drivers/usb/isp1760/isp1760-hcd.c

   1 /*
   2  * Driver for the NXP ISP1760 chip
   3  *
   4  * However, the code might contain some bugs. What doesn't work for sure is:
   5  * - ISO
   6  * - OTG
   7  e The interrupt line is configured as active low, level.
   8  *
   9  * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
  10  *
  11  * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
  12  *
  13  */
  14 #include <linux/gpio/consumer.h>
  15 #include <linux/module.h>
  16 #include <linux/kernel.h>
  17 #include <linux/slab.h>
  18 #include <linux/list.h>
  19 #include <linux/usb.h>
  20 #include <linux/usb/hcd.h>
  21 #include <linux/debugfs.h>
  22 #include <linux/uaccess.h>
  23 #include <linux/io.h>
  24 #include <linux/mm.h>
  25 #include <linux/timer.h>
  26 #include <asm/unaligned.h>
  27 #include <asm/cacheflush.h>
  28
  29 #include "isp1760-core.h"
  30 #include "isp1760-hcd.h"
  31 #include "isp1760-regs.h"
  32
  33 static struct kmem_cache *qtd_cachep;
  34 static struct kmem_cache *qh_cachep;
  35 static struct kmem_cache *urb_listitem_cachep;
  36
  37 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
  38                 struct isp1760_qtd *qtd);
  39
  40 static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
  41 {
  42         return *(struct isp1760_hcd **)hcd->hcd_priv;
  43 }
  44
  45 /* urb state*/
  46 #define DELETE_URB              (0x0008)
  47 #define NO_TRANSFER_ACTIVE      (0xffffffff)
  48
  49 /* Philips Proprietary Transfer Descriptor (PTD) */
  50 typedef __u32 __bitwise __dw;
  51 struct ptd {
  52         __dw dw0;
  53         __dw dw1;
  54         __dw dw2;
  55         __dw dw3;
  56         __dw dw4;
  57         __dw dw5;
  58         __dw dw6;
  59         __dw dw7;
  60 };
  61 #define PTD_OFFSET              0x0400
  62 #define ISO_PTD_OFFSET          0x0400
  63 #define INT_PTD_OFFSET          0x0800
  64 #define ATL_PTD_OFFSET          0x0c00
  65 #define PAYLOAD_OFFSET          0x1000
  66
  67
  68 /* ATL */
  69 /* DW0 */
  70 #define DW0_VALID_BIT                   1
  71 #define FROM_DW0_VALID(x)               ((x) & 0x01)
  72 #define TO_DW0_LENGTH(x)                (((u32) x) << 3)
  73 #define TO_DW0_MAXPACKET(x)             (((u32) x) << 18)
  74 #define TO_DW0_MULTI(x)                 (((u32) x) << 29)
  75 #define TO_DW0_ENDPOINT(x)              (((u32) x) << 31)
  76 /* DW1 */
  77 #define TO_DW1_DEVICE_ADDR(x)           (((u32) x) << 3)
  78 #define TO_DW1_PID_TOKEN(x)             (((u32) x) << 10)
  79 #define DW1_TRANS_BULK                  ((u32) 2 << 12)
  80 #define DW1_TRANS_INT                   ((u32) 3 << 12)
  81 #define DW1_TRANS_SPLIT                 ((u32) 1 << 14)
  82 #define DW1_SE_USB_LOSPEED              ((u32) 2 << 16)
  83 #define TO_DW1_PORT_NUM(x)              (((u32) x) << 18)
  84 #define TO_DW1_HUB_NUM(x)               (((u32) x) << 25)
  85 /* DW2 */
  86 #define TO_DW2_DATA_START_ADDR(x)       (((u32) x) << 8)
  87 #define TO_DW2_RL(x)                    ((x) << 25)
  88 #define FROM_DW2_RL(x)                  (((x) >> 25) & 0xf)
  89 /* DW3 */
  90 #define FROM_DW3_NRBYTESTRANSFERRED(x)          ((x) & 0x7fff)
  91 #define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)      ((x) & 0x07ff)
  92 #define TO_DW3_NAKCOUNT(x)              ((x) << 19)
  93 #define FROM_DW3_NAKCOUNT(x)            (((x) >> 19) & 0xf)
  94 #define TO_DW3_CERR(x)                  ((x) << 23)
  95 #define FROM_DW3_CERR(x)                (((x) >> 23) & 0x3)
  96 #define TO_DW3_DATA_TOGGLE(x)           ((x) << 25)
  97 #define FROM_DW3_DATA_TOGGLE(x)         (((x) >> 25) & 0x1)
  98 #define TO_DW3_PING(x)                  ((x) << 26)
  99 #define FROM_DW3_PING(x)                (((x) >> 26) & 0x1)
 100 #define DW3_ERROR_BIT                   (1 << 28)
 101 #define DW3_BABBLE_BIT                  (1 << 29)
 102 #define DW3_HALT_BIT                    (1 << 30)
 103 #define DW3_ACTIVE_BIT                  (1 << 31)
 104 #define FROM_DW3_ACTIVE(x)              (((x) >> 31) & 0x01)
 105
 106 #define INT_UNDERRUN                    (1 << 2)
 107 #define INT_BABBLE                      (1 << 1)
 108 #define INT_EXACT                       (1 << 0)
 109
 110 #define SETUP_PID       (2)
 111 #define IN_PID          (1)
 112 #define OUT_PID         (0)
 113
 114 /* Errata 1 */
 115 #define RL_COUNTER      (0)
 116 #define NAK_COUNTER     (0)
 117 #define ERR_COUNTER     (2)
 118
 119 struct isp1760_qtd {
 120         u8 packet_type;
 121         void *data_buffer;
 122         u32 payload_addr;
 123
 124         /* the rest is HCD-private */
 125         struct list_head qtd_list;
 126         struct urb *urb;
 127         size_t length;
 128         size_t actual_length;
 129
 130         /* QTD_ENQUEUED:        waiting for transfer (inactive) */
 131         /* QTD_PAYLOAD_ALLOC:   chip mem has been allocated for payload */
 132         /* QTD_XFER_STARTED:    valid ptd has been written to isp176x - only
 133                                 interrupt handler may touch this qtd! */
 134         /* QTD_XFER_COMPLETE:   payload has been transferred successfully */
 135         /* QTD_RETIRE:          transfer error/abort qtd */
 136 #define QTD_ENQUEUED            0
 137 #define QTD_PAYLOAD_ALLOC       1
 138 #define QTD_XFER_STARTED        2
 139 #define QTD_XFER_COMPLETE       3
 140 #define QTD_RETIRE              4
 141         u32 status;
 142 };
 143
 144 /* Queue head, one for each active endpoint */
 145 struct isp1760_qh {
 146         struct list_head qh_list;
 147         struct list_head qtd_list;
 148         u32 toggle;
 149         u32 ping;
 150         int slot;
 151         int tt_buffer_dirty;    /* See USB2.0 spec section 11.17.5 */
 152 };
 153
 154 struct urb_listitem {
 155         struct list_head urb_list;
 156         struct urb *urb;
 157 };
 158
 159 /*
 160  * Access functions for isp176x registers (addresses 0..0x03FF).
 161  */
 162 static u32 reg_read32(void __iomem *base, u32 reg)
 163 {
 164         return isp1760_read32(base, reg);
 165 }
 166
 167 static void reg_write32(void __iomem *base, u32 reg, u32 val)
 168 {
 169         isp1760_write32(base, reg, val);
 170 }
 171
 172 /*
 173  * Access functions for isp176x memory (offset >= 0x0400).
 174  *
 175  * bank_reads8() reads memory locations prefetched by an earlier write to
 176  * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
 177  * bank optimizations, you should use the more generic mem_reads8() below.
 178  *
 179  * For access to ptd memory, use the specialized ptd_read() and ptd_write()
 180  * below.
 181  *
 182  * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
 183  * doesn't quite work because some people have to enforce 32-bit access
 184  */
 185 static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
 186                                                         __u32 *dst, u32 bytes)
 187 {
 188         __u32 __iomem *src;
 189         u32 val;
 190         __u8 *src_byteptr;
 191         __u8 *dst_byteptr;
 192
 193         src = src_base + (bank_addr | src_offset);
 194
 195         if (src_offset < PAYLOAD_OFFSET) {
 196                 while (bytes >= 4) {
 197                         *dst = le32_to_cpu(__raw_readl(src));
 198                         bytes -= 4;
 199                         src++;
 200                         dst++;
 201                 }
 202         } else {
 203                 while (bytes >= 4) {
 204                         *dst = __raw_readl(src);
 205                         bytes -= 4;
 206                         src++;
 207                         dst++;
 208                 }
 209         }
 210
 211         if (!bytes)
 212                 return;
 213
 214         /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
 215          * allocated.
 216          */
 217         if (src_offset < PAYLOAD_OFFSET)
 218                 val = le32_to_cpu(__raw_readl(src));
 219         else
 220                 val = __raw_readl(src);
 221
 222         dst_byteptr = (void *) dst;
 223         src_byteptr = (void *) &val;
 224         while (bytes > 0) {
 225                 *dst_byteptr = *src_byteptr;
 226                 dst_byteptr++;
 227                 src_byteptr++;
 228                 bytes--;
 229         }
 230 }
 231
 232 static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst,
 233                                                                 u32 bytes)
 234 {
 235         reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0));
 236         ndelay(90);
 237         bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes);
 238 }
 239
 240 static void mem_writes8(void __iomem *dst_base, u32 dst_offset,
 241                                                 __u32 const *src, u32 bytes)
 242 {
 243         __u32 __iomem *dst;
 244
 245         dst = dst_base + dst_offset;
 246
 247         if (dst_offset < PAYLOAD_OFFSET) {
 248                 while (bytes >= 4) {
 249                         __raw_writel(cpu_to_le32(*src), dst);
 250                         bytes -= 4;
 251                         src++;
 252                         dst++;
 253                 }
 254         } else {
 255                 while (bytes >= 4) {
 256                         __raw_writel(*src, dst);
 257                         bytes -= 4;
 258                         src++;
 259                         dst++;
 260                 }
 261         }
 262
 263         if (!bytes)
 264                 return;
 265         /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
 266          * extra bytes should not be read by the HW.
 267          */
 268
 269         if (dst_offset < PAYLOAD_OFFSET)
 270                 __raw_writel(cpu_to_le32(*src), dst);
 271         else
 272                 __raw_writel(*src, dst);
 273 }
 274
 275 /*
 276  * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
 277  * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
 278  */
 279 static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot,
 280                                                                 struct ptd *ptd)
 281 {
 282         reg_write32(base, HC_MEMORY_REG,
 283                                 ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd));
 284         ndelay(90);
 285         bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0),
 286                                                 (void *) ptd, sizeof(*ptd));
 287 }
 288
 289 static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
 290                                                                 struct ptd *ptd)
 291 {
 292         mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0),
 293                                                 &ptd->dw1, 7*sizeof(ptd->dw1));
 294         /* Make sure dw0 gets written last (after other dw's and after payload)
 295            since it contains the enable bit */
 296         wmb();
 297         mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0,
 298                                                         sizeof(ptd->dw0));
 299 }
 300
 301
 302 /* memory management of the 60kb on the chip from 0x1000 to 0xffff */
 303 static void init_memory(struct isp1760_hcd *priv)
 304 {
 305         int i, curr;
 306         u32 payload_addr;
 307
 308         payload_addr = PAYLOAD_OFFSET;
 309         for (i = 0; i < BLOCK_1_NUM; i++) {
 310                 priv->memory_pool[i].start = payload_addr;
 311                 priv->memory_pool[i].size = BLOCK_1_SIZE;
 312                 priv->memory_pool[i].free = 1;
 313                 payload_addr += priv->memory_pool[i].size;
 314         }
 315
 316         curr = i;
 317         for (i = 0; i < BLOCK_2_NUM; i++) {
 318                 priv->memory_pool[curr + i].start = payload_addr;
 319                 priv->memory_pool[curr + i].size = BLOCK_2_SIZE;
 320                 priv->memory_pool[curr + i].free = 1;
 321                 payload_addr += priv->memory_pool[curr + i].size;
 322         }
 323
 324         curr = i;
 325         for (i = 0; i < BLOCK_3_NUM; i++) {
 326                 priv->memory_pool[curr + i].start = payload_addr;
 327                 priv->memory_pool[curr + i].size = BLOCK_3_SIZE;
 328                 priv->memory_pool[curr + i].free = 1;
 329                 payload_addr += priv->memory_pool[curr + i].size;
 330         }
 331
 332         WARN_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE);
 333 }
 334
 335 static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 336 {
 337         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 338         int i;
 339
 340         WARN_ON(qtd->payload_addr);
 341
 342         if (!qtd->length)
 343                 return;
 344
 345         for (i = 0; i < BLOCKS; i++) {
 346                 if (priv->memory_pool[i].size >= qtd->length &&
 347                                 priv->memory_pool[i].free) {
 348                         priv->memory_pool[i].free = 0;
 349                         qtd->payload_addr = priv->memory_pool[i].start;
 350                         return;
 351                 }
 352         }
 353 }
 354
 355 static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 356 {
 357         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 358         int i;
 359
 360         if (!qtd->payload_addr)
 361                 return;
 362
 363         for (i = 0; i < BLOCKS; i++) {
 364                 if (priv->memory_pool[i].start == qtd->payload_addr) {
 365                         WARN_ON(priv->memory_pool[i].free);
 366                         priv->memory_pool[i].free = 1;
 367                         qtd->payload_addr = 0;
 368                         return;
 369                 }
 370         }
 371
 372         dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
 373                                                 __func__, qtd->payload_addr);
 374         WARN_ON(1);
 375         qtd->payload_addr = 0;
 376 }
 377
 378 static int handshake(struct usb_hcd *hcd, u32 reg,
 379                       u32 mask, u32 done, int usec)
 380 {
 381         u32 result;
 382
 383         do {
 384                 result = reg_read32(hcd->regs, reg);
 385                 if (result == ~0)
 386                         return -ENODEV;
 387                 result &= mask;
 388                 if (result == done)
 389                         return 0;
 390                 udelay(1);
 391                 usec--;
 392         } while (usec > 0);
 393         return -ETIMEDOUT;
 394 }
 395
 396 /* reset a non-running (STS_HALT == 1) controller */
 397 static int ehci_reset(struct usb_hcd *hcd)
 398 {
 399         int retval;
 400         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 401
 402         u32 command = reg_read32(hcd->regs, HC_USBCMD);
 403
 404         command |= CMD_RESET;
 405         reg_write32(hcd->regs, HC_USBCMD, command);
 406         hcd->state = HC_STATE_HALT;
 407         priv->next_statechange = jiffies;
 408         retval = handshake(hcd, HC_USBCMD,
 409                             CMD_RESET, 0, 250 * 1000);
 410         return retval;
 411 }
 412
 413 static struct isp1760_qh *qh_alloc(gfp_t flags)
 414 {
 415         struct isp1760_qh *qh;
 416
 417         qh = kmem_cache_zalloc(qh_cachep, flags);
 418         if (!qh)
 419                 return NULL;
 420
 421         INIT_LIST_HEAD(&qh->qh_list);
 422         INIT_LIST_HEAD(&qh->qtd_list);
 423         qh->slot = -1;
 424
 425         return qh;
 426 }
 427
 428 static void qh_free(struct isp1760_qh *qh)
 429 {
 430         WARN_ON(!list_empty(&qh->qtd_list));
 431         WARN_ON(qh->slot > -1);
 432         kmem_cache_free(qh_cachep, qh);
 433 }
 434
 435 /* one-time init, only for memory state */
 436 static int priv_init(struct usb_hcd *hcd)
 437 {
 438         struct isp1760_hcd              *priv = hcd_to_priv(hcd);
 439         u32                     hcc_params;
 440         int i;
 441
 442         spin_lock_init(&priv->lock);
 443
 444         for (i = 0; i < QH_END; i++)
 445                 INIT_LIST_HEAD(&priv->qh_list[i]);
 446
 447         /*
 448          * hw default: 1K periodic list heads, one per frame.
 449          * periodic_size can shrink by USBCMD update if hcc_params allows.
 450          */
 451         priv->periodic_size = DEFAULT_I_TDPS;
 452
 453         /* controllers may cache some of the periodic schedule ... */
 454         hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS);
 455         /* full frame cache */
 456         if (HCC_ISOC_CACHE(hcc_params))
 457                 priv->i_thresh = 8;
 458         else /* N microframes cached */
 459                 priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
 460
 461         return 0;
 462 }
 463
 464 static int isp1760_hc_setup(struct usb_hcd *hcd)
 465 {
 466         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 467         int result;
 468         u32 scratch, hwmode;
 469
 470         reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe);
 471         /* Change bus pattern */
 472         scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG);
 473         scratch = reg_read32(hcd->regs, HC_SCRATCH_REG);
 474         if (scratch != 0xdeadbabe) {
 475                 dev_err(hcd->self.controller, "Scratch test failed.\n");
 476                 return -ENODEV;
 477         }
 478
 479         /*
 480          * The RESET_HC bit in the SW_RESET register is supposed to reset the
 481          * host controller without touching the CPU interface registers, but at
 482          * least on the ISP1761 it seems to behave as the RESET_ALL bit and
 483          * reset the whole device. We thus can't use it here, so let's reset
 484          * the host controller through the EHCI USB Command register. The device
 485          * has been reset in core code anyway, so this shouldn't matter.
 486          */
 487         reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0);
 488         reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
 489         reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
 490         reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
 491
 492         result = ehci_reset(hcd);
 493         if (result)
 494                 return result;
 495
 496         /* Step 11 passed */
 497
 498         /* ATL reset */
 499         hwmode = reg_read32(hcd->regs, HC_HW_MODE_CTRL) & ~ALL_ATX_RESET;
 500         reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
 501         mdelay(10);
 502         reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
 503
 504         reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK);
 505
 506         priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS);
 507
 508         return priv_init(hcd);
 509 }
 510
 511 static u32 base_to_chip(u32 base)
 512 {
 513         return ((base - 0x400) >> 3);
 514 }
 515
 516 static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
 517 {
 518         struct urb *urb;
 519
 520         if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
 521                 return 1;
 522
 523         urb = qtd->urb;
 524         qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
 525         return (qtd->urb != urb);
 526 }
 527
 528 /* magic numbers that can affect system performance */
 529 #define EHCI_TUNE_CERR          3       /* 0-3 qtd retries; 0 == don't stop */
 530 #define EHCI_TUNE_RL_HS         4       /* nak throttle; see 4.9 */
 531 #define EHCI_TUNE_RL_TT         0
 532 #define EHCI_TUNE_MULT_HS       1       /* 1-3 transactions/uframe; 4.10.3 */
 533 #define EHCI_TUNE_MULT_TT       1
 534 #define EHCI_TUNE_FLS           2       /* (small) 256 frame schedule */
 535
 536 static void create_ptd_atl(struct isp1760_qh *qh,
 537                         struct isp1760_qtd *qtd, struct ptd *ptd)
 538 {
 539         u32 maxpacket;
 540         u32 multi;
 541         u32 rl = RL_COUNTER;
 542         u32 nak = NAK_COUNTER;
 543
 544         memset(ptd, 0, sizeof(*ptd));
 545
 546         /* according to 3.6.2, max packet len can not be > 0x400 */
 547         maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe,
 548                                                 usb_pipeout(qtd->urb->pipe));
 549         multi =  1 + ((maxpacket >> 11) & 0x3);
 550         maxpacket &= 0x7ff;
 551
 552         /* DW0 */
 553         ptd->dw0 = DW0_VALID_BIT;
 554         ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
 555         ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
 556         ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
 557
 558         /* DW1 */
 559         ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1;
 560         ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
 561         ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);
 562
 563         if (usb_pipebulk(qtd->urb->pipe))
 564                 ptd->dw1 |= DW1_TRANS_BULK;
 565         else if  (usb_pipeint(qtd->urb->pipe))
 566                 ptd->dw1 |= DW1_TRANS_INT;
 567
 568         if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
 569                 /* split transaction */
 570
 571                 ptd->dw1 |= DW1_TRANS_SPLIT;
 572                 if (qtd->urb->dev->speed == USB_SPEED_LOW)
 573                         ptd->dw1 |= DW1_SE_USB_LOSPEED;
 574
 575                 ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
 576                 ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
 577
 578                 /* SE bit for Split INT transfers */
 579                 if (usb_pipeint(qtd->urb->pipe) &&
 580                                 (qtd->urb->dev->speed == USB_SPEED_LOW))
 581                         ptd->dw1 |= 2 << 16;
 582
 583                 rl = 0;
 584                 nak = 0;
 585         } else {
 586                 ptd->dw0 |= TO_DW0_MULTI(multi);
 587                 if (usb_pipecontrol(qtd->urb->pipe) ||
 588                                                 usb_pipebulk(qtd->urb->pipe))
 589                         ptd->dw3 |= TO_DW3_PING(qh->ping);
 590         }
 591         /* DW2 */
 592         ptd->dw2 = 0;
 593         ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
 594         ptd->dw2 |= TO_DW2_RL(rl);
 595
 596         /* DW3 */
 597         ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
 598         ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
 599         if (usb_pipecontrol(qtd->urb->pipe)) {
 600                 if (qtd->data_buffer == qtd->urb->setup_packet)
 601                         ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
 602                 else if (last_qtd_of_urb(qtd, qh))
 603                         ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
 604         }
 605
 606         ptd->dw3 |= DW3_ACTIVE_BIT;
 607         /* Cerr */
 608         ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
 609 }
 610
 611 static void transform_add_int(struct isp1760_qh *qh,
 612                         struct isp1760_qtd *qtd, struct ptd *ptd)
 613 {
 614         u32 usof;
 615         u32 period;
 616
 617         /*
 618          * Most of this is guessing. ISP1761 datasheet is quite unclear, and
 619          * the algorithm from the original Philips driver code, which was
 620          * pretty much used in this driver before as well, is quite horrendous
 621          * and, i believe, incorrect. The code below follows the datasheet and
 622          * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
 623          * more reliable this way (fingers crossed...).
 624          */
 625
 626         if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
 627                 /* urb->interval is in units of microframes (1/8 ms) */
 628                 period = qtd->urb->interval >> 3;
 629
 630                 if (qtd->urb->interval > 4)
 631                         usof = 0x01; /* One bit set =>
 632                                                 interval 1 ms * uFrame-match */
 633                 else if (qtd->urb->interval > 2)
 634                         usof = 0x22; /* Two bits set => interval 1/2 ms */
 635                 else if (qtd->urb->interval > 1)
 636                         usof = 0x55; /* Four bits set => interval 1/4 ms */
 637                 else
 638                         usof = 0xff; /* All bits set => interval 1/8 ms */
 639         } else {
 640                 /* urb->interval is in units of frames (1 ms) */
 641                 period = qtd->urb->interval;
 642                 usof = 0x0f;            /* Execute Start Split on any of the
 643                                            four first uFrames */
 644
 645                 /*
 646                  * First 8 bits in dw5 is uSCS and "specifies which uSOF the
 647                  * complete split needs to be sent. Valid only for IN." Also,
 648                  * "All bits can be set to one for every transfer." (p 82,
 649                  * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
 650                  * that number come from? 0xff seems to work fine...
 651                  */
 652                 /* ptd->dw5 = 0x1c; */
 653                 ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */
 654         }
 655
 656         period = period >> 1;/* Ensure equal or shorter period than requested */
 657         period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
 658
 659         ptd->dw2 |= period;
 660         ptd->dw4 = usof;
 661 }
 662
 663 static void create_ptd_int(struct isp1760_qh *qh,
 664                         struct isp1760_qtd *qtd, struct ptd *ptd)
 665 {
 666         create_ptd_atl(qh, qtd, ptd);
 667         transform_add_int(qh, qtd, ptd);
 668 }
 669
 670 static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
 671 __releases(priv->lock)
 672 __acquires(priv->lock)
 673 {
 674         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 675
 676         if (!urb->unlinked) {
 677                 if (urb->status == -EINPROGRESS)
 678                         urb->status = 0;
 679         }
 680
 681         if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
 682                 void *ptr;
 683                 for (ptr = urb->transfer_buffer;
 684                      ptr < urb->transfer_buffer + urb->transfer_buffer_length;
 685                      ptr += PAGE_SIZE)
 686                         flush_dcache_page(virt_to_page(ptr));
 687         }
 688
 689         /* complete() can reenter this HCD */
 690         usb_hcd_unlink_urb_from_ep(hcd, urb);
 691         spin_unlock(&priv->lock);
 692         usb_hcd_giveback_urb(hcd, urb, urb->status);
 693         spin_lock(&priv->lock);
 694 }
 695
 696 static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
 697                                                                 u8 packet_type)
 698 {
 699         struct isp1760_qtd *qtd;
 700
 701         qtd = kmem_cache_zalloc(qtd_cachep, flags);
 702         if (!qtd)
 703                 return NULL;
 704
 705         INIT_LIST_HEAD(&qtd->qtd_list);
 706         qtd->urb = urb;
 707         qtd->packet_type = packet_type;
 708         qtd->status = QTD_ENQUEUED;
 709         qtd->actual_length = 0;
 710
 711         return qtd;
 712 }
 713
 714 static void qtd_free(struct isp1760_qtd *qtd)
 715 {
 716         WARN_ON(qtd->payload_addr);
 717         kmem_cache_free(qtd_cachep, qtd);
 718 }
 719
 720 static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
 721                                 struct isp1760_slotinfo *slots,
 722                                 struct isp1760_qtd *qtd, struct isp1760_qh *qh,
 723                                 struct ptd *ptd)
 724 {
 725         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 726         int skip_map;
 727
 728         WARN_ON((slot < 0) || (slot > 31));
 729         WARN_ON(qtd->length && !qtd->payload_addr);
 730         WARN_ON(slots[slot].qtd);
 731         WARN_ON(slots[slot].qh);
 732         WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
 733
 734         /* Make sure done map has not triggered from some unlinked transfer */
 735         if (ptd_offset == ATL_PTD_OFFSET) {
 736                 priv->atl_done_map |= reg_read32(hcd->regs,
 737                                                 HC_ATL_PTD_DONEMAP_REG);
 738                 priv->atl_done_map &= ~(1 << slot);
 739         } else {
 740                 priv->int_done_map |= reg_read32(hcd->regs,
 741                                                 HC_INT_PTD_DONEMAP_REG);
 742                 priv->int_done_map &= ~(1 << slot);
 743         }
 744
 745         qh->slot = slot;
 746         qtd->status = QTD_XFER_STARTED;
 747         slots[slot].timestamp = jiffies;
 748         slots[slot].qtd = qtd;
 749         slots[slot].qh = qh;
 750         ptd_write(hcd->regs, ptd_offset, slot, ptd);
 751
 752         if (ptd_offset == ATL_PTD_OFFSET) {
 753                 skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 754                 skip_map &= ~(1 << qh->slot);
 755                 reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
 756         } else {
 757                 skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 758                 skip_map &= ~(1 << qh->slot);
 759                 reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
 760         }
 761 }
 762
 763 static int is_short_bulk(struct isp1760_qtd *qtd)
 764 {
 765         return (usb_pipebulk(qtd->urb->pipe) &&
 766                                         (qtd->actual_length < qtd->length));
 767 }
 768
 769 static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 770                                                 struct list_head *urb_list)
 771 {
 772         int last_qtd;
 773         struct isp1760_qtd *qtd, *qtd_next;
 774         struct urb_listitem *urb_listitem;
 775
 776         list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
 777                 if (qtd->status < QTD_XFER_COMPLETE)
 778                         break;
 779
 780                 last_qtd = last_qtd_of_urb(qtd, qh);
 781
 782                 if ((!last_qtd) && (qtd->status == QTD_RETIRE))
 783                         qtd_next->status = QTD_RETIRE;
 784
 785                 if (qtd->status == QTD_XFER_COMPLETE) {
 786                         if (qtd->actual_length) {
 787                                 switch (qtd->packet_type) {
 788                                 case IN_PID:
 789                                         mem_reads8(hcd->regs, qtd->payload_addr,
 790                                                         qtd->data_buffer,
 791                                                         qtd->actual_length);
 792                                         /* Fall through (?) */
 793                                 case OUT_PID:
 794                                         qtd->urb->actual_length +=
 795                                                         qtd->actual_length;
 796                                         /* Fall through ... */
 797                                 case SETUP_PID:
 798                                         break;
 799                                 }
 800                         }
 801
 802                         if (is_short_bulk(qtd)) {
 803                                 if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
 804                                         qtd->urb->status = -EREMOTEIO;
 805                                 if (!last_qtd)
 806                                         qtd_next->status = QTD_RETIRE;
 807                         }
 808                 }
 809
 810                 if (qtd->payload_addr)
 811                         free_mem(hcd, qtd);
 812
 813                 if (last_qtd) {
 814                         if ((qtd->status == QTD_RETIRE) &&
 815                                         (qtd->urb->status == -EINPROGRESS))
 816                                 qtd->urb->status = -EPIPE;
 817                         /* Defer calling of urb_done() since it releases lock */
 818                         urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
 819                                                                 GFP_ATOMIC);
 820                         if (unlikely(!urb_listitem))
 821                                 break; /* Try again on next call */
 822                         urb_listitem->urb = qtd->urb;
 823                         list_add_tail(&urb_listitem->urb_list, urb_list);
 824                 }
 825
 826                 list_del(&qtd->qtd_list);
 827                 qtd_free(qtd);
 828         }
 829 }
 830
 831 #define ENQUEUE_DEPTH   2
 832 static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
 833 {
 834         struct isp1760_hcd *priv = hcd_to_priv(hcd);
 835         int ptd_offset;
 836         struct isp1760_slotinfo *slots;
 837         int curr_slot, free_slot;
 838         int n;
 839         struct ptd ptd;
 840         struct isp1760_qtd *qtd;
 841
 842         if (unlikely(list_empty(&qh->qtd_list))) {
 843                 WARN_ON(1);
 844                 return;
 845         }
 846
 847         /* Make sure this endpoint's TT buffer is clean before queueing ptds */
 848         if (qh->tt_buffer_dirty)
 849                 return;
 850
 851         if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
 852                                                         qtd_list)->urb->pipe)) {
 853                 ptd_offset = INT_PTD_OFFSET;
 854                 slots = priv->int_slots;
 855         } else {
 856                 ptd_offset = ATL_PTD_OFFSET;
 857                 slots = priv->atl_slots;
 858         }
 859
 860         free_slot = -1;
 861         for (curr_slot = 0; curr_slot < 32; curr_slot++) {
 862                 if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
 863                         free_slot = curr_slot;
 864                 if (slots[curr_slot].qh == qh)
 865                         break;
 866         }
 867
 868         n = 0;
 869         list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
 870                 if (qtd->status == QTD_ENQUEUED) {
 871                         WARN_ON(qtd->payload_addr);
 872                         alloc_mem(hcd, qtd);
 873                         if ((qtd->length) && (!qtd->payload_addr))
 874                                 break;
 875
 876                         if ((qtd->length) &&
 877                             ((qtd->packet_type == SETUP_PID) ||
 878                              (qtd->packet_type == OUT_PID))) {
 879                                 mem_writes8(hcd->regs, qtd->payload_addr,
 880                                                 qtd->data_buffer, qtd->length);
 881                         }
 882
 883                         qtd->status = QTD_PAYLOAD_ALLOC;
 884                 }
 885
 886                 if (qtd->status == QTD_PAYLOAD_ALLOC) {
 887 /*
 888                         if ((curr_slot > 31) && (free_slot == -1))
 889                                 dev_dbg(hcd->self.controller, "%s: No slot "
 890                                         "available for transfer\n", __func__);
 891 */
 892                         /* Start xfer for this endpoint if not already done */
 893                         if ((curr_slot > 31) && (free_slot > -1)) {
 894                                 if (usb_pipeint(qtd->urb->pipe))
 895                                         create_ptd_int(qh, qtd, &ptd);
 896                                 else
 897                                         create_ptd_atl(qh, qtd, &ptd);
 898
 899                                 start_bus_transfer(hcd, ptd_offset, free_slot,
 900                                                         slots, qtd, qh, &ptd);
 901                                 curr_slot = free_slot;
 902                         }
 903
 904                         n++;
 905                         if (n >= ENQUEUE_DEPTH)
 906                                 break;
 907                 }
 908         }
 909 }
 910
 911 static void schedule_ptds(struct usb_hcd *hcd)
 912 {
 913         struct isp1760_hcd *priv;
 914         struct isp1760_qh *qh, *qh_next;
 915         struct list_head *ep_queue;
 916         LIST_HEAD(urb_list);
 917         struct urb_listitem *urb_listitem, *urb_listitem_next;
 918         int i;
 919
 920         if (!hcd) {
 921                 WARN_ON(1);
 922                 return;
 923         }
 924
 925         priv = hcd_to_priv(hcd);
 926
 927         /*
 928          * check finished/retired xfers, transfer payloads, call urb_done()
 929          */
 930         for (i = 0; i < QH_END; i++) {
 931                 ep_queue = &priv->qh_list[i];
 932                 list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
 933                         collect_qtds(hcd, qh, &urb_list);
 934                         if (list_empty(&qh->qtd_list))
 935                                 list_del(&qh->qh_list);
 936                 }
 937         }
 938
 939         list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
 940                                                                 urb_list) {
 941                 isp1760_urb_done(hcd, urb_listitem->urb);
 942                 kmem_cache_free(urb_listitem_cachep, urb_listitem);
 943         }
 944
 945         /*
 946          * Schedule packets for transfer.
 947          *
 948          * According to USB2.0 specification:
 949          *
 950          * 1st prio: interrupt xfers, up to 80 % of bandwidth
 951          * 2nd prio: control xfers
 952          * 3rd prio: bulk xfers
 953          *
 954          * ... but let's use a simpler scheme here (mostly because ISP1761 doc
 955          * is very unclear on how to prioritize traffic):
 956          *
 957          * 1) Enqueue any queued control transfers, as long as payload chip mem
 958          *    and PTD ATL slots are available.
 959          * 2) Enqueue any queued INT transfers, as long as payload chip mem
 960          *    and PTD INT slots are available.
 961          * 3) Enqueue any queued bulk transfers, as long as payload chip mem
 962          *    and PTD ATL slots are available.
 963          *
 964          * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
 965          * conservation of chip mem and performance.
 966          *
 967          * I'm sure this scheme could be improved upon!
 968          */
 969         for (i = 0; i < QH_END; i++) {
 970                 ep_queue = &priv->qh_list[i];
 971                 list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
 972                         enqueue_qtds(hcd, qh);
 973         }
 974 }
 975
 976 #define PTD_STATE_QTD_DONE      1
 977 #define PTD_STATE_QTD_RELOAD    2
 978 #define PTD_STATE_URB_RETIRE    3
 979
 980 static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
 981                                                                 struct urb *urb)
 982 {
 983         __dw dw4;
 984         int i;
 985
 986         dw4 = ptd->dw4;
 987         dw4 >>= 8;
 988
 989         /* FIXME: ISP1761 datasheet does not say what to do with these. Do we
 990            need to handle these errors? Is it done in hardware? */
 991
 992         if (ptd->dw3 & DW3_HALT_BIT) {
 993
 994                 urb->status = -EPROTO; /* Default unknown error */
 995
 996                 for (i = 0; i < 8; i++) {
 997                         switch (dw4 & 0x7) {
 998                         case INT_UNDERRUN:
 999                                 dev_dbg(hcd->self.controller, "%s: underrun "
1000                                                 "during uFrame %d\n",
1001                                                 __func__, i);
1002                                 urb->status = -ECOMM; /* Could not write data */
1003                                 break;
1004                         case INT_EXACT:
1005                                 dev_dbg(hcd->self.controller, "%s: transaction "
1006                                                 "error during uFrame %d\n",
1007                                                 __func__, i);
1008                                 urb->status = -EPROTO; /* timeout, bad CRC, PID
1009                                                           error etc. */
1010                                 break;
1011                         case INT_BABBLE:
1012                                 dev_dbg(hcd->self.controller, "%s: babble "
1013                                                 "error during uFrame %d\n",
1014                                                 __func__, i);
1015                                 urb->status = -EOVERFLOW;
1016                                 break;
1017                         }
1018                         dw4 >>= 3;
1019                 }
1020
1021                 return PTD_STATE_URB_RETIRE;
1022         }
1023
1024         return PTD_STATE_QTD_DONE;
1025 }
1026
1027 static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
1028                                                                 struct urb *urb)
1029 {
1030         WARN_ON(!ptd);
1031         if (ptd->dw3 & DW3_HALT_BIT) {
1032                 if (ptd->dw3 & DW3_BABBLE_BIT)
1033                         urb->status = -EOVERFLOW;
1034                 else if (FROM_DW3_CERR(ptd->dw3))
1035                         urb->status = -EPIPE;  /* Stall */
1036                 else if (ptd->dw3 & DW3_ERROR_BIT)
1037                         urb->status = -EPROTO; /* XactErr */
1038                 else
1039                         urb->status = -EPROTO; /* Unknown */
1040 /*
1041                 dev_dbg(hcd->self.controller, "%s: ptd error:\n"
1042                         "        dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
1043                         "        dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
1044                         __func__,
1045                         ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
1046                         ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
1047 */
1048                 return PTD_STATE_URB_RETIRE;
1049         }
1050
1051         if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
1052                 /* Transfer Error, *but* active and no HALT -> reload */
1053                 dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
1054                 return PTD_STATE_QTD_RELOAD;
1055         }
1056
1057         if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
1058                 /*
1059                  * NAKs are handled in HW by the chip. Usually if the
1060                  * device is not able to send data fast enough.
1061                  * This happens mostly on slower hardware.
1062                  */
1063                 return PTD_STATE_QTD_RELOAD;
1064         }
1065
1066         return PTD_STATE_QTD_DONE;
1067 }
1068
1069 static void handle_done_ptds(struct usb_hcd *hcd)
1070 {
1071         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1072         struct ptd ptd;
1073         struct isp1760_qh *qh;
1074         int slot;
1075         int state;
1076         struct isp1760_slotinfo *slots;
1077         u32 ptd_offset;
1078         struct isp1760_qtd *qtd;
1079         int modified;
1080         int skip_map;
1081
1082         skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
1083         priv->int_done_map &= ~skip_map;
1084         skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
1085         priv->atl_done_map &= ~skip_map;
1086
1087         modified = priv->int_done_map || priv->atl_done_map;
1088
1089         while (priv->int_done_map || priv->atl_done_map) {
1090                 if (priv->int_done_map) {
1091                         /* INT ptd */
1092                         slot = __ffs(priv->int_done_map);
1093                         priv->int_done_map &= ~(1 << slot);
1094                         slots = priv->int_slots;
1095                         /* This should not trigger, and could be removed if
1096                            noone have any problems with it triggering: */
1097                         if (!slots[slot].qh) {
1098                                 WARN_ON(1);
1099                                 continue;
1100                         }
1101                         ptd_offset = INT_PTD_OFFSET;
1102                         ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd);
1103                         state = check_int_transfer(hcd, &ptd,
1104                                                         slots[slot].qtd->urb);
1105                 } else {
1106                         /* ATL ptd */
1107                         slot = __ffs(priv->atl_done_map);
1108                         priv->atl_done_map &= ~(1 << slot);
1109                         slots = priv->atl_slots;
1110                         /* This should not trigger, and could be removed if
1111                            noone have any problems with it triggering: */
1112                         if (!slots[slot].qh) {
1113                                 WARN_ON(1);
1114                                 continue;
1115                         }
1116                         ptd_offset = ATL_PTD_OFFSET;
1117                         ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
1118                         state = check_atl_transfer(hcd, &ptd,
1119                                                         slots[slot].qtd->urb);
1120                 }
1121
1122                 qtd = slots[slot].qtd;
1123                 slots[slot].qtd = NULL;
1124                 qh = slots[slot].qh;
1125                 slots[slot].qh = NULL;
1126                 qh->slot = -1;
1127
1128                 WARN_ON(qtd->status != QTD_XFER_STARTED);
1129
1130                 switch (state) {
1131                 case PTD_STATE_QTD_DONE:
1132                         if ((usb_pipeint(qtd->urb->pipe)) &&
1133                                        (qtd->urb->dev->speed != USB_SPEED_HIGH))
1134                                 qtd->actual_length =
1135                                        FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
1136                         else
1137                                 qtd->actual_length =
1138                                         FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);
1139
1140                         qtd->status = QTD_XFER_COMPLETE;
1141                         if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
1142                                                         is_short_bulk(qtd))
1143                                 qtd = NULL;
1144                         else
1145                                 qtd = list_entry(qtd->qtd_list.next,
1146                                                         typeof(*qtd), qtd_list);
1147
1148                         qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
1149                         qh->ping = FROM_DW3_PING(ptd.dw3);
1150                         break;
1151
1152                 case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
1153                         qtd->status = QTD_PAYLOAD_ALLOC;
1154                         ptd.dw0 |= DW0_VALID_BIT;
1155                         /* RL counter = ERR counter */
1156                         ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
1157                         ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
1158                         ptd.dw3 &= ~TO_DW3_CERR(3);
1159                         ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
1160                         qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
1161                         qh->ping = FROM_DW3_PING(ptd.dw3);
1162                         break;
1163
1164                 case PTD_STATE_URB_RETIRE:
1165                         qtd->status = QTD_RETIRE;
1166                         if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
1167                                         (qtd->urb->status != -EPIPE) &&
1168                                         (qtd->urb->status != -EREMOTEIO)) {
1169                                 qh->tt_buffer_dirty = 1;
1170                                 if (usb_hub_clear_tt_buffer(qtd->urb))
1171                                         /* Clear failed; let's hope things work
1172                                            anyway */
1173                                         qh->tt_buffer_dirty = 0;
1174                         }
1175                         qtd = NULL;
1176                         qh->toggle = 0;
1177                         qh->ping = 0;
1178                         break;
1179
1180                 default:
1181                         WARN_ON(1);
1182                         continue;
1183                 }
1184
1185                 if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
1186                         if (slots == priv->int_slots) {
1187                                 if (state == PTD_STATE_QTD_RELOAD)
1188                                         dev_err(hcd->self.controller,
1189                                                 "%s: PTD_STATE_QTD_RELOAD on "
1190                                                 "interrupt packet\n", __func__);
1191                                 if (state != PTD_STATE_QTD_RELOAD)
1192                                         create_ptd_int(qh, qtd, &ptd);
1193                         } else {
1194                                 if (state != PTD_STATE_QTD_RELOAD)
1195                                         create_ptd_atl(qh, qtd, &ptd);
1196                         }
1197
1198                         start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
1199                                 qh, &ptd);
1200                 }
1201         }
1202
1203         if (modified)
1204                 schedule_ptds(hcd);
1205 }
1206
1207 static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
1208 {
1209         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1210         u32 imask;
1211         irqreturn_t irqret = IRQ_NONE;
1212
1213         spin_lock(&priv->lock);
1214
1215         if (!(hcd->state & HC_STATE_RUNNING))
1216                 goto leave;
1217
1218         imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
1219         if (unlikely(!imask))
1220                 goto leave;
1221         reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
1222
1223         priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
1224         priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
1225
1226         handle_done_ptds(hcd);
1227
1228         irqret = IRQ_HANDLED;
1229 leave:
1230         spin_unlock(&priv->lock);
1231
1232         return irqret;
1233 }
1234
1235 /*
1236  * Workaround for problem described in chip errata 2:
1237  *
1238  * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
1239  * One solution suggested in the errata is to use SOF interrupts _instead_of_
1240  * ATL done interrupts (the "instead of" might be important since it seems
1241  * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
1242  * to set the PTD's done bit in addition to not generating an interrupt!).
1243  *
1244  * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
1245  * done bit is not being set. This is bad - it blocks the endpoint until reboot.
1246  *
1247  * If we use SOF interrupts only, we get latency between ptd completion and the
1248  * actual handling. This is very noticeable in testusb runs which takes several
1249  * minutes longer without ATL interrupts.
1250  *
1251  * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
1252  * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
1253  * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
1254  * completed and its done map bit is set.
1255  *
1256  * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
1257  * not to cause too much lag when this HW bug occurs, while still hopefully
1258  * ensuring that the check does not falsely trigger.
1259  */
1260 #define SLOT_TIMEOUT 300
1261 #define SLOT_CHECK_PERIOD 200
1262 static struct timer_list errata2_timer;
1263
1264 static void errata2_function(unsigned long data)
1265 {
1266         struct usb_hcd *hcd = (struct usb_hcd *) data;
1267         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1268         int slot;
1269         struct ptd ptd;
1270         unsigned long spinflags;
1271
1272         spin_lock_irqsave(&priv->lock, spinflags);
1273
1274         for (slot = 0; slot < 32; slot++)
1275                 if (priv->atl_slots[slot].qh && time_after(jiffies,
1276                                         priv->atl_slots[slot].timestamp +
1277                                         SLOT_TIMEOUT * HZ / 1000)) {
1278                         ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
1279                         if (!FROM_DW0_VALID(ptd.dw0) &&
1280                                         !FROM_DW3_ACTIVE(ptd.dw3))
1281                                 priv->atl_done_map |= 1 << slot;
1282                 }
1283
1284         if (priv->atl_done_map)
1285                 handle_done_ptds(hcd);
1286
1287         spin_unlock_irqrestore(&priv->lock, spinflags);
1288
1289         errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
1290         add_timer(&errata2_timer);
1291 }
1292
1293 static int isp1760_run(struct usb_hcd *hcd)
1294 {
1295         int retval;
1296         u32 temp;
1297         u32 command;
1298         u32 chipid;
1299
1300         hcd->uses_new_polling = 1;
1301
1302         hcd->state = HC_STATE_RUNNING;
1303
1304         /* Set PTD interrupt AND & OR maps */
1305         reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
1306         reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
1307         reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
1308         reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
1309         reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
1310         reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
1311         /* step 23 passed */
1312
1313         temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
1314         reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
1315
1316         command = reg_read32(hcd->regs, HC_USBCMD);
1317         command &= ~(CMD_LRESET|CMD_RESET);
1318         command |= CMD_RUN;
1319         reg_write32(hcd->regs, HC_USBCMD, command);
1320
1321         retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
1322         if (retval)
1323                 return retval;
1324
1325         /*
1326          * XXX
1327          * Spec says to write FLAG_CF as last config action, priv code grabs
1328          * the semaphore while doing so.
1329          */
1330         down_write(&ehci_cf_port_reset_rwsem);
1331         reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
1332
1333         retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
1334         up_write(&ehci_cf_port_reset_rwsem);
1335         if (retval)
1336                 return retval;
1337
1338         init_timer(&errata2_timer);
1339         errata2_timer.function = errata2_function;
1340         errata2_timer.data = (unsigned long) hcd;
1341         errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
1342         add_timer(&errata2_timer);
1343
1344         chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
1345         dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
1346                                         chipid & 0xffff, chipid >> 16);
1347
1348         /* PTD Register Init Part 2, Step 28 */
1349
1350         /* Setup registers controlling PTD checking */
1351         reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
1352         reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
1353         reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
1354         reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
1355         reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
1356         reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
1357         reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
1358                                                 ATL_BUF_FILL | INT_BUF_FILL);
1359
1360         /* GRR this is run-once init(), being done every time the HC starts.
1361          * So long as they're part of class devices, we can't do it init()
1362          * since the class device isn't created that early.
1363          */
1364         return 0;
1365 }
1366
1367 static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
1368 {
1369         qtd->data_buffer = databuffer;
1370
1371         if (len > MAX_PAYLOAD_SIZE)
1372                 len = MAX_PAYLOAD_SIZE;
1373         qtd->length = len;
1374
1375         return qtd->length;
1376 }
1377
1378 static void qtd_list_free(struct list_head *qtd_list)
1379 {
1380         struct isp1760_qtd *qtd, *qtd_next;
1381
1382         list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
1383                 list_del(&qtd->qtd_list);
1384                 qtd_free(qtd);
1385         }
1386 }
1387
1388 /*
1389  * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
1390  * Also calculate the PID type (SETUP/IN/OUT) for each packet.
1391  */
1392 #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
1393 static void packetize_urb(struct usb_hcd *hcd,
1394                 struct urb *urb, struct list_head *head, gfp_t flags)
1395 {
1396         struct isp1760_qtd *qtd;
1397         void *buf;
1398         int len, maxpacketsize;
1399         u8 packet_type;
1400
1401         /*
1402          * URBs map to sequences of QTDs:  one logical transaction
1403          */
1404
1405         if (!urb->transfer_buffer && urb->transfer_buffer_length) {
1406                 /* XXX This looks like usb storage / SCSI bug */
1407                 dev_err(hcd->self.controller,
1408                                 "buf is null, dma is %08lx len is %d\n",
1409                                 (long unsigned)urb->transfer_dma,
1410                                 urb->transfer_buffer_length);
1411                 WARN_ON(1);
1412         }
1413
1414         if (usb_pipein(urb->pipe))
1415                 packet_type = IN_PID;
1416         else
1417                 packet_type = OUT_PID;
1418
1419         if (usb_pipecontrol(urb->pipe)) {
1420                 qtd = qtd_alloc(flags, urb, SETUP_PID);
1421                 if (!qtd)
1422                         goto cleanup;
1423                 qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
1424                 list_add_tail(&qtd->qtd_list, head);
1425
1426                 /* for zero length DATA stages, STATUS is always IN */
1427                 if (urb->transfer_buffer_length == 0)
1428                         packet_type = IN_PID;
1429         }
1430
1431         maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe,
1432                                                 usb_pipeout(urb->pipe)));
1433
1434         /*
1435          * buffer gets wrapped in one or more qtds;
1436          * last one may be "short" (including zero len)
1437          * and may serve as a control status ack
1438          */
1439         buf = urb->transfer_buffer;
1440         len = urb->transfer_buffer_length;
1441
1442         for (;;) {
1443                 int this_qtd_len;
1444
1445                 qtd = qtd_alloc(flags, urb, packet_type);
1446                 if (!qtd)
1447                         goto cleanup;
1448                 this_qtd_len = qtd_fill(qtd, buf, len);
1449                 list_add_tail(&qtd->qtd_list, head);
1450
1451                 len -= this_qtd_len;
1452                 buf += this_qtd_len;
1453
1454                 if (len <= 0)
1455                         break;
1456         }
1457
1458         /*
1459          * control requests may need a terminating data "status" ack;
1460          * bulk ones may need a terminating short packet (zero length).
1461          */
1462         if (urb->transfer_buffer_length != 0) {
1463                 int one_more = 0;
1464
1465                 if (usb_pipecontrol(urb->pipe)) {
1466                         one_more = 1;
1467                         if (packet_type == IN_PID)
1468                                 packet_type = OUT_PID;
1469                         else
1470                                 packet_type = IN_PID;
1471                 } else if (usb_pipebulk(urb->pipe)
1472                                 && (urb->transfer_flags & URB_ZERO_PACKET)
1473                                 && !(urb->transfer_buffer_length %
1474                                                         maxpacketsize)) {
1475                         one_more = 1;
1476                 }
1477                 if (one_more) {
1478                         qtd = qtd_alloc(flags, urb, packet_type);
1479                         if (!qtd)
1480                                 goto cleanup;
1481
1482                         /* never any data in such packets */
1483                         qtd_fill(qtd, NULL, 0);
1484                         list_add_tail(&qtd->qtd_list, head);
1485                 }
1486         }
1487
1488         return;
1489
1490 cleanup:
1491         qtd_list_free(head);
1492 }
1493
1494 static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
1495                 gfp_t mem_flags)
1496 {
1497         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1498         struct list_head *ep_queue;
1499         struct isp1760_qh *qh, *qhit;
1500         unsigned long spinflags;
1501         LIST_HEAD(new_qtds);
1502         int retval;
1503         int qh_in_queue;
1504
1505         switch (usb_pipetype(urb->pipe)) {
1506         case PIPE_CONTROL:
1507                 ep_queue = &priv->qh_list[QH_CONTROL];
1508                 break;
1509         case PIPE_BULK:
1510                 ep_queue = &priv->qh_list[QH_BULK];
1511                 break;
1512         case PIPE_INTERRUPT:
1513                 if (urb->interval < 0)
1514                         return -EINVAL;
1515                 /* FIXME: Check bandwidth  */
1516                 ep_queue = &priv->qh_list[QH_INTERRUPT];
1517                 break;
1518         case PIPE_ISOCHRONOUS:
1519                 dev_err(hcd->self.controller, "%s: isochronous USB packets "
1520                                                         "not yet supported\n",
1521                                                         __func__);
1522                 return -EPIPE;
1523         default:
1524                 dev_err(hcd->self.controller, "%s: unknown pipe type\n",
1525                                                         __func__);
1526                 return -EPIPE;
1527         }
1528
1529         if (usb_pipein(urb->pipe))
1530                 urb->actual_length = 0;
1531
1532         packetize_urb(hcd, urb, &new_qtds, mem_flags);
1533         if (list_empty(&new_qtds))
1534                 return -ENOMEM;
1535
1536         retval = 0;
1537         spin_lock_irqsave(&priv->lock, spinflags);
1538
1539         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
1540                 retval = -ESHUTDOWN;
1541                 qtd_list_free(&new_qtds);
1542                 goto out;
1543         }
1544         retval = usb_hcd_link_urb_to_ep(hcd, urb);
1545         if (retval) {
1546                 qtd_list_free(&new_qtds);
1547                 goto out;
1548         }
1549
1550         qh = urb->ep->hcpriv;
1551         if (qh) {
1552                 qh_in_queue = 0;
1553                 list_for_each_entry(qhit, ep_queue, qh_list) {
1554                         if (qhit == qh) {
1555                                 qh_in_queue = 1;
1556                                 break;
1557                         }
1558                 }
1559                 if (!qh_in_queue)
1560                         list_add_tail(&qh->qh_list, ep_queue);
1561         } else {
1562                 qh = qh_alloc(GFP_ATOMIC);
1563                 if (!qh) {
1564                         retval = -ENOMEM;
1565                         usb_hcd_unlink_urb_from_ep(hcd, urb);
1566                         qtd_list_free(&new_qtds);
1567                         goto out;
1568                 }
1569                 list_add_tail(&qh->qh_list, ep_queue);
1570                 urb->ep->hcpriv = qh;
1571         }
1572
1573         list_splice_tail(&new_qtds, &qh->qtd_list);
1574         schedule_ptds(hcd);
1575
1576 out:
1577         spin_unlock_irqrestore(&priv->lock, spinflags);
1578         return retval;
1579 }
1580
1581 static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
1582                 struct isp1760_qh *qh)
1583 {
1584         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1585         int skip_map;
1586
1587         WARN_ON(qh->slot == -1);
1588
1589         /* We need to forcefully reclaim the slot since some transfers never
1590            return, e.g. interrupt transfers and NAKed bulk transfers. */
1591         if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
1592                 skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
1593                 skip_map |= (1 << qh->slot);
1594                 reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
1595                 priv->atl_slots[qh->slot].qh = NULL;
1596                 priv->atl_slots[qh->slot].qtd = NULL;
1597         } else {
1598                 skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
1599                 skip_map |= (1 << qh->slot);
1600                 reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
1601                 priv->int_slots[qh->slot].qh = NULL;
1602                 priv->int_slots[qh->slot].qtd = NULL;
1603         }
1604
1605         qh->slot = -1;
1606 }
1607
1608 /*
1609  * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
1610  * any active transfer belonging to the urb in the process.
1611  */
1612 static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
1613                                                 struct isp1760_qtd *qtd)
1614 {
1615         struct urb *urb;
1616         int urb_was_running;
1617
1618         urb = qtd->urb;
1619         urb_was_running = 0;
1620         list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
1621                 if (qtd->urb != urb)
1622                         break;
1623
1624                 if (qtd->status >= QTD_XFER_STARTED)
1625                         urb_was_running = 1;
1626                 if (last_qtd_of_urb(qtd, qh) &&
1627                                         (qtd->status >= QTD_XFER_COMPLETE))
1628                         urb_was_running = 0;
1629
1630                 if (qtd->status == QTD_XFER_STARTED)
1631                         kill_transfer(hcd, urb, qh);
1632                 qtd->status = QTD_RETIRE;
1633         }
1634
1635         if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
1636                 qh->tt_buffer_dirty = 1;
1637                 if (usb_hub_clear_tt_buffer(urb))
1638                         /* Clear failed; let's hope things work anyway */
1639                         qh->tt_buffer_dirty = 0;
1640         }
1641 }
1642
1643 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
1644                 int status)
1645 {
1646         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1647         unsigned long spinflags;
1648         struct isp1760_qh *qh;
1649         struct isp1760_qtd *qtd;
1650         int retval = 0;
1651
1652         spin_lock_irqsave(&priv->lock, spinflags);
1653         retval = usb_hcd_check_unlink_urb(hcd, urb, status);
1654         if (retval)
1655                 goto out;
1656
1657         qh = urb->ep->hcpriv;
1658         if (!qh) {
1659                 retval = -EINVAL;
1660                 goto out;
1661         }
1662
1663         list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
1664                 if (qtd->urb == urb) {
1665                         dequeue_urb_from_qtd(hcd, qh, qtd);
1666                         list_move(&qtd->qtd_list, &qh->qtd_list);
1667                         break;
1668                 }
1669
1670         urb->status = status;
1671         schedule_ptds(hcd);
1672
1673 out:
1674         spin_unlock_irqrestore(&priv->lock, spinflags);
1675         return retval;
1676 }
1677
1678 static void isp1760_endpoint_disable(struct usb_hcd *hcd,
1679                 struct usb_host_endpoint *ep)
1680 {
1681         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1682         unsigned long spinflags;
1683         struct isp1760_qh *qh, *qh_iter;
1684         int i;
1685
1686         spin_lock_irqsave(&priv->lock, spinflags);
1687
1688         qh = ep->hcpriv;
1689         if (!qh)
1690                 goto out;
1691
1692         WARN_ON(!list_empty(&qh->qtd_list));
1693
1694         for (i = 0; i < QH_END; i++)
1695                 list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
1696                         if (qh_iter == qh) {
1697                                 list_del(&qh_iter->qh_list);
1698                                 i = QH_END;
1699                                 break;
1700                         }
1701         qh_free(qh);
1702         ep->hcpriv = NULL;
1703
1704         schedule_ptds(hcd);
1705
1706 out:
1707         spin_unlock_irqrestore(&priv->lock, spinflags);
1708 }
1709
1710 static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
1711 {
1712         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1713         u32 temp, status = 0;
1714         u32 mask;
1715         int retval = 1;
1716         unsigned long flags;
1717
1718         /* if !PM, root hub timers won't get shut down ... */
1719         if (!HC_IS_RUNNING(hcd->state))
1720                 return 0;
1721
1722         /* init status to no-changes */
1723         buf[0] = 0;
1724         mask = PORT_CSC;
1725
1726         spin_lock_irqsave(&priv->lock, flags);
1727         temp = reg_read32(hcd->regs, HC_PORTSC1);
1728
1729         if (temp & PORT_OWNER) {
1730                 if (temp & PORT_CSC) {
1731                         temp &= ~PORT_CSC;
1732                         reg_write32(hcd->regs, HC_PORTSC1, temp);
1733                         goto done;
1734                 }
1735         }
1736
1737         /*
1738          * Return status information even for ports with OWNER set.
1739          * Otherwise hub_wq wouldn't see the disconnect event when a
1740          * high-speed device is switched over to the companion
1741          * controller by the user.
1742          */
1743
1744         if ((temp & mask) != 0
1745                         || ((temp & PORT_RESUME) != 0
1746                                 && time_after_eq(jiffies,
1747                                         priv->reset_done))) {
1748                 buf [0] |= 1 << (0 + 1);
1749                 status = STS_PCD;
1750         }
1751         /* FIXME autosuspend idle root hubs */
1752 done:
1753         spin_unlock_irqrestore(&priv->lock, flags);
1754         return status ? retval : 0;
1755 }
1756
1757 static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
1758                 struct usb_hub_descriptor *desc)
1759 {
1760         int ports = HCS_N_PORTS(priv->hcs_params);
1761         u16 temp;
1762
1763         desc->bDescriptorType = 0x29;
1764         /* priv 1.0, 2.3.9 says 20ms max */
1765         desc->bPwrOn2PwrGood = 10;
1766         desc->bHubContrCurrent = 0;
1767
1768         desc->bNbrPorts = ports;
1769         temp = 1 + (ports / 8);
1770         desc->bDescLength = 7 + 2 * temp;
1771
1772         /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
1773         memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
1774         memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
1775
1776         /* per-port overcurrent reporting */
1777         temp = 0x0008;
1778         if (HCS_PPC(priv->hcs_params))
1779                 /* per-port power control */
1780                 temp |= 0x0001;
1781         else
1782                 /* no power switching */
1783                 temp |= 0x0002;
1784         desc->wHubCharacteristics = cpu_to_le16(temp);
1785 }
1786
1787 #define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
1788
1789 static int check_reset_complete(struct usb_hcd *hcd, int index,
1790                 int port_status)
1791 {
1792         if (!(port_status & PORT_CONNECT))
1793                 return port_status;
1794
1795         /* if reset finished and it's still not enabled -- handoff */
1796         if (!(port_status & PORT_PE)) {
1797
1798                 dev_info(hcd->self.controller,
1799                                         "port %d full speed --> companion\n",
1800                                         index + 1);
1801
1802                 port_status |= PORT_OWNER;
1803                 port_status &= ~PORT_RWC_BITS;
1804                 reg_write32(hcd->regs, HC_PORTSC1, port_status);
1805
1806         } else
1807                 dev_info(hcd->self.controller, "port %d high speed\n",
1808                                                                 index + 1);
1809
1810         return port_status;
1811 }
1812
1813 static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
1814                 u16 wValue, u16 wIndex, char *buf, u16 wLength)
1815 {
1816         struct isp1760_hcd *priv = hcd_to_priv(hcd);
1817         int ports = HCS_N_PORTS(priv->hcs_params);
1818         u32 temp, status;
1819         unsigned long flags;
1820         int retval = 0;
1821         unsigned selector;
1822
1823         /*
1824          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
1825          * HCS_INDICATOR may say we can change LEDs to off/amber/green.
1826          * (track current state ourselves) ... blink for diagnostics,
1827          * power, "this is the one", etc.  EHCI spec supports this.
1828          */
1829
1830         spin_lock_irqsave(&priv->lock, flags);
1831         switch (typeReq) {
1832         case ClearHubFeature:
1833                 switch (wValue) {
1834                 case C_HUB_LOCAL_POWER:
1835                 case C_HUB_OVER_CURRENT:
1836                         /* no hub-wide feature/status flags */
1837                         break;
1838                 default:
1839                         goto error;
1840                 }
1841                 break;
1842         case ClearPortFeature:
1843                 if (!wIndex || wIndex > ports)
1844                         goto error;
1845                 wIndex--;
1846                 temp = reg_read32(hcd->regs, HC_PORTSC1);
1847
1848                 /*
1849                  * Even if OWNER is set, so the port is owned by the
1850                  * companion controller, hub_wq needs to be able to clear
1851                  * the port-change status bits (especially
1852                  * USB_PORT_STAT_C_CONNECTION).
1853                  */
1854
1855                 switch (wValue) {
1856                 case USB_PORT_FEAT_ENABLE:
1857                         reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE);
1858                         break;
1859                 case USB_PORT_FEAT_C_ENABLE:
1860                         /* XXX error? */
1861                         break;
1862                 case USB_PORT_FEAT_SUSPEND:
1863                         if (temp & PORT_RESET)
1864                                 goto error;
1865
1866                         if (temp & PORT_SUSPEND) {
1867                                 if ((temp & PORT_PE) == 0)
1868                                         goto error;
1869                                 /* resume signaling for 20 msec */
1870                                 temp &= ~(PORT_RWC_BITS);
1871                                 reg_write32(hcd->regs, HC_PORTSC1,
1872                                                         temp | PORT_RESUME);
1873                                 priv->reset_done = jiffies +
1874                                         msecs_to_jiffies(20);
1875                         }
1876                         break;
1877                 case USB_PORT_FEAT_C_SUSPEND:
1878                         /* we auto-clear this feature */
1879                         break;
1880                 case USB_PORT_FEAT_POWER:
1881                         if (HCS_PPC(priv->hcs_params))
1882                                 reg_write32(hcd->regs, HC_PORTSC1,
1883                                                         temp & ~PORT_POWER);
1884                         break;
1885                 case USB_PORT_FEAT_C_CONNECTION:
1886                         reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC);
1887                         break;
1888                 case USB_PORT_FEAT_C_OVER_CURRENT:
1889                         /* XXX error ?*/
1890                         break;
1891                 case USB_PORT_FEAT_C_RESET:
1892                         /* GetPortStatus clears reset */
1893                         break;
1894                 default:
1895                         goto error;
1896                 }
1897                 reg_read32(hcd->regs, HC_USBCMD);
1898                 break;
1899         case GetHubDescriptor:
1900                 isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
1901                         buf);
1902                 break;
1903         case GetHubStatus:
1904                 /* no hub-wide feature/status flags */
1905                 memset(buf, 0, 4);
1906                 break;
1907         case GetPortStatus:
1908                 if (!wIndex || wIndex > ports)
1909                         goto error;
1910                 wIndex--;
1911                 status = 0;
1912                 temp = reg_read32(hcd->regs, HC_PORTSC1);
1913
1914                 /* wPortChange bits */
1915                 if (temp & PORT_CSC)
1916                         status |= USB_PORT_STAT_C_CONNECTION << 16;
1917
1918
1919                 /* whoever resumes must GetPortStatus to complete it!! */
1920                 if (temp & PORT_RESUME) {
1921                         dev_err(hcd->self.controller, "Port resume should be skipped.\n");
1922
1923                         /* Remote Wakeup received? */
1924                         if (!priv->reset_done) {
1925                                 /* resume signaling for 20 msec */
1926                                 priv->reset_done = jiffies
1927                                                 + msecs_to_jiffies(20);
1928                                 /* check the port again */
1929                                 mod_timer(&hcd->rh_timer, priv->reset_done);
1930                         }
1931
1932                         /* resume completed? */
1933                         else if (time_after_eq(jiffies,
1934                                         priv->reset_done)) {
1935                                 status |= USB_PORT_STAT_C_SUSPEND << 16;
1936                                 priv->reset_done = 0;
1937
1938                                 /* stop resume signaling */
1939                                 temp = reg_read32(hcd->regs, HC_PORTSC1);
1940                                 reg_write32(hcd->regs, HC_PORTSC1,
1941                                         temp & ~(PORT_RWC_BITS | PORT_RESUME));
1942                                 retval = handshake(hcd, HC_PORTSC1,
1943                                            PORT_RESUME, 0, 2000 /* 2msec */);
1944                                 if (retval != 0) {
1945                                         dev_err(hcd->self.controller,
1946                                                 "port %d resume error %d\n",
1947                                                 wIndex + 1, retval);
1948                                         goto error;
1949                                 }
1950                                 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
1951                         }
1952                 }
1953
1954                 /* whoever resets must GetPortStatus to complete it!! */
1955                 if ((temp & PORT_RESET)
1956                                 && time_after_eq(jiffies,
1957                                         priv->reset_done)) {
1958                         status |= USB_PORT_STAT_C_RESET << 16;
1959                         priv->reset_done = 0;
1960
1961                         /* force reset to complete */
1962                         reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET);
1963                         /* REVISIT:  some hardware needs 550+ usec to clear
1964                          * this bit; seems too long to spin routinely...
1965                          */
1966                         retval = handshake(hcd, HC_PORTSC1,
1967                                         PORT_RESET, 0, 750);
1968                         if (retval != 0) {
1969                                 dev_err(hcd->self.controller, "port %d reset error %d\n",
1970                                                 wIndex + 1, retval);
1971                                 goto error;
1972                         }
1973
1974                         /* see what we found out */
1975                         temp = check_reset_complete(hcd, wIndex,
1976                                         reg_read32(hcd->regs, HC_PORTSC1));
1977                 }
1978                 /*
1979                  * Even if OWNER is set, there's no harm letting hub_wq
1980                  * see the wPortStatus values (they should all be 0 except
1981                  * for PORT_POWER anyway).
1982                  */
1983
1984                 if (temp & PORT_OWNER)
1985                         dev_err(hcd->self.controller, "PORT_OWNER is set\n");
1986
1987                 if (temp & PORT_CONNECT) {
1988                         status |= USB_PORT_STAT_CONNECTION;
1989                         /* status may be from integrated TT */
1990                         status |= USB_PORT_STAT_HIGH_SPEED;
1991                 }
1992                 if (temp & PORT_PE)
1993                         status |= USB_PORT_STAT_ENABLE;
1994                 if (temp & (PORT_SUSPEND|PORT_RESUME))
1995                         status |= USB_PORT_STAT_SUSPEND;
1996                 if (temp & PORT_RESET)
1997                         status |= USB_PORT_STAT_RESET;
1998                 if (temp & PORT_POWER)
1999                         status |= USB_PORT_STAT_POWER;
2000
2001                 put_unaligned(cpu_to_le32(status), (__le32 *) buf);
2002                 break;
2003         case SetHubFeature:
2004                 switch (wValue) {
2005                 case C_HUB_LOCAL_POWER:
2006                 case C_HUB_OVER_CURRENT:
2007                         /* no hub-wide feature/status flags */
2008                         break;
2009                 default:
2010                         goto error;
2011                 }
2012                 break;
2013         case SetPortFeature:
2014                 selector = wIndex >> 8;
2015                 wIndex &= 0xff;
2016                 if (!wIndex || wIndex > ports)
2017                         goto error;
2018                 wIndex--;
2019                 temp = reg_read32(hcd->regs, HC_PORTSC1);
2020                 if (temp & PORT_OWNER)
2021                         break;
2022
2023 /*              temp &= ~PORT_RWC_BITS; */
2024                 switch (wValue) {
2025                 case USB_PORT_FEAT_ENABLE:
2026                         reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE);
2027                         break;
2028
2029                 case USB_PORT_FEAT_SUSPEND:
2030                         if ((temp & PORT_PE) == 0
2031                                         || (temp & PORT_RESET) != 0)
2032                                 goto error;
2033
2034                         reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND);
2035                         break;
2036                 case USB_PORT_FEAT_POWER:
2037                         if (HCS_PPC(priv->hcs_params))
2038                                 reg_write32(hcd->regs, HC_PORTSC1,
2039                                                         temp | PORT_POWER);
2040                         break;
2041                 case USB_PORT_FEAT_RESET:
2042                         if (temp & PORT_RESUME)
2043                                 goto error;
2044                         /* line status bits may report this as low speed,
2045                          * which can be fine if this root hub has a
2046                          * transaction translator built in.
2047                          */
2048                         if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
2049                                         && PORT_USB11(temp)) {
2050                                 temp |= PORT_OWNER;
2051                         } else {
2052                                 temp |= PORT_RESET;
2053                                 temp &= ~PORT_PE;
2054
2055                                 /*
2056                                  * caller must wait, then call GetPortStatus
2057                                  * usb 2.0 spec says 50 ms resets on root
2058                                  */
2059                                 priv->reset_done = jiffies +
2060                                         msecs_to_jiffies(50);
2061                         }
2062                         reg_write32(hcd->regs, HC_PORTSC1, temp);
2063                         break;
2064                 default:
2065                         goto error;
2066                 }
2067                 reg_read32(hcd->regs, HC_USBCMD);
2068                 break;
2069
2070         default:
2071 error:
2072                 /* "stall" on error */
2073                 retval = -EPIPE;
2074         }
2075         spin_unlock_irqrestore(&priv->lock, flags);
2076         return retval;
2077 }
2078
2079 static int isp1760_get_frame(struct usb_hcd *hcd)
2080 {
2081         struct isp1760_hcd *priv = hcd_to_priv(hcd);
2082         u32 fr;
2083
2084         fr = reg_read32(hcd->regs, HC_FRINDEX);
2085         return (fr >> 3) % priv->periodic_size;
2086 }
2087
2088 static void isp1760_stop(struct usb_hcd *hcd)
2089 {
2090         struct isp1760_hcd *priv = hcd_to_priv(hcd);
2091         u32 temp;
2092
2093         del_timer(&errata2_timer);
2094
2095         isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
2096                         NULL, 0);
2097         mdelay(20);
2098
2099         spin_lock_irq(&priv->lock);
2100         ehci_reset(hcd);
2101         /* Disable IRQ */
2102         temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
2103         reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
2104         spin_unlock_irq(&priv->lock);
2105
2106         reg_write32(hcd->regs, HC_CONFIGFLAG, 0);
2107 }
2108
2109 static void isp1760_shutdown(struct usb_hcd *hcd)
2110 {
2111         u32 command, temp;
2112
2113         isp1760_stop(hcd);
2114         temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
2115         reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
2116
2117         command = reg_read32(hcd->regs, HC_USBCMD);
2118         command &= ~CMD_RUN;
2119         reg_write32(hcd->regs, HC_USBCMD, command);
2120 }
2121
2122 static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
2123                                                 struct usb_host_endpoint *ep)
2124 {
2125         struct isp1760_hcd *priv = hcd_to_priv(hcd);
2126         struct isp1760_qh *qh = ep->hcpriv;
2127         unsigned long spinflags;
2128
2129         if (!qh)
2130                 return;
2131
2132         spin_lock_irqsave(&priv->lock, spinflags);
2133         qh->tt_buffer_dirty = 0;
2134         schedule_ptds(hcd);
2135         spin_unlock_irqrestore(&priv->lock, spinflags);
2136 }
2137
2138
2139 static const struct hc_driver isp1760_hc_driver = {
2140         .description            = "isp1760-hcd",
2141         .product_desc           = "NXP ISP1760 USB Host Controller",
2142         .hcd_priv_size          = sizeof(struct isp1760_hcd *),
2143         .irq                    = isp1760_irq,
2144         .flags                  = HCD_MEMORY | HCD_USB2,
2145         .reset                  = isp1760_hc_setup,
2146         .start                  = isp1760_run,
2147         .stop                   = isp1760_stop,
2148         .shutdown               = isp1760_shutdown,
2149         .urb_enqueue            = isp1760_urb_enqueue,
2150         .urb_dequeue            = isp1760_urb_dequeue,
2151         .endpoint_disable       = isp1760_endpoint_disable,
2152         .get_frame_number       = isp1760_get_frame,
2153         .hub_status_data        = isp1760_hub_status_data,
2154         .hub_control            = isp1760_hub_control,
2155         .clear_tt_buffer_complete       = isp1760_clear_tt_buffer_complete,
2156 };
2157
2158 int __init isp1760_init_kmem_once(void)
2159 {
2160         urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
2161                         sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
2162                         SLAB_MEM_SPREAD, NULL);
2163
2164         if (!urb_listitem_cachep)
2165                 return -ENOMEM;
2166
2167         qtd_cachep = kmem_cache_create("isp1760_qtd",
2168                         sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
2169                         SLAB_MEM_SPREAD, NULL);
2170
2171         if (!qtd_cachep)
2172                 return -ENOMEM;
2173
2174         qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
2175                         0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
2176
2177         if (!qh_cachep) {
2178                 kmem_cache_destroy(qtd_cachep);
2179                 return -ENOMEM;
2180         }
2181
2182         return 0;
2183 }
2184
2185 void isp1760_deinit_kmem_cache(void)
2186 {
2187         kmem_cache_destroy(qtd_cachep);
2188         kmem_cache_destroy(qh_cachep);
2189         kmem_cache_destroy(urb_listitem_cachep);
2190 }
2191
2192 int isp1760_hcd_register(struct isp1760_hcd *priv, void __iomem *regs,
2193                          struct resource *mem, int irq, unsigned long irqflags,
2194                          struct device *dev)
2195 {
2196         struct usb_hcd *hcd;
2197         int ret;
2198
2199         hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
2200         if (!hcd)
2201                 return -ENOMEM;
2202
2203         *(struct isp1760_hcd **)hcd->hcd_priv = priv;
2204
2205         priv->hcd = hcd;
2206
2207         init_memory(priv);
2208
2209         hcd->irq = irq;
2210         hcd->regs = regs;
2211         hcd->rsrc_start = mem->start;
2212         hcd->rsrc_len = resource_size(mem);
2213
2214         ret = usb_add_hcd(hcd, irq, irqflags);
2215         if (ret)
2216                 goto error;
2217
2218         device_wakeup_enable(hcd->self.controller);
2219
2220         return 0;
2221
2222 error:
2223         usb_put_hcd(hcd);
2224         return ret;
2225 }
2226
2227 void isp1760_hcd_unregister(struct isp1760_hcd *priv)
2228 {
2229         if (!priv->hcd)
2230                 return;
2231
2232         usb_remove_hcd(priv->hcd);
2233         usb_put_hcd(priv->hcd);
2234 }