2 * Edgeport USB Serial Converter driver
4 * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved.
5 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * Supports the following devices:
13 * EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT
15 * For questions or problems with this driver, contact Inside Out
16 * Networks technical support, or Peter Berger <pberger@brimson.com>,
17 * or Al Borchers <alborchers@steinerpoint.com>.
20 #include <linux/kernel.h>
21 #include <linux/jiffies.h>
22 #include <linux/errno.h>
23 #include <linux/init.h>
24 #include <linux/slab.h>
25 #include <linux/tty.h>
26 #include <linux/tty_driver.h>
27 #include <linux/tty_flip.h>
28 #include <linux/module.h>
29 #include <linux/spinlock.h>
30 #include <linux/mutex.h>
31 #include <linux/serial.h>
32 #include <linux/kfifo.h>
33 #include <linux/ioctl.h>
34 #include <linux/firmware.h>
35 #include <linux/uaccess.h>
36 #include <linux/usb.h>
37 #include <linux/usb/serial.h>
40 #include "io_usbvend.h"
43 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
44 #define DRIVER_DESC "Edgeport USB Serial Driver"
46 #define EPROM_PAGE_SIZE 64
49 /* different hardware types */
50 #define HARDWARE_TYPE_930 0
51 #define HARDWARE_TYPE_TIUMP 1
53 /* IOCTL_PRIVATE_TI_GET_MODE Definitions */
54 #define TI_MODE_CONFIGURING 0 /* Device has not entered start device */
55 #define TI_MODE_BOOT 1 /* Staying in boot mode */
56 #define TI_MODE_DOWNLOAD 2 /* Made it to download mode */
57 #define TI_MODE_TRANSITIONING 3 /* Currently in boot mode but
58 transitioning to download mode */
61 #define EDGE_READ_URB_RUNNING 0
62 #define EDGE_READ_URB_STOPPING 1
63 #define EDGE_READ_URB_STOPPED 2
65 #define EDGE_CLOSING_WAIT 4000 /* in .01 sec */
67 #define EDGE_OUT_BUF_SIZE 1024
70 /* Product information read from the Edgeport */
72 int TiMode; /* Current TI Mode */
73 __u8 hardware_type; /* Type of hardware */
74 } __attribute__((packed));
76 struct edgeport_port {
83 __u32 ump_read_timeout; /* Number of milliseconds the UMP will
84 wait without data before completing
90 struct edgeport_serial *edge_serial;
91 struct usb_serial_port *port;
92 __u8 bUartMode; /* Port type, 0: RS232, etc. */
94 int ep_read_urb_state;
95 int ep_write_urb_in_use;
96 struct kfifo write_fifo;
99 struct edgeport_serial {
100 struct product_info product_info;
101 u8 TI_I2C_Type; /* Type of I2C in UMP */
102 u8 TiReadI2C; /* Set to TRUE if we have read the
104 struct mutex es_lock;
106 struct usb_serial *serial;
110 /* Devices that this driver supports */
111 static const struct usb_device_id edgeport_1port_id_table[] = {
112 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
113 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
114 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
115 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
116 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
117 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
118 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
119 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
120 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
121 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
122 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
123 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
124 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
125 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
126 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
127 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
131 static const struct usb_device_id edgeport_2port_id_table[] = {
132 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
133 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
134 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
135 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
136 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
137 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
138 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
139 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
140 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
141 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
142 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
143 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
144 /* The 4, 8 and 16 port devices show up as multiple 2 port devices */
145 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
146 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
147 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
148 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
149 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
153 /* Devices that this driver supports */
154 static const struct usb_device_id id_table_combined[] = {
155 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
156 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
157 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
158 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
159 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
160 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
161 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
162 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
163 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
164 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
165 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
166 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
167 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
168 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
169 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
170 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
171 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
172 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
173 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
174 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
175 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
176 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
177 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
178 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
179 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
180 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
181 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
182 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
183 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
184 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
185 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
186 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
187 { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
191 MODULE_DEVICE_TABLE(usb, id_table_combined);
193 static unsigned char OperationalMajorVersion;
194 static unsigned char OperationalMinorVersion;
195 static unsigned short OperationalBuildNumber;
197 static int closing_wait = EDGE_CLOSING_WAIT;
198 static bool ignore_cpu_rev;
199 static int default_uart_mode; /* RS232 */
201 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
204 static void stop_read(struct edgeport_port *edge_port);
205 static int restart_read(struct edgeport_port *edge_port);
207 static void edge_set_termios(struct tty_struct *tty,
208 struct usb_serial_port *port, struct ktermios *old_termios);
209 static void edge_send(struct usb_serial_port *port, struct tty_struct *tty);
211 /* sysfs attributes */
212 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
213 static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
216 static int ti_vread_sync(struct usb_device *dev, __u8 request,
217 __u16 value, __u16 index, u8 *data, int size)
221 status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
222 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
223 value, index, data, size, 1000);
226 if (status != size) {
227 dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n",
228 __func__, size, status);
234 static int ti_vsend_sync(struct usb_device *dev, __u8 request,
235 __u16 value, __u16 index, u8 *data, int size)
239 status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
240 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
241 value, index, data, size, 1000);
244 if (status != size) {
245 dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n",
246 __func__, size, status);
252 static int send_cmd(struct usb_device *dev, __u8 command,
253 __u8 moduleid, __u16 value, u8 *data,
256 return ti_vsend_sync(dev, command, value, moduleid, data, size);
259 /* clear tx/rx buffers and fifo in TI UMP */
260 static int purge_port(struct usb_serial_port *port, __u16 mask)
262 int port_number = port->number - port->serial->minor;
264 dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask);
266 return send_cmd(port->serial->dev,
268 (__u8)(UMPM_UART1_PORT + port_number),
275 * read_download_mem - Read edgeport memory from TI chip
276 * @dev: usb device pointer
277 * @start_address: Device CPU address at which to read
278 * @length: Length of above data
279 * @address_type: Can read both XDATA and I2C
280 * @buffer: pointer to input data buffer
282 static int read_download_mem(struct usb_device *dev, int start_address,
283 int length, __u8 address_type, __u8 *buffer)
287 __be16 be_start_address;
289 dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
291 /* Read in blocks of 64 bytes
292 * (TI firmware can't handle more than 64 byte reads)
298 read_length = (__u8)length;
300 if (read_length > 1) {
301 dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
303 be_start_address = cpu_to_be16(start_address);
304 status = ti_vread_sync(dev, UMPC_MEMORY_READ,
306 (__force __u16)be_start_address,
307 buffer, read_length);
310 dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status);
315 usb_serial_debug_data(&dev->dev, __func__, read_length, buffer);
317 /* Update pointers/length */
318 start_address += read_length;
319 buffer += read_length;
320 length -= read_length;
326 static int read_ram(struct usb_device *dev, int start_address,
327 int length, __u8 *buffer)
329 return read_download_mem(dev, start_address, length,
330 DTK_ADDR_SPACE_XDATA, buffer);
333 /* Read edgeport memory to a given block */
334 static int read_boot_mem(struct edgeport_serial *serial,
335 int start_address, int length, __u8 *buffer)
340 for (i = 0; i < length; i++) {
341 status = ti_vread_sync(serial->serial->dev,
342 UMPC_MEMORY_READ, serial->TI_I2C_Type,
343 (__u16)(start_address+i), &buffer[i], 0x01);
345 dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status);
350 dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n",
351 __func__, start_address, length);
352 usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
354 serial->TiReadI2C = 1;
359 /* Write given block to TI EPROM memory */
360 static int write_boot_mem(struct edgeport_serial *serial,
361 int start_address, int length, __u8 *buffer)
367 /* Must do a read before write */
368 if (!serial->TiReadI2C) {
369 temp = kmalloc(1, GFP_KERNEL);
371 dev_err(&serial->serial->dev->dev,
372 "%s - out of memory\n", __func__);
375 status = read_boot_mem(serial, 0, 1, temp);
381 for (i = 0; i < length; ++i) {
382 status = ti_vsend_sync(serial->serial->dev,
383 UMPC_MEMORY_WRITE, buffer[i],
384 (__u16)(i + start_address), NULL, 0);
389 dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length);
390 usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
396 /* Write edgeport I2C memory to TI chip */
397 static int write_i2c_mem(struct edgeport_serial *serial,
398 int start_address, int length, __u8 address_type, __u8 *buffer)
400 struct device *dev = &serial->serial->dev->dev;
403 __be16 be_start_address;
405 /* We can only send a maximum of 1 aligned byte page at a time */
407 /* calculate the number of bytes left in the first page */
408 write_length = EPROM_PAGE_SIZE -
409 (start_address & (EPROM_PAGE_SIZE - 1));
411 if (write_length > length)
412 write_length = length;
414 dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n",
415 __func__, start_address, write_length);
416 usb_serial_debug_data(dev, __func__, write_length, buffer);
418 /* Write first page */
419 be_start_address = cpu_to_be16(start_address);
420 status = ti_vsend_sync(serial->serial->dev,
421 UMPC_MEMORY_WRITE, (__u16)address_type,
422 (__force __u16)be_start_address,
423 buffer, write_length);
425 dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
429 length -= write_length;
430 start_address += write_length;
431 buffer += write_length;
433 /* We should be aligned now -- can write
434 max page size bytes at a time */
436 if (length > EPROM_PAGE_SIZE)
437 write_length = EPROM_PAGE_SIZE;
439 write_length = length;
441 dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n",
442 __func__, start_address, write_length);
443 usb_serial_debug_data(dev, __func__, write_length, buffer);
445 /* Write next page */
446 be_start_address = cpu_to_be16(start_address);
447 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
449 (__force __u16)be_start_address,
450 buffer, write_length);
452 dev_err(dev, "%s - ERROR %d\n", __func__, status);
456 length -= write_length;
457 start_address += write_length;
458 buffer += write_length;
463 /* Examine the UMP DMA registers and LSR
465 * Check the MSBit of the X and Y DMA byte count registers.
466 * A zero in this bit indicates that the TX DMA buffers are empty
467 * then check the TX Empty bit in the UART.
469 static int tx_active(struct edgeport_port *port)
472 struct out_endpoint_desc_block *oedb;
476 oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
478 dev_err(&port->port->dev, "%s - out of memory\n", __func__);
482 lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte,
483 as not all platforms can do DMA
489 /* Read the DMA Count Registers */
490 status = read_ram(port->port->serial->dev, port->dma_address,
491 sizeof(*oedb), (void *)oedb);
493 goto exit_is_tx_active;
495 dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount);
498 status = read_ram(port->port->serial->dev,
499 port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr);
502 goto exit_is_tx_active;
503 dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr);
505 /* If either buffer has data or we are transmitting then return TRUE */
506 if ((oedb->XByteCount & 0x80) != 0)
509 if ((*lsr & UMP_UART_LSR_TX_MASK) == 0)
512 /* We return Not Active if we get any kind of error */
514 dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left);
521 static int choose_config(struct usb_device *dev)
524 * There may be multiple configurations on this device, in which case
525 * we would need to read and parse all of them to find out which one
526 * we want. However, we just support one config at this point,
527 * configuration # 1, which is Config Descriptor 0.
530 dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n",
531 __func__, dev->config->desc.bNumInterfaces);
532 dev_dbg(&dev->dev, "%s - MAX Power = %d\n",
533 __func__, dev->config->desc.bMaxPower * 2);
535 if (dev->config->desc.bNumInterfaces != 1) {
536 dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
543 static int read_rom(struct edgeport_serial *serial,
544 int start_address, int length, __u8 *buffer)
548 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
549 status = read_download_mem(serial->serial->dev,
555 status = read_boot_mem(serial, start_address, length,
561 static int write_rom(struct edgeport_serial *serial, int start_address,
562 int length, __u8 *buffer)
564 if (serial->product_info.TiMode == TI_MODE_BOOT)
565 return write_boot_mem(serial, start_address, length,
568 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD)
569 return write_i2c_mem(serial, start_address, length,
570 serial->TI_I2C_Type, buffer);
576 /* Read a descriptor header from I2C based on type */
577 static int get_descriptor_addr(struct edgeport_serial *serial,
578 int desc_type, struct ti_i2c_desc *rom_desc)
583 /* Search for requested descriptor in I2C */
586 status = read_rom(serial,
588 sizeof(struct ti_i2c_desc),
593 if (rom_desc->Type == desc_type)
594 return start_address;
596 start_address = start_address + sizeof(struct ti_i2c_desc)
599 } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
604 /* Validate descriptor checksum */
605 static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer)
610 for (i = 0; i < rom_desc->Size; i++)
611 cs = (__u8)(cs + buffer[i]);
613 if (cs != rom_desc->CheckSum) {
614 pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
620 /* Make sure that the I2C image is good */
621 static int check_i2c_image(struct edgeport_serial *serial)
623 struct device *dev = &serial->serial->dev->dev;
625 struct ti_i2c_desc *rom_desc;
626 int start_address = 2;
630 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
632 dev_err(dev, "%s - out of memory\n", __func__);
635 buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
637 dev_err(dev, "%s - out of memory when allocating buffer\n",
643 /* Read the first byte (Signature0) must be 0x52 or 0x10 */
644 status = read_rom(serial, 0, 1, buffer);
648 if (*buffer != UMP5152 && *buffer != UMP3410) {
649 dev_err(dev, "%s - invalid buffer signature\n", __func__);
655 /* Validate the I2C */
656 status = read_rom(serial,
658 sizeof(struct ti_i2c_desc),
663 if ((start_address + sizeof(struct ti_i2c_desc) +
664 rom_desc->Size) > TI_MAX_I2C_SIZE) {
666 dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
670 dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type);
672 /* Skip type 2 record */
673 ttype = rom_desc->Type & 0x0f;
674 if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
675 && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) {
676 /* Read the descriptor data */
677 status = read_rom(serial, start_address +
678 sizeof(struct ti_i2c_desc),
679 rom_desc->Size, buffer);
683 status = valid_csum(rom_desc, buffer);
687 start_address = start_address + sizeof(struct ti_i2c_desc) +
690 } while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
691 (start_address < TI_MAX_I2C_SIZE));
693 if ((rom_desc->Type != I2C_DESC_TYPE_ION) ||
694 (start_address > TI_MAX_I2C_SIZE))
703 static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
707 struct ti_i2c_desc *rom_desc;
708 struct edge_ti_manuf_descriptor *desc;
709 struct device *dev = &serial->serial->dev->dev;
711 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
713 dev_err(dev, "%s - out of memory\n", __func__);
716 start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
719 if (!start_address) {
720 dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__);
725 /* Read the descriptor data */
726 status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
727 rom_desc->Size, buffer);
731 status = valid_csum(rom_desc, buffer);
733 desc = (struct edge_ti_manuf_descriptor *)buffer;
734 dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig);
735 dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version);
736 dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev);
737 dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts);
738 dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts);
739 dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts);
746 /* Build firmware header used for firmware update */
747 static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
754 struct ti_i2c_desc *i2c_header;
755 struct ti_i2c_image_header *img_header;
756 struct ti_i2c_firmware_rec *firmware_rec;
757 const struct firmware *fw;
758 const char *fw_name = "edgeport/down3.bin";
760 /* In order to update the I2C firmware we must change the type 2 record
761 * to type 0xF2. This will force the UMP to come up in Boot Mode.
762 * Then while in boot mode, the driver will download the latest
763 * firmware (padded to 15.5k) into the UMP ram. And finally when the
764 * device comes back up in download mode the driver will cause the new
765 * firmware to be copied from the UMP Ram to I2C and the firmware will
766 * update the record type from 0xf2 to 0x02.
769 /* Allocate a 15.5k buffer + 2 bytes for version number
770 * (Firmware Record) */
771 buffer_size = (((1024 * 16) - 512 ) +
772 sizeof(struct ti_i2c_firmware_rec));
774 buffer = kmalloc(buffer_size, GFP_KERNEL);
776 dev_err(dev, "%s - out of memory\n", __func__);
780 // Set entire image of 0xffs
781 memset(buffer, 0xff, buffer_size);
783 err = request_firmware(&fw, fw_name, dev);
785 dev_err(dev, "Failed to load image \"%s\" err %d\n",
791 /* Save Download Version Number */
792 OperationalMajorVersion = fw->data[0];
793 OperationalMinorVersion = fw->data[1];
794 OperationalBuildNumber = fw->data[2] | (fw->data[3] << 8);
796 /* Copy version number into firmware record */
797 firmware_rec = (struct ti_i2c_firmware_rec *)buffer;
799 firmware_rec->Ver_Major = OperationalMajorVersion;
800 firmware_rec->Ver_Minor = OperationalMinorVersion;
802 /* Pointer to fw_down memory image */
803 img_header = (struct ti_i2c_image_header *)&fw->data[4];
805 memcpy(buffer + sizeof(struct ti_i2c_firmware_rec),
806 &fw->data[4 + sizeof(struct ti_i2c_image_header)],
807 le16_to_cpu(img_header->Length));
809 release_firmware(fw);
811 for (i=0; i < buffer_size; i++) {
812 cs = (__u8)(cs + buffer[i]);
817 /* Build new header */
818 i2c_header = (struct ti_i2c_desc *)header;
819 firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data;
821 i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK;
822 i2c_header->Size = (__u16)buffer_size;
823 i2c_header->CheckSum = cs;
824 firmware_rec->Ver_Major = OperationalMajorVersion;
825 firmware_rec->Ver_Minor = OperationalMinorVersion;
830 /* Try to figure out what type of I2c we have */
831 static int i2c_type_bootmode(struct edgeport_serial *serial)
833 struct device *dev = &serial->serial->dev->dev;
837 data = kmalloc(1, GFP_KERNEL);
839 dev_err(dev, "%s - out of memory\n", __func__);
843 /* Try to read type 2 */
844 status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
845 DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
847 dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status);
849 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
850 if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
851 dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__);
852 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
856 /* Try to read type 3 */
857 status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
858 DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01);
860 dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status);
862 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
863 if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
864 dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__);
865 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
869 dev_dbg(dev, "%s - Unknown\n", __func__);
870 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
877 static int bulk_xfer(struct usb_serial *serial, void *buffer,
878 int length, int *num_sent)
882 status = usb_bulk_msg(serial->dev,
883 usb_sndbulkpipe(serial->dev,
884 serial->port[0]->bulk_out_endpointAddress),
885 buffer, length, num_sent, 1000);
889 /* Download given firmware image to the device (IN BOOT MODE) */
890 static int download_code(struct edgeport_serial *serial, __u8 *image,
898 /* Transfer firmware image */
899 for (pos = 0; pos < image_length; ) {
900 /* Read the next buffer from file */
901 transfer = image_length - pos;
902 if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE)
903 transfer = EDGE_FW_BULK_MAX_PACKET_SIZE;
906 status = bulk_xfer(serial->serial, &image[pos],
910 /* Advance buffer pointer */
918 static int config_boot_dev(struct usb_device *dev)
923 static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc)
925 return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev);
929 * DownloadTIFirmware - Download run-time operating firmware to the TI5052
931 * This routine downloads the main operating code into the TI5052, using the
932 * boot code already burned into E2PROM or ROM.
934 static int download_fw(struct edgeport_serial *serial)
936 struct device *dev = &serial->serial->dev->dev;
939 struct edge_ti_manuf_descriptor *ti_manuf_desc;
940 struct usb_interface_descriptor *interface;
941 int download_cur_ver;
942 int download_new_ver;
944 /* This routine is entered by both the BOOT mode and the Download mode
945 * We can determine which code is running by the reading the config
946 * descriptor and if we have only one bulk pipe it is in boot mode
948 serial->product_info.hardware_type = HARDWARE_TYPE_TIUMP;
950 /* Default to type 2 i2c */
951 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
953 status = choose_config(serial->serial->dev);
957 interface = &serial->serial->interface->cur_altsetting->desc;
959 dev_err(dev, "%s - no interface set, error!\n", __func__);
964 * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
965 * if we have more than one endpoint we are definitely in download
968 if (interface->bNumEndpoints > 1)
969 serial->product_info.TiMode = TI_MODE_DOWNLOAD;
971 /* Otherwise we will remain in configuring mode */
972 serial->product_info.TiMode = TI_MODE_CONFIGURING;
974 /********************************************************************/
976 /********************************************************************/
977 if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
978 struct ti_i2c_desc *rom_desc;
980 dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__);
982 status = check_i2c_image(serial);
984 dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__);
988 /* Validate Hardware version number
989 * Read Manufacturing Descriptor from TI Based Edgeport
991 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
992 if (!ti_manuf_desc) {
993 dev_err(dev, "%s - out of memory.\n", __func__);
996 status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
998 kfree(ti_manuf_desc);
1002 /* Check version number of ION descriptor */
1003 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1004 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
1005 __func__, ti_cpu_rev(ti_manuf_desc));
1006 kfree(ti_manuf_desc);
1010 rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
1012 dev_err(dev, "%s - out of memory.\n", __func__);
1013 kfree(ti_manuf_desc);
1017 /* Search for type 2 record (firmware record) */
1018 start_address = get_descriptor_addr(serial,
1019 I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
1020 if (start_address != 0) {
1021 struct ti_i2c_firmware_rec *firmware_version;
1024 dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__);
1026 firmware_version = kmalloc(sizeof(*firmware_version),
1028 if (!firmware_version) {
1029 dev_err(dev, "%s - out of memory.\n", __func__);
1031 kfree(ti_manuf_desc);
1035 /* Validate version number
1036 * Read the descriptor data
1038 status = read_rom(serial, start_address +
1039 sizeof(struct ti_i2c_desc),
1040 sizeof(struct ti_i2c_firmware_rec),
1041 (__u8 *)firmware_version);
1043 kfree(firmware_version);
1045 kfree(ti_manuf_desc);
1049 /* Check version number of download with current
1051 download_cur_ver = (firmware_version->Ver_Major << 8) +
1052 (firmware_version->Ver_Minor);
1053 download_new_ver = (OperationalMajorVersion << 8) +
1054 (OperationalMinorVersion);
1056 dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n",
1057 __func__, firmware_version->Ver_Major,
1058 firmware_version->Ver_Minor,
1059 OperationalMajorVersion,
1060 OperationalMinorVersion);
1062 /* Check if we have an old version in the I2C and
1063 update if necessary */
1064 if (download_cur_ver < download_new_ver) {
1065 dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n",
1067 firmware_version->Ver_Major,
1068 firmware_version->Ver_Minor,
1069 OperationalMajorVersion,
1070 OperationalMinorVersion);
1072 record = kmalloc(1, GFP_KERNEL);
1074 dev_err(dev, "%s - out of memory.\n",
1076 kfree(firmware_version);
1078 kfree(ti_manuf_desc);
1081 /* In order to update the I2C firmware we must
1082 * change the type 2 record to type 0xF2. This
1083 * will force the UMP to come up in Boot Mode.
1084 * Then while in boot mode, the driver will
1085 * download the latest firmware (padded to
1086 * 15.5k) into the UMP ram. Finally when the
1087 * device comes back up in download mode the
1088 * driver will cause the new firmware to be
1089 * copied from the UMP Ram to I2C and the
1090 * firmware will update the record type from
1093 *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
1095 /* Change the I2C Firmware record type to
1096 0xf2 to trigger an update */
1097 status = write_rom(serial, start_address,
1098 sizeof(*record), record);
1101 kfree(firmware_version);
1103 kfree(ti_manuf_desc);
1107 /* verify the write -- must do this in order
1108 * for write to complete before we do the
1111 status = read_rom(serial,
1117 kfree(firmware_version);
1119 kfree(ti_manuf_desc);
1123 if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
1124 dev_err(dev, "%s - error resetting device\n", __func__);
1126 kfree(firmware_version);
1128 kfree(ti_manuf_desc);
1132 dev_dbg(dev, "%s - HARDWARE RESET\n", __func__);
1134 /* Reset UMP -- Back to BOOT MODE */
1135 status = ti_vsend_sync(serial->serial->dev,
1136 UMPC_HARDWARE_RESET,
1139 dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status);
1141 /* return an error on purpose. */
1143 kfree(firmware_version);
1145 kfree(ti_manuf_desc);
1148 kfree(firmware_version);
1150 /* Search for type 0xF2 record (firmware blank record) */
1151 else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) {
1152 #define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \
1153 sizeof(struct ti_i2c_firmware_rec))
1157 header = kmalloc(HEADER_SIZE, GFP_KERNEL);
1159 dev_err(dev, "%s - out of memory.\n", __func__);
1161 kfree(ti_manuf_desc);
1165 vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
1167 dev_err(dev, "%s - out of memory.\n", __func__);
1170 kfree(ti_manuf_desc);
1174 dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__);
1177 * In order to update the I2C firmware we must change
1178 * the type 2 record to type 0xF2. This will force the
1179 * UMP to come up in Boot Mode. Then while in boot
1180 * mode, the driver will download the latest firmware
1181 * (padded to 15.5k) into the UMP ram. Finally when the
1182 * device comes back up in download mode the driver
1183 * will cause the new firmware to be copied from the
1184 * UMP Ram to I2C and the firmware will update the
1185 * record type from 0xf2 to 0x02.
1187 status = build_i2c_fw_hdr(header, dev);
1192 kfree(ti_manuf_desc);
1196 /* Update I2C with type 0xf2 record with correct
1197 size and checksum */
1198 status = write_rom(serial,
1206 kfree(ti_manuf_desc);
1210 /* verify the write -- must do this in order for
1211 write to complete before we do the hardware reset */
1212 status = read_rom(serial, start_address,
1213 HEADER_SIZE, vheader);
1216 dev_dbg(dev, "%s - can't read header back\n", __func__);
1220 kfree(ti_manuf_desc);
1223 if (memcmp(vheader, header, HEADER_SIZE)) {
1224 dev_dbg(dev, "%s - write download record failed\n", __func__);
1228 kfree(ti_manuf_desc);
1235 dev_dbg(dev, "%s - Start firmware update\n", __func__);
1237 /* Tell firmware to copy download image into I2C */
1238 status = ti_vsend_sync(serial->serial->dev,
1239 UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0);
1241 dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status);
1244 "%s - UMPC_COPY_DNLD_TO_I2C failed\n",
1247 kfree(ti_manuf_desc);
1252 // The device is running the download code
1254 kfree(ti_manuf_desc);
1258 /********************************************************************/
1260 /********************************************************************/
1261 dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__);
1263 /* Configure the TI device so we can use the BULK pipes for download */
1264 status = config_boot_dev(serial->serial->dev);
1268 if (le16_to_cpu(serial->serial->dev->descriptor.idVendor)
1269 != USB_VENDOR_ID_ION) {
1270 dev_dbg(dev, "%s - VID = 0x%x\n", __func__,
1271 le16_to_cpu(serial->serial->dev->descriptor.idVendor));
1272 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1273 goto stayinbootmode;
1276 /* We have an ION device (I2c Must be programmed)
1277 Determine I2C image type */
1278 if (i2c_type_bootmode(serial))
1279 goto stayinbootmode;
1281 /* Check for ION Vendor ID and that the I2C is valid */
1282 if (!check_i2c_image(serial)) {
1283 struct ti_i2c_image_header *header;
1289 const struct firmware *fw;
1290 const char *fw_name = "edgeport/down3.bin";
1292 /* Validate Hardware version number
1293 * Read Manufacturing Descriptor from TI Based Edgeport
1295 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1296 if (!ti_manuf_desc) {
1297 dev_err(dev, "%s - out of memory.\n", __func__);
1300 status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
1302 kfree(ti_manuf_desc);
1303 goto stayinbootmode;
1306 /* Check for version 2 */
1307 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1308 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
1309 __func__, ti_cpu_rev(ti_manuf_desc));
1310 kfree(ti_manuf_desc);
1311 goto stayinbootmode;
1314 kfree(ti_manuf_desc);
1317 * In order to update the I2C firmware we must change the type
1318 * 2 record to type 0xF2. This will force the UMP to come up
1319 * in Boot Mode. Then while in boot mode, the driver will
1320 * download the latest firmware (padded to 15.5k) into the
1321 * UMP ram. Finally when the device comes back up in download
1322 * mode the driver will cause the new firmware to be copied
1323 * from the UMP Ram to I2C and the firmware will update the
1324 * record type from 0xf2 to 0x02.
1326 * Do we really have to copy the whole firmware image,
1327 * or could we do this in place!
1330 /* Allocate a 15.5k buffer + 3 byte header */
1331 buffer_size = (((1024 * 16) - 512) +
1332 sizeof(struct ti_i2c_image_header));
1333 buffer = kmalloc(buffer_size, GFP_KERNEL);
1335 dev_err(dev, "%s - out of memory\n", __func__);
1339 /* Initialize the buffer to 0xff (pad the buffer) */
1340 memset(buffer, 0xff, buffer_size);
1342 err = request_firmware(&fw, fw_name, dev);
1344 dev_err(dev, "Failed to load image \"%s\" err %d\n",
1349 memcpy(buffer, &fw->data[4], fw->size - 4);
1350 release_firmware(fw);
1352 for (i = sizeof(struct ti_i2c_image_header);
1353 i < buffer_size; i++) {
1354 cs = (__u8)(cs + buffer[i]);
1357 header = (struct ti_i2c_image_header *)buffer;
1359 /* update length and checksum after padding */
1360 header->Length = cpu_to_le16((__u16)(buffer_size -
1361 sizeof(struct ti_i2c_image_header)));
1362 header->CheckSum = cs;
1364 /* Download the operational code */
1365 dev_dbg(dev, "%s - Downloading operational code image (TI UMP)\n", __func__);
1366 status = download_code(serial, buffer, buffer_size);
1371 dev_dbg(dev, "%s - Error downloading operational code image\n", __func__);
1375 /* Device will reboot */
1376 serial->product_info.TiMode = TI_MODE_TRANSITIONING;
1378 dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
1380 /* return an error on purpose */
1385 /* Eprom is invalid or blank stay in boot mode */
1386 dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
1387 serial->product_info.TiMode = TI_MODE_BOOT;
1393 static int ti_do_config(struct edgeport_port *port, int feature, int on)
1395 int port_number = port->port->number - port->port->serial->minor;
1396 on = !!on; /* 1 or 0 not bitmask */
1397 return send_cmd(port->port->serial->dev,
1398 feature, (__u8)(UMPM_UART1_PORT + port_number),
1403 static int restore_mcr(struct edgeport_port *port, __u8 mcr)
1407 dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr);
1409 status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR);
1412 status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS);
1415 return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK);
1418 /* Convert TI LSR to standard UART flags */
1419 static __u8 map_line_status(__u8 ti_lsr)
1423 #define MAP_FLAG(flagUmp, flagUart) \
1424 if (ti_lsr & flagUmp) \
1427 MAP_FLAG(UMP_UART_LSR_OV_MASK, LSR_OVER_ERR) /* overrun */
1428 MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR) /* parity error */
1429 MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR) /* framing error */
1430 MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK) /* break detected */
1431 MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* rx data available */
1432 MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* tx hold reg empty */
1439 static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
1441 struct async_icount *icount;
1442 struct tty_struct *tty;
1444 dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr);
1446 if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
1447 EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
1448 icount = &edge_port->port->icount;
1450 /* update input line counters */
1451 if (msr & EDGEPORT_MSR_DELTA_CTS)
1453 if (msr & EDGEPORT_MSR_DELTA_DSR)
1455 if (msr & EDGEPORT_MSR_DELTA_CD)
1457 if (msr & EDGEPORT_MSR_DELTA_RI)
1459 wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
1462 /* Save the new modem status */
1463 edge_port->shadow_msr = msr & 0xf0;
1465 tty = tty_port_tty_get(&edge_port->port->port);
1466 /* handle CTS flow control */
1467 if (tty && C_CRTSCTS(tty)) {
1468 if (msr & EDGEPORT_MSR_CTS) {
1469 tty->hw_stopped = 0;
1472 tty->hw_stopped = 1;
1478 static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
1479 __u8 lsr, __u8 data)
1481 struct async_icount *icount;
1482 __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
1483 LSR_FRM_ERR | LSR_BREAK));
1485 dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr);
1487 edge_port->shadow_lsr = lsr;
1489 if (new_lsr & LSR_BREAK)
1491 * Parity and Framing errors only count if they
1492 * occur exclusive of a break being received.
1494 new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
1496 /* Place LSR data byte into Rx buffer */
1498 edge_tty_recv(edge_port->port, &data, 1);
1500 /* update input line counters */
1501 icount = &edge_port->port->icount;
1502 if (new_lsr & LSR_BREAK)
1504 if (new_lsr & LSR_OVER_ERR)
1506 if (new_lsr & LSR_PAR_ERR)
1508 if (new_lsr & LSR_FRM_ERR)
1513 static void edge_interrupt_callback(struct urb *urb)
1515 struct edgeport_serial *edge_serial = urb->context;
1516 struct usb_serial_port *port;
1517 struct edgeport_port *edge_port;
1519 unsigned char *data = urb->transfer_buffer;
1520 int length = urb->actual_length;
1526 int status = urb->status;
1535 /* this urb is terminated, clean up */
1536 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
1540 dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
1541 "%d\n", __func__, status);
1546 dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__);
1550 dev = &edge_serial->serial->dev->dev;
1551 usb_serial_debug_data(dev, __func__, length, data);
1554 dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length);
1558 port_number = TIUMP_GET_PORT_FROM_CODE(data[0]);
1559 function = TIUMP_GET_FUNC_FROM_CODE(data[0]);
1560 dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__,
1561 port_number, function, data[1]);
1562 port = edge_serial->serial->port[port_number];
1563 edge_port = usb_get_serial_port_data(port);
1565 dev_dbg(dev, "%s - edge_port not found\n", __func__);
1569 case TIUMP_INTERRUPT_CODE_LSR:
1570 lsr = map_line_status(data[1]);
1571 if (lsr & UMP_UART_LSR_DATA_MASK) {
1572 /* Save the LSR event for bulk read
1573 completion routine */
1574 dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n",
1575 __func__, port_number, lsr);
1576 edge_port->lsr_event = 1;
1577 edge_port->lsr_mask = lsr;
1579 dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n",
1580 __func__, port_number, lsr);
1581 handle_new_lsr(edge_port, 0, lsr, 0);
1585 case TIUMP_INTERRUPT_CODE_MSR: /* MSR */
1586 /* Copy MSR from UMP */
1588 dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n",
1589 __func__, port_number, msr);
1590 handle_new_msr(edge_port, msr);
1594 dev_err(&urb->dev->dev,
1595 "%s - Unknown Interrupt code from UMP %x\n",
1602 retval = usb_submit_urb(urb, GFP_ATOMIC);
1604 dev_err(&urb->dev->dev,
1605 "%s - usb_submit_urb failed with result %d\n",
1609 static void edge_bulk_in_callback(struct urb *urb)
1611 struct edgeport_port *edge_port = urb->context;
1612 struct device *dev = &edge_port->port->dev;
1613 unsigned char *data = urb->transfer_buffer;
1616 int status = urb->status;
1625 /* this urb is terminated, clean up */
1626 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
1629 dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status);
1632 if (status == -EPIPE)
1636 dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__);
1640 port_number = edge_port->port->number - edge_port->port->serial->minor;
1642 if (edge_port->lsr_event) {
1643 edge_port->lsr_event = 0;
1644 dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n",
1645 __func__, port_number, edge_port->lsr_mask, *data);
1646 handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data);
1647 /* Adjust buffer length/pointer */
1648 --urb->actual_length;
1652 if (urb->actual_length) {
1653 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
1654 if (edge_port->close_pending)
1655 dev_dbg(dev, "%s - close pending, dropping data on the floor\n",
1658 edge_tty_recv(edge_port->port, data,
1659 urb->actual_length);
1660 edge_port->port->icount.rx += urb->actual_length;
1664 /* continue read unless stopped */
1665 spin_lock(&edge_port->ep_lock);
1666 if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
1667 retval = usb_submit_urb(urb, GFP_ATOMIC);
1668 else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
1669 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
1671 spin_unlock(&edge_port->ep_lock);
1673 dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval);
1676 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
1681 queued = tty_insert_flip_string(&port->port, data, length);
1682 if (queued < length)
1683 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1684 __func__, length - queued);
1685 tty_flip_buffer_push(&port->port);
1688 static void edge_bulk_out_callback(struct urb *urb)
1690 struct usb_serial_port *port = urb->context;
1691 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1692 int status = urb->status;
1693 struct tty_struct *tty;
1695 edge_port->ep_write_urb_in_use = 0;
1704 /* this urb is terminated, clean up */
1705 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
1709 dev_err_console(port, "%s - nonzero write bulk status "
1710 "received: %d\n", __func__, status);
1713 /* send any buffered data */
1714 tty = tty_port_tty_get(&port->port);
1715 edge_send(port, tty);
1719 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
1721 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1722 struct edgeport_serial *edge_serial;
1723 struct usb_device *dev;
1728 u8 transaction_timeout;
1730 if (edge_port == NULL)
1733 port_number = port->number - port->serial->minor;
1734 switch (port_number) {
1736 edge_port->uart_base = UMPMEM_BASE_UART1;
1737 edge_port->dma_address = UMPD_OEDB1_ADDRESS;
1740 edge_port->uart_base = UMPMEM_BASE_UART2;
1741 edge_port->dma_address = UMPD_OEDB2_ADDRESS;
1744 dev_err(&port->dev, "Unknown port number!!!\n");
1748 dev_dbg(&port->dev, "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n",
1749 __func__, port_number, edge_port->uart_base, edge_port->dma_address);
1751 dev = port->serial->dev;
1753 /* turn off loopback */
1754 status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
1757 "%s - cannot send clear loopback command, %d\n",
1762 /* set up the port settings */
1764 edge_set_termios(tty, port, &tty->termios);
1766 /* open up the port */
1768 /* milliseconds to timeout for DMA transfer */
1769 transaction_timeout = 2;
1771 edge_port->ump_read_timeout =
1772 max(20, ((transaction_timeout * 3) / 2));
1774 /* milliseconds to timeout for DMA transfer */
1775 open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
1776 UMP_PIPE_TRANS_TIMEOUT_ENA |
1777 (transaction_timeout << 2));
1779 dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__);
1781 /* Tell TI to open and start the port */
1782 status = send_cmd(dev, UMPC_OPEN_PORT,
1783 (u8)(UMPM_UART1_PORT + port_number), open_settings, NULL, 0);
1785 dev_err(&port->dev, "%s - cannot send open command, %d\n",
1790 /* Start the DMA? */
1791 status = send_cmd(dev, UMPC_START_PORT,
1792 (u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
1794 dev_err(&port->dev, "%s - cannot send start DMA command, %d\n",
1799 /* Clear TX and RX buffers in UMP */
1800 status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
1803 "%s - cannot send clear buffers command, %d\n",
1808 /* Read Initial MSR */
1809 status = ti_vread_sync(dev, UMPC_READ_MSR, 0,
1810 (__u16)(UMPM_UART1_PORT + port_number),
1811 &edge_port->shadow_msr, 1);
1813 dev_err(&port->dev, "%s - cannot send read MSR command, %d\n",
1818 dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr);
1820 /* Set Initial MCR */
1821 edge_port->shadow_mcr = MCR_RTS | MCR_DTR;
1822 dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr);
1824 edge_serial = edge_port->edge_serial;
1825 if (mutex_lock_interruptible(&edge_serial->es_lock))
1826 return -ERESTARTSYS;
1827 if (edge_serial->num_ports_open == 0) {
1828 /* we are the first port to open, post the interrupt urb */
1829 urb = edge_serial->serial->port[0]->interrupt_in_urb;
1832 "%s - no interrupt urb present, exiting\n",
1835 goto release_es_lock;
1837 urb->context = edge_serial;
1838 status = usb_submit_urb(urb, GFP_KERNEL);
1841 "%s - usb_submit_urb failed with value %d\n",
1843 goto release_es_lock;
1848 * reset the data toggle on the bulk endpoints to work around bug in
1849 * host controllers where things get out of sync some times
1851 usb_clear_halt(dev, port->write_urb->pipe);
1852 usb_clear_halt(dev, port->read_urb->pipe);
1854 /* start up our bulk read urb */
1855 urb = port->read_urb;
1857 dev_err(&port->dev, "%s - no read urb present, exiting\n",
1860 goto unlink_int_urb;
1862 edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
1863 urb->context = edge_port;
1864 status = usb_submit_urb(urb, GFP_KERNEL);
1867 "%s - read bulk usb_submit_urb failed with value %d\n",
1869 goto unlink_int_urb;
1872 ++edge_serial->num_ports_open;
1874 port->port.drain_delay = 1;
1876 goto release_es_lock;
1879 if (edge_port->edge_serial->num_ports_open == 0)
1880 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
1882 mutex_unlock(&edge_serial->es_lock);
1886 static void edge_close(struct usb_serial_port *port)
1888 struct edgeport_serial *edge_serial;
1889 struct edgeport_port *edge_port;
1890 struct usb_serial *serial = port->serial;
1891 unsigned long flags;
1894 edge_serial = usb_get_serial_data(port->serial);
1895 edge_port = usb_get_serial_port_data(port);
1896 if (edge_serial == NULL || edge_port == NULL)
1899 /* The bulkreadcompletion routine will check
1900 * this flag and dump add read data */
1901 edge_port->close_pending = 1;
1903 usb_kill_urb(port->read_urb);
1904 usb_kill_urb(port->write_urb);
1905 edge_port->ep_write_urb_in_use = 0;
1906 spin_lock_irqsave(&edge_port->ep_lock, flags);
1907 kfifo_reset_out(&edge_port->write_fifo);
1908 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1910 dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
1911 port_number = port->number - port->serial->minor;
1912 send_cmd(serial->dev, UMPC_CLOSE_PORT,
1913 (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0);
1915 mutex_lock(&edge_serial->es_lock);
1916 --edge_port->edge_serial->num_ports_open;
1917 if (edge_port->edge_serial->num_ports_open <= 0) {
1918 /* last port is now closed, let's shut down our interrupt urb */
1919 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
1920 edge_port->edge_serial->num_ports_open = 0;
1922 mutex_unlock(&edge_serial->es_lock);
1923 edge_port->close_pending = 0;
1926 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
1927 const unsigned char *data, int count)
1929 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1932 dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
1936 if (edge_port == NULL)
1938 if (edge_port->close_pending == 1)
1941 count = kfifo_in_locked(&edge_port->write_fifo, data, count,
1942 &edge_port->ep_lock);
1943 edge_send(port, tty);
1948 static void edge_send(struct usb_serial_port *port, struct tty_struct *tty)
1951 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1952 unsigned long flags;
1954 spin_lock_irqsave(&edge_port->ep_lock, flags);
1956 if (edge_port->ep_write_urb_in_use) {
1957 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1961 count = kfifo_out(&edge_port->write_fifo,
1962 port->write_urb->transfer_buffer,
1963 port->bulk_out_size);
1966 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1970 edge_port->ep_write_urb_in_use = 1;
1972 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1974 usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer);
1976 /* set up our urb */
1977 port->write_urb->transfer_buffer_length = count;
1979 /* send the data out the bulk port */
1980 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1982 dev_err_console(port,
1983 "%s - failed submitting write urb, error %d\n",
1985 edge_port->ep_write_urb_in_use = 0;
1986 /* TODO: reschedule edge_send */
1988 edge_port->port->icount.tx += count;
1990 /* wakeup any process waiting for writes to complete */
1991 /* there is now more room in the buffer for new writes */
1996 static int edge_write_room(struct tty_struct *tty)
1998 struct usb_serial_port *port = tty->driver_data;
1999 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2001 unsigned long flags;
2003 if (edge_port == NULL)
2005 if (edge_port->close_pending == 1)
2008 spin_lock_irqsave(&edge_port->ep_lock, flags);
2009 room = kfifo_avail(&edge_port->write_fifo);
2010 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2012 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
2016 static int edge_chars_in_buffer(struct tty_struct *tty)
2018 struct usb_serial_port *port = tty->driver_data;
2019 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2021 unsigned long flags;
2022 if (edge_port == NULL)
2025 spin_lock_irqsave(&edge_port->ep_lock, flags);
2026 chars = kfifo_len(&edge_port->write_fifo);
2027 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2029 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
2033 static bool edge_tx_empty(struct usb_serial_port *port)
2035 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2038 ret = tx_active(edge_port);
2045 static void edge_throttle(struct tty_struct *tty)
2047 struct usb_serial_port *port = tty->driver_data;
2048 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2051 if (edge_port == NULL)
2054 /* if we are implementing XON/XOFF, send the stop character */
2056 unsigned char stop_char = STOP_CHAR(tty);
2057 status = edge_write(tty, port, &stop_char, 1);
2059 dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
2063 /* if we are implementing RTS/CTS, stop reads */
2064 /* and the Edgeport will clear the RTS line */
2066 stop_read(edge_port);
2070 static void edge_unthrottle(struct tty_struct *tty)
2072 struct usb_serial_port *port = tty->driver_data;
2073 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2076 if (edge_port == NULL)
2079 /* if we are implementing XON/XOFF, send the start character */
2081 unsigned char start_char = START_CHAR(tty);
2082 status = edge_write(tty, port, &start_char, 1);
2084 dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
2087 /* if we are implementing RTS/CTS, restart reads */
2088 /* are the Edgeport will assert the RTS line */
2089 if (C_CRTSCTS(tty)) {
2090 status = restart_read(edge_port);
2093 "%s - read bulk usb_submit_urb failed: %d\n",
2099 static void stop_read(struct edgeport_port *edge_port)
2101 unsigned long flags;
2103 spin_lock_irqsave(&edge_port->ep_lock, flags);
2105 if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
2106 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPING;
2107 edge_port->shadow_mcr &= ~MCR_RTS;
2109 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2112 static int restart_read(struct edgeport_port *edge_port)
2116 unsigned long flags;
2118 spin_lock_irqsave(&edge_port->ep_lock, flags);
2120 if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
2121 urb = edge_port->port->read_urb;
2122 status = usb_submit_urb(urb, GFP_ATOMIC);
2124 edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
2125 edge_port->shadow_mcr |= MCR_RTS;
2127 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2132 static void change_port_settings(struct tty_struct *tty,
2133 struct edgeport_port *edge_port, struct ktermios *old_termios)
2135 struct device *dev = &edge_port->port->dev;
2136 struct ump_uart_config *config;
2140 int port_number = edge_port->port->number -
2141 edge_port->port->serial->minor;
2143 dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number);
2145 config = kmalloc (sizeof (*config), GFP_KERNEL);
2147 tty->termios = *old_termios;
2148 dev_err(dev, "%s - out of memory\n", __func__);
2152 cflag = tty->termios.c_cflag;
2156 /* These flags must be set */
2157 config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT;
2158 config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR;
2159 config->bUartMode = (__u8)(edge_port->bUartMode);
2161 switch (cflag & CSIZE) {
2163 config->bDataBits = UMP_UART_CHAR5BITS;
2164 dev_dbg(dev, "%s - data bits = 5\n", __func__);
2167 config->bDataBits = UMP_UART_CHAR6BITS;
2168 dev_dbg(dev, "%s - data bits = 6\n", __func__);
2171 config->bDataBits = UMP_UART_CHAR7BITS;
2172 dev_dbg(dev, "%s - data bits = 7\n", __func__);
2176 config->bDataBits = UMP_UART_CHAR8BITS;
2177 dev_dbg(dev, "%s - data bits = 8\n", __func__);
2181 if (cflag & PARENB) {
2182 if (cflag & PARODD) {
2183 config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2184 config->bParity = UMP_UART_ODDPARITY;
2185 dev_dbg(dev, "%s - parity = odd\n", __func__);
2187 config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2188 config->bParity = UMP_UART_EVENPARITY;
2189 dev_dbg(dev, "%s - parity = even\n", __func__);
2192 config->bParity = UMP_UART_NOPARITY;
2193 dev_dbg(dev, "%s - parity = none\n", __func__);
2196 if (cflag & CSTOPB) {
2197 config->bStopBits = UMP_UART_STOPBIT2;
2198 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
2200 config->bStopBits = UMP_UART_STOPBIT1;
2201 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
2204 /* figure out the flow control settings */
2205 if (cflag & CRTSCTS) {
2206 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
2207 config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
2208 dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
2210 dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
2211 tty->hw_stopped = 0;
2212 restart_read(edge_port);
2215 /* if we are implementing XON/XOFF, set the start and stop
2216 character in the device */
2217 config->cXon = START_CHAR(tty);
2218 config->cXoff = STOP_CHAR(tty);
2220 /* if we are implementing INBOUND XON/XOFF */
2222 config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
2223 dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2224 __func__, config->cXon, config->cXoff);
2226 dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
2228 /* if we are implementing OUTBOUND XON/XOFF */
2230 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
2231 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2232 __func__, config->cXon, config->cXoff);
2234 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
2236 tty->termios.c_cflag &= ~CMSPAR;
2238 /* Round the baud rate */
2239 baud = tty_get_baud_rate(tty);
2241 /* pick a default, any default... */
2244 tty_encode_baud_rate(tty, baud, baud);
2246 edge_port->baud_rate = baud;
2247 config->wBaudRate = (__u16)((461550L + baud/2) / baud);
2249 /* FIXME: Recompute actual baud from divisor here */
2251 dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate);
2253 dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate));
2254 dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags);
2255 dev_dbg(dev, "bDataBits: %d\n", config->bDataBits);
2256 dev_dbg(dev, "bParity: %d\n", config->bParity);
2257 dev_dbg(dev, "bStopBits: %d\n", config->bStopBits);
2258 dev_dbg(dev, "cXon: %d\n", config->cXon);
2259 dev_dbg(dev, "cXoff: %d\n", config->cXoff);
2260 dev_dbg(dev, "bUartMode: %d\n", config->bUartMode);
2262 /* move the word values into big endian mode */
2263 cpu_to_be16s(&config->wFlags);
2264 cpu_to_be16s(&config->wBaudRate);
2266 status = send_cmd(edge_port->port->serial->dev, UMPC_SET_CONFIG,
2267 (__u8)(UMPM_UART1_PORT + port_number),
2268 0, (__u8 *)config, sizeof(*config));
2270 dev_dbg(dev, "%s - error %d when trying to write config to device\n",
2275 static void edge_set_termios(struct tty_struct *tty,
2276 struct usb_serial_port *port, struct ktermios *old_termios)
2278 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2281 cflag = tty->termios.c_cflag;
2283 dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__,
2284 tty->termios.c_cflag, tty->termios.c_iflag);
2285 dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
2286 old_termios->c_cflag, old_termios->c_iflag);
2287 dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
2289 if (edge_port == NULL)
2291 /* change the port settings to the new ones specified */
2292 change_port_settings(tty, edge_port, old_termios);
2295 static int edge_tiocmset(struct tty_struct *tty,
2296 unsigned int set, unsigned int clear)
2298 struct usb_serial_port *port = tty->driver_data;
2299 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2301 unsigned long flags;
2303 spin_lock_irqsave(&edge_port->ep_lock, flags);
2304 mcr = edge_port->shadow_mcr;
2305 if (set & TIOCM_RTS)
2307 if (set & TIOCM_DTR)
2309 if (set & TIOCM_LOOP)
2310 mcr |= MCR_LOOPBACK;
2312 if (clear & TIOCM_RTS)
2314 if (clear & TIOCM_DTR)
2316 if (clear & TIOCM_LOOP)
2317 mcr &= ~MCR_LOOPBACK;
2319 edge_port->shadow_mcr = mcr;
2320 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2322 restore_mcr(edge_port, mcr);
2326 static int edge_tiocmget(struct tty_struct *tty)
2328 struct usb_serial_port *port = tty->driver_data;
2329 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2330 unsigned int result = 0;
2333 unsigned long flags;
2335 spin_lock_irqsave(&edge_port->ep_lock, flags);
2337 msr = edge_port->shadow_msr;
2338 mcr = edge_port->shadow_mcr;
2339 result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
2340 | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
2341 | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */
2342 | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */
2343 | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
2344 | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
2347 dev_dbg(&port->dev, "%s -- %x\n", __func__, result);
2348 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2353 static int get_serial_info(struct edgeport_port *edge_port,
2354 struct serial_struct __user *retinfo)
2356 struct serial_struct tmp;
2362 cwait = edge_port->port->port.closing_wait;
2363 if (cwait != ASYNC_CLOSING_WAIT_NONE)
2364 cwait = jiffies_to_msecs(cwait) / 10;
2366 memset(&tmp, 0, sizeof(tmp));
2368 tmp.type = PORT_16550A;
2369 tmp.line = edge_port->port->serial->minor;
2370 tmp.port = edge_port->port->number;
2372 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
2373 tmp.xmit_fifo_size = edge_port->port->bulk_out_size;
2374 tmp.baud_base = 9600;
2375 tmp.close_delay = 5*HZ;
2376 tmp.closing_wait = cwait;
2378 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
2383 static int edge_ioctl(struct tty_struct *tty,
2384 unsigned int cmd, unsigned long arg)
2386 struct usb_serial_port *port = tty->driver_data;
2387 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2389 dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
2393 dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__);
2394 return get_serial_info(edge_port,
2395 (struct serial_struct __user *) arg);
2397 return -ENOIOCTLCMD;
2400 static void edge_break(struct tty_struct *tty, int break_state)
2402 struct usb_serial_port *port = tty->driver_data;
2403 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2405 int bv = 0; /* Off */
2407 if (break_state == -1)
2409 status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
2411 dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n",
2415 static int edge_startup(struct usb_serial *serial)
2417 struct edgeport_serial *edge_serial;
2420 /* create our private serial structure */
2421 edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2422 if (edge_serial == NULL) {
2423 dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
2426 mutex_init(&edge_serial->es_lock);
2427 edge_serial->serial = serial;
2428 usb_set_serial_data(serial, edge_serial);
2430 status = download_fw(edge_serial);
2439 static void edge_disconnect(struct usb_serial *serial)
2443 static void edge_release(struct usb_serial *serial)
2445 kfree(usb_get_serial_data(serial));
2448 static int edge_port_probe(struct usb_serial_port *port)
2450 struct edgeport_port *edge_port;
2453 edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
2457 ret = kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
2464 spin_lock_init(&edge_port->ep_lock);
2465 edge_port->port = port;
2466 edge_port->edge_serial = usb_get_serial_data(port->serial);
2467 edge_port->bUartMode = default_uart_mode;
2469 usb_set_serial_port_data(port, edge_port);
2471 ret = edge_create_sysfs_attrs(port);
2473 kfifo_free(&edge_port->write_fifo);
2478 port->port.closing_wait = msecs_to_jiffies(closing_wait * 10);
2483 static int edge_port_remove(struct usb_serial_port *port)
2485 struct edgeport_port *edge_port;
2487 edge_port = usb_get_serial_port_data(port);
2488 edge_remove_sysfs_attrs(port);
2489 kfifo_free(&edge_port->write_fifo);
2495 /* Sysfs Attributes */
2497 static ssize_t show_uart_mode(struct device *dev,
2498 struct device_attribute *attr, char *buf)
2500 struct usb_serial_port *port = to_usb_serial_port(dev);
2501 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2503 return sprintf(buf, "%d\n", edge_port->bUartMode);
2506 static ssize_t store_uart_mode(struct device *dev,
2507 struct device_attribute *attr, const char *valbuf, size_t count)
2509 struct usb_serial_port *port = to_usb_serial_port(dev);
2510 struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2511 unsigned int v = simple_strtoul(valbuf, NULL, 0);
2513 dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v);
2516 edge_port->bUartMode = v;
2518 dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
2523 static DEVICE_ATTR(uart_mode, S_IWUSR | S_IRUGO, show_uart_mode,
2526 static int edge_create_sysfs_attrs(struct usb_serial_port *port)
2528 return device_create_file(&port->dev, &dev_attr_uart_mode);
2531 static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
2533 device_remove_file(&port->dev, &dev_attr_uart_mode);
2538 static struct usb_serial_driver edgeport_1port_device = {
2540 .owner = THIS_MODULE,
2541 .name = "edgeport_ti_1",
2543 .description = "Edgeport TI 1 port adapter",
2544 .id_table = edgeport_1port_id_table,
2547 .close = edge_close,
2548 .throttle = edge_throttle,
2549 .unthrottle = edge_unthrottle,
2550 .attach = edge_startup,
2551 .disconnect = edge_disconnect,
2552 .release = edge_release,
2553 .port_probe = edge_port_probe,
2554 .port_remove = edge_port_remove,
2555 .ioctl = edge_ioctl,
2556 .set_termios = edge_set_termios,
2557 .tiocmget = edge_tiocmget,
2558 .tiocmset = edge_tiocmset,
2559 .tiocmiwait = usb_serial_generic_tiocmiwait,
2560 .get_icount = usb_serial_generic_get_icount,
2561 .write = edge_write,
2562 .write_room = edge_write_room,
2563 .chars_in_buffer = edge_chars_in_buffer,
2564 .tx_empty = edge_tx_empty,
2565 .break_ctl = edge_break,
2566 .read_int_callback = edge_interrupt_callback,
2567 .read_bulk_callback = edge_bulk_in_callback,
2568 .write_bulk_callback = edge_bulk_out_callback,
2571 static struct usb_serial_driver edgeport_2port_device = {
2573 .owner = THIS_MODULE,
2574 .name = "edgeport_ti_2",
2576 .description = "Edgeport TI 2 port adapter",
2577 .id_table = edgeport_2port_id_table,
2580 .close = edge_close,
2581 .throttle = edge_throttle,
2582 .unthrottle = edge_unthrottle,
2583 .attach = edge_startup,
2584 .disconnect = edge_disconnect,
2585 .release = edge_release,
2586 .port_probe = edge_port_probe,
2587 .port_remove = edge_port_remove,
2588 .ioctl = edge_ioctl,
2589 .set_termios = edge_set_termios,
2590 .tiocmget = edge_tiocmget,
2591 .tiocmset = edge_tiocmset,
2592 .tiocmiwait = usb_serial_generic_tiocmiwait,
2593 .get_icount = usb_serial_generic_get_icount,
2594 .write = edge_write,
2595 .write_room = edge_write_room,
2596 .chars_in_buffer = edge_chars_in_buffer,
2597 .tx_empty = edge_tx_empty,
2598 .break_ctl = edge_break,
2599 .read_int_callback = edge_interrupt_callback,
2600 .read_bulk_callback = edge_bulk_in_callback,
2601 .write_bulk_callback = edge_bulk_out_callback,
2604 static struct usb_serial_driver * const serial_drivers[] = {
2605 &edgeport_1port_device, &edgeport_2port_device, NULL
2608 module_usb_serial_driver(serial_drivers, id_table_combined);
2610 MODULE_AUTHOR(DRIVER_AUTHOR);
2611 MODULE_DESCRIPTION(DRIVER_DESC);
2612 MODULE_LICENSE("GPL");
2613 MODULE_FIRMWARE("edgeport/down3.bin");
2615 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
2616 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
2618 module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR);
2619 MODULE_PARM_DESC(ignore_cpu_rev,
2620 "Ignore the cpu revision when connecting to a device");
2622 module_param(default_uart_mode, int, S_IRUGO | S_IWUSR);
2623 MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");