv->port;
 221         struct usb_device *dev = port->serial->dev;
 222         unsigned urb_value;
 223         int status;
 224
 225         if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
 226                 dev_dbg(&port->dev,
 227                         "update_mctrl - DTR|RTS not being set|cleared\n");
 228                 return 0;       /* no change */
 229         }
 230
 231         clear &= ~set;  /* 'set' takes precedence over 'clear' */
 232         urb_value = 0;
 233         if (set & TIOCM_DTR)
 234                 urb_value |= UART_MCR_DTR;
 235         if (set & TIOCM_RTS)
 236                 urb_value |= UART_MCR_RTS;
 237
 238         status = qt2_setregister(dev, port_priv->device_port, UART_MCR,
 239                                  urb_value);
 240         if (status < 0)
 241                 dev_err(&port->dev,
 242                         "update_mctrl - Error from MODEM_CTRL urb: %i\n",
 243                         status);
 244         return status;
 245 }
 246
 247 static int qt2_calc_num_ports(struct usb_serial *serial)
 248 {
 249         struct qt2_device_detail d;
 250         int i;
 251
 252         for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) {
 253                 if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
 254                         return d.num_ports;
 255         }
 256
 257         /* we didn't recognize the device */
 258         dev_err(&serial->dev->dev,
 259                  "don't know the number of ports, assuming 1\n");
 260
 261         return 1;
 262 }
 263
 264 static void qt2_set_termios(struct tty_struct *tty,
 265                             struct usb_serial_port *port,
 266                             struct ktermios *old_termios)
 267 {
 268         struct usb_device *dev = port->serial->dev;
 269         struct qt2_port_private *port_priv;
 270         struct ktermios *termios = &tty->termios;
 271         u16 baud;
 272         unsigned int cflag = termios->c_cflag;
 273         u16 new_lcr = 0;
 274         int status;
 275
 276         port_priv = usb_get_serial_port_data(port);
 277
 278         if (cflag & PARENB) {
 279                 if (cflag & PARODD)
 280                         new_lcr |= UART_LCR_PARITY;
 281                 else
 282                         new_lcr |= SERIAL_EVEN_PARITY;
 283         }
 284
 285         switch (cflag & CSIZE) {
 286         case CS5:
 287                 new_lcr |= UART_LCR_WLEN5;
 288                 break;
 289         case CS6:
 290                 new_lcr |= UART_LCR_WLEN6;
 291                 break;
 292         case CS7:
 293                 new_lcr |= UART_LCR_WLEN7;
 294                 break;
 295         default:
 296         case CS8:
 297                 new_lcr |= UART_LCR_WLEN8;
 298                 break;
 299         }
 300
 301         baud = tty_get_baud_rate(tty);
 302         if (!baud)
 303                 baud = 9600;
 304
 305         status = qt2_set_port_config(dev, port_priv->device_port, baud,
 306                                      new_lcr);
 307         if (status < 0)
 308                 dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n",
 309                         __func__, status);
 310
 311         if (cflag & CRTSCTS)
 312                 status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
 313                                          SERIAL_CRTSCTS,
 314                                          port_priv->device_port);
 315         else
 316                 status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
 317                                          0, port_priv->device_port);
 318         if (status < 0)
 319                 dev_err(&port->dev, "%s - set HW flow control failed: %i\n",
 320                         __func__, status);
 321
 322         if (I_IXOFF(tty) || I_IXON(tty)) {
 323                 u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty)));
 324
 325                 status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
 326                                          x, port_priv->device_port);
 327         } else
 328                 status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
 329                                          0, port_priv->device_port);
 330
 331         if (status < 0)
 332                 dev_err(&port->dev, "%s - set SW flow control failed: %i\n",
 333                         __func__, status);
 334
 335 }
 336
 337 static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 338 {
 339         struct usb_serial *serial;
 340         struct qt2_port_private *port_priv;
 341         u8 *data;
 342         u16 device_port;
 343         int status;
 344         unsigned long flags;
 345
 346         device_port = (u16) (port->number - port->serial->minor);
 347
 348         serial = port->serial;
 349
 350         port_priv = usb_get_serial_port_data(port);
 351
 352         /* set the port to RS232 mode */
 353         status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR,
 354                                  QT2_QMCR_RS232, device_port);
 355         if (status < 0) {
 356                 dev_err(&port->dev,
 357                         "%s failed to set RS232 mode for port %i error %i\n",
 358                         __func__, device_port, status);
 359                 return status;
 360         }
 361
 362         data = kzalloc(2, GFP_KERNEL);
 363         if (!data)
 364                 return -ENOMEM;
 365
 366         /* open the port */
 367         status = usb_control_msg(serial->dev,
 368                                  usb_rcvctrlpipe(serial->dev, 0),
 369                                  QT_OPEN_CLOSE_CHANNEL,
 370                                  0xc0, 0,
 371                                  device_port, data, 2, QT2_USB_TIMEOUT);
 372
 373         if (status < 0) {
 374                 dev_err(&port->dev, "%s - open port failed %i", __func__,
 375                         status);
 376                 kfree(data);
 377                 return status;
 378         }
 379
 380         spin_lock_irqsave(&port_priv->lock, flags);
 381         port_priv->shadowLSR = data[0];
 382         port_priv->shadowMSR = data[1];
 383         spin_unlock_irqrestore(&port_priv->lock, flags);
 384
 385         kfree(data);
 386
 387         /* set to default speed and 8bit word size */
 388         status = qt2_set_port_config(serial->dev, device_port,
 389                                      DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
 390         if (status < 0) {
 391                 dev_err(&port->dev,
 392                         "%s - initial setup failed for port %i (%i)\n",
 393                         __func__, port->number, device_port);
 394                 return status;
 395         }
 396
 397         port_priv->device_port = (u8) device_port;
 398
 399         if (tty)
 400                 qt2_set_termios(tty, port, &tty->termios);
 401
 402         return 0;
 403
 404 }
 405
 406 static void qt2_close(struct usb_serial_port *port)
 407 {
 408         struct usb_serial *serial;
 409         struct qt2_port_private *port_priv;
 410         unsigned long flags;
 411         int i;
 412
 413         serial = port->serial;
 414         port_priv = usb_get_serial_port_data(port);
 415
 416         spin_lock_irqsave(&port_priv->urb_lock, flags);
 417         usb_kill_urb(port_priv->write_urb);
 418         port_priv->urb_in_use = false;
 419         spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 420
 421         /* flush the port transmit buffer */
 422         i = usb_control_msg(serial->dev,
 423                             usb_rcvctrlpipe(serial->dev, 0),
 424                             QT2_FLUSH_DEVICE, 0x40, 1,
 425                             port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 426
 427         if (i < 0)
 428                 dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n",
 429                         __func__, i);
 430
 431         /* flush the port receive buffer */
 432         i = usb_control_msg(serial->dev,
 433                             usb_rcvctrlpipe(serial->dev, 0),
 434                             QT2_FLUSH_DEVICE, 0x40, 0,
 435                             port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 436
 437         if (i < 0)
 438                 dev_err(&port->dev, "%s - receive buffer flush failed: %i\n",
 439                         __func__, i);
 440
 441         /* close the port */
 442         i = usb_control_msg(serial->dev,
 443                             usb_sndctrlpipe(serial->dev, 0),
 444                             QT_OPEN_CLOSE_CHANNEL,
 445                             0x40, 0,
 446                             port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 447
 448         if (i < 0)
 449                 dev_err(&port->dev, "%s - close port failed %i\n",
 450                         __func__, i);
 451 }
 452
 453 static void qt2_disconnect(struct usb_serial *serial)
 454 {
 455         struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
 456
 457         usb_kill_urb(serial_priv->read_urb);
 458 }
 459
 460 static int get_serial_info(struct usb_serial_port *port,
 461                            struct serial_struct __user *retinfo)
 462 {
 463         struct serial_struct tmp;
 464
 465         if (!retinfo)
 466                 return -EFAULT;
 467
 468         memset(&tmp, 0, sizeof(tmp));
 469         tmp.line                = port->serial->minor;
 470         tmp.port                = 0;
 471         tmp.irq                 = 0;
 472         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 473         tmp.xmit_fifo_size      = port->bulk_out_size;
 474         tmp.baud_base           = 9600;
 475         tmp.close_delay         = 5*HZ;
 476         tmp.closing_wait        = 30*HZ;
 477
 478         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 479                 return -EFAULT;
 480         return 0;
 481 }
 482
 483 static int qt2_ioctl(struct tty_struct *tty,
 484                      unsigned int cmd, unsigned long arg)
 485 {
 486         struct usb_serial_port *port = tty->driver_data;
 487
 488         switch (cmd) {
 489         case TIOCGSERIAL:
 490                 return get_serial_info(port,
 491                                        (struct serial_struct __user *)arg);
 492         default:
 493                 break;
 494         }
 495
 496         return -ENOIOCTLCMD;
 497 }
 498
 499 static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch)
 500 {
 501         switch (*ch) {
 502         case QT2_LINE_STATUS:
 503                 qt2_update_lsr(port, ch + 1);
 504                 break;
 505         case QT2_MODEM_STATUS:
 506                 qt2_update_msr(port, ch + 1);
 507                 break;
 508         }
 509 }
 510
 511 /* not needed, kept to document functionality */
 512 static void qt2_process_xmit_empty(struct usb_serial_port *port,
 513                                    unsigned char *ch)
 514 {
 515         int bytes_written;
 516
 517         bytes_written = (int)(*ch) + (int)(*(ch + 1) << 4);
 518 }
 519
 520 /* not needed, kept to document functionality */
 521 static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch)
 522 {
 523         return;
 524 }
 525
 526 void qt2_process_read_urb(struct urb *urb)
 527 {
 528         struct usb_serial *serial;
 529         struct qt2_serial_private *serial_priv;
 530         struct usb_serial_port *port;
 531         struct qt2_port_private *port_priv;
 532         bool escapeflag;
 533         unsigned char *ch;
 534         int i;
 535         unsigned char newport;
 536         int len = urb->actual_length;
 537
 538         if (!len)
 539                 return;
 540
 541         ch = urb->transfer_buffer;
 542         serial = urb->context;
 543         serial_priv = usb_get_serial_data(serial);
 544         port = serial->port[serial_priv->current_port];
 545         port_priv = usb_get_serial_port_data(port);
 546
 547         for (i = 0; i < urb->actual_length; i++) {
 548                 ch = (unsigned char *)urb->transfer_buffer + i;
 549                 if ((i <= (len - 3)) &&
 550                     (*ch == QT2_CONTROL_BYTE) &&
 551                     (*(ch + 1) == QT2_CONTROL_BYTE)) {
 552                         escapeflag = false;
 553                         switch (*(ch + 2)) {
 554                         case QT2_LINE_STATUS:
 555                         case QT2_MODEM_STATUS:
 556                                 if (i > (len - 4)) {
 557                                         dev_warn(&port->dev,
 558                                                  "%s - status message too short\n",
 559                                                 __func__);
 560                                         break;
 561                                 }
 562                                 qt2_process_status(port, ch + 2);
 563                                 i += 3;
 564                                 escapeflag = true;
 565                                 break;
 566                         case QT2_XMIT_HOLD:
 567                                 if (i > (len - 5)) {
 568                                         dev_warn(&port->dev,
 569                                                  "%s - xmit_empty message too short\n",
 570                                                  __func__);
 571                                         break;
 572                                 }
 573                                 qt2_process_xmit_empty(port, ch + 3);
 574                                 i += 4;
 575                                 escapeflag = true;
 576                                 break;
 577                         case QT2_CHANGE_PORT:
 578                                 if (i > (len - 4)) {
 579                                         dev_warn(&port->dev,
 580                                                  "%s - change_port message too short\n",
 581                                                  __func__);
 582                                         break;
 583                                 }
 584                                 tty_flip_buffer_push(&port->port);
 585
 586                                 newport = *(ch + 3);
 587
 588                                 if (newport > serial->num_ports) {
 589                                         dev_err(&port->dev,
 590                                                 "%s - port change to invalid port: %i\n",
 591                                                 __func__, newport);
 592                                         break;
 593                                 }
 594
 595                                 serial_priv->current_port = newport;
 596                                 port = serial->port[serial_priv->current_port];
 597                                 port_priv = usb_get_serial_port_data(port);
 598                                 i += 3;
 599                                 escapeflag = true;
 600                                 break;
 601                         case QT2_REC_FLUSH:
 602                         case QT2_XMIT_FLUSH:
 603                                 qt2_process_flush(port, ch + 2);
 604                                 i += 2;
 605                                 escapeflag = true;
 606                                 break;
 607                         case QT2_CONTROL_ESCAPE:
 608                                 tty_buffer_request_room(&port->port, 2);
 609                                 tty_insert_flip_string(&port->port, ch, 2);
 610                                 i += 2;
 611                                 escapeflag = true;
 612                                 break;
 613                         default:
 614                                 dev_warn(&port->dev,
 615                                          "%s - unsupported command %i\n",
 616                                          __func__, *(ch + 2));
 617                                 break;
 618                         }
 619                         if (escapeflag)
 620                                 continue;
 621                 }
 622
 623                 tty_buffer_request_room(&port->port, 1);
 624                 tty_insert_flip_string(&port->port, ch, 1);
 625         }
 626
 627         tty_flip_buffer_push(&port->port);
 628 }
 629
 630 static void qt2_write_bulk_callback(struct urb *urb)
 631 {
 632         struct usb_serial_port *port;
 633         struct qt2_port_private *port_priv;
 634
 635         port = urb->context;
 636         port_priv = usb_get_serial_port_data(port);
 637
 638         spin_lock(&port_priv->urb_lock);
 639
 640         port_priv->urb_in_use = false;
 641         usb_serial_port_softint(port);
 642
 643         spin_unlock(&port_priv->urb_lock);
 644
 645 }
 646
 647 static void qt2_read_bulk_callback(struct urb *urb)
 648 {
 649         struct usb_serial *serial = urb->context;
 650         int status;
 651
 652         if (urb->status) {
 653                 dev_warn(&serial->dev->dev,
 654                          "%s - non-zero urb status: %i\n", __func__,
 655                          urb->status);
 656                 return;
 657         }
 658
 659         qt2_process_read_urb(urb);
 660
 661         status = usb_submit_urb(urb, GFP_ATOMIC);
 662         if (status != 0)
 663                 dev_err(&serial->dev->dev,
 664                         "%s - resubmit read urb failed: %i\n",
 665                         __func__, status);
 666 }
 667
 668 static int qt2_setup_urbs(struct usb_serial *serial)
 669 {
 670         struct usb_serial_port *port0;
 671         struct qt2_serial_private *serial_priv;
 672         int status;
 673
 674         port0 = serial->port[0];
 675
 676         serial_priv = usb_get_serial_data(serial);
 677         serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
 678         if (!serial_priv->read_urb) {
 679                 dev_err(&serial->dev->dev, "No free urbs available\n");
 680                 return -ENOMEM;
 681         }
 682
 683         usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
 684                           usb_rcvbulkpipe(serial->dev,
 685                                           port0->bulk_in_endpointAddress),
 686                           serial_priv->read_buffer,
 687                           sizeof(serial_priv->read_buffer),
 688                           qt2_read_bulk_callback, serial);
 689
 690         status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
 691         if (status != 0) {
 692                 dev_err(&serial->dev->dev,
 693                         "%s - submit read urb failed %i\n", __func__, status);
 694                 usb_free_urb(serial_priv->read_urb);
 695                 return status;
 696         }
 697
 698         return 0;
 699 }
 700
 701 static int qt2_attach(struct usb_serial *serial)
 702 {
 703         struct qt2_serial_private *serial_priv;
 704         int status;
 705
 706         /* power on unit */
 707         status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 708                                  0xc2, 0x40, 0x8000, 0, NULL, 0,
 709                                  QT2_USB_TIMEOUT);
 710         if (status < 0) {
 711                 dev_err(&serial->dev->dev,
 712                         "%s - failed to power on unit: %i\n", __func__, status);
 713                 return status;
 714         }
 715
 716         serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
 717         if (!serial_priv) {
 718                 dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
 719                 return -ENOMEM;
 720         }
 721
 722         usb_set_serial_data(serial, serial_priv);
 723
 724         status = qt2_setup_urbs(serial);
 725         if (status != 0)
 726                 goto attach_failed;
 727
 728         return 0;
 729
 730 attach_failed:
 731         kfree(serial_priv);
 732         return status;
 733 }
 734
 735 static int qt2_port_probe(struct usb_serial_port *port)
 736 {
 737         struct usb_serial *serial = port->serial;
 738         struct qt2_port_private *port_priv;
 739         u8 bEndpointAddress;
 740
 741         port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
 742         if (!port_priv)
 743                 return -ENOMEM;
 744
 745         spin_lock_init(&port_priv->lock);
 746         spin_lock_init(&port_priv->urb_lock);
 747         port_priv->port = port;
 748
 749         port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 750         if (!port_priv->write_urb) {
 751                 kfree(port_priv);
 752                 return -ENOMEM;
 753         }
 754         bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
 755         usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
 756                                 usb_sndbulkpipe(serial->dev, bEndpointAddress),
 757                                 port_priv->write_buffer,
 758                                 sizeof(port_priv->write_buffer),
 759                                 qt2_write_bulk_callback, port);
 760
 761         usb_set_serial_port_data(port, port_priv);
 762
 763         return 0;
 764 }
 765
 766 static int qt2_port_remove(struct usb_serial_port *port)
 767 {
 768         struct qt2_port_private *port_priv;
 769
 770         port_priv = usb_get_serial_port_data(port);
 771         usb_free_urb(port_priv->write_urb);
 772         kfree(port_priv);
 773
 774         return 0;
 775 }
 776
 777 static int qt2_tiocmget(struct tty_struct *tty)
 778 {
 779         struct usb_serial_port *port = tty->driver_data;
 780         struct usb_device *dev = port->serial->dev;
 781         struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
 782         u8 *d;
 783         int r;
 784
 785         d = kzalloc(2, GFP_KERNEL);
 786         if (!d)
 787                 return -ENOMEM;
 788
 789         r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d);
 790         if (r < 0)
 791                 goto mget_out;
 792
 793         r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1);
 794         if (r < 0)
 795                 goto mget_out;
 796
 797         r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
 798             (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
 799             (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
 800             (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
 801             (d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
 802             (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
 803
 804 mget_out:
 805         kfree(d);
 806         return r;
 807 }
 808
 809 static int qt2_tiocmset(struct tty_struct *tty,
 810                         unsigned int set, unsigned int clear)
 811 {
 812         struct qt2_port_private *port_priv;
 813
 814         port_priv = usb_get_serial_port_data(tty->driver_data);
 815         return update_mctrl(port_priv, set, clear);
 816 }
 817
 818 static void qt2_break_ctl(struct tty_struct *tty, int break_state)
 819 {
 820         struct usb_serial_port *port = tty->driver_data;
 821         struct qt2_port_private *port_priv;
 822         int status;
 823         u16 val;
 824
 825         port_priv = usb_get_serial_port_data(port);
 826
 827         val = (break_state == -1) ? 1 : 0;
 828
 829         status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL,
 830                                  val, port_priv->device_port);
 831         if (status < 0)
 832                 dev_warn(&port->dev,
 833                          "%s - failed to send control message: %i\n", __func__,
 834                          status);
 835 }
 836
 837
 838
 839 static void qt2_dtr_rts(struct usb_serial_port *port, int on)
 840 {
 841         struct usb_device *dev = port->serial->dev;
 842         struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
 843
 844         /* Disable flow control */
 845         if (!on) {
 846                 if (qt2_setregister(dev, port_priv->device_port,
 847                                            UART_MCR, 0) < 0)
 848                         dev_warn(&port->dev, "error from flowcontrol urb\n");
 849         }
 850         /* drop RTS and DTR */
 851         if (on)
 852                 update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0);
 853         else
 854                 update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS);
 855 }
 856
 857 static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
 858 {
 859         struct qt2_port_private *port_priv;
 860         u8 newMSR = (u8) *ch;
 861         unsigned long flags;
 862
 863         port_priv = usb_get_serial_port_data(port);
 864
 865         spin_lock_irqsave(&port_priv->lock, flags);
 866         port_priv->shadowMSR = newMSR;
 867         spin_unlock_irqrestore(&port_priv->lock, flags);
 868
 869         if (newMSR & UART_MSR_ANY_DELTA) {
 870                 /* update input line counters */
 871                 if (newMSR & UART_MSR_DCTS)
 872                         port->icount.cts++;
 873                 if (newMSR & UART_MSR_DDSR)
 874                         port->icount.dsr++;
 875                 if (newMSR & UART_MSR_DDCD)
 876                         port->icount.dcd++;
 877                 if (newMSR & UART_MSR_TERI)
 878                         port->icount.rng++;
 879
 880                 wake_up_interruptible(&port->port.delta_msr_wait);
 881         }
 882 }
 883
 884 static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
 885 {
 886         struct qt2_port_private *port_priv;
 887         struct async_icount *icount;
 888         unsigned long flags;
 889         u8 newLSR = (u8) *ch;
 890
 891         port_priv = usb_get_serial_port_data(port);
 892
 893         if (newLSR & UART_LSR_BI)
 894                 newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
 895
 896         spin_lock_irqsave(&port_priv->lock, flags);
 897         port_priv->shadowLSR = newLSR;
 898         spin_unlock_irqrestore(&port_priv->lock, flags);
 899
 900         icount = &port->icount;
 901
 902         if (newLSR & UART_LSR_BRK_ERROR_BITS) {
 903
 904                 if (newLSR & UART_LSR_BI)
 905                         icount->brk++;
 906
 907                 if (newLSR & UART_LSR_OE)
 908                         icount->overrun++;
 909
 910                 if (newLSR & UART_LSR_PE)
 911                         icount->parity++;
 912
 913                 if (newLSR & UART_LSR_FE)
 914                         icount->frame++;
 915         }
 916
 917 }
 918
 919 static int qt2_write_room(struct tty_struct *tty)
 920 {
 921         struct usb_serial_port *port = tty->driver_data;
 922         struct qt2_port_private *port_priv;
 923         unsigned long flags = 0;
 924         int r;
 925
 926         port_priv = usb_get_serial_port_data(port);
 927
 928         spin_lock_irqsave(&port_priv->urb_lock, flags);
 929
 930         if (port_priv->urb_in_use)
 931                 r = 0;
 932         else
 933                 r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE;
 934
 935         spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 936
 937         return r;
 938 }
 939
 940 static int qt2_write(struct tty_struct *tty,
 941                      struct usb_serial_port *port,
 942                      const unsigned char *buf, int count)
 943 {
 944         struct qt2_port_private *port_priv;
 945         struct urb *write_urb;
 946         unsigned char *data;
 947         unsigned long flags;
 948         int status;
 949         int bytes_out = 0;
 950
 951         port_priv = usb_get_serial_port_data(port);
 952
 953         if (port_priv->write_urb == NULL) {
 954                 dev_err(&port->dev, "%s - no output urb\n", __func__);
 955                 return 0;
 956         }
 957         write_urb = port_priv->write_urb;
 958
 959         count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE);
 960
 961         data = write_urb->transfer_buffer;
 962         spin_lock_irqsave(&port_priv->urb_lock, flags);
 963         if (port_priv->urb_in_use == true) {
 964                 dev_err(&port->dev, "qt2_write - urb is in use\n");
 965                 goto write_out;
 966         }
 967
 968         *data++ = QT2_CONTROL_BYTE;
 969         *data++ = QT2_CONTROL_BYTE;
 970         *data++ = port_priv->device_port;
 971         put_unaligned_le16(count, data);
 972         data += 2;
 973         memcpy(data, buf, count);
 974
 975         write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE;
 976
 977         status = usb_submit_urb(write_urb, GFP_ATOMIC);
 978         if (status == 0) {
 979                 port_priv->urb_in_use = true;
 980                 bytes_out += count;
 981         }
 982
 983 write_out:
 984         spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 985         return bytes_out;
 986 }
 987
 988
 989 static struct usb_serial_driver qt2_device = {
 990         .driver = {
 991                 .owner = THIS_MODULE,
 992                 .name = "quatech-serial",
 993         },
 994         .description         = DRIVER_DESC,
 995         .id_table            = id_table,
 996         .open                = qt2_open,
 997         .close               = qt2_close,
 998         .write               = qt2_write,
 999         .write_room          = qt2_write_room,
1000         .calc_num_ports      = qt2_calc_num_ports,
1001         .attach              = qt2_attach,
1002         .release             = qt2_release,
1003         .disconnect          = qt2_disconnect,
1004         .port_probe          = qt2_port_probe,
1005         .port_remove         = qt2_port_remove,
1006         .dtr_rts             = qt2_dtr_rts,
1007         .break_ctl           = qt2_break_ctl,
1008         .tiocmget            = qt2_tiocmget,
1009         .tiocmset            = qt2_tiocmset,
1010         .tiocmiwait          = usb_serial_generic_tiocmiwait,
1011         .get_icount          = usb_serial_generic_get_icount,
1012         .ioctl               = qt2_ioctl,
1013         .set_termios         = qt2_set_termios,
1014 };
1015
1016 static struct usb_serial_driver *const serial_drivers[] = {
1017         &qt2_device, NULL
1018 };
1019
1020 module_usb_serial_driver(serial_drivers, id_table);
1021
1022 MODULE_DESCRIPTION(DRIVER_DESC);
1023 MODULE_LICENSE("GPL");